Search NASA⌕ Search

SEARCH · Search NASA

Results for “liquid interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

The scaling of kinetic and transport behaviors in the solution-phase chemistry of a plasma–liquid interface

The reactions at a plasma–liquid interface often involve species such as the solvated electron or the hydroxyl radical, which initiate the reduction or oxidation of solution-phase reactants (so-called scavengers) or are consumed by their own second-order recombination. Here, the mathematical scaling of the reaction–diffusion equations at the interface is used to obtain a characteristic time that can be used to determine the transition from highly efficient scavenger reduction or oxidation to lower efficiencies due to transport limitations. The characteristic time (tc) is validated using numerical solutions of the reaction–diffusion equations. When the scavenger kinetics are faster than second-order recombination, this characteristic transition time scales proportionally with the scavenger diffusivity (Ds) and the square of the scavenger bulk concentration (SB) and inversely proportional to the electron flux (J) squared; that is, t c = D s S B 2 F 2 /J 2 , where F is Faraday’s constant. However, when the scavenger kinetics are comparable or slower than second-order recombination, this scaling does not hold. Extending this analysis to three-dimensional systems shows that the profile of the electron flux on the surface affects the spatial location where reactions are most effective. Finally, the assessment of the implications of these behaviors for the reactor design highlights how effectively controlling the electron flux and solution transport may be necessary to improve the efficiency of scavenger reactions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Resolving amorphous solid-liquid interfaces by atomic force microscopy

Recent advancements in liquid atomic force microscopy make it an ideal technique for probing the structure of solid-liquid interfaces. Here, we present a structural study of a two-dimensional amorphous silica bilayer immersed in an aqueous solution utilizing liquid atomic force microscopy with sub-nanometer resolution. Structures show good agreement with atomically resolved ultra-high vacuum scanning tunneling microscopy images obtained on the same sample system, owing to the structural stability of the silica bilayer and the imaging clarity from the two-dimensional sample system. Pair distance histograms of ring center positions are utilized to develop quantitative metrics for structural comparison, and the physical origin of pair distance histogram peaks is addressed by direct assessment of real space structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In situ X-ray studies of adlayer-induced crystal nucleation at the liquid-liquid interface

Crystal nucleation and growth at a liquid–liquid interface is studied on the atomic scale by in situ Å-resolution X-ray scattering methods for the case of liquid Hg and an electrochemical dilute electrolyte containing Pb 2+ , F - , and Br - ions. In the regime negative of the Pb amalgamation potential Φ rp = -0.70 V, no change is observed from the surface-layered structure of pure Hg. Upon potential-induced release of Pb 2+ from the Hg bulk at Graphic, the formation of an intriguing interface structure is observed, comprising a well-defined 7.6-Å–thick adlayer, decorated with structurally related 3D crystallites. Both are identified by their diffraction peaks as PbFBr, preferentially aligned with their Graphic axis along the interface normal. X-ray reflectivity shows the adlayer to consist of a stack of five ionic layers, forming a single-unit-cell–thick crystalline PbFBr precursor film, which acts as a template for the subsequent quasiepitaxial 3D crystal growth. This growth behavior is assigned to the combined action of electrostatic and short-range chemical interactions.

Elsen, Annika↗

Enhancing solid-liquid interface thermal transport using self-assembled monolayers

The thermal conductance across solid-liquid interfaces is of interest for many applications. Using time-domain thermoreflectance, we measure here the thermal conductance across self-assembled monolayers, grown on Au, to ethanol. We systematically study the effect of different functional groups and the alkyl chain length on the thermal conductance. The results show that adding this extra molecular layer can enhance the thermal transport across the solid-liquid interface. While the enhancement is up to 5 times from hexanedithiol, the enhancement from hexanethiol, undecanethiol, and hexadecanethiol is approximately a factor of 2.

42 ENGINEERING↗

The Assembly and Jamming of Nanoparticle Surfactants at Liquid–Liquid Interfaces

Abstract Using the interactions between nanoparticles (NPs) and polymeric ligands to generate nanoparticle surfactants (NPSs) at the liquid–liquid interface, the binding energy of the NP to the interface can be significantly increased, irreversibly binding the NPSs to the interface. By designing a simplified NPS model, where the NP size can be precisely controlled and the characteristic fluorescence of the NPs be used as a direct probe of their spatial distribution, we provide new insights into the attachment mechanism of NPSs at the liquid–liquid interface. We find that the binding energy of NPSs to the interface can be reduced by competitive ligands, resulting in the dissociation and disassembly of NPSs at the interface, and allowing the construction of responsive, reconfigurable all‐liquid systems. Smaller NPSs that are loosely packed (unjammed) and irreversibly bound to the interface can be displaced by larger NPSs, giving rise to a size‐dependent assembly of NPSs at the interface. However, when the smaller size NPSs are densely packed and jam at the interface, the size‐dependent assembly of NPSs at the interface can be completely suppressed.

Wang, Beibei↗

The Assembly and Jamming of Nanoparticle Surfactants at Liquid–Liquid Interfaces

Abstract Using the interactions between nanoparticles (NPs) and polymeric ligands to generate nanoparticle surfactants (NPSs) at the liquid–liquid interface, the binding energy of the NP to the interface can be significantly increased, irreversibly binding the NPSs to the interface. By designing a simplified NPS model, where the NP size can be precisely controlled and the characteristic fluorescence of the NPs be used as a direct probe of their spatial distribution, we provide new insights into the attachment mechanism of NPSs at the liquid–liquid interface. We find that the binding energy of NPSs to the interface can be reduced by competitive ligands, resulting in the dissociation and disassembly of NPSs at the interface, and allowing the construction of responsive, reconfigurable all‐liquid systems. Smaller NPSs that are loosely packed (unjammed) and irreversibly bound to the interface can be displaced by larger NPSs, giving rise to a size‐dependent assembly of NPSs at the interface. However, when the smaller size NPSs are densely packed and jam at the interface, the size‐dependent assembly of NPSs at the interface can be completely suppressed.

Wang, Beibei↗

Ginzburg-Landau theory of the bcc-liquid interface kinetic coefficient

We extend the Ginzburg-Landau (GL) theory of atomically rough bcc-liquid interfaces outside of equilibrium. We use this extension to derive an analytical expression for the kinetic coefficient, which is the proportionality constant μ(nˆ) between the interface velocity along a direction nˆ normal to the interface and the interface undercooling. The kinetic coefficient is expressed as a spatial integral along the normal direction of a sum of gradient square terms corresponding to different nonlinear density wave profiles. Anisotropy arises naturally from the dependence of those profiles on the angles between the principal reciprocal lattice vectors K → i and nˆ. Values of the kinetic coefficient for the (100), (110), and (111) interfaces are compared quantitatively to the prediction of linear Mikheev-Chernov (MC) theory and previous molecular dynamics (MD) simulation studies of crystallization kinetics for a classical model of Fe. Additional MD simulations are carried out here to compute the relaxation time of density waves in the liquid in order to make this comparison free of fit parameters. The GL theory predicts an expression for μ similar to the MC theory but yields a better agreement with MD simulations for both its magnitude and anisotropy due to a fully nonlinear description of density wave profiles across the solid-liquid interface. In particular, the overall magnitude of μ predicted by GL theory is an order of magnitude larger than predicted by the MC theory. GL theory is also used to derive an inverse relation between μ and the solid-liquid interfacial free energy. Here, the general methodology used here to derive an expression for μ(nˆ) also applies to amplitude equations derived from the phase-field-crystal model, which only differ from GL theory by the choice of cubic and higher order nonlinearities in the free-energy density.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sculpting Liquids with Two-Dimensional Materials: The Assembly of Ti 3 C 2 T x MXene Sheets at Liquid–Liquid Interfaces

The self-assembly of nanoscale materials at the liquid-liquid interface allows for fabrication of three-dimensionally structured liquids with nearly arbitrary geometries and tailored electronic, optical, and magnetic properties. Two-dimensional (2D) materials are highly anisotropic, with thicknesses on the order of a nanometer and lateral dimensions upward of hundreds of nanometers to micrometers. Controlling the assembly of these materials has direct implications for their properties and performance. We here describe the interfacial assembly and jamming of Ti 3 C 2 T x MXene nanosheets at the oil-water interface. Planar, as well as complex, programmed three-dimensional all-liquid objects are realized. Finally, our approach presents potential for the creation of all-liquid 3D-printed devices for possible applications in all-liquid electrochemical and energy storage devices and electrically active, all-liquid fluidics that exploits the versatile structure, functionality, and reconfigurability of liquids.

2D materials↗

Predicting critical heat flux using localized sensing at invisible vapor-liquid interfaces

Predicting critical heat flux (CHF) in two-phase electronics cooling systems remains a significant challenge due to the sudden onset of boiling crisis and the difficulty in directly visualizing vapor-liquid interfaces. Existing sensing methods rely on lagging temperature measurements, optically accessible systems, or spatially averaged signals that cannot pinpoint CHF initiation at localized high-heat-flux regions. Here, we report a planar capacitive sensing approach that enables real-time, localized detection of vapor-liquid interface dynamics for CHF prediction in boiling heat transfer. The capacitive sensor exploits the dielectric constant difference between liquid and vapor phases to capture bubble nucleation, growth, and departure dynamics with a temporal resolution down to 2 ms. The capacitive sensing reveals distinct signals across boiling regimes: from high-frequency fluctuations during strong nucleate boiling to low-frequency fluctuations with increased amplitudes when approaching CHF. The multi-sensor array experiments demonstrate real-time localized sensing, where each sensor responds exclusively to boiling in its immediate vicinity without crosstalk from neighboring regions. This non-intrusive sensing approach provides predictive rather than lagging sensing signals of CHF occurrence, offering predictive diagnosis of two-phase liquid cooling for the thermal management of high-power-density electronics.

CHF↗

Structural ordering at solid-liquid interfaces in Al-Sm system: A molecular-dynamics study

The structural ordering at solid-liquid interfaces far from equilibrium is studied with molecular dynamics simulations for the Al-Sm system. Using the van-Hove self-correlation function as the criterion to identify attachment/detachment events that occur at the interface, we are able to determine the time-dependent interface position, and characterize the detailed interfacial structure ordering surrounding the attached atoms. For the interface between an undercooled Al90Sm10 liquid and a metastable cubic structure, the solid induces the crystalline order of the cubic phase in the liquid layers, promoting the continuous growth of the crystal phase. When the same liquid is put in contact with f.c.c. Al, Sm from the liquid can still attach to the solid interface despite its insolubility in the Al lattice. Non-f.c.c. order is revealed surrounding the attached Sm atoms. Lastly, we show that the local structure ordering at interface is highly correlated to solid packing and liquid ordering.

36 MATERIALS SCIENCE↗

Application of lipid-stabilized liquid-liquid interfaces in 3D printing of biomaterials

Developing strategies to stabilize liquid-liquid interfaces is essential for advancing applications in various biomedical systems. This study introduces a novel biocompatible in situ-forming material in which lipid self-assembly stabilizes water–oil interfaces, enabling controlled structuring of liquids through liquid-in-liquid 3D printing. The stabilization process, driven by the formation of nanostructures at the interface, is thoroughly analyzed through small-angle X-ray scattering (SAXS), rheometry, and microscopy techniques. This material system enables the fabrication of complex 3D constructs, including fibers, substrates, and microneedle patches, which exhibit outstanding mechanical properties and biocompatibility, as confirmed by tensile testing and cell viability tests. Here, by leveraging the unique properties of lipid-stabilized interfaces, this work demonstrates the potential of this approach for diverse biomedical applications such as drug delivery and tissue engineering while establishing a foundation for future advancements in liquid-in-liquid 3D printing technology.

36 MATERIALS SCIENCE↗

Three-dimensional atomic force microscopy mapping at the solid-liquid interface with fast and flexible data acquisition

We present the implementation of a three-dimensional mapping routine for probing solid-liquid interfaces using frequency modulation atomic force microscopy. Our implementation enables fast and flexible data acquisition of up to 20 channels simultaneously. The acquired data can be directly synchronized with commercial atomic force microscope controllers, making our routine easily extendable for related techniques that require additional data channels, e.g., Kelvin probe force microscopy. Moreover, the closest approach of the tip to the sample is limited by a user-defined threshold, providing the possibility to prevent potential damage to the tip. The performance of our setup is demonstrated by visualizing the hydration structure above the calcite (10.4) surface in water.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Gated Molecular Diffusion at Liquid–Liquid Interfaces

Abstract The jamming of nanoparticle surfactants (NPSs) at liquid–liquid interface imparts attractive properties to the interfacial assemblies and enables the structuring of liquids. Herein, we report photoresponsive supramolecular microcapsules with jammed NPS assemblies at the oil‐water interface, taking advantage of host–guest molecular recognition. The permeability of the colloidal membrane can be effectively manipulated by switching the NPSs from a jammed state to an unjammed state with a photo trigger, leading to a controlled molecular diffusion and release, affording a versatile platform for the construction of next generation smart microcapsule systems.

Li, Lianshun↗

Gated Molecular Diffusion at Liquid–Liquid Interfaces

The jamming of nanoparticle surfactants (NPSs) at liquid-liquid interface imparts attractive properties to the interfacial assemblies and enables the structuring of liquids. Herein, we report photoresponsive supramolecular microcapsules with jammed NPS assemblies at the oil-water interface, taking advantage of host-guest molecular recognition. The permeability of the colloidal membrane can be effectively manipulated by switching the NPSs from a jammed state to an unjammed state with a photo trigger, leading to a controlled molecular diffusion and release, affording a versatile platform for the construction of next generation smart microcapsule systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling of ultrasound transmission through a solid-liquid interface comprising a network of gas pockets

Ultrasonic inspection of sodium-cooled fast reactor requires a good acoustic coupling between the transducer and the liquid sodium. Ultrasonic transmission through a solid surface in contact with liquid sodium can be complex due to the presence of microscopic gas pockets entrapped by the surface roughness. Experiments are run using substrates with controlled roughness consisting of a network of holes and a modeling approach is then developed. In this model, a gas pocket stiffness at a partially solid-liquid interface is defined. This stiffness is then used to calculate the transmission coefficient of ultrasound at the entire interface. The gas pocket stiffness has a static, as well as an inertial component, which depends on the ultrasonic frequency and the radiative mass.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Engineering Biomolecular Self–Assembly at Solid–Liquid Interfaces

Biomolecular self–assembly is a key process used by life to build functional materials from the “bottom up.” In the last few decades, bioengineering and bionanotechnology have borrowed this strategy to design and synthesize numerous biomolecular and hybrid materials with diverse architectures and properties. However, engineering biomolecular self–assembly at solid–liquid interfaces into predesigned architectures lags the progress made in bulk solution both in practice and theory. Here, recent achievements in programming self–assembly of peptides, proteins, and peptoids at solid–liquid interfaces are summarized and corresponding applications are described. Recent advances in the physical understandings of self–assembly pathways obtained using in situ atomic force microscopy are also discussed. Furthermore, these advances will lead to novel strategies for designing biomaterials organized at and interfaced with inorganic surfaces.

36 MATERIALS SCIENCE↗

Multiscale modeling and laser diagnostics to reveal non-equilibrium reaction chemistry at a plasma-liquid interface

Low-temperature, atmospheric-pressure plasmas in contact with liquid are at the core of a wide range of applications including water treatment, medicine, materials synthesis, and chemical transformation. In general, plasma-liquid processes are scientifically compelling because reactivity can be produced without a catalyst, in relatively inert molecules, such as air or nitrogen and liquid water, in their native states at ambient conditions. However, reactions at a plasma-liquid interface are extremely complex, occurring at a multiphase, gas-liquid boundary where excited or dissociate gaseous species dissolve and react with solution-phase species, and unique reaction pathways are induced by non-equilibrium chemistry. In particular, detailed knowledge of the physical and chemical processes, including what species are produced in the gas phase and how these species are subsequently transported across and react near the interfacial region, remains largely unanswered. In this project, modeling of the non-equilibrium reaction chemistry at the interface of low-temperature, atmospheric-pressure plasmas and liquid water is developed, supported by advanced laser diagnostics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ag + reduction and silver nanoparticle synthesis at the plasma–liquid interface by an RF driven atmospheric pressure plasma jet: Mechanisms and the effect of surfactant

Here, the involvement of plasma produced species in the reduction of silver ions at the plasma–liquid interface is investigated using a well-characterized radio-frequency driven atmospheric pressure plasma jet. The absolute gas phase H density was measured using two photon absorption laser induced fluorescence in the free jet. Broadband absorption and transmission electron microscopy were used to study the synthesis of silver nanoparticles (AgNPs). It is shown that fructose, an often used surfactant/stabilizer for AgNP synthesis, also acts as a reducing agent after plasma exposure. Nonetheless, surfactant free AgNP synthesis is observed. Several experimental findings indicate that H plays an important role in the reduction of silver ions for the plasma conditions in this study. Vacuum ultraviolet photons generated by the plasma are able to reduce silver ions in the presence of fructose. Adding H2 to the argon feed gas leads to the production of a large amount of AgNPs having a particle size distribution with a maximum at a diameter of 2–3 nm, which is not observed for argon plasmas. This finding is consistent with a smaller concentration of reducing species at the plasma–liquid interface for Ar with the H2 admixture plasma. The smaller flux of reactive species to the liquid is in this case due to a less strong interaction of the plasma with the liquid. The formation of the nanoparticles was observed even at a distance of 6–7 mm below the tip of the plasma plume, conditions not favoring the injection of electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗