Search NASA⌕ Search

SEARCH · Search NASA

Results for “localized tuning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Distributed Conditions for Small-signal Stability of Power Grids and Local Control Design

Operating modern power grids with stability guarantees is markedly important. Typical methods for analyzing and certifying power grid stability are largely centralized relying on the ability of the system operator to gather network-wide information and accurately compute the system's eigenvalues. These methods are oftentimes not privacy-preserving and computationally burdensome. They are therefore, not well-suited to modern power grids where small-signal stability has to be evaluated timely, efficiently and in a privacy-preserving fashion. Herein, we introduce a distributed methodology for certifying small-signal stability of power grids and designing the local controllers. First, we analytically derive distributed conditions for network-wide stability that bus agents can inspect using local information. By leveraging these conditions, we then introduce a distributed control design algorithm (DCDA) that can guide the local control design so that stability of the interconnected system is guaranteed. The agents that adopt the proposed distributed algorithm are responsible for tuning their local controllers, producing their local control commands and ensuring that their local stability condition is met. The system operator is only responsible for verifying network-wide stability upon receiving affirmative responses from all agents and, announcing, that the overall system is stable. The proposed DCDA algorithm is numerically validated via simulations using the IEEE 39-bus system.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Optimally tuned starting point for single-shot GW calculations of solids

The dependence of ab initio many-body perturbation theory within the $\textit{GW}$ approximation on the eigensystem used in calculating quasiparticle corrections limits this method's predictive power. Here, we investigate the accuracy of the recently developed Wannier-localized optimally tuned screened range-separated hybrid (WOT-SRSH) functional as a generalized Kohn-Sham starting point for single-shot $\textit{GW}$ ($G_0W_0$) calculations for a range of semiconductors and insulators. Comparison to calculations based on well-established functionals, namely, PBE, PBE0, and HSE, as well as to self-consistent GW schemes and to experiment, shows that band gaps computed via $G_0W_0$@WOT-SRSH have a level of precision and accuracy that is comparable to that of more advanced methods such as quasiparticle self-consistent $\textit{GW}$ and eigenvalue self-consistent $\textit{GW}$. In this work, we also find that $G_0W_0$@WOT-SRSH improves the description of states deeper in the valence band manifold. Finally, we show that $G_0W_0$@WOT-SRSH significantly reduces the sensitivity of computed band gaps to ambiguities in the underlying WOT-SRSH tuning procedure.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tailoring Local Chemical Ordering via Elemental Tuning in High-Entropy Alloys

Due to the large multi-elemental space desired for property screening and optimization, high-entropy alloys (HEAs) hold greater potential over conventional alloys for a range of applications, such as structural materials, energy conversion, and catalysis. However, the relationship between the HEA composition and its local structural/elemental configuration is not well understood, particularly in noble-metal-based HEA nanomaterials, hindering the design and development of nano-HEAs in energy conversion and catalysis applications. In this work, we determined precise atomic-level structural and elemental arrangements in model HEAs composed of RhPtPdFeCo and RuPtPdFeCo to unveil their local characteristics. Notably, by changing just one constituent element in the HEA (Rh to Ru), we found dramatic changes in the elemental arrangement from complete random mixing to a local single elemental ordering feature. Additionally, we demonstrate that the local ordering in RuPtPdFeCo can be further controlled by varying the Ru concentration, allowing us to toggle between local Ru clustering and distinct heterostructures in multicomponent systems. Overall, our study presents a practical approach for manipulating local atomic structures and elemental arrangements in noble-metal-based HEA systems, which could provide in-depth knowledge to mechanistically understand the functionality of noble-metal-based HEA nanomaterials in practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effects of local compositional and structural disorder on vacancy formation in entropy-stabilized oxides from first-principles

Entropic stabilization has evolved into a strategy to create new oxide materials and realize novel functional properties engineered through the alloy composition. Achieving an atomistic understanding of these properties to enable their design, however, has been challenging due to the local compositional and structural disorder that underlies their fundamental structure-property relationships. Here, we combine high-throughput atomistic calculations and linear regression algorithms to investigate the role of local configurational and structural disorder on the thermodynamics of vacancy formation in (MgCoNiCuZn)O-based entropy-stabilized oxides (ESOs) and their influence on the electrical properties. We find that the cation-vacancy formation energies decrease with increasing local tensile strain caused by the deviation of the bond lengths in ESOs from the equilibrium bond length in the binary oxides. The oxygen-vacancy formation strongly depends on structural distortions associated with the local configuration of chemical species. Vacancies in ESOs exhibit deep thermodynamic transition levels that inhibit electrical conduction. By applying the charge-neutrality condition, we determine that the equilibrium concentrations of both oxygen and cation vacancies increase with increasing Cu mole fraction. Our results demonstrate that tuning the local chemistry and associated structural distortions by varying alloy composition acts an engineering principle that enables controlled defect formation in multi-component alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Large-Area Lasing in Nanoscale Complex Media: The Critical Role of Local Dielectric Environment

Controlling how electromagnetic waves interact with complex media is critical for applications in imaging and focusing. Such lightwave interactions with complex media can lead to dramatic optical effects like lasing. While much work in random lasing focus on understanding how gain and scattering co-operatively generate lasing, little work has focused on how to manipulate the lasing threshold without modifying the structural disorder. Here, a simple, mostly unexplored, strategy is demonstrated that employs atomic layer deposition (ALD) to tune the local near-field environment while preserving the underpinning disorder—controlling lasing in a nanoscale complex medium on a large scale (>cm 2 ). The nanoscale complex medium is a quasi-2D system of coupled zinc oxide nanospheres with overall thickness deep in the sub-wavelength regime (≈λ/4). Near-ultraviolet femtosecond spectroscopy probes the broadband response of the gain nanomaterial, details how ALD process fundamentally modifies the fast-picosecond and slow-nanosecond carrier dynamics, and informs on the relevant timescales critical for lasing. Full-field electromagnetic simulations provide critical insights about how near-field dielectric environment modifies the nanostructure's scattering cross-section, which ultimately results in enhanced lasing. Importantly, these results highlight a simple path to control how electromagnetic waves interact in a complex medium, a key step toward large-scale implementation of complex lasers.

36 MATERIALS SCIENCE↗
DOE OSTI2021

An in situ ambient and cryogenic transmission electron microscopy study of the effects of temperature on dislocation behavior in CrCoNi-based high-entropy alloys with low stacking-fault energy

Temperature is known to affect deformation mechanisms in metallic alloys. As temperature decreases, the stacking-fault energy in many face-centered cubic (fcc) alloys decreases, resulting in a change of deformation mode from dislocation slip to deformation twinning. Such an impact of temperature can be more complex in compositionally heterogeneous microstructures that exhibit, for example, local concentration fluctuation such as that in multi-principal element alloys. In this work, we compare the dislocation behavior and mechanical properties of a fcc Cr 20 Mn 10 Fe 30 Co 30 Ni 10 high-entropy alloy at ambient and liquid-nitrogen temperatures. We find that a network of stacking faults is formed by uniformly extended dislocations at ambient temperatures with low stacking-fault energy, whereas at lower temperatures, uneven dissociation of dislocations becomes significant, which results in severe dislocation pile-ups together with their pronounced entanglement. Our findings indicate that as the stacking-fault energy decreases with decreasing temperature, the heterogeneity of the distribution of elements becomes more dominant in tuning the local variation of lattice resistance. As a result, the change in dislocation behavior at low temperatures strongly affects microstructural evolution and consequently leads to significantly more pronounced work hardening.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Hierarchically Porous Carbons with Highly Curved Surfaces for Hosting Single Metal FeN 4 Sites as Outstanding Oxygen Reduction Catalysts

Iron–nitrogen–carbon (Fe₋N₋C) materials have emerged as a promising alternative to platinum-group metals for catalyzing the oxygen reduction reaction (ORR) in proton-exchange-membrane fuel cells. However, their low intrinsic activity and stability are major impediments. Herein, an Fe₋N–C electrocatalyst with dense FeN 4 sites on hierarchically porous carbons with highly curved surfaces (denoted as FeN 4 - hc C) is reported. The FeN 4 - hc C catalyst displays exceptional ORR activity in acidic media, with a high half-wave potential of 0.85 V (versus reversible hydrogen electrode) in 0.5 m H 2 SO 4 . When integrated into a membrane electrode assembly, the corresponding cathode displays a high maximum peak power density of 0.592 W cm -2 and demonstrates operating durability over 30 000 cycles under harsh H 2 /air conditions, outperforming previously reported Fe–N₋C electrocatalysts. These experimental and theoretical studies suggest that the curved carbon support fine-tunes the local coordination environment, lowers the energies of the Fe d-band centers, and inhibits the adsorption of oxygenated species, which can enhance the ORR activity and stability. This work provides new insight into the carbon nanostructure–activity correlation for ORR catalysis. It also offers a new approach to designing advanced single-metal-site catalysts for energy-conversion applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Photocatalytic Hydrogen Evolution by a De Novo Designed Metalloprotein that Undergoes Ni–Mediated Oligomerization Shift

De novo metalloprotein design involves the construction of proteins guided by specific repeat patterns of polar and apolar residues, which, upon self-assembly, provide a suitable environment to bind metals and produce artificial metalloenzymes. While a wide range of functionalities have been realized in de novo designed metalloproteins, the functional repertoire of such constructs towards alternative energy-relevant catalysis is currently limited. Here we show the application of de novo approach to design a functional H 2 evolving protein. The design involved the assembly of an amphiphilic peptide featuring cysteines at tandem a/d sites of each helix. Intriguingly, upon Ni II addition, the oligomers shift from a major trimeric assembly to a mix of dimers and trimers. The metalloprotein produced H 2 photocatalytically with a bell-shape pH dependence, having a maximum activity at pH 5.5. Transient absorption spectroscopy is used to determine the timescales of electron transfer as a function of pH. Selective outer sphere mutations are made to probe how the local environment tunes activity. Finally, a preferential enhancement of activity is observed via steric modulation above the Ni II site, towards the N-termini, compared to below the Ni II site towards the C-termini.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

How to Decarbonize Our Energy Systems: Process‐Informed Design of New Materials for Carbon Capture

Decarbonisation from a variety of industrial and power emission sectors highlights a marked need for capture technologies that can be optimized for different CO 2 sources and integrated into an equally diverse range of applications of captured CO 2 as a feedstock. Some capture technologies are already operated at an industrial scale but may not be optimal for all required applications. Advanced tailored sorbent-based technologies allow flexible operation and reduced costs as they offer higher capture capacities and significantly lower energy penalties than the state-of-the-art systems. To accelerate the discovery, development, and deployment of novel advanced materials, it is critically important that efforts between experimentalists, theoreticians, and process engineers are coordinated. The PrISMa project addresses this challenge by integrating materials design with process design and environmental considerations to allow for tailor-making carbon capture solutions optimally tuned for local sources and sinks. In this article, we highlight some of the recent results obtained with the PrISMa platform.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Defect-Enabled Phase Programming of Transition Metal Dichalcogenide Monolayers

The ability to tune the local electronic transport properties of group VI transition metal dichalcogenide (TMD) monolayers by strain-induced structural phase transformations (“phase programming”) has stimulated much interest in the potential applications of such layers as ultrathin programmable and dynamically switchable nanoelectronics components. In this manuscript, we propose a new approach toward controlling TMD monolayer phases by employing macroscopic in-plane strains to amplify heterogeneous strains arising from tailored, spatially extended defects within the monolayer. Furthermore, the efficacy of our proposed approach is demonstrated via numerical simulations of emerging domains localized around arrays of holes, grain boundaries, and compositional heterointerfaces. Quantitative relations between the macroscopic strains required, spatial resolution of domain patterns, and defect configurations are developed. In particular, the introduction of arrays of holes is identified as the most feasible phase programming route.

2D materials↗
DOE OSTI2025

Resistive Switching of Spinel Li 4 Ti 5 O 12 Lithium-Ion Battery Material for Neuromorphic Computing

The rapid rise of AI has exposed significant limitations in conventional Von Neumann computing architecture, particularly in regard to speed and energy efficiency. To address these challenges, researchers are exploring a brain-inspired neuromorphic architecture that mimics biological neural networks, enabling massive parallel processing with reduced power consumption for complex AI computational demands. Recent interest has focused on utilizing battery electrodes and solid electrolyte materials for their resistive switching properties in developing a neuromorphic architecture. These properties are precisely tuned through local- and bulk-level chemical composition modifications via voltage bias stimuli. In this study, we demonstrate fabricating a three-terminal lithium-ion electrochemical transistor based on lithium titanium oxide (Li 4 Ti 5 O 12 ), a popular lithium-ion battery anode material. We deposited and characterized LTO thin films using RF sputtering, demonstrating a 6 orders of magnitude increase in electronic conductivity upon lithiation, with conductivity plateauing after 20% lithiation. Density functional theory calculations revealed transformation from the insulating to conducting state, supported by experimental characterization through X-Ray Photoelectron Spectroscopy (XPS) and Direct Current (DC) polarization analyses. The fabricated transistor consisted of LTO as the channel layer, gold as source/drain terminals, lithium phosphorus oxynitride (LiPON) as the lithium-ion conductor, and copper as the gate terminal. The device exhibited clear hysteresis in transfer characteristics due to lithium insertion/extraction processes. Long-term potentiation (LTP) and long-term depression (LTD) measurements showed an asymmetric ratio of 1.425 and maximum/minimum conductance ratio of 7.83. When implemented in a deep neural network (DNN) for MNIST handwritten digit recognition, the device achieved 92.03% accuracy over 20 training epochs. Detailed transport mechanism analysis revealed the crucial role of oxygen vacancies and interface effects in device operation. Our preliminary findings establish LTO-based lithium-ion electrochemical transistors as promising candidates for energy-efficient neuromorphic computing applications, offering potential solutions to traditional Von Neumann architecture limitations.

25 ENERGY STORAGE↗
DOE OSTI2025

Facile Generation of Active Sites in Nodes of Ni-MFU-4l Metal–Organic Framework for Hydrogenation Reaction

Metal–organic frameworks (MOFs) represent a well-defined class of materials capable of incorporating catalytically active sites for gas-phase catalysis. However, the reducing conditions of hydrogenation catalysis can lead to nanoparticle formation in MOFs, which can significantly diminish the catalytic activity of single-site metals and reduce the longevity of MOF-based hydrogen solutions. In this work, we present a straightforward approach to accessing catalytically active single metal sites in a robust Ni-MFU-4l MOF for gas-phase hydrogenation without the formation of Ni nanoparticles. By carefully tuning the local node chemistry through postsynthetic exchange of the terminal ligand coordinated to the Ni(II) centers in the MOF, from −Cl to −OH or −HCOO, we can readily generate Ni–H active species. We further demonstrate, using in situ pair-distribution function analysis, that these Ni–H sites are the sole catalytically active sites in the terminal ligand-exchanged counterparts, whereas nanoparticles readily form in the parent Ni-MFU-4l-Cl under otherwise identical catalytic conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Electrospun Ti–Zr Oxide Heterostructures Enable Strongly Anchored Ultralow-Ir Anodes for Durable Acidic Oxygen Evolution

Proton-exchange-membrane water electrolysis (PEMWE) requires acidic oxygen-evolution-reaction (OER) anodes that combine high activity, high durability, and low Ir loading. Here, we report a Ti-Zr composite electrospun oxide (ESO) nanorod support that enables ultralow-Ir anodes for high-performance PEMWE. Zr-containing Ti oxide heterostructures stabilize anatase-rich TiO2, tune the local oxygen-coordination environment, and strengthen interfacial anchoring of IrOx under acidic anodic conditions. The electrospun nanorod network further creates an open, mechanically coherent catalyst layer that improves Ir utilization, ionomer penetration, and mass transport. At an anode loading of 0.2 mgIr cm-2, the optimized Ir/TiZr20-ESO anode delivers a PEMWE mass activity of 0.99 A mgIr-1 at 1.45 V, 28.3 and 43.0 times higher than commercial Ir black and commercial IrO2/TiO2, respectively. The same anode reaches 3.0 and 4.0 A cm-2 at 1.75 and 1.83 V, respectively, and sustains 2000 h operation at 2.0 A cm-2. Also, accelerated stress tests up to 525 hours over 31,500 cycles confirm promising long-term durability, with an insignificant performance decay of 0.4 μV per cycle. Density functional theory indicates that the Ti-Zr oxide heterostructure suppresses Ti demetallation and strengthens IrO2 interfacial binding, rationalizing the improved high-current-density stability.

25 ENERGY STORAGE↗
DOE OSTI2025

Exploring a New Regime of Molecular Orbital Physics in 4⁢d Cluster Magnets with Resonant Inelastic X-Ray Scattering

Molecular orbital systems with clusters of heavy transition metal (TM) ions are one of the most important classes of model materials for studying the interplay between local physics and effects of itinerancy. Despite a large number of candidates identified in the family of 4⁢d TM materials, an understanding of their physics from competing microscopic energy scales is still missing. Here, we bridge this gap by reporting the first resonant inelastic x-ray scattering (RIXS) measurement on a well-known series of Ru cluster magnets with a 6⁢H-perovskite structure Ba 3 ⁢M⁢Ru 2 ⁢O 9 (M 3+ = In 3+ , Y 3+ , La 3+ ) comprised of Ru dimers. In addition to providing a microscopic explanation for their anomalous magnetic properties, our RIXS measurements combined with theoretical modeling uncover a new regime of molecular orbital physics where the combined effect of large hopping and small spin-orbit coupling results in highly fragile electronic states in the Ru-dimer compounds directly manifested as an abrupt change in the RIXS spectrum accompanying a tiny change in the local structure tuned by the M-site ion. This unique combination of energy scales found only in the 4⁢d but not the 5⁢d cluster magnets highlights the value of these materials as a new platform for studying quantum phase transition involving molecular orbitals.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Vortex Matter in Confined Superconductors and Mesoscopic Hybrid Heterostructures. Final report

This program studied the fundamental features that underlie the behavior of hybrid ferromagnet/superconductor heterostructures both in the regime of magnetic coupling and proximity effect. In ferromagnet/superconductor hybrid structures, the source of superconducting correlations and ferromagnetism are spatially separated. Therefore, the interplay between ferromagnetism and superconductivity results in physical effects that are not easily observed in bulk superconductors and allows to tune the local superconducting and vortex properties, realizing, thus, a new class of materials. In the case of proximity effect the ferromagnet and the superconductor are in contact and leakage of superconducting pairs is allowed into the ferromagnetic layer. Typically, the decay length for the superconducting pair correlations in the ferromagnet is of the order of one nanometer due to the typically large ferromagnetic exchange field. However, a suitable magnetic structure in the ferromagnetic material can be used to align the spins of the superconducting pairs allowing much longer penetration of superconductivity in the magnetic material. These superconducting pairs with aligned spins can carry spin and provide the basis for superconducting spintronics devices. In the case of magnetic coupling the effect of a spatial inhomogeneous stray field produced by the ferromagnet substantially modifies the nucleation of the order parameter in the superconducting layer and can lead to a significant change in the local superconducting properties. Therefore, magnetically coupled planar ferromagnet-superconductor hybrid structures offer new avenues for manipulation of the superconductivity at the nanoscale and convenient means to control vortex dynamics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Tunable Oxygen Reduction Electrocatalysis by Phenazine-Modified Carbons (Final Report)

This project aims to systematically investigate the fundamental interfacial chemistry that underlies the four-electron, four-proton oxygen reduction reaction (ORR) mediated by heteroatom-doped graphitic carbon electrodes. Heteroatom-doped (Fe, N, etc.) graphitic carbons have emerged as a rich class of materials that are promising ORR catalysts in low temperature fuel cells because of their earth-abundant elements, extremely low cost, environmental harmlessness, and high tolerance to impurities in the fuel stream. However, despite decades of research, systematic efforts to improve the activity, selectivity, and durability of these catalysts has been hampered both by a complex heterogeneous distribution of potential N- and Fe-dopant active sites and by the inability to tune the local electronic structure and environment of the active site with molecular precision. Understanding the fundamental chemistry that influences the turnover-limiting and selectivity determining steps for ORR and other multielectron/multiproton electrocatalytic transformations requires new and innovative methods to prepare heteroatom active sites with molecular precision on carbon surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2009

Gaussian and Lognormal Models of Hurricane Gust Factors

A document describes a tool that predicts the likelihood of land-falling tropical storms and hurricanes exceeding specified peak speeds, given the mean wind speed at various heights of up to 500 feet (150 meters) above ground level. Empirical models to calculate mean and standard deviation of the gust factor as a function of height and mean wind speed were developed in Excel based on data from previous hurricanes. Separate models were developed for Gaussian and offset lognormal distributions for the gust factor. Rather than forecasting a single, specific peak wind speed, this tool provides a probability of exceeding a specified value. This probability is provided as a function of height, allowing it to be applied at a height appropriate for tall structures. The user inputs the mean wind speed, height, and operational threshold. The tool produces the probability from each model that the given threshold will be exceeded. This application does have its limits. They were tested only in tropical storm conditions associated with the periphery of hurricanes. Winds of similar speed produced by non-tropical system may have different turbulence dynamics and stability, which may change those winds statistical characteristics. These models were developed along the Central Florida seacoast, and their results may not accurately extrapolate to inland areas, or even to coastal sites that are different from those used to build the models. Although this tool cannot be generalized for use in different environments, its methodology could be applied to those locations to develop a similar tool tuned to local conditions.

Merceret, Frank↗