Search NASA⌕ Search

SEARCH · Search NASA

Results for “machine learning potential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Modeling phase transformations in Mn-rich disordered rocksalt cathodes with machine-learning interatomic potentials

Mn-rich disordered rocksalt (DRX) cathode materials exhibit a phase transformation from a disordered to a partially disordered spinel-like structure (δ-phase) during electrochemical cycling. Here, in this computational study, we use charge-informed molecular dynamics with a fine-tuned CHGNet foundation potential to investigate the phase transformation in LixMn 0.8 Ti 0.1 O 1.9 F 0.1 . Our results indicate that transition metal migration occurs and reorders to form the spinel-like ordering in an FCC anion framework. The transformed structure contains a higher concentration of nontransition metal (0-TM) face-sharing channels, which are known to improve Li transport kinetics. Analysis of the Mn valence distribution suggests that the appearance of tetrahedral Mn 2+ is a consequence of spinel-like ordering, rather than the trigger for cation migration as previously suggested. Calculated equilibrium intercalation voltage profiles demonstrate that the δ-phase, unlike the ordered spinel, exhibits solid-solution signatures at low voltage. A higher Li capacity is obtained than in the DRX phase. This study provides atomic insights into solid-state phase transformation and its relation to experimental electrochemistry, highlighting the potential of machine-learning interatomic potentials for understanding complex oxide materials.

Zhong, Peichen [University of California, Berkeley↗
DOE OSTI2025

MS25: Materials Science-Focused Benchmark Data Set for Machine Learning Interatomic Potentials

Here, we present MS25, a benchmark data set for evaluating machine learning interatomic potentials (MLIPs) across diverse materials-relevant systems including MgO surfaces, liquid water, zeolites, a catalytic Pt surface reaction, high-entropy alloys (HEAs), and disordered Zr-oxides. Five MLIP architectures (MACE, NequIP, Allegro, MTP, and Torch-ANI) are trained and tested, focusing not only on traditional metrics (energies, forces, and stresses) but also explicitly validating derived physical observables such as lattice constants, volumes, and reaction barriers. We find that most models reach comparable accuracy on standard error metrics across the simple systems, although equivariant MLIPs offer 1.5–2× improvements over nonequivariant MLIPs in energy and force error for structurally complex or compositionally disordered environments such as HEAs and Zr–O systems. Our analysis highlights that low errors in energy and force predictions do not guarantee reliable observables, emphasizing the necessity of explicit validation. We demonstrate limitations in cross-framework transferability, as models trained on one zeolite framework (CHA) fail to reliably generalize to predictions of structurally distinct frameworks (e.g., MFI). Size-extensive tests show some dependence on system size for MgO, resulting from forced periodicity. The HEA and Zr–O data sets are identified as challenging tests for future benchmarks and MLIP model architecture developments as they show significant differentiation in error between MLIP architectures and are still relatively difficult at 1000 training images. Moving forward, we recommend that benchmarking efforts shift their focus from marginal accuracy improvements in energy and force errors toward identifying and understanding model failure modes, rigorously assessing transferability, and evaluating how their errors affect observable predictions. For researchers looking to choose an MLIP architecture, we suggest selecting equivariant MLIP architectures if the complexity of the system is a challenge. For simple materials problems, auxiliary features such as integration with molecular dynamics engines, trade-offs between computational data set generation cost vs MLIP inference speed, and framework integration may play a more important decision factor than small differences in error metrics that are unlikely to matter for production-level research.

chemical structure↗
DOE OSTI2025

Uncertainty quantification for misspecified machine learned interatomic potentials

The use of high-dimensional regression techniques from machine learning has significantly improved the quantitative accuracy of interatomic potentials. Atomic simulations can now plausibly target quantitative predictions in a variety of settings, which has brought renewed interest in robust means to quantify uncertainties. In many practical settings where model complexity is constrained (e.g., due to performance considerations), misspecification — the inability of any one choice of model parameters to exactly match all training data — is a key contributor to errors that is often disregarded. Here, we employ a recent misspecification-aware regression technique to quantify parameter uncertainties, which is then propagated to a broad range of phase and defect properties in tungsten. The propagation is performed through both brute-force resampling and implicit Taylor expansion. The propagated misspecification uncertainties robustly quantify and bound errors on a broad range of material properties. We demonstrate application to recent foundational machine learning interatomic potentials, accurately predicting and bounding errors in MACE-MPA-0 energy predictions across the diverse materials project database.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Development of Machine-Learned Interatomic Potentials to Predict Structure, Transport, and Reactivity in Platinum-Based Fuel Cells

Machine-learned interatomic potentials (MLIPs) have rapidly progressed in accuracy, speed, and data efficiency in recent years. However, training robust MLIPs in multicomponent systems remains a challenge. In this work, we train an MLIP to describe hydrated Nafion ionomers and platinum catalysts, which are important components of fuel cells, by constructing a diverse training set to describe the bulk polymer and interfacial catalyst–polymer interactions well. We use our trained MLIP to study the properties of the platinum–Nafion system, including polymer structure, proton mobility in a bulk Nafion polymer and near a platinum-Nafion interface, and reactions near and far from the interface, finding excellent results for structure and reactions contained within our training set. Transport seems to be well described, with both vehicular transport and Grotthuss hopping captured, although converged calculations of diffusivities were not computed because they require calculations of tens of nanoseconds that are challenging with current state-of-the-art MLIPs. The combined insights that this model provides can be leveraged to optimize fuel cell performance, and the approach can be applied to other chemical processes and devices where structure, transport, and reactivity all contribute to the overall observed performance.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2026

Enabling accurate chemical modeling of shocked energetic materials using a machine learning interatomic potential

Understanding the complex chemistry of organic materials under dynamic compression is important for many applications, but it is challenging due to the large number of reactions occurring at various time scales. Here, in this study, we develop a machine learning potential based on Chebyshev polynomials to study the insensitive energetic material 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) under detonation. We discuss a strategy for constructing diverse training data needed to capture the complex chemistry of TATB. Our potential demonstrates strong transferability across a wide range of thermodynamic conditions and other explosives, enabling accurate and reliable chemical modeling of organic materials under extreme conditions. The efficiency of our approach allows for simulations over several nanoseconds and for large system sizes, providing detailed insights into the chemistry of shocked TATB. The model accurately reproduces experimental Hugoniot equation of state data, and our simulations reveal the rapid formation of nitrogen-rich carbon clusters following shock. The methods and datasets developed here offer a robust framework for accurate chemical modeling of other shocked organic energetic materials.

Chemistry↗
DOE OSTI2025

Application-specific machine-learned interatomic potentials: exploring the trade-off between DFT convergence, MLIP expressivity, and computational cost

Machine-learned interatomic potentials (MLIPs) are revolutionizing computational materials science and chemistry by offering an efficient alternative to ab initio molecular dynamics (MD) simulations. However, fitting high-quality MLIPs remains a challenging, time-consuming, and computationally intensive task where numerous trade-offs have to be considered, e.g., How much and what kind of atomic configurations should be included in the training set? Which level of ab initio convergence should be used to generate the training set? Which loss function should be used for fitting the MLIP? Which machine learning architecture should be used to train the MLIP? The answers to these questions significantly impact both the computational cost of MLIP training and the accuracy and computational cost of subsequent MLIP MD simulations. In this study, we use a configurationally diverse beryllium dataset and quadratic spectral neighbor analysis potential. We demonstrate that joint optimization of energy versus force weights, training set selection strategies, and convergence settings of the ab initio reference simulations, as well as model complexity can lead to a significant reduction in the overall computational cost associated with training and evaluating MLIPs. This opens the door to computationally efficient generation of high-quality MLIPs for a range of applications which demand different accuracy versus training and evaluation cost trade-offs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Benchmarking universal machine learning interatomic potentials for rapid analysis of inelastic neutron scattering data

The accurate calculation of phonons and vibrational spectra remains a significant challenge, requiring highly precise evaluations of interatomic forces. Traditional methods based on the quantum description of the electronic structure, while widely used, are computationally expensive and demand substantial expertise. Emerging universal machine learning interatomic potentials (uMLIPs) offer a transformative alternative by employing pre-trained neural network surrogates to predict interatomic forces directly from atomic coordinates. This approach dramatically reduces computation time and minimizes the need for technical knowledge. In this paper, we produce a phonon database comprising nearly 5000 inorganic crystals to benchmark the performance of several leading uMLIPs. We further assess these models in real-world applications by using them to analyze experimental inelastic neutron scattering data collected on a variety of materials. Through detailed comparisons, we identify the strengths and limitations of these uMLIPs, providing insights into their accuracy and suitability for fast calculations of phonons and related properties, as well as the potential for real-time interpretation of neutron scattering spectra. Our findings highlight how the rapid advancement of AI in science is revolutionizing experimental research and data analysis.

inelastic neutron scattering↗
DOE OSTI2024

Integrating machine learning interatomic potentials with hybrid reverse Monte Carlo structure refinements in RMCProfile

Structure refinement with reverse Monte Carlo (RMC) is a powerful tool for interpreting experimental diffraction data. To ensure that the under-constrained RMC algorithm yields reasonable results, the hybrid RMC approach applies interatomic potentials to obtain solutions that are both physically sensible and in agreement with experiment. To expand the range of materials that can be studied with hybrid RMC, we have implemented a new interatomic potential constraint in RMCProfile that grants flexibility to apply potentials supported by the Large-scale Atomic/Molecular Massively Parallel Simulator ( LAMMPS ) molecular dynamics code. This includes machine learning interatomic potentials, which provide a pathway to applying hybrid RMC to materials without currently available interatomic potentials. To this end, we present a methodology to use RMC to train machine learning interatomic potentials for hybrid RMC applications.

Cuillier, Paul↗
DOE OSTI2025

Developing reliable machine learning interatomic potential for Fe–Cr–Ni austenitic alloys

Gaining atomistic understanding of mechanical behavior of heat-resistant structural materials such as Fe–Cr–Ni-based alloys requires an approach with an accuracy close to density functional theory (DFT) that considers the intrinsic properties of the bulk lattice and important defects such as stacking faults, grain boundaries, and surfaces. This work aims to develop reliable machine learning interatomic potential (MLIAP) at cross-scale for Fe–Cr–Ni ternary alloys with a focus on the face-centered-cubic (fcc) solid solution structure. Leveraging the advantages of moment tensor potentials, which typically necessitate a relatively small training dataset and enable rapid calculations using the large-scale atomic/molecular massively parallel simulator package, we ensure the stability and accuracy of the trained potentials. Important defects such as stacking faults, grain boundaries, and surfaces for wide-range compositions are investigated. Structural, thermal, elastic, and defect properties are determined from molecular dynamics simulations comprising several thousand atoms, generated via canonical Monte Carlo simulations guided by the trained potential. The trained potential allows efficient atomic simulations of structural, thermal, and mechanical properties of fcc Fe–Cr–Ni solid solution alloys as a function of composition and temperature. Therefore, the MLIAP approach represents a major advancement from DFT calculations that are limited to small simulation sizes and traditional molecular dynamics simulations using relatively low accuracy potentials. Furthermore, this work outlines a practical foundation for further investigating the structural evolution and mechanical behavior of austenitic stainless steel and nickel-based alloys in a wide array of applications in extreme environments.

Crystal structure↗
DOE OSTI2024

Unifying Quantum Materials Modeling and Experiments: The Role of Machine Learning Interatomic Potentials

Computational experiments have emerged as a powerful complement to traditional experiments in the design of new materials. The development of machine learning (ML) and deep learning techniques, combined with database construction and data mining, has significantly enhanced traditional quantum mechanical methods. This synergy enables the rapid development of structure-property relationships. In this talk, I will discuss our recent efforts in applying Machine Learning Interatomic Potentials (MLIAPs) to accelerate materials modeling across various material classes and challenging applications where traditional methods fall short. First, I will highlight the success of MLIAPs in accurately modeling the melting behavior of complex materials. Our results demonstrate high fidelity with experimental observations and also with calculated reference melting temperatures. In the second application, I will discuss how MLIAPs are trained and applied to elucidate the interplay between segregation tendencies and surface reconstructions in CuNi alloys under oxidizing conditions. A key factor in the success of these MLIAP applications is the design of minimalistic yet flexible datasets along with a computational framework for training MLIAPs.

Saidi, Wissam↗
DOE OSTI2025

High temperature melting of dense molecular hydrogen from machine-learning interatomic potentials trained on quantum Monte Carlo

We present results and discuss methods for computing the melting temperature of dense molecular hydrogen using a machine learned model trained on quantum Monte Carlo data. In this newly trained model, we emphasize the importance of accurate total energies in the training. We integrate a two phase method for estimating the melting temperature with estimates from the Clausius–Clapeyron relation to provide a more accurate melting curve from the model. We make detailed predictions of the melting temperature, solid and liquid volumes, latent heat, and internal energy from 50 to 180 GPa for both classical hydrogen and quantum hydrogen. At pressures of roughly 173 GPa and 1635 K, we observe molecular dissociation in the liquid phase. Here, we compare with previous simulations and experimental measurements.

08 HYDROGEN↗
DOE OSTI2026

Maximizing machine learning interatomic potential transferability for the discovery of the novel stellated octadecagon Bi18-Pt24 cage structure

Achieving true transferability remains the central challenge for Machine Learning Interatomic Potentials (ML-IAPs) in modeling complex bimetallic nanoclusters across their vast potential energy surfaces. We systematically investigate data selection strategies to optimize the Chebyshev Interaction Model for Efficient Simulation (ChIMES) potential for the Bi-Pt nanoclusters by comparing three innovative sampling methods: Principal Component Analysis (PCA)/k-means (structural diversity), t-distributedStochasticNeighborEmbedding (t-SNE)/k-means (force-space diversity), and hierarchical clustering. Quantitatively, the PCA/k-means strategy proved most effective for global accuracy, yielding the lowest force errors and achieving energy root mean square errors (RMSE) values competitive with Density Functional Theory (DFT), demonstrating excellent accuracy (19.16meV/atom). Structural validation on 34 unique DFT-optimized isomers further confirmed the potential’s high fidelity, with the best model PCA/k-means reproducing structures with an average root mean square deviation (RMSD) of 0.10 Å. However, the t-SNE methods, by maximizing diversity in the force space, demonstrated superior extrapolative power, leading to the more precise prediction of a novel stellated octadecagon Bi18⁢Pt24 cage structure, demonstrating the potential for exploring previously unseen morphologies. Our results establish a clear methodology for strategic data sampling that successfully maximizes ML-IAP transferability, providing an accurate and computationally efficient tool that accelerates the theoretical discovery of complex bimetallic architectures.

Vangheluwe, Raphaël [Université Paris-Saclay, CNRS↗
DOE OSTI2025

Toward machine learning interatomic potentials for modeling uranium mononitride

Uranium mononitride (UN) is a promising accident-tolerant fuel because of its high fissile density and high thermal conductivity. In this study, we developed the first machine learning interatomic potentials for reliable atomic-scale modeling of UN at finite temperatures. We constructed a training set using density functional theory (DFT) calculations that was enriched through an active learning procedure, and two neural network potentials were generated. Both potentials successfully reproduce key thermophysical properties of interest, such as temperature-dependent lattice parameter, specific heat capacity, and bulk modulus. We also evaluated the energy of stoichiometric defect reactions and defect migration barriers and found close agreement with DFT predictions, demonstrating that our potentials can be used for modeling defects in UN. Additional tests provide evidence that our potentials are reliable for simulating diffusion, noble gas impurities, and radiation damage.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Python Library for Monte Carlo Simulations with Ab Initio and Machine-Learned Interatomic Potentials

There is a growing need in the simulation community for software that provides a transparent, reproducible, usable, and extensible (TRUE) Monte Carlo (MC) simulation framework employing energies from ab initio methods and machine-learning interatomic potentials (MLIPs). We introduce a Python library (ASE-MC) that adds Monte Carlo functionality to the Atomic Simulation Environment (ASE) package. Now, we can combine the powerful tools used to build systems and perform ab initio and MLIP in ASE with MC simulation algorithms to sample the configurational space with a concise Python script. After presenting the design philosophy, we demonstrate the flexibility of our approach using selected examples. These example simulations include liquid water described with a message-passing MLIP in the canonical and isothermal–isobaric ensembles, sampling the characteristic dihedral angle of biphenyl and comparing an MLIP to first-principles calculations, and a grand canonical Monte Carlo simulation of ammonia adsorption on Pt(111). These examples showcase the main features of the software, which include flexibility in the choice of ab initio or MLIP engine, ab initio or MLIP grand canonical MC with cavity bias insertions and deletions, the ability to add custom MC moves to the move set, and how users can condense complex MC workflows into a single Python script. Finally, this library serves as a framework for reproducible Monte Carlo simulations, facilitating easy reproduction of the work and application to new systems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Developing Machine Learning Interatomic Potential for Fe-Cr-Ni Alloys

Accurate prediction of creep and fatigue behavior of stainless steel at elevated temperatures in hydrogen environment requires fundamental understanding of alloy-hydrogen interaction at cross-scale including bulk lattice and key defects such as vacancies, grain boundaries, surfaces, stacking faults, dislocations, and precipitates. This project aims to predict creep behavior of 347H stainless steel with H using machine learning interatomic potentials based on first-principles density functional theory simulations. The Moment Tensor Potentials platform is adopted for this work since it demonstrates a fine balance between model accuracy and computational efficiency. The potential is well trained based on large amount of high-fidelity density functional theory calculations. The validation is carried out by comparing various important properties including short range order, coefficient of thermal expansion, elastic properties, stacking fault energy, grain boundary energy, and surface energy. This work lays the foundation for reliable atomistic simulation of high temperature hydrogen attack of stainless steel.

density functional theory (DFT)↗
DOE OSTI2025

The transformative capability of quantum-accurate machine learning interatomic potentials

Many materials’ properties and phase boundaries are generally not well known under extreme pressure and temperature conditions. Here, this is a consequence of the scarcity of experimental information and the difficulty of extrapolating approximations to the atomic interactions in such conditions. Nguyen-Cong and colleagues, in their publication (J.Phys.Chem.Lett. 15, 1152 (2024)) [1], achieved an impressive result using a SNAP (Spectral Neighbor Analysis Potential), an interatomic potential for carbon obtained by machine learning techniques. In a way, their contribution closes a full circle of research that spanned more than three decades.

Tedesco, Alfredo Correa [Lawrence Livermore Nation↗
DOE OSTI2026

Augmenting Molecular Graphs with Geometries via Machine Learning Interatomic Potentials

Accurate molecular property predictions require 3D geometries, which are typically obtained using expensive methods such as density functional theory (DFT). Here, we attempt to obtain molecular geometries by relying solely on machine learning interatomic potential (MLIP) models. To this end, we first curate a large-scale molecular relaxation dataset comprising 3.5 million molecules and 300 million snapshots. Then MLIP pre-trained models are trained with supervised learning to predict energy and forces given 3D molecular structures. Once trained, we show that the pre-trained models can be used in different ways to obtain geometries either explicitly or implicitly. First, it can be used to obtain approximate low-energy 3D geometries via geometry optimization. While these geometries do not consistently reach DFT-level chemical accuracy or convergence, they can still improve downstream performance compared to non-relaxed structures. To mitigate potential biases and enhance downstream predictions, we introduce geometry fine-tuning based on the relaxed 3D geometries. Second, the pre-trained models can be directly fine-tuned for property prediction when ground truth 3D geometries are available. Our results demonstrate that MLIP pre-trained models trained on relaxation data can learn transferable molecular representations to improve downstream molecular property prediction and can provide practically valuable but approximate molecular geometries that benefit property predictions. Our code is publicly available at: https://github.com/divelab/AIRS/.

Fu, Cong [Texas A & M Univ., College Station, TX (↗
DOE OSTI2026

Development of a deep potential model for F and CF 2 etching of Si and SiO 2

An understanding of plasma-surface interactions at increasingly smaller scales is invaluable for the development of novel technologies and processing techniques. Molecular dynamics (MD) simulations can provide insights into atomic-scale interactions, though they are restricted by the availability of interatomic potentials. Machine learning methods, such as Deep Potential Molecular Dynamics (DeepMD), provide a systematic framework for the development of accurate and flexible ab initio-based models. In this work, we develop DeepMD models for the ion-enhanced etching of Si and SiO 2 by F and CF 2 radicals. We employ an active learning process to expand the data set on which the model is trained and demonstrate its effect on the model accuracy. The DeepMD results are compared to data from classical MD simulations and experiments. Physical sputtering yields of SiO 2 by Ar + ions show good agreement with previous simulation results using conventional interatomic potentials, though the predicted depth profiles are different. Etching yields are calculated as a function of ion energy and neutral to ion flux ratio for the Ar + ion-enhanced etching of SiO 2 and Si by F atoms, as well as for etching of SiO 2 by CF 2 radicals, showing reasonable agreement with experimental data. Finally, an ion-enhanced surface kinetic model is fitted to the DeepMD etch yields, and the fitted parameters are compared to quantities computed directly from DeepMD simulations. This study illustrates how molecular dynamics simulations using machine learning potentials can provide an accurate model of etching processes relevant to device manufacturing.

Kounis-Melas, Andreas [Princeton Univ., NJ (United↗