Search NASA⌕ Search

SEARCH · Search NASA

Results for “maneuver analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Charting a course to the sun: flight path control for Parker Solar Probe

The successful launch of the Parker Solar Probe (PSP) on August 12, 2018 with a Delta IV rocket and Star-48BV third stage has placed the spacecraft on a 7-year trajectory to study the Sun. The goals of PSP are to better characterize our solar environment and advance our understanding of the Sun at 9.86 Rs. A total of 42 trajectory correction maneuvers are planned. This paper documents trajectory correction maneuver analysis performed just prior to launch until just past the first solar encounter. The pre-launch analysis culminated in two final design cycles which analyzed 24 reference trajectories.

Ryne, Mark↗
NASA NTRSDate not supplied

OSIRIS-REx Earth Return & Entry: Targeting Strategy and Maneuver Performance

The OSIRIS-REx sample return capsule landed safely in the Utah desert on September 24, 2023. Starting with the departure from asteroid Bennu in May 2021 through the release of the sample capsule and its arrival at the edge of Earth’s atmosphere hours later, this phase of the mission was planned and analyzed thoroughly to optimize the probability of a successful sample return in a large number of nominal and off-nominal scenarios, all while emphasizing spacecraft safety. This paper discusses the spacecraft and sample capsule Earth return and atmospheric entry trajectory design, maneuver analysis, and flight performance, which ultimately helped lead to a successful sample return and initiation of the OSIRIS-APEX extended mission.

Daniel R. Wibben↗
NASA NTRS1973

Explicit determination of lateral-directional stability and control derivatives by simutaneous time vector analysis of two maneuvers

An extension of the time vector technique for determining stability and control derivatives from flight data is formulated. The technique provides for explicit determination of derivatives by means of simultaneous analysis of two maneuvers which differ by a dependent control input. The control derivatives for the dependent input are also explicitly determined. This extended technique is preferable to the application of the time vector method to single maneuvers in that no estimates of derivatives are required. An example illustrating the application of the technique is given.

Gilyard, G. B.↗
NASA NTRS2023

Python Based Plume Dynamics Estimation Tool (PyPDET) Rapid Plume Strike Analysis for RPOD Maneuvers in Deep Space Operations

I worked as a NASA Intern during the Summer 2023 term in the DS-00 division under the supervision of my mentor, Dr. Jonathan Pitt. Our goal was to build on our previous work from 2022 to develop a plume strike estimation tool using a prescribed physics methodology and model plume impingement effects while considering the dynamics of a rendezvous, operations, proximity, and docking (RPOD) maneuver. This tool supports previously configured CFD-DSMC calculations by allowing for rapid analysis of initial designs using a low-fidelity source flow model. Engineers can then use the high-fidelity CFD-DSMC tool to consolidate results as they work towards finalizing a design. This year’s project was focused on developing a software application that other engineers would be using in their analysis. Thus, the user’s experience was considered in the development of this application. Proper documentation, testability, and modularity of the codebase was our priority. For example, the project included auto documentation procedures to start building towards a User Manual, while also including dedicated demonstration cases for more explicit communication of functionality. Also, this project included a framework for testing the source code for future developments. Additionally, care was taken to develop the code using an Object-Oriented Programming approach. Thus, allowing for a modular extensibility of functionality in anticipation of future developments. The core work of this project was developing an algorithm that would transform the visiting vehicle and associated thruster data according to the kinematics described in the jet firing history. It would then calculate the estimated plume strikes on two of the target vehicles and write data accordingly into a VTK file. Summer work is to conclude by developing and presenting a PowerPoint slide deck at the intern exit briefing on August 11 th , 2023. Once the model for simple plume strike calculations is developed and tested there are several avenues to explore to continue development of this tool. These are also discussed in this report.

Plume Impingement↗
NASA NTRS1974

Flight-determined lag of angle-of-attack and angle-of-sideslip sensors in the YF-12A airplane from analysis of dynamic maneuvers

Magnitudes of lags in the pneumatic angle-of-attack and angle-of-sideslip sensor systems of the YF-12A airplane were determined for a variety of flight conditions by analyzing stability and control data. The three analysis techniques used are described. An apparent trend with Mach number for measurements from both of the differential-pressure sensors showed that the lag ranged from approximately 0.15 second at subsonic speed to 0.4 second at Mach 3. Because Mach number was closely related to altitude for the available flight data, the individual effects of Mach number and altitude on the lag could not be separated clearly. However, the results indicated the influence of factors other than simple pneumatic lag.

Gilyard, G. B.↗
NASA NTRS2019

Preparing General Mission Analysis Tool for Operational Maneuver Planning of the Advanced Composition Explorer Mission

The General Mission Analysis Tool (GMAT) is an open-source space mission design, analysis and trajectory optimization tool. GMAT is developed by a team of NASA, private industry, public and private contributors. GMAT is designed to model, optimize and estimate spacecraft trajectories in flight regimes ranging from low Earth orbit to lunar applications, interplanetary trajectories and other deep space missions. GMAT has also been flight qualified to support operational maneuver planning for the Advanced Composition Explorer (ACE) mission. ACE was launched in August, 1997 and is orbiting the Sun-Earth L1 libration point. The primary science objective of ACE is to study the composition of both the solar wind and the galactic cosmic rays. Operational orbit determination, maneuver operations and product generation for ACE are conducted by NASA Goddard Space Flight Center (GSFC) Flight Dynamics Facility (FDF). This paper discusses the entire engineering lifecycle and major operational certification milestones that GMAT successfully completed to obtain operational certification for the ACE mission. Operational certification milestones such as gathering of the requirements for ACE operational maneuver planning, gap analysis, test plans and procedures development, system design, pre-shadow operations, training to FDF ACE maneuver planners, shadow operations, Test Readiness Review (TRR) and finally Operational Readiness Review (ORR) are discussed. These efforts have demonstrated that GMAT is flight quality software ready to support ACE mission operations in the FDF.

mission design↗
NASA NTRS1961

Applications of Power Spectral Analysis Methods to Maneuver Loads Obtained on Jet Fighter Airplanes During Service Operations

Power spectral densities of normal load factor have been obtained for two service operational training flights of a Republic F-84G airplane and three service operational training flights of a North American F-86A airplane in order to indicate the load-factor frequency content and possible uses of power spectral methods in analyzing maneuver load data. It was determined that the maneuvering load-factor time histories appeared to be described by a truncated normal distribution. The power spectral densities obtained were relatively level at frequencies below 0.03 cycle per second and varied inversely with approximately the cube of the frequency at the higher frequencies. In general, the frequency content was very low above 0.2 cycle per second. The load-factor peak distributions were estimated fairly well from the spectrum analysis. In addition, peak load data obtained during service operations of fighter-type airplanes with flight time totaling about 24,000 hours were examined and appeared to agree reasonably well with the type of equations obtained from spectrum peak-load distributions.

Mayer, John P.↗
NASA NTRS1977

The application of integral performance criteria to the analysis of discrete maneuvers in a driving simulator

The influence of vehicle transient response characteristics on driver-vehicle performance in discrete maneuvers as measured by integral performance criteria was investigated. A group of eight ordinary drivers was presented with a series of eight vehicle transfer function configurations in a driving simulator. Performance in two discrete maneuvers was analyzed by means of integral performance criteria. Results are presented.

Repa, B. S.↗
NASA NTRS1990

Error analysis for pulsed maneuvers of a dual-spin spacecraft

The Galileo is a dual-spin interplanetary spacecraft which is scheduled for launch toward Jupiter in October of 1989. The spacecraft has twelve thrusters, located on the rotor, which can be operated in continuous or pulsed modes. In this paper probabilistic error models are presented for the pulsed maneuvers which are used to change the spacecraft's velocity. These models take into account all error sources which might affect the maneuver accuracies, such as wobble, nutation, plume impingement, thrust level variation and misalignment, gyro drift, burn timing errors and mass property uncertainties. The analytic models are sufficiently general so that they may be applied to all spin and dual-spin stabilized spacecraft. When these models are applied to the case of the Galileo spacecraft, the numerical results demonstrate that the spacecraft can achieve the maneuver accuracies required in order to successfully reach Jupiter and perform its scientific mission.

Longuski, James M.↗
NASA NTRS1992

The balance and harmony of control power for a combat aircraft in tactical maneuvering

An analysis is presented for a family of regular extremal attitude-maneuvers for the High Angle-of-Attack Research Vehicle that has thrust-vectoring capability. Different levels of dynamic coupling are identified in the combat aircraft attitude model, and the characteristic extremal-family motion is explained. It is shown why the extremal-family trajectories develop small sideslip-angles, a highly desirable feature from a practical viewpoint.

Bocvarov, Spiro↗
NASA NTRS1987

Independent Orbiter Assessment (IOA): Analysis of the orbital maneuvering system

The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA approach features a top-down analysis of the hardware to determine failure modes, criticality, and potential critical items. To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. The independent analysis results for the Orbital Maneuvering System (OMS) hardware are documented. The OMS provides the thrust to perform orbit insertion, orbit circularization, orbit transfer, rendezvous, and deorbit. The OMS is housed in two independent pods located one on each side of the tail and consists of the following subsystems: Helium Pressurization; Propellant Storage and Distribution; Orbital Maneuvering Engine; and Electrical Power Distribution and Control. The IOA analysis process utilized available OMS hardware drawings and schematics for defining hardware assemblies, components, and hardware items. Each level of hardware was evaluted and analyzed for possible failure modes and effects. Criticality was asigned based upon the severity of the effect for each failure mode.

Prust, C. D.↗
NASA NTRS2004

Modeling and Analysis of Large Amplitude Flight Maneuvers

Analytical methods for stability analysis of large amplitude aircraft motion have been slow to develop because many nonlinear system stability assessment methods are restricted to a state-space dimension of less than three. The proffered approach is to create regional cell-to-cell maps for strategically located two-dimensional subspaces within the higher-dimensional model statespace. These regional solutions capture nonlinear behavior better than linearized point solutions. They also avoid the computational difficulties that emerge when attempting to create a cell map for the entire state-space. Example stability results are presented for a general aviation aircraft and a micro-aerial vehicle configuration. The analytical results are consistent with characteristics that were discovered during previous flight-testing.

Anderson, Mark R.↗
NASA NTRS1986

Independent Orbiter Assessment (IOA): Analysis of the manned maneuvering unit

Results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA approach features a top-down analysis of the hardware to determine failure modes, criticality, and potential critical items (PCIs). To preserve indepedence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. This report documents the independent analysis results corresponding to the Manned Maneuvering Unit (MMU) hardware. The MMU is a propulsive backpack, operated through separate hand controllers that input the pilot's translational and rotational maneuvering commands to the control electronics and then to the thrusters. The IOA analysis process utilized available MMU hardware drawings and schematics for defining hardware subsystems, assemblies, components, and hardware items. Final levels of detail were evaluated and analyzed for possible failure modes and effects. Criticality was assigned based upon the worst case severity of the effect for each identified failure mode. The IOA analysis of the MMU found that the majority of the PCIs identified are resultant from the loss of either the propulsion or control functions, or are resultant from inability to perform an immediate or future mission. The five most severe criticalities identified are all resultant from failures imposed on the MMU hand controllers which have no redundancy within the MMU.

Bailey, P. S.↗
NASA NTRS1987

Computer Programs for Spacecraft Maneuvers

Multiple-encounter, multiple maneuver voyages analyzed in detail. Report describes ADAM (Advanced Analysis of Maneuvers) system, integrated collection of computer programs to aid design and analysis of maneuvers for deep space voyages involving multiple maneuvers and multiple encounters with planets and moons. Used in planning Galileo mission and used in both planning and operation of Voyager mission. Modularity of ADAM allows use of entirely new models, algorithms, trajectories, and maneuvering schedules. Characteristic great asset when spacecraft does not perform as planned.

Chadwick, Clyde↗
NASA NTRS1986

An adaptive guidance algorithm for an aerodynamically assisted orbital plane change maneuver

Using analysis results from the post trajectory optimization program, an adaptive guidance algorithm is developed to compensate for density, aerodynamic and thrust perturbations during an atmospheric orbital plane change maneuver. The maneuver offers increased mission flexibility along with potential fuel savings for future reentry vehicles. Although designed to guide a proposed NASA Entry Research Vehicle, the algorithm is sufficiently generic for a range of future entry vehicles. The plane change analysis provides insight suggesting a straight-forward algorithm based on an optimized nominal command profile. Bank angle, angle of attack, and engine thrust level, ignition and cutoff times are modulated to adjust the vehicle's trajectory to achieve the desired end-conditions. A performance evaluation of the scheme demonstrates a capability to guide to within 0.05 degrees of the desired plane change and five nautical miles of the desired apogee altitude while maintaining heating constraints. The algorithm is tested under off-nominal conditions of + or -30% density biases, two density profile models, + or -15% aerodynamic uncertainty, and a 33% thrust loss and for various combinations of these conditions.

Blissit, J. A.↗