Search NASA⌕ Search

SEARCH · Search NASA

Results for “magneto-optical properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Fabrication of single-crystalline YFeO3 films with large antiferromagnetic domains

The antiferromagnetic orthoferrite YFeO3 possesses fascinating magnetic properties for spintronics, such as terahertz spin dynamics, ultrafast domain wall motion, and long magnon decay length. YFeO3 belongs to a special family of antiferromagnets that show an unusually strong non-trivial Kerr response due to its weak ferromagnetism. The highly stable antiferromagnetic domains without any spontaneous spin rotation transitions below the 645 K Néel temperature may be useful for nanoscale device applications. We report the successful fabrication of high-quality twinning-free (110)-oriented YFeO3 films by pulsed laser deposition. Detailed structural and magnetic characterization revealed that the crystal structure and magnetic properties of the YFeO3 films are comparable to bulk single crystals. We show that the spin rotation under high magnetic fields follows the two-sublattice approximation model. The film surface is atomically flat with step-terrace surface morphology. A longitudinal magneto-optic Kerr (MOKE) rotation of 10 mdeg was observed at room temperature, which is consistent with earlier reports on bulk single crystals. The in-plane anisotropy of the Kerr response corresponds to the obtained magnetic anisotropy from the SQUID measurement. The large MOKE signal enables the imaging of antiferromagnetic domains and their reversal. The domain size was found to be larger than 100 μm. These high-quality YFeO3 thin films facilitate the fabrication of antiferromagnetic spintronic devices and provide a convenient platform for studying various spin-related phenomena in thin films and at interfaces.

Physics↗
NASA NTRS1992

Stimulated electronic transition concept for an erasable optical memory

A new concept for an erasable optical memory is demonstrated using stimulated electronic transition (SET). Large bandgap semiconductors are suitable materials for the SET medium. The properties of MgS:Eu,Sm and SrS:Eu,Sm as possible media for the SET process are investigated. Quantum storage is achieved in the form of charges in deep levels in the medium and stimulated radiative recombination is used as the reading process. Unlike magneto-optic (M-O) and phase change (PC) processes, optical writing, reading and erasing are achieved without localized heating. The SET process will have an inherently faster data transfer rate and a higher storage density, and the medium will be more durable than the M-O and PC media. A possible application of the SET process in neural networks is also discussed.

Albin, Sacharia↗
DOE OSTI2024

Transient magnetoelastic coupling in CrSBr

Recent research has revealed remarkable properties of the two-dimensional (2D) van der Waals layered crystal CrSBr, which is both a semiconductor and an A-type antiferromagnet. Here, in this study, we show the role of strong magnetoelastic coupling in the generation and propagation of coherent magnons in CrSBr. Time- and spatially resolved magneto-optical Kerr effect microscopy reveals two time-varying transient strain fields induced by out-of-plane transverse and in-plane longitudinal lattice displacements. These transient strain fields launch coherent wavepackets of magnons, optical and acoustic, at 24.6 ± 0.8 and 33.4 ± 0.5GHz, respectively. These findings suggest mechanisms for controlling and manipulating coherent magnons from distinct magnetoelastic couplings in this 2D van der Waals magnetic semiconductor.

36 MATERIALS SCIENCE↗
DOE OSTI2024

M PX 3 van der Waals magnets under pressure ( M = Mn, Ni, V, Fe, Co, Cd; X = S, Se)

van der Waals antiferromagnets with chemical formula MPX 3 (M = V, Mn, Fe, Co, Ni, Cd; X = S, Se) are superb platforms for exploring the fundamental properties of complex chalcogenides, revealing their structure-property relations and unraveling the physics of confinement. Pressure is extremely effective as an external stimulus, able to tune properties and drive new states of matter. In this review, we summarize experimental and theoretical progress to date with special emphasis on the structural, magnetic, and optical properties of the MPX 3 family of materials. Under compression, these compounds host inter-layer sliding and insulator-to-metal transitions accompanied by dramatic volume reduction and spin state collapse, piezochromism, possible polar metal and orbital Mott phases, as well as superconductivity. Some responses are already providing the basis for spintronic, magneto-optic, and thermoelectric devices. We propose that strain may drive similar functionality in these materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1985

The effect of line damping, magneto-optics and parasitic light on the derivation of sunspot vector magnetic fields

The least square fitting of Stokes observations of sunspots using a Milne-Eddington-Unno model appears to lead, in many circumstances, to various inconsistencies such as anomalously large doppler widths and, hence, small magnetic fields which are significantly below those inferred solely from the Zeeman splitting in the intensity profile. It is found that the introduction of additional physics into the model such as the inclusion of damping wings and magneto-optic birefrigence significantly improves the fit to Stokes parameters. Model fits excluding the intensity profile, i.e., of both magnitude as well as spectral shape of the polarization parameters alone, suggest that parasitic light in the intensity profile may also be a source of inconsistencies. The consequences of the physical changes on the vector properties of the field derived from the Fe I lambda 6173 line for the 17 November 1975 spot as well as on the thermodynamic state are discussed. A Doppler width delta lambda (D) - 25mA is bound to be consistent with a low spot temperature and microturbulence, and a damping constant of a = 0.2.

Skumanich, A.↗
DOE OSTI2023

Magneto-optical measurement of magnetic field and electrical current on a short pulse high energy pulsed power accelerator

We describe a direct magneto-optical approach to measuring the magnetic field driven by a narrow pulse width (<10 ns), 20 kA electrical current flow in the transmission line of a high energy pulsed power accelerator. The magnetic field and electrical current are among the most important operating parameters in a pulsed power accelerator and are critical to understanding the properties of the radiation output. However, accurately measuring these fields and electrical currents using conventional pulsed power diagnostics is difficult due to the strength of ionizing radiation and electromagnetic interference. Our approach uses a fiber coupled laser beam with a rare earth element sensing crystal sensor that is highly resistant to electromagnetic interference and does not require external calibration. Here, we focus on device theory, operating parameters, results from an experiment on a high energy pulsed power accelerator, and comparison to a conventional electrical current shunt sensor.

42 ENGINEERING↗
NASA NTRS1991

Sources of noise in magneto-optical readout

The various sources of noise which are often encountered in magneto-optical readout systems are analyzed. Although the focus is on magneto-optics, most sources of noise are common among the various optical recording systems and one can easily adapt the results to other media and systems. A description of the magneto-optical readout system under consideration is given, and the standard methods and the relevant terminology of signal and noise measurement are described. The characteristics of thermal noise, which originates in the electronic circuitry of the readout system, are described. The most fundamental of all sources of noise, the shot noise, is considered, and a detailed account of its statistical properties is given. Shot noise, which is due to random fluctuations in photon arrival times, is an ever-present noise in optical detection. Since the performance of magneto-optical recording devices in use today is approaching the limit imposed by the shot noise, it is important that the reader have a good grasp of this particular source of noise. A model for the laser noise is described, and measurement results which yield numerical values for the strength of the laser power fluctuations are presented. Spatial variations of the disk reflectivity and random depolarization phenomena also contribute to the overall level of noise in readout; these and related issues are treated. Numerical simulation results describing some of the more frequently encountered sources of noise which accompany the recorded waveform itself, namely, jitter noise and signal-amplitude fluctuation noise are presented.

Mansuripur, M.↗
DOE OSTI2026

Magneto-optical study of Nb thin films for superconducting qubits

Among the recognized sources of decoherence in superconducting qubits, the spatial inhomogeneity of the superconducting state and the possible presence of magnetic-flux vortices remain comparatively underexplored. Niobium is commonly used as a structural material in transmon qubits that host Josephson junctions, and excess dissipation anywhere in the transmon can become a bottleneck that limits overall quantum performance. The metal/substrate interfacial layer may simultaneously host pair-breaking loss channels (e.g., two-level systems, TLS) and control thermal transport, thereby affecting dissipation and temperature stability. Here, we use quantitative magneto-optical imaging of the magnetic-flux distribution to characterize the homogeneity of the superconducting state and the critical current density, $j_{c}$, in niobium films fabricated under different sputtering conditions. The imaging reveals distinct flux-penetration regimes, ranging from a nearly ideal Bean critical state to strongly nonuniform thermo-magnetic dendritic avalanches. By fitting the measured magnetic-induction profiles, we extract $j_{c}$ and correlate it with film physical properties and with measured qubit internal quality factors. Our results indicate that the Nb/Si interlayer can be a significant contributor to decoherence and should be considered an important factor that must be optimized.

Datta, Amlan [Ames Lab; Iowa State U.]↗
DOE OSTI2026

Magneto-optical study of Nb thin films for superconducting qubits

Abstract Among the recognized sources of decoherence in superconducting qubits, the spatial inhomogeneity of the superconducting state and the possible presence of magnetic-flux vortices remain comparatively underexplored. Niobium is commonly used as a structural material in transmon qubits that host Josephson junctions, and excess dissipation anywhere in the transmon can become a bottleneck that limits overall quantum performance. The metal/substrate interfacial layer may simultaneously host pair-breaking loss channels (e.g. two-level systems) and control thermal transport, thereby affecting dissipation and temperature stability. Here, we use quantitative magneto-optical imaging of the magnetic-flux distribution to characterize the homogeneity of the superconducting state and the critical current density, j c , in niobium films fabricated under different sputtering conditions. The imaging reveals distinct flux-penetration regimes, ranging from a nearly ideal Bean critical state to strongly nonuniform thermo-magnetic dendritic avalanches. By fitting the measured magnetic-induction profiles, we extract j c and try to correlate it with film physical properties and with measured qubit internal quality factors. Our results indicate that the Nb/Si interlayer can be a significant contributor to decoherence and should be considered an important factor that must be optimized.

Datta, Amlan [Ames National Laboratory; Iowa State↗
DOE OSTI2023

Parameter-free treatment of a layered correlated van der Waals magnet: CrPS 4

The electronic and magnetic structure of CrPS 4 , a two-dimensional (2D) magnetic semiconductor is examined by employing the SCAN meta-GGA density functional. We find the resulting magnetic moment and band gap are in excellent agreement with experiment. From the bulk magnetic configurations, we confirm the experimentally observed A-type antiferromagnetic (A-AFM) ordered ground state with a magnetic moment of 2.78 µ B per chromium atom and band gap of 1.34 eV. To gain insight into the evolution of the ground state with layers, the total energy of each magnetic configuration is calculated for a variety of thicknesses. Monolayer CrPS 4 is predicted to be a ferromagnetic insulator with a band gap of 1.37 eV, and A-AFM for bilayer and trilayer, with band gaps of 1.35 and 1.30 eV, respectively. The electronic structure is reported for the single-, two-, and three-layer and bulk CrPS 4 . Finally, we explore the optical properties of the 2D structure and report the dielectric tensor components and Kerr parameters for the monolayer.

2-dimensional systems↗
DOE OSTI2023

Tuning the Curie temperature of a two-dimensional magnet/topological insulator heterostructure to above room temperature by epitaxial growth

Heterostructures of two-dimensional (2D) van der Waals (vdW) magnets and topological insulators (TI) are of substantial interest as candidate materials for efficient spin-torque switching, quantum anomalous Hall effect, and chiral spin textures. However, since many of the vdW magnets have Curie temperatures below room temperature, we want to understand how materials can be modified to stabilize their magnetic ordering to higher temperatures. In this work, we utilize molecular beam epitaxy to systematically tune the Curie temperature (T C ) in thin film Fe 3 GeTe 2 /Bi 2 Te 3 from bulklike values (~220 K) to above room temperature by increasing the growth temperature from 300°C to 375°C. For samples grown at 375°C, cross-sectional scanning transmission electron microscopy (STEM) reveals the spontaneous formation of different Fe m Ge n Te 2 compositions (e.g., Fe 5 Ge 2 Te 2 and Fe 7 Ge 6 Te 2 ) as well as intercalation in the vdW gaps, which are possible origins of the enhanced Curie temperature. Furthermore, this observation paves the way for developing various Fe m Ge n Te 2 /TI heterostructures with novel properties.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Two-Dimensional Ferroelectric Altermagnets: From Model to Material Realization

Multiferroic altermagnets offer new opportunities for magnetoelectric coupling and electrically tunable spintronics. However, due to intrinsic symmetry conflicts between altermagnetism and ferroelectricity, achieving their coexistence, known as ferroelectric altermagnets (FEAM), remains an outstanding challenge, especially in two-dimensional (2D) systems. Here, we propose a universal, symmetry-based design principle for 2D FEAM, supported by tight-binding models and first-principles calculations. We show that lattice distortions can break spin equivalence and introduce the necessary rotation-related symmetry, enabling altermagnetism with electrically reversible spin splitting. Guided by this framework, we identify a family of 2D vanadium oxyhalides and sulfide halides as promising FEAM candidates. In these compounds, pseudo Jahn-Teller distortions and Peierls-like dimerization cooperatively establish the required symmetry conditions. Here, we further propose the magneto-optical Kerr effect as an experimental probe to confirm FEAM and its electric spin reversal. Furthermore, our findings provide a practical framework for 2D FEAM and advancing electrically controlled spintronic devices.

2D materials↗
DOE OSTI2024

Exploring the relationship between deposition method, microstructure, and performance of Nb/Si-based superconducting coplanar waveguide resonators

Superconducting quantum circuits (SQC) are one of the most promising hardware platforms for quantum computing, yet their performance is currently limited by the presence of various structural defects inside the circuit's structure. Despite impressive progress in the past decade, a precise understanding of the origin of these defects from various fabrication processes and their impact on coherence is still lacking. Here, in this study, we performed a comprehensive investigation on the microstructure, superconductivity, and resonator quality factor of Nb films deposited by high-power impulse magnetron sputtering (HiPIMS) and direct current (DC) magnetron sputtering. A suite of characterization techniques, including electron microscopy with spectroscopy, secondary ion mass spectrometry, magneto-optical microscopy, and pump-probe reflectivity spectroscopy is used. We reveal that niobium (Nb) resonators fabricated using HiPIMS exhibit a smaller average grain size, thicker surface oxide with larger thickness variations (rougher surface), and a thicker amorphous Nb/Si interface layer compared to samples deposited by DC sputtering. We identified that the amorphous Nb oxides (mainly located at the Nb surface and along the grain boundaries) and Nb-Si amorphous layers (at the Nb/Si interface) are major and potential sources of two-level system (TLS), while off-stochiometric oxides and suboxides of Nb close to the surface, crystalline defects (i.e., dislocations at grain boundary, point defects introduced during deposition) are main contributors of non-TLS sources. Our findings clarify the relationship between different defects and coherence loss mechanisms, highlighting the importance of material microstructure control on performance optimization in SQC.

36 MATERIALS SCIENCE↗
DOE OSTI2025

An electronic microemulsion phase emerging from a quantum crystal-to-liquid transition

Strongly interacting electronic systems often exhibit a complicated phase diagram that results from the competition between different quantum ground states. One feature of these phase diagrams is the emergence of microemulsion phases, where regions of different phases self-organize across multiple length scales. The experimental characterization of these microemulsions can pose considerable challenges, as the long-range Coulomb interaction microscopically mingles with the competing states. Here we observe the signatures of the microemulsion between an electronic Wigner crystal and an electron liquid in a MoSe 2 monolayer using cryogenic reflectance and magneto-optical spectroscopy. We find that the transition into this microemulsion state is marked by anomalies in exciton reflectance, spin susceptibility and umklapp scattering, establishing it as a distinct phase of electronic matter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Altermagnetic polar metallic phase in ultrathin epitaxially strained RuO 2 films

Altermagnetism refers to a wide class of magnetic orders featuring magnetic sublattices with opposite spins related by rotational symmetries, resulting in nontrivial spin splitting and magnetic multipoles. However, the direct observation of the altermagnetic transition remains elusive. Here, by combining theoretical analysis, electrical transport, X-ray, and optical spectroscopies, we establish a phase diagram in hybrid molecular beam epitaxy-grown RuO 2 /TiO 2 (110) films, mapping symmetries along with altermagnetic/electronic/structural phase transitions as functions of film thickness and temperature. This features an altermagnetic metallic polar phase in epitaxially strained 2 nm films, suggesting a potential link between polar metals and altermagnetic materials. Such a clear signature of a magnetic phase transition at ~500 K is observed exclusively in ultrathin strained films, unlike in bulk RuO 2 single crystals. These results highlight the power of epitaxial heterostructure engineering to induce altermagnetism in systems initially nonmagnetic, opening avenues for realizing emergent quantum phases with multifunctional properties.

RuO2 thin film↗
DOE OSTI2025

Tunable high Néel temperature and large anomalous Hall response in antiferromagnetic Weyl semimetal Mn 3 Sn 1− x Ga x thin films

Antiferromagnetic Weyl semimetals based on Mn 3 X(X = Ge, Sn, Ga) kagome compounds exhibit the same ferromagnetic-like responses, including anomalous Hall, Nernst, and magneto-optical effects, as recently discussed for altermagnets. Driven by the Berry curvature due to Weyl fermions, these materials show a disproportionately large magnitude of electromagnetic effects even in the absence of large magnetization. For applications it is crucial to realize these responses in a wide range of temperatures both below and above 300 K. While stoichiometric Mn 3 X materials do not offer optimal performance, we show that Mn 3 Sn 1−x Ga x sputtered films with a variable composition offers a tunable Néel temperature, T N ≈ 425 ± 6–500 ± 15 K, which is crucial for device applications, together with a large tunable anomalous Hall effect. Our thin film growth method enables continuous and precise control over the film composition between x = 0 and x = 1. Through a detailed magnetization and Hall transport, we establish the magnetic phase diagram for the hexagonal Mn 3 Sn 1−x Ga x . Our results reveal an enhanced T N and antichiral magnetic phase in Ga-doped Mn 3 Sn and an enhanced anomalous Hall magnitude in Sn-doped Mn 3 Ga compared to their stoichiometric undoped forms. Our work demonstrates a route to optimize the technologically relevant antiferromagnets for various applications.

Magnetic properties and materials↗
DOE OSTI2024

Tuning the interlayer coupling in La 0.7 Sr 0.3 Mn 0.95 Ru 0.05 O 3 / LaNiO 3 multilayers with perpendicular magnetic anisotropy

In ferromagnetic oxide epitaxial multilayers, magnetic properties and interlayer coupling are determined by a variety of factors. Beyond the contribution of interlayer exchange coupling, strain and interfacial effects, such as structural reconstructions or charge transfer, play significant roles, resulting in complex magnetic behavior. In this study, the interlayer coupling of ferromagnetic La 0.7 ⁢Sr 0.3⁢ Mn 0.95 ⁢Ru 0.05 ⁢O 3 (LSMRO) layers (8 nm thick) was investigated, when separated by epitaxial spacers of paramagnetic metallic LaNiO 3 (LNO), in stacks exhibiting perpendicular magnetic anisotropy. By varying the thickness of the spacer, it was found that the coupling between two LSMRO layers changes from antiferromagnetic (with a 4-unit-cell-thick LNO spacer) to ferromagnetic (with a 6-unit-cell-thick LNO spacer). For multilayers comprising five LSMRO layers and a 4-unit-cell-thick LNO spacer, the antiferromagnetic coupling was preserved. However, the effective magnetic anisotropy changed, causing the magnetization to cant more towards the in-plane direction. Further, this behavior was corroborated by X-ray magnetic circular dichroism (XMCD) investigations at the Mn and Ni L 3 edges. The XMCD results indicated that the 4-unit-cell-thick LNO spacer in the multilayer become magnetically ordered, closely following the magnetization of adjacent LSMRO layers.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Valley-Coherent Quantum Anomalous Hall State in AB-Stacked MoTe 2 / W S e 2 Bilayers

Moiré materials provide fertile ground for the correlated and topological quantum phenomena. Among them, the quantum anomalous Hall (QAH) effect, in which the Hall resistance is quantized even under zero magnetic field, is a direct manifestation of the intrinsic topological properties of a material and an appealing attribute for low-power electronics applications. The QAH effect has been observed in both graphene and transition metal dichalcogenide (TMD) moiré materials. It is thought to arise from the interaction-driven valley polarization of the narrow moiré bands. Here, we show that the newly discovered QAH state in AB-stacked MoTe 2 / W S e 2 moiré bilayers is not valley polarized but valley coherent. The layer- and helicity-resolved optical spectroscopy measurement reveals that the QAH ground state possesses spontaneous spin (valley) polarization aligned (antialigned) in two TMD layers. In addition, saturation of the out-of-plane spin polarization in both layers occurs only under high magnetic fields, supporting a canted spin texture. Our results call for a new mechanism for the QAH effect and highlight the potential of TMD moiré materials with strong electronic correlations and spin-orbit interactions for exotic topological states. Published by the American Physical Society 2024

2-dimensional systems↗