SEARCH · Search NASA
Results for “lunar transfer”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Rideshare Strategies for Small Mars Missions
Frequent low-cost access to Mars can be enabled by taking advantage of the increasing number of rideshare-compatible launches. The cost to manifest a small spacecraft as a secondary can be a small fraction of the cost of a dedicated launch. However, not all rideshare opportunities are equally suitable for a mission to Mars. Much depends on the delivery orbit, mass available, launch date, and propulsion strategy. This paper outlines various mission starting points along with corresponding methods to deliver payloads to Mars from each option. These starting points include low-Earth Orbit (LEO), geosynchronous transfer orbit (GTO), Lunar transfer orbit (LTO), and Earth escape.
Clementine Engineering Experiments Program.
Spacecraft must survive and operate reliably in the space environment for long periods of time. Radiation, temperature variations, spacecraft charging, surface contamination, and micrometeoroids/space debris all present environmental challenges to spacecraft missions. The environmental issues associated with these effects require in-situ space experiments to properly quantify the environment and its effects. To obtain data on specific microelectronic and sensor systems in the space environment, several engineering experiments were developed for the Clementine spacecraft and the Clementine lunar transfer booster or Interstage Adapter Satellite (ISAS). These platforms allowed testing of advanced spacecraft microelectronic and sensor devices in a lunar transfer orbit that intersects Earth's radiation belts and debris environment and in interplanetary space where direct exposure to solar flares, Galactic Cosmic Rays, and micrometeoroids was possible. A suite of experiments was developed by the Naval Research Laboratory (NRL), the Jet Propulsion Laboratory (JPL), NASA Langley Research Center (LaRC), the Aerospace Corporation, and NASA Goddard Space Flight Center (GSFC) to investigate in detail specific radiation and environmental reliability issues. This paper presents an introduction to the issues being investigated, the instruments provided for the mission, and the rationale for the engineering program.
Postflight Evaluation of Atlas-Centaur AC-6 (Launched August 11, 1965)
The sixth Atlas Centaur vehicle (AC-6) was successfully launched from the Eastern T e s t Range, Complex 36B, on August 11, 1965, at 0931:04.430 EST. A 2084-pound dynamic model of the Surveyor payload was placed in a simulated lunar transfer trajectory. Vehicle systems operated satisfactorily and all the flight objectives were accomplished. Lift-off within 4 seconds of the window opening demonstrated the launch-on-time capability of the vehicle were accurately compensated for by the Centaur guidance system. the Surveyor model into a near-perfect lunar transfer trajectory would have resulted in an impact of the moon without a midcourse correction. To hit the precise target area on the lunar surface, the required correction would have been 4.25 meters per second, which is well within the spacecraft capability. Normal thrust and impulse levels were obtained with both the A t l a s and Centaur propulsion systems. However, a sizeable thrust overshoot on startup of the Centaur engines has not been resolved. A propellant-utilization system used for the first time on the Centaur, accurately controlled the fuel and oxidant consumption. The turnaround and retrothrust maneuver were performed without incident. Relatively high longitudinal modal excitations and lateral payload excitations were obtained at lift-off; these high perturbations are believed t o be related t o the launcher holddown arms. Nominal temperatures were recorded for both the external vehicle skin and the payload compartment; however, abnormally low temperatures were measured in the forward equipment area, which may have resulted from leakage of cold helium purge gas. All vehicle electrical systems performed satisfactorily; the only difficulty with the RF systems was obtained with the C-band transponder. of the vehicle instrumentation yielded valid data. The AC-6 vehicle was constructed with several new lightweight designs including the forward bulkhead, thrust barrel, interstage adapter and tank skin thickness reduction from 0.016 t o 0.014 inch. No deficiencies were observed in any of these new structural elements.
Lunar Browser trajectory tool
The Lunar Browser is a tool developed at NASA Ames Research Center for building, processing, and analyzing a database of lunar transfer trajectory solutions. Examples of intended uses include design trades for lunar missions and preliminary assessments of key parameters such as launch opportunities, delta-v and propulsion budgets, communication windows, eclipse durations, and lunar landing windows. The Lunar Browser tool is in the development phase and it is already producing results in its current form to address various NASA program requirements, proposals, and mission trajectories. The tool has also been used for research analysis in trajectory design, including a first publication regarding its application to the CLPS and Artemis programs. In particular, the results included transfers to lunar frozen orbits. Future work include the generation of more trajectories to expand the existing database and the optimization of the results.
On-Orbit Lunar Modulation Transfer Function Measurements for the Moderate Resolution Imaging Spectroradiometer
Spatial quality of an imaging sensor can be estimated by evaluating its modulation transfer function (MTF) from many different sources such as a sharp edge, a pulse target, or bar patterns with different spatial frequencies. These well-defined targets are frequently used for prelaunch laboratory tests, providing very reliable and accurate MTF measurements. A laboratory-quality edge input source was included in the spatial-mode operation of the Spectroradiometric Calibration Assembly (SRCA), which is one of the onboard calibrators of the Moderate Resolution Imaging Spectroradiometer (MODIS). Since not all imaging satellites have such an instrument, SRCA MTF estimations can be used as a reference for an on-orbit lunar MTF algorithm and results. In this paper, the prelaunch spatial quality characterization process from the Integrated Alignment Collimator and SRCA is briefly discussed. Based on prelaunch MTF calibration using the SRCA, a lunar MTF algorithm is developed and applied to the lifetime on-orbit Terra and Aqua MODIS lunar collections. In each lunar collection, multiple scan-directionMoon-to-background transition profiles are aligned by the subpixel edge locations from a parametric Fermi function fit. Corresponding accumulated edge profiles are filtered and interpolated to obtain the edge spread function (ESF). The MTF is calculated by applying a Fourier transformation on the line spread function through a simple differentiation of the ESF. The lifetime lunar MTF results are analyzed and filtered by a relationship with the Sun-Earth-MODIS angle. Finally, the filtered lunarMTF values are compared to the SRCA MTF results. This comparison provides the level of accuracy for on-orbit MTF estimations validated through prelaunch SRCA measurements. The lunar MTF values had larger uncertainty than the SRCA MTF results; however, the ratio mean of lunarMTF fit and SRCA MTF values is within 2% in the 250- and 500-m bands. Based on the MTF measurement uncertainty range, the suggested lunar MTF algorithm can be applied to any on-orbit imaging sensor with lunar calibration capability.
Nonequilibrium effects on the aerothermodynamics of transatmospheric and aerobraking vehicles
A 3D CFD algorithm is used to study the effect of thermal and chemical nonequilibrium on slender and blunt body aerothermodynamics. Both perfect gas and reacting gas air models are used to compute the flow over a generic transatmospheric vehicle and a proposed lunar transfer vehicle. The reacting air is characterized by a translational-rotational temperature and a vibrational-electron-electronic temperature and includes eight chemical species. The effects of chemical reaction, vibrational excitation, and ionization on lift-to-drag ratio and trim angle are investigated. Results for the NASA Ames All-body Configuration show a significant difference in center of gravity location for a reacting gas flight case when compared to a perfect gas wind tunnel case at the same Mach number, Reynolds number, and angle of attack. For the same center of gravity location, the wind tunnel model trims at lower angle of attack than the full-scale flight case. Nonionized and ionized results for a proposed lunar transfer vehicle compare well to computational results obtained from a previously validated reacting gas algorithm. Under the conditions investigated, effects of weak ionization on the heat transfer and aerodynamic coefficients were minimal.
Density, pressure and temperature effects on heat transfer in lunar material
Thermal conductivity of Apollo 11 lunar fines as function of temperature, pressure and bulk density
Charge transfer in lunar materials - Interpretation of ultraviolet-visible spectral properties of the moon
Explore the source record for details and available documents.
Propulsion for the lunar mission
The paper describes the selection process utilized by NASA during the conduct of the 90-day study of the mission set that is known as the Space Exploration Initiative (SEI). It is directed specifically toward propulsion system definition and selection, with emphasis on the proposed Lunar Transfer Vehicle and the Lunar Exploration Vehicle. Results of trade studies show that selection cannot be readily made on the basis of engine performance alone, because the cost of launching hardware elements and the required propellant are very high. A decision must be made to use either life-cycle costs or annual program costs as the economic figure of merit, because they drive the selection in opposite directions.
Lunar transportation system
The University Space Research Association (USRA) requested the University of Minnesota Spacecraft Design Team to design a lunar transportation infrastructure. This task was a year long design effort culminating in a complete conceptual design and presentation at Johnson Space Center. The mission objective of the design group was to design a system of vehicles to bring a habitation module, cargo, and crew to the lunar surface from LEO and return either or both crew and cargo safely to LEO while emphasizing component commonality, reusability, and cost effectiveness. During the course of the design, the lunar transportation system (LTS) has taken on many forms. The final design of the system is composed of two vehicles, a lunar transfer vehicle (LTV) and a lunar excursion vehicle (LEV). The LTV serves as an efficient orbital transfer vehicle between the earth and the moon while the LEV carries crew and cargo to the lunar surface. Presented in the report are the mission analysis, systems layout, orbital mechanics, propulsion systems, structural and thermal analysis, and crew systems, avionics, and power systems for this lunar transportation concept.
Space Station requirements and transportation options for lunar outpost
Preliminary design studies conducted by NASA are summarized which determined the requirements of the Space Station Freedom and transportation options for the establishment of a lunar outpost. Three phases are defined - emplacement, consolidation, and utilization - to describe the gradual development of the outpost. The lunar transportation system is based on the use of an earth-to-orbit and an LEO-lunar surface system for moving vehicles, propellant, crew, and cargo to the outpost. The vehicle-design and size requirements are defined for the reusable lunar-transfer vehicle and the lunar-excursion vehicle. Space Station Freedom is established as the LEO transportation node which transfers the required payloads to the excursion spacecraft following a 300-km low lunar orbit. The proposed lunar excursion vehicle is theorized to be capable of delivering 33 tons of cargo to the surface of the moon in the cargo-expendable mode.
Radiative heat transfer in the lunar and Mercurian surfaces
Radiative heat transfer in lunar and Mercurian surfaces, discussing radiative heat transfer in powders
Propulsion needs for lunar/Mars missions
Viewgraphs on propulsion needs for lunar/Mars missions are presented. Topics covered include: lunar mission profile; lunar transfer vehicle/lunar excursion vehicle; launch vehicles for lunar missions; lunar outpost; Mars transfer operations; Mars mission vehicle in low earth orbit (LEO); mission vehicle commonality; mass comparison for reference missions; advanced propulsion; propulsion option size comparison; Mars transfer vehicle (MTV) propulsion option weights for mission favorable opportunities; propulsion options comparison; Mars transportation architecture options; tanker options for fully reusable systems; NTR 900 Isp staged tanks and engines; fully reusable cryogenic aerobraked system; NEP operated from high orbit; and nuclear safe orbit considerations.
The theory of radiative transfer in the lunar surface
Limitations of theory of radiative transfer in lunar surface, and modified version for prescribing behavior of infrared radiation recorded on earth
Earth Orbit Raise Design for the ARTEMIS Mission
ARTEMIS is a mission to send two spacecraft from Earth orbit to libration orbits around the Moon Lagrange points and then into lunar orbit. Lunar flybys were used early in the mission to send the spacecraft into low-energy lunar transfers which were designed libration orbits for minimal deltaV. ARTEMIS began by raising the Earth orbits of each spacecraft to achieve the planned lunar flybys. Spacecraft conguration and operation constraints made the Earth orbit raise phase of the mission a signicant mission design challenge by itself. This paper describes the process used to and trajectories that achieved mission goals and the resulting series of Earth orbits that culminated in successful lunar flybys.