Search NASA⌕ Search

SEARCH · Search NASA

Results for “lunar laser ranging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Comparison of polar motion results using lunar laser ranging

A comparison of polar motion results from three sources (Bureau International de l'Heure (BIH), Defense Mapping Agency Hydrographic/Topographic Center (DMAHTC-Doppler), the International Polar Motion Service (IPMS)) was performed using lunar laser ranging (LLR) data. The rms errors, both of the LLR data and of the determinations of polar motion by the three services, decreased in recent times. The BIH and Doppler polar motion are comparable in quality (12 + or - 6 cm for BIH values taken from August 1976 through May 1980, 14 + or - 7 cm for Doppler results taken from June 1977 through May 1980). The IPMS errors were substantially larger (33 + or - 7 cm for data taken from August 1976 through May 1980). All three analyses give 13 + or - 3 cm as an estimate for the combined LLR modeling, fitting, and instrumental error (noise) for the last four years.

Dickey, J. O.↗
NASA NTRS1978

High-precision gravimetric survey in support of lunar laser ranging at Haleakala, Maui, 1976 - 1978

The planning, observations and adjustment of high-precision gravity survey networks established on the islands of Maui and Oahu as part of the geodetic-geophysical program in support of lunar laser ranging at Haleakala, Maui, Hawaii are described. The gravity survey networks include 43 independently measured gravity differences along the gravity calibration line from Kahului Airport to the summit of Mt. Haleakala, together with some key points close to tidal gauges on Maui, and 40 gravity differences within metropolitan Honolulu. The results of the 1976-1978 survey are compared with surveys made in 1961 and in 1964-1965. All final gravity values are given in the system of the international gravity standardization net 1971 (IGSN 71); values are obtained by subtracting 14.57 mgal from the Potsdam value at the gravity base station at the Hickam Air Force Base, Honolulu.

Schenck, B. E.↗
NASA NTRS1994

Determination of the extragalactic-planetary frame tie from joint analysis of radio interferometric and lunar laser ranging measurements

Very Long Baseline Interferometry (VLBI) observations of extragalactic radio sources provide the basis for defining an accurate non-rotating reference frame in terms of angular positions of the sources. Measurements of the distance from the Earth to the Moon and to the inner planets provide the basis for defining an inertial planetary ephemeris reference frame. The relative orientation, or frame tie, between these two reference frames is of interest for combining Earth orientation measurements, for comparing Earth orientation results with theories referred to the mean equator and equinox, and for determining the positions of the planets with respect to the extragalactic reference frame. This work presents an indirect determination of the extragalactic-planetary frame tie from a combined reduction of VLBI and Lunar Laser Ranging (LLR) observations. For this determination, data acquired by LLR tracking stations since 1969 have been analyzed and combined with 14 years of VLBI data acquired by NASA's Deep Space Network since 1978. The frame tie derived from this joint analysis, with an accuracy of 0.003 sec, is the most accurate determination obtained so far. This result, combined with a determination of the mean ecliptic (defined in the rotating sense), shows that the mean equinox of epoch J2000 is offset from the x-axis of the extragalactic frame adopted by the International Earth Rotation Service for astrometric and geodetic applications by 0.078 sec +/- 0.010 sec along the y-direction and y 0.019 sec +/- 0.001 sec. along the z-direction.

Folkner, W. M.↗
NASA NTRS1993

Stochastic Parameters in Lunar Laser Ranging

This paper summarizes the underlying Kalman approach and highlights the techniques, algorithms, and results of its implementation.

lunar laser ranging dynamical astronomy stochastic↗
NASA NTRS1993

Stochastic Parameters in Lunar Laser Ranging

This oral presentation describes the techniques, algorithms, and results of incorporatng a Kalman-smoothing technique into the square-root information filter when estimating deterministic and stochastic parameters relating to Earth, the Moon, and the lunar and planetary ephemerides.

lunar laser ranging ephemerides stochastic paramet↗
NASA NTRS1972

Lunar laser ranging data deposited in the National Space Science Data Center: Filtered observations for September 1969 through June 1970 and unfiltered photon detections for July through December 1970

The technique of laser ranging to a reflector fixed on the lunar surface is discussed. The causes for initial low rate of data acquisition are explained. The documentation to be used in conjunction with the deposition of the filtered data in the National Space Science Data Center are documented. Filtered data obtained during laser operations between the McDonald Observatory and the reflector at Tranquility Base during the interval September 1969 through June 1970 are presented. The unfiltered photon detections for the succeeding six months are examined.

Mulholland, J. D.↗
NASA NTRS1971

The lunar laser ranging experiment

With data from two or more well-located observing stations, the lunar range can be corrected accurately for the effects of polar motion and fluctuations in the earth's rotation rate. Very accurate corrections can be made for the earth tides at each station. It appears that the use of lasers giving roughly 0.1-msec pulse lengths is highly desirable. With them, single-shot ranging accuracies of about 3 cm are expected. The actual lunar range results will be analyzed by fitting a numerical integration for the lunar motion to the data. A mathematical model for lunar range is given. Tests of the theory of gravitation are considered.

Bender, P. L.↗
NASA NTRS2005

Potential capabilities of lunar laser ranging for geodesy and relativity

Here, we review the LLR technique focusing on its impact on Geodesy and Relativity. We discuss the modem observational accuracy and the level of existing LLR modeling. We present the near-term objectives and emphasize improvements needed to fully utilize the scientific potential of LLR.

earth - moon dynamics↗
NASA NTRS2012

Large-Scale Hollow Retroreflectors for Lunar Laser Ranging at Goddard Space Flight Center

Laser ranging to the retroreflector arrays placed on the lunar surface by the Apollo astronauts and the Soviet Luna missions have dramatically increased our understanding of gravitational physics along with Earth and Moon geophysics, geodesy, and dynamics. Although the precision of the range measurements has historically been limited by the ground station capabilities, advances in the APOLLO instrument at the Apache Point facility in New Mexico is beginning to be limited by errors associated with the lunar arrays. We report here on efforts at Goddard Space Flight Center to develop the next generation of lunar retroreflectors. We will describe a new facility that is being used to design, assemble, and test large-scale hollow retroreflectors. We will also describe results from investigations into various bonding techniques used to assemble the open comer cubes and mirror coatings that have dust mitigation properties.

Preston, Alix↗
NASA NTRS1973

The lunar laser ranging experiment.

The scientific objectives achievable through high-accuracy range measurements to lunar retroreflectors are considered. A specific study of design questions related to the operation of retroreflectors on the lunar surface indicated that a reflector panel containing a number of solid fused silica corner reflectors would be capable of maintaining essentially diffraction limited performance under direct solar illumination. Initial Apollo 11 observations are discussed together with the installation of additional lunar retroreflectors in connection with the Luna 17, Apollo 14, Apollo 15, and Luna 21 missions. Range measurements at the McDonald Observatory are considered along with new results from lunar range data, and prospects regarding future lunar ranging stations.

Bender, P. L.↗
NASA NTRS2012

Corner-Cube Retroreflector Instrument for Advanced Lunar Laser Ranging

A paper describes how, based on a structural-thermal-optical-performance analysis, it has been determined that a single, large, hollow corner cube (170- mm outer diameter) with custom dihedral angles offers a return signal comparable to the Apollo 11 and 14 solid-corner-cube arrays (each consisting of 100 small, solid corner cubes), with negligible pulse spread and much lower mass. The design of the corner cube, and its surrounding mounting and casing, is driven by the thermal environment on the lunar surface, which is subject to significant temperature variations (in the range between 70 and 390 K). Therefore, the corner cube is enclosed in an insulated container open at one end; a narrow-bandpass solar filter is used to reduce the solar energy that enters the open end during the lunar day, achieving a nearly uniform temperature inside the container. Also, the materials and adhesive techniques that will be used for this corner-cube reflector must have appropriate thermal and mechanical characteristics (e.g., silica or beryllium for the cube and aluminum for the casing) to further reduce the impact of the thermal environment on the instrument's performance. The instrument would consist of a single, open corner cube protected by a separate solar filter, and mounted in a cylindrical or spherical case. A major goal in the design of a new lunar ranging system is a measurement accuracy improvement to better than 1 mm by reducing the pulse spread due to orientation. While achieving this goal, it was desired to keep the intensity of the return beam at least as bright as the Apollo 100-corner-cube arrays. These goals are met in this design by increasing the optical aperture of a single corner cube to approximately 170 mm outer diameter. This use of an "open" corner cube allows the selection of corner cube materials to be based primarily on thermal considerations, with no requirements on optical transparency. Such a corner cube also allows for easier pointing requirements, because there is no dependence on total internal reflection, which can fail off-axis.

Turyshev, Slava G.↗