Search NASA⌕ Search

SEARCH · Search NASA

Results for “liquids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Measurements of electron transport in liquid and gas Xenon using a laser-driven photocathode

Measurements of electron drift properties in liquid and gaseous xenon are reported. The electrons are generated by the photoelectric effect in a semitransparent gold photocathode driven in transmission mode with a pulsed ultraviolet laser. The charges drift and diffuse in a small chamber at various electric fields and a fixed drift distance of 2.0 cm. At an electric field of 0.5 kV/cm, the measured drift velocities and corresponding temperature coefficients respectively are 1.97 ± 0.04 mm/µs and (-0.69 ± 0.05)%/K for liquid xenon, and 1.42 ± 0.03 mm/µs and (+0.11 ± 0.01)%/K for gaseous xenon at 1.5 bar. In addition, we measure longitudinal diffusion coefficients of 25.7±4.6 cm2/s and 149±23 cm2/s, for liquid and gas, respectively. The quantum efficiency of the gold photocathode is studied at the photon energy of 4.73 eV in liquid and gaseous xenon, and vacuum. These charge transport properties and the behavior of photocathodes in a xenon environment are important in designing and calibrating future large scale noble liquid detectors.

Njoya, Oumarou↗
NASA NTRS2004

Microgravity Studies of Liquid-Liquid Phase Transitions in Alumina-Yttria Melts

The scientific objective of this research is to increase the fundamental knowledge base for liquid- phase processing of technologically important oxide materials. The experimental objective is to define conditions and hardware requirements for microgravity flight experiments to test and expand the experimental hypotheses that: 1. Liquid phase transitions can occur in undercooled melts by a diffusionless process. 2. Onset of the liquid phase transition is accompanied by a large change in the temperature dependence of melt viscosity. Experiments on undercooled YAG (Y3A15012)- and rare earth oxide aluminate composition liquids demonstrated a large departure from an Arrhenian temperature dependence of viscosity. Liquid YAG is nearly inviscid at its 2240 K melting point. Glass fibers were pulled from melts undercooled by ca. 600 K indicating that the viscosity is on the order of 100 Pans (1000 Poise) at 1600 K. This value of viscosity is 500 times greater than that obtained by extrapolation of data for temperatures above the melting point of YAG. These results show that the liquids are extremely fragile and that the onset of the highly non-Arrhenian viscosity-temperature relationship occurs at a temperature considerably below the equilibrium melting point of the solid phases. Further results on undercooled alumina-yttria melts containing 23-42 mole % yttrium oxide indicate that a congruent liquid-liquid phase transition occurs in the undercooled liquids. The rates of transition are inconsistent with a diffusion-limited process. This research is directed to investigation of the scientifically interesting phenomena of polyamorphism and fragility in undercooled rare earth oxide aluminum oxide liquids. The results bear on the technologically important problem of producing high value rare earth-based optical materials.

Guynes, Buddy↗
DOE OSTI2024

A Versatile Approach to Stabilize Liquid–Liquid Interfaces using Surfactant Self-Assembly

Stabilizing liquid–liquid interfaces, whether between miscible or immiscible liquids, is crucial for a wide range of applications, including energy storage, microreactors, and biomimetic structures. Here, in this study, a versatile approach for stabilizing the water-oil interface is presented using the morphological transitions that occur during the self-assembly of anionic, cationic, and nonionic surfactants mixed with fatty acid oils. The morphological transitions underlying this approach are characterized and extensively studied through small-angle X-ray scattering (SAXS), rheometry, and microscopy techniques. Dissipative particle dynamics (DPD) as a simulation tool is adopted to investigate these morphological transitions both in the equilibrium ternary system as well as in the dynamic condition of the water-oil interface. Such a versatile strategy holds promise for enhancing applications such as liquid-in-liquid 3D printing. Moreover, it has the potential to revolutionize a wide range of fields where stabilizing liquid–liquid interfaces not only offers unprecedented opportunities for fine-tuning nanostructural morphologies but also imparts interesting practical features to the resulting liquid shapes. These features include perfusion capabilities, self-healing, and porosity, which could have significant implications for various industries.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A versatile approach to stabilize liquid-liquid interfaces using surfactant self-assembly

Stabilizing liquid–liquid interfaces, whether between miscible or immiscible liquids, is crucial for a wide range of applications, including energy storage, microreactors, and biomimetic structures. In this study, a versatile approach for stabilizing the water-oil interface is presented using the morphological transitions that occur during the self-assembly of anionic, cationic, and nonionic surfactants mixed with fatty acid oils. The morphological transitions underlying this approach are characterized and extensively studied through small-angle X-ray scattering (SAXS), rheometry, and microscopy techniques. Dissipative particle dynamics (DPD) as a simulation tool is adopted to investigate these morphological transitions both in the equilibrium ternary system as well as in the dynamic condition of the water-oil interface. Such a versatile strategy holds promise for enhancing applications such as liquid-in-liquid 3D printing. Moreover, it has the potential to revolutionize a wide range of fields where stabilizing liquid–liquid interfaces not only offers unprecedented opportunities for fine-tuning nanostructural morphologies but also imparts interesting practical features to the resulting liquid shapes. These features include perfusion capabilities, self-healing, and porosity, which could have significant implications for various industries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Melting curves of ice polymorphs in the vicinity of the liquid–liquid critical point

The possible existence of a liquid–liquid critical point in deeply supercooled water has been a subject of debate due to the challenges associated with providing definitive experimental evidence. The pioneering work by Mishima and Stanley [Nature 392, 164–168 (1998)] sought to shed light on this problem by studying the melting curves of different ice polymorphs and their metastable continuation in the vicinity of the expected liquid–liquid transition and its associated critical point. Based on the continuous or discontinuous changes in the slope of the melting curves, Mishima [Phys. Rev. Lett. 85, 334 (2000)] suggested that the liquid–liquid critical point lies between the melting curves of ice III and ice V. Herein we explore this conjecture using molecular dynamics simulations with a machine learning model based on ab initio quantum-mechanical calculations. We study the melting curves of ices III, IV, V, VI, and XIII and find that all of them are supercritical and do not intersect the liquid–liquid transition locus. We also find a pronounced, yet continuous, change in the slope of the melting lines upon crossing of the liquid locus of maximum compressibility. Finally, we analyze the literature in light of our findings and conclude that the scenario in which the melting curves are supercritical is favored by the most recent computational and experimental evidence. Although the preponderance of evidence is consistent with the existence of a second critical point in water, the behavior of ice polymorph melting lines does not provide strong evidence in support of this viewpoint, according to our calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1974

Experimental liquid line of descent and liquid immiscibility for basalt 70017

The paper describes one possible liquid line of descent produced for a high-titanium mare basalt composition through an arbitrarily chosen series of partial equilibrium and fractional crystallization experiments on basalt 70017. The liquid line of descent leading to immiscibility at 994 C is characterized by enrichment of FeO, K2O, SiO2, and MnO and depletion of MgO and TiO2 in the residual liquids. The composition of the residual liquid at the onset of immiscibility is ferrobasaltic, and the initial appearance of immiscible liquids in the form of silica-rich spherules is in the vicinity of plagioclase-liquid contacts. The integrated bulk composition of the areas of finely exsolved liquids indicates that the trend of the liquid line of descent is at a small angle to the tie lines joining the two liquids.

Rutherford, M. J.↗
DOE OSTI2021

Broadband Liquid Crystal Tunable Metasurfaces in the Visible: Liquid Crystal Inhomogeneities Across the Metasurface Parameter Space

Optical metasurfaces—planar nanostructured devices that can arbitrarily tailor the wavefront of light—may be reconfigured by changing their dielectric environment. The application of external stimuli to liquid crystals is a particularly promising means of tuning the optical properties of embedded metasurfaces because of liquid crystals' large and broadband optical anisotropy. However, the detailed behavior of liquid crystals immediately adjacent to the nanostructured meta-atoms elements is often overlooked, despite the optics of the device depending sensitively on this behavior (e.g., the spectral position of the meta-atom resonances). This is of increasing concern as the wavelength of operation further approaches the short-wavelength end of the visible spectrum and, therefore, the length scale of the inhomogeneities in the liquid crystal director field. In this manuscript, we undertake a fully comprehensive study, across the metasurface geometrical parameter space, of broadband (450-700 nm) all-dielectric liquid crystal tunable metasurfaces operating in the visible. Here, through combined experimental characterization, liquid crystal modeling, and optical simulations, we reveal and quantify the improved accuracy with which the optical properties of the liquid crystal tunable metasurfaces may be described, and identify the underlying physical mechanism: the three-dimensional spatial overlap of the liquid crystal director field and metasurface optical near fields in the vicinity of the meta-atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

HIDRA-MAT liquid metal droplet injector for liquid metal applications in HIDRA

A liquid metal droplet injector was explicitly designed for the Hybrid Illinois Device for Research and Applications Material Analysis Test-stand (HIDRA-MAT) at the University of Illinois Urbana-Champaign to prepare liquid metal plasma-facing components (PFCs) for plasma exposure. The design goals were to create a compact, reliable, and robust design that could apply liquid metal droplets in-vacuo to a variety of samples. The injector was designed for liquid metal use, and results discussed pertain to lithium. The injector can produce lithium droplets of consistent size by utilizing programmable piston movement. Here, droplet formation data is presented for four different piston step sizes (0.125 mm, 0.25 mm, 0.5 mm, and 1 mm) at three different nozzle temperatures (185 °C, 230 °C, and 270 °C). Droplets are formed on the injector nozzle tip and a linear shift mechanism vertically translates the droplet to the substrate for application. This design prevents the droplet from inadvertently detaching off the nozzle and falling to the sample. Application of the liquid metal droplet ensures placement consistency on the substrate and helps avoid damage to components in HIDRA-MAT that should not interact with liquid metals. A description of the liquid lithium droplet creation and application results is given and provides additional insight into the cooling and oxidation of lithium droplets under vacuum conditions. A second nozzle was fabricated and demonstrated repeatability in droplet diameter creation having a variance of ±0.14 mm for droplets created from the same number of piston steps. The end-use for the injector on HIDRA-MAT is to apply liquid metals to PFCs and expose them to HIDRA's plasma with subsequent intershot in-vacuo surface analysis in HIDRA-MAT for plasma-material interaction studies.

42 ENGINEERING↗
DOE OSTI2020

An Open-Cell Environmental Transmission Electron Microscopy Technique for In Situ Characterization of Samples in Aqueous Liquid Solutions

The desire to image specimens in liquids has led to the development of open-cell and closed-cell techniques in transmission electron microscopy (TEM). The closed-cell approach is currently more common in TEM and has yielded new insights into a number of biological and materials processes in liquid environments. The open-cell approach, which requires an environmental TEM (ETEM), is technically challenging but may be advantageous in certain circumstances due to fewer restrictions on specimen and detector geometry. Here, we demonstrate a novel approach to open-cell liquid TEM, in which we use salt particles to facilitate the in situ formation of droplets of aqueous solution that envelope specimen particles coloaded with the salt. This is achieved by controlling sample temperature between 1 and 10°C and introducing water vapor to the ETEM chamber above the critical pressure for the formation of liquid water on the salt particles. Our use of in situ hydration enables specimens to be loaded into a microscope in a dry state using standard 3 mm TEM grids, allowing specimens to be prepared using trivial sample preparation techniques. Furthermore, our future aim will be to combine this technique with an in situ light source to study photocorrosion in aqueous environments.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Identification of a quasi-liquid phase at solid–liquid interface

Abstract An understanding of solid–liquid interfaces is of great importance for fundamental research as well as industrial applications. However, it has been very challenging to directly image solid–liquid interfaces with high resolution, thus their structure and properties are often unknown. Here, we report a quasi-liquid phase between metal (In, Sn) nanoparticle surfaces and an aqueous solution observed using liquid cell transmission electron microscopy. Our real-time high-resolution imaging reveals a thin layer of liquid-like materials at the interfaces with the frequent appearance of small In nanoclusters. Such a quasi-liquid phase serves as an intermediate for the mass transport from the metal nanoparticle to the liquid. Density functional theory-molecular dynamics simulations demonstrate that the positive charges of In ions greatly contribute to the stabilization of the quasi-liquid phase on the metal surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2011

Fractional Consumption of Liquid Hydrogen and Liquid Oxygen During the Space Shuttle Program

The Space Shuttle uses the propellants, liquid hydrogen and liquid oxygen, to meet part of the propulsion requirements from ground to orbit. The Kennedy Space Center procured over 25 million kilograms of liquid hydrogen and over 250 million kilograms of liquid oxygen during the 3D-year Space Shuttle Program. Because of the cryogenic nature of the propellants, approximately 55% of the total purchased liquid hydrogen and 30% of the total purchased liquid oxygen were used in the Space Shuttle Main Engines. The balance of the propellants were vaporized during operations for various purposes. This paper dissects the total consumption of liqUid hydrogen and liqUid oxygen and determines the fraction attributable to each of the various processing and launch operations that occurred during the entire Space Shuttle Program at the Kennedy Space Center.

Partridge, Jonathan K.↗
DOE OSTI2020

Signatures of a liquid–liquid transition in an ab initio deep neural network model for water

Significance Water is central across much of the physical and biological sciences and exhibits physical properties that are qualitatively distinct from those of most other liquids. Understanding the microscopic basis of water’s peculiar properties remains an active area of research. One intriguing hypothesis is that liquid water can separate into metastable high- and low-density liquid phases at low temperatures and high pressures, and the existence of this liquid–liquid transition could explain many of water’s anomalous properties. We used state-of-the-art approaches in computational quantum chemistry, statistical mechanics, and machine learning and obtained evidence consistent with a liquid–liquid transition, supporting the argument for the existence of this phenomenon in real water.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Role of generic scale invariance in a Mott transition from a U(1) spin-liquid insulator to a Landau Fermi-liquid metal

Highlights: • We look at the role played by generic scale invariance (GSI) in the phase transition between a U(1) spin liquid and a Fermi liquid. • We identify dangerously irrelevant operators in the renormalization group transformation, involved with the GSI. • We highlight novel mean-field dynamics of this Mott quantum criticality, resulting from the GSI. We investigate the role of generic scale invariance in a Mott transition from a U(1) spin-liquid insulator to a Landau Fermi-liquid metal, where there exist massless degrees of freedom in addition to quantum critical fluctuations. Here, the Mott quantum criticality is described by critical charge fluctuations, and additional gapless excitations are U(1) gauge-field fluctuations coupled to a spinon Fermi surface in the spin-liquid state, which turn out to play a central role in the Mott transition. An interesting feature of this problem is that the scaling dimension of effective leading local interactions between critical charge fluctuations differs from that of the coupling constant between U(1) gauge fields and matter-field fluctuations in the presence of a Fermi surface. As a result, there appear dangerously irrelevant operators, which can cause conceptual difficulty in the implementation of renormalization group (RG) transformations. Indeed, we find that the curvature term along the angular direction of the spinon Fermi surface is dangerously irrelevant at this spin-liquid Mott quantum criticality, responsible for divergence of the self-energy correction term in U(1) gauge-field fluctuations. Performing the RG analysis in the one-loop level based on the dimensional regularization method, we reveal that such extremely overdamped dynamics of U(1) gauge-field fluctuations, which originates from the emergent one-dimensional dynamics of spinons, does not cause any renormalization effects to the effective dynamics of both critical charge fluctuations and spinon excitations. However, it turns out that the coupling between U(1) gauge-field fluctuations and both matter-field excitations still persists at this Mott transition, which results in novel mean-field dynamics to explain the nature of the spin-liquid Mott quantum criticality. We discuss physical implications of effective one-dimensional spin dynamics and extremely overdamped gauge dynamics at the Mott quantum criticality.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Density of Fe-Ni-C Liquids at High Pressures and Implications for Liquid Cores of Earth and the Moon

The presence of light elements in the metallic cores of the Earth, the Moon, and other rocky planetary bodies has been widely proposed. Carbon is among the top candidates in light of its high cosmic abundance, siderophile nature, and ubiquity in iron meteorites. It is, however, still controversial whether carbon-rich core compositional models can account for the seismic velocity observations within the Earth and lunar cores. In this paper we report the density and elasticity of Fe 90 Ni 10 -3 wt.% C and Fe 90 Ni 10 -5 wt.% C liquid alloys using synchrotron-based X-ray absorption experiments and first-principles molecular dynamics simulations. Our results show that alloying of 3 wt.% and 5 wt.% C lowers the density of Fe 90 Ni 10 liquid by ~2.9-3.1% at 2 GPa, and ~3.4-3.6% at 9 GPa. More intriguingly, our experiments and simulations both demonstrate that the bulk moduli of the Fe-Ni-C liquids are similar to or slightly higher than those of Fe-Ni liquids. Thus, the calculated compressional velocity ($v_p$) of Fe-Ni-C liquids are higher than that of pure Fe-Ni alloy, promoting carbon as a possible candidate to explain the elevated v p in the Earth's outer core. However, the values and slopes of both density and v p of the studied two Fe-Ni-C liquids do not match the outer core seismic models, suggesting that carbon may not be the sole principal light element in Earth's outer core. The high $v_p$ of Fe-Ni-C liquids does not match the presumptive $v_p$ of the lunar outer core well, indicating that carbon is less likely to be its dominant light element.

58 GEOSCIENCES↗
NASA NTRS1962

Investigation of the Damping of Liquids in Right-Circular Cylindrical Tanks, Including the Effects of a Time-Variant Liquid Depth

An experimental investigation was conducted to determine the effects of several basic variables upon the damping of the fundamental antisymmetric mode of liquids in right-circular cylindrical tanks without baffles. The variables examined include liquid depth, efflux rate, liquid amplitude, kinematic viscosity, and tank size. The data are presented in dimensionless form and compared with available theory. For the range of variables examined, variations of efflux rate and liquid amplitude were found to have no significant effects on the liquid damping. The following theoretical relationship was found to be adequate for the prediction of the variation of damping with liquid depth, kinematic viscosity, and tank size: [for equation see full text] where v is the kinematic viscosity, R is the cylinder radius, g is the acceleration due to gravity, and h is the liquid depth. However, the constant K was experimentally found in this investigation to have the value 5.23, which is 50 percent higher than the theoretically predicted value.

TANK↗
NASA NTRS2024

General Circulation Models Simulate Negative Liquid Water Path­–Droplet Number Correlations, but Anthropogenic Aerosols Still Increase Simulated Liquid Water Path

General circulation models' (GCMs) estimates of the liquid water path adjustment to anthropogenic aerosol emissions differ in sign from other lines of evidence. This reduces confidence in estimates of the effective radiative forcing of the climate by aerosol–cloud interactions (ERFaci). The discrepancy is thought to stem in part from GCMs' inability to represent the turbulence–microphysics interactions in cloud-top entrainment, a mechanism that leads to a reduction in liquid water in response to an anthropogenic increase in aerosols. In the real atmosphere, enhanced cloud-top entrainment is thought to be the dominant adjustment mechanism for liquid water path, weakening the overall ERFaci. We show that the latest generation of GCMs includes models that produce a negative correlation between the present-day cloud droplet number and liquid water path, a key piece of observational evidence supporting liquid water path reduction by anthropogenic aerosols and one that earlier-generation GCMs could not reproduce. However, even in GCMs with this negative correlation, the increase in anthropogenic aerosols from preindustrial to present-day values still leads to an increase in the simulated liquid water path due to the parameterized precipitation suppression mechanism. This adds to the evidence that correlations in the present-day climate are not necessarily causal. We investigate sources of confounding to explain the noncausal correlation between liquid water path and droplet number. These results are a reminder that assessments of climate parameters based on multiple lines of evidence must carefully consider the complementary strengths of different lines when the lines disagree.

General circulation models↗
DOE OSTI2020

Small- and Wide-Angle X-ray Scattering Studies of Liquid–Liquid Phase Separation in Silicate Melts

Incongruent liquid-liquid phase separation is a common phenomenon in molten oxides, but there are few structural studies due to the high temperatures involved ca. >1600oC. In this work, we present a high-energy x-ray combined small/wide angle scattering (SAXS/WAXS) method that can directly probe non-equilibrium phase diagrams. The Porod exponent in the SAXS signal is extracted, which measures the roughness of the interface formed between different phases. Problematic volatilization of silica in Al 2 O 3 -, CaO-, and MgO-bearing silica-rich liquids were minimized using levitation, laser heating and rapid time-resolved measurements (lasting tens of seconds), to probe the kinetics of the phase separation process. The WAXS measurement simultaneously probes the local atomic structure of the liquid state and shows that the primary structural changes are associated with the SiO 2 network. Cation coordination numbers extracted from pair distribution functions support the model that the origin of phase separation in binary silicate systems is due to Coulombic repulsions between poorly screened cations. For CaO-SiO 2 , the liquid-liquid phase separation is found to correlate with a pause in the temperature dependent atomic disorder associated with SiO4 tetrahedra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Application of lipid-stabilized liquid-liquid interfaces in 3D printing of biomaterials

Developing strategies to stabilize liquid-liquid interfaces is essential for advancing applications in various biomedical systems. This study introduces a novel biocompatible in situ-forming material in which lipid self-assembly stabilizes water–oil interfaces, enabling controlled structuring of liquids through liquid-in-liquid 3D printing. The stabilization process, driven by the formation of nanostructures at the interface, is thoroughly analyzed through small-angle X-ray scattering (SAXS), rheometry, and microscopy techniques. This material system enables the fabrication of complex 3D constructs, including fibers, substrates, and microneedle patches, which exhibit outstanding mechanical properties and biocompatibility, as confirmed by tensile testing and cell viability tests. Here, by leveraging the unique properties of lipid-stabilized interfaces, this work demonstrates the potential of this approach for diverse biomedical applications such as drug delivery and tissue engineering while establishing a foundation for future advancements in liquid-in-liquid 3D printing technology.

36 MATERIALS SCIENCE↗