Search NASA⌕ Search

SEARCH · Search NASA

Results for “low temperature drying”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Performance of alloy 600 in flowing commercial Cl salt at 600°-750°C

For the next generation of concentrating solar power (CSP) plants, K-Mg-Na chloride salts are being explored as a potential higher temperature thermal storage medium. However, there are concerns about compatibility of structural alloys with the salt. To move beyond simple static pot compatibility experiments while a pumped salt loop is being constructed, thermal convection loops were constructed from ~16wt.%Cr Ni-based alloy 600 and operated for 100-1000 h with peak temperatures of 700° and 750°C. These experiments indicated that alloy 600 was compatible up to 700°C with purified (i.e. low O2-) or dried (low H2O) industrial-sourced Mg-K-Na chloride salt with <10 µm/yr loss. Mass transfer was observed from the hot leg to the cold leg in each experiment and more surface deposits were observed with the dried salt. Post-exposure room temperature tensile tests showed minimal degradation of alloy 600 under these conditions.

Pint, Bruce↗
DOE OSTI2021

A Novel Platform for Algal Biomass Production Using Cellulosic Mixotrophy (CeMix) (Final Technical Report)

This novel project, branded CeMIX for cellulosic mixotrophy, targets solutions for several technological barriers limiting the deployment of algae cultivation in sunny, arid regions (specifically the southwest United States). Opening up the region for algae cultivation could increase DOE’s resource assessments and biofuel potential for the U.S. Mixotrophic metabolism in support of liquid fuel production is completely dependent on the availability of waste organic carbon in order to avoid diversion of food resources for fuel production. The use of cellulosic sugar hydrolysate (CSH) produced via the NREL process provided a standardized carbon source for study of the underlying biochemistry and metabolic adjustments to mixotrophy. Mixotrophic metabolism uses both photosynthetic CO 2 fixation and sugar oxidation to improve biomass productivity and harvest yield. The project was high-risk, high-reward in the sense that adding organic carbon to algal cultivation is an invitation for rapid-growth, heterotrophic contaminants to overtake the culture and consume mineral nutrients needed for algal growth. To help evade this outcome the project focused on acidophilic red algae that require low pH conditions with 40-48°C optimal temperature profiles that define them as low-range thermophiles. This is the only project in the BETO portfolio to utilize extreme conditions of low pH and high operating temperatures to control pathogens and competitors in mass culture. The project yielded five major outcomes. 1) Harvest densities of 5-10 g ash-free dry weight are easily achieved, providing a 10-fold reduction in water required and dewatering demand. 2) Catabolic repression of photosynthesis in G. sulphuraria is conditionally repressed by low oxygen. 3) Mixotrophic growth on cellulosic hydrolysate consumes all C6 and C5 sugars concomitant with increases in floridean starch with little change in lipid content. Protein content can be manipulated between 35 and 54 wt% by varying the C:N molar ratio from 10:1 to 20:1, respectively. 4) Mixotrophic cultures with up to 50 mM total sugar are remarkably stable at pH 2.5 and daily average reactor temperatures of 40°C. 5) Capital costs for glass tubular photobioreactors are prohibitive for liquid fuel production using a hydrothermal liquefaction processing pathway. The economic outlook for covered raceway ponds is better with a project minimum fuel selling price at $3.32 dm 3 GE -1 .

09 BIOMASS FUELS↗
DOE OSTI2020

Progression to Compatibility Evaluations in Flowing Molten Salts

Molten salt compatibility with structural alloys has been identified as a key issue for the development of Generation 3 concentrating solar power (CSP) systems with thermal storage. To accelerate this evaluation to pumped systems, the goal of this project was to conduct thermal convection loop (TCL) experiments with a peak temperature of ≥700°C and a typical temperature gradient of ~100°C. The experiments indicated that conventional ~16wt.%Cr Ni-based alloys are compatible up to 700°C with purified (i.e. low O) or dried (low H₂O) industrial-sourced Mg-K-Na chloride salt with <10 μm/yr loss. This two-year project was conducted based on the experimental and mechanistic understanding developed more than 60 years ago at Oak Ridge National Laboratory (ORNL). The first TCL experiment met the <15 μm/yr corrosion metric for this project with specimens of Ni-based alloy 600 exposed at 580°-700°C for 1000 h and post-exposure room temperature tensile tests showed minimal degradation. The second TCL experiment successfully deployed an electrochemical sensor from Argonne National Laboratory and had a peak temperature of 750°C but only ran for ~110 h due to a furnace failure. Both experiments used highly purified industrial-sourced salt with an O content of ~3 μg O/g salt and a Mg addition of 0.04 wt.%. In the second year, the Chloride Collective developed a more economical drying procedure such that the O content was much higher (>20,000 μg O/g salt). A third TCL experiment was conducted with a sensor and a peak temperature of 700°C using dried salt from the same industrial source and increased NaCl content (~20 wt.%). In addition to a 0.05% Mg addition to the salt, a Mg coupon was added in the coldest part of the loop which dissolved during the experiment. Again, small mass changes were noted for specimens of alloys 600 and C276 but the values were slightly higher than those measured in purified salt with Mg. A thin non-continuous and non-adherent oxide layer was deposited on most specimens containing Mg, Si and Al but Cr depletion also was observed. Both years included facilities qualification crucible experiments and then capsule experiments to confirm a baseline isothermal reaction rate. The first year capsule experiment led to the conclusion that the two-stage ORNL purification process using NH₄Cl and CCl₄ left the salt with a high Cl potential and a Mg addition (~0.05wt.%) was needed to lower the potential. The second year capsule experiments at 600° and 700°C found little difference in depth of attack for 0-0.25%Mg additions. In general, the complex reactions where salt can be trapped in the porous surface layer of metal indicated that mass change is an unreliable metric and average depth of Cr depletion is a better metric for assessing the extent of attack. These results have created a new baseline that is contrary to the recent published literature for chloride salts where mass losses have been reported that can be extrapolated to very significant annual metal loss rates. Chloride salt corrosion can be controlled and the results also indicate that salt purification to low O levels may not be necessary. However, additional TCL experiments are needed at different times and temperatures to generate important engineering information such as temperature dependent corrosion rates and reaction rate laws for extrapolation to long-term behavior and isolate the effect of salt additives and impurities.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Temperature-Time Modeling of Spent Fuel Cladding in Dry Storage Casks

This report uses thermal and decay heat modeling to investigate spent fuel performance and the potential for cladding to anneal in dry storage conditions. Annealing is an important feature to investigate in SNF cladding because it has a direct relationship to cladding response in storage, transportation and disposal conditions. Annealed cladding may have lower strength than unannealed cladding, however its increased ductility would provide better protection against rupture in high strain rate situations such as severe accidents. These consequences are the driver for this work however are outside of the scope of this report. The modeling focused on three representative storage systems, the TN-32B, MAGNASTOR with TSC-37 canister, and NUHOMS AHSM with a 32PTH2 canister. This covers the vertical dual-purpose, vertical ventilated and horizontal ventilated casks respectively. Decay heat modeling using high and low enrichment assemblies was used to bound the decay heat curves that might be expected in dry storage. To bound the temperature relationship, the storage casks were modeled starting at the design basis heat loads with heat decaying through time. Although the results are bounding there is not an attempt to maximize conservatism, rather the intent to form a reasonable upper limit on temperature that will be broadly applicable to the U.S. cask fleet. This will allow materials testing to focus on relevant conditions for annealing that may affect the U.S. spent fuel inventory. The results show a clear dependence on heat load pattern in time in Figure S-1 and Figure S-2. This dependence is due to the different assembly decay heat curves for different assemblies in preferentially loaded casks. It shows the need for careful decay heat modeling when examining in service fuel temperatures that are less than the cask design basis heat load. The body of the report shows percent cladding cutoffs of 300°C and 350 °C as well. These results can be used to inform testing and conclusions about cladding performance through time and the potential for cladding annealing during dry storage.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Project Phase 1 Report: Reducing Data Center Peak Cooling Demand and Energy Costs With Cold Underground Thermal Energy Storage (Cold UTES)

Cold Underground Thermal Energy Storage (Cold UTES) is an ultra-long duration grid energy storage technology. With Cold-UTES, low-cost grid power is converted to cold thermal energy and stored in the native subsurface rock at the point of use. Cold UTES is one approach within the general category of engineered geothermal systems. Cold UTES for peak-hour cooling of data centers (DCs) was studied for deployment in Maricopa County, Arizona and Loudoun County, Virgina using thermal storage capacities from 4 GWh-th to over 1,000 GWh-th (>1 Terawatt-hour). The two sites have different power and transmission systems, available grid energy resources, daily and seasonal load profiles, weather conditions, and grid regulatory requirements. The study results indicate high value for both locations and because of this, likely indicates value across most of the US and the world. The basis of the study was a 1,000 MW-e hourly electric use of DC computing and auxiliary loads, which was modeled as 1 GW-th of thermal load to a dry cooled heat rejection system - i.e. a cooling system that does not consume water. The electric power required for cooling the DC varies as the air temperature changes. In cold weather only the dry-coolers are used, with an electrical load for cooling load as low as 10 MW-e. In hot summer hours, chillers and dry- coolers are required, which raises the electrical load for cooling load to as much as 300 MW-e. The continuous and peak cooling electrical loads result in a grid interconnection requirement of no less than 1,300 MW-e. From both a grid and thermal design modeling perspective the 1.3 GW-e could either be a single facility or result from the total load at multiple sites.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

Relithiation process for direct regeneration of cathode materials from spent lithium-ion batteries

A method for the regeneration of cathode material from spent lithium-ion batteries is provided. The method includes dissolving a lithium precursor in a polyhydric alcohol to form a solution. Degraded cathode material containing lithium metal oxides are dispersed into the solution under mechanical stirring, forming a mixture. The mixture is heat treated within a reactor vessel or microwave oven. During this heat treatment, lithium is intercalated into the degraded cathode material. The relithiated electrode material is collected by filtration, washing with solvents, and drying. The relithiated electrode material is then ground with a lithium precursor and thermally treated at a relatively low temperature for a predetermined time period to obtain regenerated cathode material.

Belharouak, Ilias↗
DOE OSTI2025

Cold air quench control of local crystallization environment in fully air-processed carbon-based perovskite solar cells

Carbon-based perovskite solar cells (C-PSCs) present a low-cost route to efficient photovoltaic technology. Gas quenching is an essential process commonly used for solvent extraction in scalable module fabrication using solution processes, but film quality remains highly sensitive to the localized environmental processing temperature, especially during intermediate phase transitions before perovskite film high temperature annealing. In this study, we introduce a cold air quench strategy to precisely control the local crystallization temperature that simultaneously promotes uniform crystallization and facilitates strain relaxation in fully air-processed C-PSCs. It is found that implementing dry air at 10 °C as the quenching gas yields a champion power conversion efficiency (PCE) of 20.52 %, with preferential (110) orientation and reduced, homogenized in-plane strain. This newly developed technique of a cost-effective low temperature air quenching process also enhances carrier lifetime, reduces interface recombination, and improves charge extraction. Furthermore, this work presents cold air quenching as a scalable, economic method to control perovskite crystallization and strain in C-PSC fabrication, advancing the industrial viability of high-performance perovskite modules.

14 SOLAR ENERGY↗
DOE OSTI2021

Effect of water vapor and thermal history on nuclear waste feed conversion to glass

Water affects the glass melting process by interacting with the foam layer at the glass melt surface and by influencing the batch conversion reactions. Water vapor from the nuclear waste slurry feed maintains a high water vapor pressure in the melter atmosphere. To investigate to what extent water vapor affects the vitrification of nuclear waste in joule-heated, cold-top melters, a series of feed expansion experiments were performed under humid and dry atmospheres using samples of low-activity waste (LAW) melter feed simulants. Melting of feed pellets in the presence of water vapor slightly decreased the temperature of primary foam onset, but did not significantly affect the feed volume expansion by foaming or the foam-collapse temperature. Sets of feed expansion experiments and evolved gas analyses were also performed to check the effect of thermal history on LAW feed samples tested as direct slurry, loose powder, and slow- and fast-dried pellets.

Marcial, Jose↗
DOE OSTI2020

Economizing on Precious Metals in Three‐Way Catalysts: Thermally Stable and Highly Active Single‐Atom Rhodium on Ceria for NO Abatement under Dry and Industrially Relevant Conditions**

Abstract We show for the first time that atomically dispersed Rh cations on ceria, prepared by a high‐temperature atom‐trapping synthesis, are the active species for the (CO+NO) reaction. This provides a direct link with the organometallic homogeneous Rh I complexes capable of catalyzing the dry (CO+NO) reaction. The thermally stable Rh cations in 0.1 wt % Rh 1 /CeO 2 achieve full NO conversion with a turn‐over‐frequency (TOF) of around 330 h −1 per Rh atom at 120 °C. Under dry conditions, the main product above 100 °C is N 2 with N 2 O being the minor product. The presence of water promotes low‐temperature activity of 0.1 wt % Rh 1 /CeO 2 . In the wet stream, ammonia and nitrogen are the main products above 120 °C. The uniformity of Rh ions on the support, allows us to detect the intermediates of (CO+NO) reaction via IR measurements on Rh cations on zeolite and ceria. We also show that NH 3 formation correlates with the water gas shift (WGS) activity of the material and detect the formation of Rh hydride species spectroscopically.

Khivantsev, Konstantin↗
DOE OSTI2025

Biogas sequestration to carbon nanofibers via tandem catalytic strategies

Upgrading decentralized biogas represents a sustainable route to produce valuable products while mitigating two potent greenhouse gases, namely, methane (CH 4 ) and carbon dioxide (CO 2 ). Conventional dry reforming of CH 4 with CO 2 yields syngas with low H 2 /CO ratios (≤1) and requires high temperatures (>800 °C) to overcome equilibrium constraints and abate coke deposition, which limits commercial implementation. Here we demonstrate the conversion of biogas into value-added carbon nanofibers via reaction integration in tandem reactors, while reducing the reaction temperature, shifting equilibrium limits and yielding H 2 -enriched syngas (H 2 /CO = 2–3) as a byproduct. Experimental and theoretical insights reveal that potassium (K) modification enhances carbon nanofiber formation due to synergistic effects via a balanced interplay between KO x -induced cobalt facets and cobalt carbide species. In conclusion, the energy cost and CO 2 footprint analyses highlight the potential advantages of tandem processes for the sustainable upgrading of biogas into valuable solid carbon products.

09 BIOMASS FUELS↗
DOE OSTI2024

Key results from examinations of seven high burnup pressurized water reactor spent nuclear fuel rods

At present, spent nuclear fuel (SNF) assemblies discharged from US commercial power plants are placed into dry storage following a short cooling time (<10 years) in the plant’s spent fuel pool. The process of packaging the spent fuel into dry-storage canisters includes a drying step to remove residual water from the canister. During the drying process, the fuel rod cladding may reach temperatures as high as 400°C. Oak Ridge National Laboratory (ORNL) is performing destructive examinations of high burnup (HBU) (>45 GWd/MTU) SNF rods to address knowledge and data gaps related to extended interim storage and eventual transportation for disposal. The rods examined include four different kinds of fuel rod cladding: standard Zircaloy-4 (Zirc-4), low-tin (LT) Zirc-4, ZIRLO, and M5. Three rods were subjected to a thermal transient to assess the effects of decay-heat-driven high temperatures expected during vacuum drying of the fuel as it is prepared for interim dry storage. The examinations focus on the composite fuel rod performance, as compared with the performance of defueled rod cladding, and establish the baseline mechanical properties of a fuel rod before interim dry storage. The key results of these examinations are presented, including the measured mechanical and fatigue properties, observations of cladding hydrogen pickup and hydride reorientation effects on rod performance, effects of the simulated drying temperatures on rod performance, and general conclusions of SNF performance in extended interim dry storage and transport. The rods were found to be strong and durable in the expected loading conditions, even considering the formation of radial hydrides associated with vacuum drying. The combined testing provides a broad body of data supporting extended interim storage and transportation performance of HBU spent fuel.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Influence of Transition Metal Ion Contaminants on the Performance of Amine-Based Solid Sorbents in Direct Air Capture

Amine-functionalized solid sorbents are a class of sorbent materials proposed for direct air capture (DAC) of CO 2 , yet their long-term performance is susceptible to degradation under realistic operating conditions. Many amines are not thermodynamically stable in air, and amine sorbents oxidize while in use during DAC temperature swing adsorption processes. In this study, we investigate the role of transition metal ion contaminants, specifically Cu 2+ , Fe 2+ , and Ni 2+ , on the oxidative degradation of poly(ethylenimine) (PEI)-impregnated SBA-15 sorbents. By introducing metal ions via different modes mimicking both synthesis-related impurities and impurities derived from environmental exposure, we systematically evaluate sorbent stability after exposure to dry air at an elevated temperature. Thermogravimetric CO 2 uptake measurements reveal that even trace levels of Cu and Fe (as low as ∼4 ppm) can lead to measurable sorbent deactivation after oxidative aging, despite negligible loss in the performance of the control samples. In situ infrared, UV–vis, and X-ray photoelectron spectroscopies indicate that these metals catalyze radical-driven oxidation pathways, altering the chemical structure of the sorbent and accelerating degradation. Our findings underscore the need to account for trace metal contamination during DAC sorbent synthesis and deployment and highlight the importance of environmental contamination pathways.

CO2 capture↗
DOE OSTI2020

Novel structured Sm 0.5 Sr 0.5 CoO 3-δ cathode for intermediate and low temperature solid oxide fuel cells

The performance of solid oxide fuel cell (SOFC) can be significantly enhanced using nanostructured cathode obtained by infiltration/impregnation method. However, this method has been limited due to multi-step preparation process and instability of the obtained nanoscale catalyst under long-term operation. We report here a simple, cost-effective and reproducible approach to fabricate nanostructured Sm 0.5 Sr 0.5 CoO 3-δ (SSC) cathode with enhanced performance and stability. The SSC powders were prepared by a freeze-drying method through a combustion route using Pluronic F-127 as the template. The SSC freeze-drying powders have unique morphology and a significant phase change at 750 °C. The oxygen non-stoichiometry (δ) of the SSC powders is 0.18 at room temperature, while the δ values are 0.66, 0.75 and 0.90 at 600 °C, 700 °C and 800 °C, respectively. The novel structured SSC cathode was prepared by screen-printing and one-step sintering process using the freeze-drying SSC powders. Maximum cell power densities of 0.83 and 1.13 W cm -2 are achieved at 550 °C and 600 °C, respectively for single cells with the novel structured SSC cathode. Moreover, single cells show excellent stability at 600 °C under a current density of 600 mA cm -2 over 250 h. This work expands opportunities to exploit nanotechnology in a wide range of intermediate and low temperature energy conversion devices.

25 ENERGY STORAGE↗
DOE OSTI2024

Uncertainty in determining carbon dioxide removal potential of biochar

A quantitative and systematic assessment of uncertainty in life-cycle assessment is critical to informing sustainable development of carbon dioxide removal (CDR) technologies. Biochar is the most commonly sold form of CDR to date and it can be used in applications ranging from concrete to agricultural soil amendments. Previous analyses of biochar rely on modeled or estimated life-cycle data and suggest a cradle-to-gate range of 0.20–1.3 kg CO 2 net removal per kg of biomass feedstock, with the range reported driven by differences in energy consumption, pyrolysis temperature, and feedstock sourcing. Herein, we quantify the distribution of CDR possible for biochar production with a compositional life-cycle inventory model paired with scenario-aware Monte Carlo simulation in a 'best practice' (incorporating lower transportation distances, high pyrolysis temperatures, high energy efficiency, recapture of energy for drying and pyrolysis energy requirements, and co-generation of heat and electricity) and 'poor practice' (higher transportation distances, lower pyrolysis temperatures, low energy efficiency, natural gas for energy requirements, and no energy recovery) scenarios. In the best-practice scenario, cradle-to-gate CDR (which is representative of the upper limit of removal across the entire life cycle) is highly certain, with a median removal of 1.4 kg of CO 2 e/kg biomass and results in net removal across the entire distribution. In contrast, the poor-practice scenario results in median net emissions of 0.090 kg CO 2 e/kg biomass. Whether this scenario emits (66% likelihood) or removes (34% likelihood) carbon dioxide is highly uncertain. The emission intensity of energy inputs to the pyrolysis process and whether the bio-oil co-product is used as a chemical feedstock or combusted are critical factors impacting the net carbon dioxide emissions of biochar production, together responsible for 98% of the difference between the best- and poor-practice scenarios.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Capturing O2 Desorption Through Isoconversional Kinetics for CFD Application

The present work examines desorption mechanisms and kinetics of the calcium-doped strontium perovskite at 25% calcium content (i.e., Sr_0.75 Ca_0.25 FeO_(3-δ)). Laboratory-scale, low inventory, fixed bed redox cycle experiments were developed and conducted in both dry and steam-based environments for three isothermal temperatures, 450, 500 and 550C. The temporal evolution of the conversion extent of the material sample over the redox cycles were obtained through the analysis of the gaseous products of the redox reactions. Using subsequently isoconversional differential methods, it was found that the activation energy exhibits a strong dependence on the extent of conversion during the desorption of this perovskite. In addition, the reconstruction of the reaction model showed that the desorption kinetics are controlled by a three-step mechanism. A successful a priori verification of the isoconversional desorption kinetics against the dry and steam-based environment desorption experimental data are shown.

Konan, Ndri A.↗
DOE OSTI2024

Microwave-Assisted Syngas Cleanup: Catalytic Reforming of Gasifier Tar Using a Low-Cost Iron Catalyst

In this work, we studied the microwave-assisted catalytic dry reforming of toluene using Fe/Al2O3 as a catalyst, under CO2 at different reaction temperatures. The toluene reforming reaction was conducted using microwave and conventional thermal reactors. The results showed that under microwave irradiation, a higher CO2 and toluene conversions, as well as better hydrogen yield can be observed compared to conventional toluene reforming at the same reaction temperature. The catalyst stability test was also investigated. Three reaction pathways were observed during microwave reaction: the toluene decomposition produces initial hydrogen and carbon deposit on the catalyst; the formation of methane and benzene suggests toluene hydrodemethylation that took place secondly; toluene hydrogenolysis forms light alkanes such as methane, and through reforming reaction under CO2 to syngas. The pre- and post-reaction catalyst characterizations were done to reveal the structure-reactivity relationships and compare the catalyst structure after microwave and conventional reactions.

Bai, Xinwei↗
DOE OSTI2020

Emergence of robust anthropogenic increase of heat stress-related variables projected from CORDEX-CORE climate simulations

The information of when and where region-specific patterns in both mean and extreme temperatures leading to heat stress will emerge from the present-day climate variability is important to plan adaptation options, but to date studies on this issue still remain limited and fragmented. Here, we estimate the time of emergence (TOE) of temperature and wet-bulb temperature (Tw), a better indication of heat stress, using fine-scale, long-term regional climate model projections under the RCP2.6 and RCP8.5 scenarios across six different domains. Differently from previous studies, the TOE is determined using three methods applied on impact-relevant variables: two different signal-to-noise frameworks based on summer mean temperature and Tw and a statistical test to identify significant differences in daily extreme distributions. The TOE response to RCP2.6 and RCP8.5 with respect to the end of 20th century variability differs significantly regardless of which TOE metric is applied. For summer mean temperature, the land fraction reaching TOE is expected to exceed 90% by the 2050s under the RCP8.5, whereas the increase rate of land exposure to TOE tends to stagnate over time under the RCP2.6 so that more than 40% of land will not experience TOE by the end of the 21st century. Compared to temperature, the TOE of Tw is reached earlier in most of the wet tropics but is delayed in hot and dry regions because of the nonlinear response of Tw to humidity. For both temperature and Tw, the TOE appears earlier in regions with low baseline variability, such as in the tropics. Despite the uncertainties arising from the choice of TOE metrics, the vast majority of regions in Africa and southeast Asia experience TOE in the early 21st century under both the RCP2.6 and RCP8.5 scenarios, which stresses the urgent need for developing adequate adaptation strategies in these regions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Assessing carbon storage capacity and saturation across six central US grasslands using data–model integration

Abstract. Future global changes will impact carbon (C) fluxes and pools in most terrestrial ecosystems and the feedback of terrestrial carbon cycling to atmospheric CO2. Determining the vulnerability of C in ecosystems to future environmental change is thus vital for targeted land management and policy. The C capacity of an ecosystem is a function of its C inputs (e.g., net primary productivity – NPP) and how long C remains in the system before being respired back to the atmosphere. The proportion of C capacity currently stored by an ecosystem (i.e., its C saturation) provides information about the potential for long-term C pools to be altered by environmental and land management regimes. We estimated C capacity, C saturation, NPP, and ecosystem C residence time in six US grasslands spanning temperature and precipitation gradients by integrating high temporal resolution C pool and flux data with a process-based C model. As expected, NPP across grasslands was strongly correlated with mean annual precipitation (MAP), yet C residence time was not related to MAP or mean annual temperature (MAT). We link soil temperature, soil moisture, and inherent C turnover rates (potentially due to microbial function and tissue quality) as determinants of carbon residence time. Overall, we found that intermediates between extremes in moisture and temperature had low C saturation, indicating that C in these grasslands may trend upwards and be buffered against global change impacts. Hot and dry grasslands had greatest C saturation due to both small C inputs through NPP and high C turnover rates during soil moisture conditions favorable for microbial activity. Additionally, leaching of soil C during monsoon events may lead to C loss. C saturation was also high in tallgrass prairie due to frequent fire that reduced inputs of aboveground plant material. Accordingly, we suggest that both hot, dry ecosystems and those frequently disturbed should be subject to careful land management and policy decisions to prevent losses of C stored in these systems.

58 GEOSCIENCES↗