Search NASA⌕ Search

SEARCH · Search NASA

Results for “long-term cycling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Evaluation of Particle Degradation of a Ytterbium Disilicate Gas Turbine Coating in a Combustion Environment

Ytterbium disilicate (Yb2Si2O7) is a state-of-the-art topcoat material used in environmental barrier coatings (EBCs) to protect SiC-SiC composites from water vapor corrosion in gas turbine engines. However, it’s degradation by thermochemical and thermomechanical particle interactions may limit its use in next generation engine systems. Several static furnace tests have been performed on Yb2Si2O7 to elucidate methods of degradation, although dynamic testing in an engine-relevant environment has not been carried out. Ultimately, testing and evaluation of materials that incorporates all environmental damage modes will allow for an accurate assessment of long-term durability and operating lifetime. This work details the investigation of particle-induced erosion and corrosion of Yb2Si2O7 in NASA Glenn’s Erosion Burner Rig Facility. Coating durability was investigated as a function of test temperature, particle size, and deposition rate. Thermal cycling was also incorporated into testing to determine the interplay of heating/cooling cycles with particle degradation. Overall, these analyses will be used to determine coating robustness in an engine relevant environment.

Jamesa L Stokes↗

Contamination damage avoidance concepts for propulsion feed system components.

The potential gain in the reliability of reusable long-term mission vehicles through the minimization of component damage due to the ingestion of particulate contamination by feed system components has been recognized by the NASA-LeRC and MDAC, and a program to investigate these problems has been completed. This investigation covered the determination of the cycle life of a typical 2-in. poppet type of shutoff valve in an uncontaminated GH2 environment and then compared this component performance with simulated operation with GN2 and LN2 containing controlled amounts of AL2O2 contaminant particles. The original valve design was tested for contamination damage tolerance characteristics under full flow and cyclic operating conditions, redesigned to improve the damage tolerance to contaminants and then retested. A second method of approach to damage tolerance control was investigated through the evaluation of various types of particulate separation devices. The study included various types of dynamic separators but did not cover conventional filter assemblies.

Endicott, D. L.↗

Long-term variations of the solar wind proton parameters

Interplanetary plasma data taken near 1 AU by a variety of spacecraft (Imp 1, Vela 2-4, Explorer 33-35, and Heos 1) from 1963 to 1971 are used to study the long-term variations of the solar wind proton properties. An intercalibration among the different experiments is performed in order to obtain a coherent set of data. The most interesting result is a 40% reduction of the proton density between the minimum and the maximum of the solar activity cycle. The observed density variation occurs throughout the velocity range; however, a limited sample of data could suggest that at very low velocities (below 300 km/sec) the density is independent of the solar activity. The proton bulk velocity is remarkably constant during the period considered; small increases of the average speed occurring in 1968 and 1971 cannot be attributed to the solar cycle. No clear trend is exhibited by the proton temperature; differences among the various experiments probably have an instrumental origin.

Diodato, L.↗

Global changes: Impacts on habitability. A scientific basis for assessment

The feasibility of a major NASA research initiative to document, to understand, and if possible, to predict long-term (5 to 50 years) global changes that can affect the habitability of the Earth is addressed. The major factor contributing to change is human activity. The program discussed involves studies of the atmosphere, oceans, land, the cryosphere, and the biosphere. On decadal time scales, these regimes and the cycles of physical and chemical entities through them are coupled into a single interlocking system. Some part of this system can be studied in a straightforward manner (the atmosphere) and some with great difficulty (the biosphere).

Goody, R.↗

Long-term variability of dMe stars

Photographic B magnitudes of the four spot stars BY Dra (dM0e), CC Eri (K7 Ve), AU Mic (dM2.5e), and YZ CMi (dM4.5e) are reported which considerably extend the time baseline of the photoelectric data on these stars. The long-term variation of the stars in yearly mean light is investigated. It is found that both BY Dra and CC Eri exhibit long-term B-magnitude variations with amplitudes of about 0.3 to 0.4 magnitude and times between maximum and minimum light near 30 yr. No apparent variability is observed for AU Mic and YZ CMi. The possibility is discussed that the variability of BY Dra and CC Eri is connected with a starspot cycle, for which the period would be around 60 yr.

Phillips, M. J.↗

A study of the effects of Forbush decreases and the 11-year variation of cosmic rays out to approximately 16 AU

In this study the onset of the new solar modulation cycle in late 1977 has been observed out to 16 AU. 27-day average cosmic-ray data (E greater than 60 MeV) from Pioneers 10, 11 and IMP 8 for the period for 1973-1978, normalized to the ground-based neutron monitor rates, have been used. Observations indicate that the long-term modulation effects propagate outward radially at 200-300 Km/sec. Forbush decreases, in contrast, are local phenomena and the associated time delays between their occurrence at earth and out to a few AU are much shorter. The data yield a radial gradient of 2-3% per AU.

Lockwood, J. A.↗

Long-term thermal degradation and alloying constituent effects on five boron/aluminum composites

Thermal exposure effects on the properties of five boron/aluminum composite systems were experimentally investigated. The composite systems were 49 volume percent boron fibers (203 micron diameter) in aluminum-alloy matrices 1100 Al, 2024 Al, 3003 Al, 5052 Al, and 6061 Al. Specimens were thermally exposed up to 10,000 hours at 500 K and 590 K, up to 500 hours at 730 K, and up to 10,000 hours at 500 K and 590 K, up to 500 hours at 730 K, and up to 2000 thermal cycles between 200 K and 590 K. Composite longitudinal and transverse tensile strengths, longitudinal compression strength, and in-plane shear strength were determined. None of the systems was severely degraded by exposure at 590 K. The best performing system was B-2024 Al. Effects of matrix alloys on degradation mechanisms were experimentally investigated. Composite specimens and individual fibers were metallurgically analyzed with a scanning electron microscope and an electron microprobe to determine failure characteristics, chemical element distribution, and reaction layer morphology. Alloying constituents were found to be affect the composite degradation mechanisms as follows: alloys containing iron, but without manganese as a stabilizer, caused increased low-temperature degradation; alloys containing magnesium, iron, or manganese caused increased degradation; and alloys containing copper caused increased fiber strength.

Olsen, G. C.↗

Global ozone long-term trends from satellite measurements and the response to solar activity variations

Analysis of global ozone variations for the period April 1970 to December 1975 was performed by using the reprocessed Nimbus 4 backscattered ultraviolet (BUV) measurements of total ozone. A correlation coefficient of 0.97 is found between the 6-month running mean of global mean total ozone (filtered for mean semiannual, annual, and quasibiennial variations) and the 10.7-cm solar activity index. Correcting ozone for a time-dependent latitudinal bias relative to Dobson ozone measurements reduces to 2-3% the global mean ozone variation over the solar cycle. The solar ultraviolet variability required in a one-dimensional time-dependent radiative photochemical model to account for the observed ozone variation appears to be consistent with recent solar UV observations.

Keating, G. M.↗

Thermal Cycle and Capacitance Testing of Mezzo Industries Phase Changer Material Heat Capacitor

Effective Thermal management is essential for the safety and performance of human spacecraft, especially during long-duration missions with fluctuating heat loads. Phase Change Material (PCM) heat exchangers offer a compact, efficient solution by storing and releasing thermal energy through latent heat during phase transitions. This allows PCM systems to buffer transient thermal loads without immediate heat rejection, reducing the need for oversized radiators – particularly critical during ascent and re-entry when radiators are stowed. By maintaining stable temperatures in crew cabins and equipment bays, PCM technology enhances crew comfort, protects sensitive systems, and supports long-term mission sustainability with minimal mass and volume impact. A phase change material heat capacitor prototype, designed and built under a NASA Small Business Innovation Research grant by Mezzo Technologies, utilizes a laser welding microtube manufacturing process that promises increased reliability and performance over current manufacturing methods like brazing. This heat exchanger was tested through coolant thermal cycling within the expected flow rates and temperature range of the Orion spacecraft, the crewed spacecraft taking NASA astronauts to the moon under the Artemis Program. The useful heat storage capacitance was measured and compared to Orion spacecraft requirements.

Active Thermal Control Systems↗

Enzymatic capacities of skeletal muscle - Effects of different types of training

Long-term adaptation mechanisms to maintain homeostasis at increased levels of exertion such as those caused by regular exercise are described. Mitochondrial changes have been found to be a result of endurance exercises, while mitochondrial responses to other types of exercise are small. Further discussion is devoted to long-term changes in glucose transport, hexokinase, phosphofructokinase, pyruvate kinase, and the increased sensitivity of an endurance trained muscle to insulin. Less lactate has been found to be produced by the skeletal muscles at the same work rate after adaptation to endurance exercise training, and the capacity for the flux of the two-carbon acetyl chain through the citric acid cycle increases in skeletal muscles in response to endurance training. Finally, endurance training is noted to result in glycogen sparing and an increase in the capacity to utilize fatty acids.

Booth, F. W.↗

Characterization of the 20-Ah nickel-cadmium cell used for energy storage on the Orbiting Astronomical Observatory

Tests were conducted on 20-Ah sealed nickel cadmium cells to evaluate initial and long-term performance at various charge rates, temperatures and voltage-control levels. An average ampere-hour recharge of 103 percent per orbit at 13 C was able to maintain cell capacity; required watt-hour recharge on an orbital basis was 8 to 10 percent greater than required ampere-hour recharge. Cells exhibited an early life burn-in characteristic. A discharge after periods of repetitive cycling yielded two voltage plateaus which were temporarily eliminated by the discharge.

Ford, F. E.↗

Long-term storage effects-up-date

The long-term effects of storing batteries over a period of years prior to their use in a synchronous orbit application are discussed. A previous experiment is discussed where life testing was performed on cells after having stored the battery for a period of three years with the cell shorted and at a temperature on the order of 5-10 C. The test consisted of performing a sequence of 10 simulated eclipse seasons (equivalent in cycling of five years in synchronous orbit). Results of this test indicated very little degradation and change in the physical and chemical conditions of the cell. The program was extended for an additional year (battery was stored for four years) under the same conditions and testing. The results of the four year storage (one exception) indicate that no further change occurred that is significant from the three year test.

Scott, W. R.↗

Solar cycle evolution of high-speed solar wind streams

Large amplitude high-speed solar wind streams and streams with maximum speeds in excess of 700 km/sec are far more common in years of declining and minimum solar activity than near solar maximum. Further, the broadest solar wind streams observed directly with space probes during the years 1962-1974 occurred near solar minimum in 1974. Changes in the frequency and nature of solar wind stream structures at the orbit of earth appear to be directly related to the long-term evolution of regions of low density in the solar corona.

Bame, S. J.↗

Magnetically suspended Stirling cryogenic space refrigerator Status report

At the 1979 Cryogenic Engineering Conference, attention was given to conceptual designs of spaceborne cryogenic refrigeration systems which can provide long-term, unattended operation. Since that time, efforts have continued to translate one of those concepts into an engineering model. The present investigation is concerned with a refrigerator which was designed to generate 5 W of cooling power at a temperature of 65 K. The compression heat of the refrigerator is dissipated at a temperature of 300 K, and the output of the system is to be maintained reliably for a period of five years or longer. The refrigerator design is based on the Stirling cycle, which has an ideal efficiency equal to that of the Carnot cycle. Attention is given to some background information concerning a cryogenic refrigerator, the design of the refrigerator components, and the development status. The magnetic bearings and the linear motors have been tested at the component level.

Daniels, A.↗

Radiation-Resistant Ti/BN Coatings: Insights From 171 Days Exposure to Space Radiation and Atomic Oxygen in Low Orbit

Atmospheric Plasma Spray (APS) and Vacuum Plasma Spray (VPS) techniques were used to develop Ti/2 vol.% hBN coatings, for extreme space environments and tested aboard the International Space Station as part of the MISSE-17 (Materials International Space Station Experiments) program. The coatings were exposed to atomic oxygen, space radiation, and low-orbit thermal cycling. VPS coatings showed a 56% increase in microhardness, a 26% rise in elastic modulus, minimal porosity and crack density changes compared to APS coatings. The change in mechanical properties is attributed to the formation of TiO, TiO₂ and TiN from nitrogen retention, alongside radiation-induced dislocations, which enhanced surface hardening. The oxidation of titanium led to the formation of TiO and TiO₂, while boron nitride was retained and underwent transmutation in VPS coatings. XPS and EDS analyses confirmed the enhanced space-environment resistance of VPS coatings, making them ideal for long-term spacecraft protection in lunar and Martian conditions.

Abhijith Kunneparambil Sukumaran↗

Design of mechanical components for long-term performance

Review of the results of a NASA program designed to study advanced techniques for determining the long-term performance of rocket engine components. Aging and operational degradation mechanisms of metal valve seats are identified. Characterization of metal valve seat surfaces by optical signature analysis is described. The results of the development of a long-life 'zero leakage' metal valve seal designed to avoid failure by contamination, stress/strain, fatigue, and the deterioration of the surface by wear is reported. An analysis of a specific seat design showed that material strain prevention along all axes would prevent these failures. The design provided for refurbishment of the sealing surfaces during each valve cycle, thereby preventing cumulative surface damage.

Salvinski, R. J.↗

Comparison of seasonal variations of upper stratospheric ozone concentrations revealed by Umkehr and Nimbus 4 BUV observations

This paper reports the results of a comparison between upper stratospheric ozone concentration profiles in the region between 22 and 1.4 mbar, as determined from surface-based Umkehr observations and satellite Nimbus 4 BUV observations. The Umkehr data, consisting of monthly averages of observations extending over several years or longer, were obtained at three stations located in the Northern Hemisphere and two in the Southern Hemisphere. The BUV data were obtained during the period from May 1970 to March 1971. Aside from some bias in the magnitudes of the Umkehr and BUV data, marked annual cycles of ozone concentration in the upper stratosphere are clearly revealed. Above 4 mbar the profiles show a summer minimum and a winter maximum, while below 4 mbar the annual variation is reversed from this pattern. In the Northern Hemisphere the winter maximum is accompanied by a secondary minimum of 1- to 2-month duration near 3 mbar. This short-term minimum is much less obvious in the Southern Hemisphere data. Some of the problem of attempting to monitor long-term changes in the upper stratosphere are discussed briefly.

Deluisi, J. J.↗

Solar Activities Predictions: Long-Term Solar Activity

The need for long term solar activity predictions is addressed. The spatial organization of solar activity is described including applications for predictions, and ancient evidence for solar variability. Methods of predicting sunspot numbers are discussed. The inherent accuracy of the methods varies considerably, but a typical error bar 20%. The accuracy of sunspot cycle predictions is considered along with long term predictions of great solar events.

P S Mcintosh↗