Search NASA⌕ Search

SEARCH · Search NASA

Results for “mass attribute”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

An attribution of the low single-scattering albedo of biomass burning aerosol over the southeastern Atlantic

Abstract. Aerosol over the remote southeastern Atlantic is some of the most sunlight-absorbing aerosol on the planet: the in situ free-tropospheric single-scattering albedo at the 530 nm wavelength (SSA530 nm) ranges from 0.83 to 0.89 within ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) aircraft flights from late August–September. Here we seek to explain the low SSA. The SSA depends strongly on the black carbon (BC) number fraction, which ranges from 0.15 to 0.4. Low organic aerosol (OA)-to-BC mass ratios of 8–14 and modified combustion efficiency values >0.975 point indirectly to the dry, flame-efficient combustion of primarily grass fuels, with back trajectories ending in the miombo woodlands of Angola. The youngest aerosol, aged 4–5 d since emission, occupied the top half of a 5 km thick plume sampled directly west of Angola with a vertically consistent BC:ΔCO (carbon monoxide) ratio, indicating a homogenization of the source emissions. The younger aerosol, transported more quickly off of the continent by stronger winds, overlaid older, slower-moving aerosol with a larger mean particle size and fraction of BC-containing particles. This is consistent with ongoing gas condensation and the coagulation of smaller non-BC particles upon the BC-containing particles. The particle volumes and OA:BC mass ratios of the older aerosol were smaller, attributed primarily to evaporation following fragmentation, instead of dilution or thermodynamics. The CLARIFY (CLoud–Aerosol–Radiation Interaction and Forcing: Year 2017) aircraft campaign sampled aerosols that had traveled further to reach the more remote Ascension Island. CLARIFY reported higher BC number fractions, lower OA:BC mass ratios, and lower SSA yet larger mass absorption coefficients compared to this study's. Values from one ORACLES 2017 flight, held midway to Ascension Island, are intermediate, confirming the long-range changes. Overall the data are most consistent with continuing oxidation through fragmentation releasing aerosols that subsequently enter the gas phase, reducing the OA mass, rather than evaporation through dilution or thermodynamics. The data support the following best fit: SSA530nm=0.801+0055⋅(OA:BC) (r=0.84). The fires of southern Africa emit approximately one-third of the world's carbon; the emitted aerosols are distinct from other regional smoke emissions, and their composition needs to be represented appropriately to realistically depict regional aerosol radiative effects.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Electrochemical recovery of Nd using liquid metals (Bi and Sn) in LiCl-KCl-NdCl 3

Highly efficient recovery of Nd into liquid metals of Bi and Sn was achieved in molten LiCl-KCl-NdCl 3 electrolyte at 773–973 K by leveraging the strong interactions of Nd with liquid metals. Based on the emf measurements of Nd-Sn and Nd-Bi alloys, the activity values of Nd were determined as low as 1.1–5.8×10 –13 in both liquid metals at 973 K while the solubility of Nd was found to be 1.46 mol% in Sn and 5.65 mol% in Bi. Both liquid metals demonstrated high round-trip coulombic efficiencies (>99.3%) during deposition-removal cycles of 10–50 mA cm –2 and high recovery capacity up to approximately 20 mol% Nd beyond the solubility limit. In addition, a high Nd recovery yield (84–90%) with respect to the applied charge was confirmed based on chemical analysis of electrolysis products in Bi after constant current electrolysis (–50 mA cm –2 ) at 873–973 K. Overpotentials during the Nd deposition process were attributed to charge-transfer and mass-transport resistances based on the current-potential curve and electrochemical impedance spectroscopy. The charge-transfer kinetics of Nd deposition into liquid metals was facile with high exchange current densities at ~220 mA cm –2 . Finally, the exceptionally high recovery efficiency for Nd in the molten chloride is thought to result from strong chemical interactions (i.e., low activity) of Nd in liquid metals that encourage one-step reduction, i.e., Nd 3+ + 3e → Nd(in Bi or Sn) by effectively suppressing side reaction pathways from multivalent states (Nd 2+ and Nd 3+ ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Structural, Electronic, and Thermal Properties of CdSnAs 2

Structural, electrical, and thermal properties of CdSnAs 2 , with analyses from temperature-dependent transport properties over a large temperature range, are reported. Phase-pure microcrystalline powders were synthesized that were subsequently densified to a high-density homogeneous polycrystalline specimen for this study. Temperature-dependent transport indicates n-type semiconducting behavior with a very high and nearly temperature independent mobility over the entire measured temperature range, attributed to the very small electron effective mass of this material. The Debye model was successfully applied to model the thermal conductivity and specific heat. Furthermore, this work contributes to the fundamental understanding of this material, providing further insight and allowing for investigations into altering this and related physical properties of these materials for technological applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Mitigating Band Tailing in Kesterite Solar Absorbers: Ab Initio Quantum Dynamics

Open-circuit voltage deficits are limiting factors in kesterite solar cells. Addressing this issue by suppressing band tailing and nonradiative charge recombination is essential for enhancing the performance. We employ ab initio nonadiabatic molecular dynamics to elucidate the origin of band tailing and charge losses and propose a mitigation strategy. The simulations show that Cu–Zn disorder, associated with antisite defect clusters [Cu Zn +Zn Cu ], is a significant source of band tailing in kesterites, as evidenced by the much larger Urbach energy in disordered than ordered kesterites. Cu–Zn disorder gives rise to new sulfur-centered coordination polyhedra, increases structural inhomogeneity, changes electrostatic potential at sulfur centers, and shifts the S(3p) orbital energy. Differences in the S(3p)/Cu(3d) and S(3p)/Sn(5s) hybridization strengths and the S(3p) orbital energy shift reduce the band gap by 0.37 eV. Furthermore, Cu–Zn disorder enhances vibrational motion of sulfur anions and surrounding cations, increasing band gap fluctuations by 15 meV. The stronger electron–phonon interactions reduce charge carrier lifetimes and limit the kesterite solar cell efficiency. Partial substitution of Zn with Cd facilitates structural ordering and significantly suppresses band tailing, particularly in disordered systems. The improvement can be attributed to the larger atomic radius and mass of Cd, which weakens bonding around the anion, suppresses S-related vibrations within the covalent tetrahedra, and reduces nonadiabatic coupling, thereby increasing charge carrier lifetimes. The reported results establish the key influence of cation disorder on band tailing and reduced charge carrier lifetimes in kesterites and highlight cation disorder engineering as a strategy to achieve high-efficiency kesterite solar cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Porous and Amorphous Mn x Mo 3 S 13 Chalcogel Electrode for High-Capacity Conversion-Based Lithium-Ion Batteries

While Li-ion batteries (LIBs) are a leading energy storage technology, their energy densities are limited by the low capacity of conventional intercalation cathodes, driving interest in high energy-density Li–S batteries that make use of conversion chemistry. Achieving high capacity, reversibility, and cycle stability, and controlling volume changes in conversion batteries during the charge–discharge process, however, remains challenging. Here, in this study, we present a porous, amorphous, sulfide-based Mn x Mo 3 S 13 chalcogel, which concurrently offers high capacity and cycle stability. The solution-processable room temperature synthesized Mn x Mo 3 S 13 (x = 0.25) chalcogel exhibits a local structure that resembles the Mo 3 S 13 cluster with Mn 2+ distributed across the Mo 3 S 13 matrix, as determined by synchrotron X-ray pair distribution function (PDF) and extended X-ray absorption fine structure (EXAFS). Ab initio molecular dynamics (AIMD) simulations reveal that Mn 2+ incorporation shortens the polysulfide chain in the gel matrix compared to the Mo 3 S 13 chalcogel, while forming a coordination environment with disulfide groups, analogous to the experimental findings. A Li/Mn 0.25 Mo 3 S 13 half-cell delivers 897 mAh g –1 capacity during the first discharge and retains 571 mAh g –1 capacity after 100 cycles at a C/3 rate. Distribution of relaxation time (DRT) unveils a stable solid–electrolyte interphase (SEI) formation upon cycling that enables charge–discharge reversibility. Here, the enhanced capacity retention and cycle stability compared to those of the Li/Mo 3 S 13 cell are attributed to the reduced dissolution of active mass into the electrolyte, facilitated by the formation of shorter polysulfide chains within the Mn 0.25 Mo 3 S 13 structure and the strong affinity of Lewis-acidic Mn 2+ for polysulfide anions generated during the charge–discharge process of the Li/Mn 0.25 Mo 3 S 13 cell. Thus, this work illustrates a design principle of material for high-capacity and cycle-stable Li-metal sulfide batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Type Ia supernova magnitude step from the local dark matter environment

ABSTRACT Residuals in the Hubble diagram at optical wavelengths and host galaxy stellar mass are observed to correlate in type Ia supernovae (SNe Ia) (‘magnitude step’). Among possible progenitor channels for the associated explosions, those based on dark matter (DM) have attracted significant attention, including our recent proposal that ‘normal’ SNe Ia from bare detonations in sub-Chandrasekhar white dwarf stars are triggered by the passage of asteroid-mass primordial black holes (PBHs): the magnitude step could then originate from a brightness dependence on stellar properties, on DM properties, or both. Here, we present a method to estimate the local DM density and velocity dispersion of the environment of SN Ia progenitors. We find a luminosity step of $0.52\pm 0.11\,$ mag corresponding to bins of high versus low DM density in a sample of 222 low-redshift events from The Open Supernova Catalog. We investigate whether the magnitude step can be attributed to local DM properties alone, assuming asteroid-mass PBHs. Given the inverse correlation between SN Ia brightness and PBH mass, an intriguing explanation is a spatially inhomogeneous PBH mass function. If so, a strong mass segregation in the DM density-dependent PBH mass scale is needed to explain the magnitude step. While mass segregation is observed in dense clusters, it is unlikely to be realized on galactic scales. Therefore, if DM consists of asteroid-mass PBHs, the magnitude step is more likely to exist, and dominantly to be attributed to local stellar properties.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Effects of aluminum content on thermoelectric performance of Al x CoCrFeNi high-entropy alloys

Introducing a non-regular distribution in the mass and bonding by including distinctly different elements can reduce the phonon transport even within structurally well-ordered materials. These distributions are a quality of all high-entropy alloys (HEAs), however the inclusion of aluminum in Al x CoCrFeNi is particularly impactful due to the large mismatch in atomic mass with other components. The resultant low phonon conductivity is a requirement for high thermoelectric performance, motivating the investigation of the effects of Al content on phonon transport as well as other thermoelectric properties. This work examines the phonon and electron transport and thermoelectric conversion properties with various Al contents (0 ≤ x Al ≤ 2) in this Cantor alloy using first-principles calculations, molecular dynamics, and semi-classical Boltzmann transport theory. The calculated phonon density of states and thermoelectric properties present reasonable agreements with experiments, including neutron scattering. A large reduction of phonon conductivity (k L ) is observed even with low x Al s, which we attribute to effective phonon scatterings by the large mass mismatch. However, its temperature dependence is not significant, demonstrating a minor contribution of interphonon scattering. In contrast, electrical conductivity (σ) and Seebeck coefficient (S) increase with temperature at higher x Al s with body-centered cubic structures. Therefore, the thermoelectric figure of merit (ZT) of Al x CoCrFeNi HEAs is enhanced by increasing the Al content mainly due to the increase of the thermoelectric power factor (σS 2 ) at high temperatures, while at low temperatures the phonon-scattering enhancement by mass mismatch is also important.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Operando Contactless EFISH Study of the Rate-Determining Step of Light-Driven Water Oxidation on TiO 2 Photoanodes

For many slow solar-fuel-forming reactions, the accumulation of photogenerated minority carriers on the photoelectrode surface leads to light-induced band edge unpinning, affecting the junction properties by decreasing band bending in the semiconductor space charge layer and increasing the driving force of surface reactions in the electric double layer. In this study, we demonstrate a contactless operando electric field-induced second harmonic generation (EFISH) method for measuring the band bending change (δΔΦ SCR L ) on photoelectrodes upon photoexcitation. For ndoped rutile TiO 2 water oxidation photoanodes at pH 7, δΔΦ SCR L increases at more positive potentials or higher illumination power density until it reaches saturation values. We show that under fast mass transport conditions, δΔΦ SCR L is exclusively attributed to the accumulated charged rate-determining species that can be regarded as temporary surface states, and the relationship between the photocurrent and δΔΦ SCR L can be well modeled by assuming that hole trap states function as the reaction center. Kinetic isotope experiments identify proton-coupled electron transfer as the rate-determining step and suggest a possible chemical nature of the key intermediate. We demonstrate that light-induced band edge unpinning is a beneficial feature under high illumination conditions for oxygen evolution reaction on TiO 2 because it maintains the photon-to-current conversion efficiency by enhancing the surface reaction driving force, shedding light on the actual device application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Lightning Rings and Gravity Waves: Insights Into the Giant Eruption Plume From Tonga's Hunga Volcano on 15 January 2022

Abstract On 15 January 2022, Hunga Volcano in Tonga produced the most violent eruption in the modern satellite era, sending a water‐rich plume at least 58 km high. Using a combination of satellite‐ and ground‐based sensors, we investigate the astonishing rate of volcanic lightning (>2,600 flashes min −1 ) and what it reveals about the dynamics of the submarine eruption. In map view, lightning locations form radially expanding rings. We show that the initial lightning ring is co‐located with an internal gravity wave traveling >80 m s −1 in the stratospheric umbrella cloud. Buoyant oscillations of the plume's overshooting top generated the gravity waves, which enhanced turbulent particle interactions and triggered high‐current electrical discharges at unusually high altitudes. Our analysis attributes the intense lightning activity to an exceptional mass eruption rate (>5 × 10 9 kg s −1 ), rapidly expanding umbrella cloud, and entrainment of abundant seawater vaporized from magma‐water interaction at the submarine vent.

58 GEOSCIENCES↗
DOE OSTI2023

The birth and evolution of solvated electrons in the water

The photo-induced radiolysis of water is an elementary reaction in biology and chemistry, forming solvated electrons, OH radicals, and hydronium cations on fast time scales. Here, we use an optical-pump terahertz-probe spectroscopy setup to trigger the photoionization of water molecules with optical laser pulses at ~400 nm and then time-resolve the transient solvent response with broadband terahertz (THz) fields with a ~90 fs time resolution. We observe three distinct spectral responses. The first is a positive broadband mode that can be attributed to an initial diffuse, delocalized electron with a radius of (22 ± 1) Å, which is short lived (<200 fs) because the absorption is blue-shifting outside of the THz range. The second emerging spectroscopic signature with a lifetime of about 150 ps is attributed to an intermolecular mode associated with a mass rearrangement of solvent molecules due to charge separation of radicals and hydronium cations. After 0.2 ps, we observe a long-lasting THz signature with depleted intensity at 110 cm -1 that is well reproduced by ab initio molecular dynamics. We interpret this negative band at 110 cm -1 as the solvent cage characterized by a weakening of the hydrogen bond network in the first and second hydration shells of the cavity occupied by the localized electron.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Review and Summary of Corrosion Behavior for Aluminum-Clad Spent Nuclear Fuel in Dry Storage

A description of the corrosion behavior of aluminum alloys used for cladding on aluminum-based, aluminum-clad nuclear fuel used in research reactors under potential dry storage conditions has been compiled. An evaluation is made of potential additional corrosion with water postulated to not be removed during drying. The relative humidity (RH) produced by typical dryness criteria for industrial spent nuclear fuel drying is expected to be low, particularly at high temperatures (17% RH at 20°C and lower at higher temperatures). Existing corrosion data suggests that negligible vapor-phase corrosion of aluminum is expected at such low humidity, even for nominally bare aluminum surfaces. That is, the predicted relative humidity from free water (e.g., 17% RH) is below the “critical” relative humidity (~40% RH at room temperature), below which no significant corrosion is observed for bare aluminum. Furthermore, reported room-temperature corrosion rates are very low even under saturated (100% RH) water vapor. Existing results showing significant vapor-phase corrosion corresponded specifically to conditions of high temper ed with high relative humidity. A relatively large reservoir of (chemically bound) water exists in the aluminum (oxy)hydroxide films on the SNF cladding surface. The estimated total could saturate the gas even at relatively high temperature if fully released; however, its release as molecular water is expected to only be plausible if the temperature during storage exceeds both the drying temperature and the threshold for thermal decomposition of the trihydroxides (~220°C). Therefore, the combination of high temperature and high relative humidity that could drive significant corrosion is considered implausible during sealed dry storage following an appropriate drying process, to include >220°C drying for canisters that may approach or exceed this temperature during storage. Vapor-phase testing of aluminum samples with an adherent (oxy)hydroxide layer, prepared in liquid water to resemble those on actual aluminum-clad spent nuclear fuel (ASNF), did not observe evidence of additional corrosion even at combined high-temperature (up to 180°C) and high-humidity (up to 100% RH) conditions. Instead, small net mass losses were observed for most specimens and attributed to dehydration of the samples, which had been air-dried only prior to testing. ASNF being moved to dry storage is expected to have an existing (oxy)hydroxide film, suggesting that the cladding will be less prone to additional corrosion than bare aluminum metal. If significant corrosion did occur during sealed storage, the overall extent and impact is expected to be small. Corrosion post-closure of a canister would not alter the total amount of hydrogen in the canister, so it would have no effect on the maximum H 2 release already assessed in existing bounding calculations. In addition, the total amount of water in a 25-µm dense bayerite film would consume a only ~8 µm additional aluminum metal on average, if fully consumed by oxidizing aluminum metal to Al 2 O 3 . These conclusions are consistent with ASNF-in-canister simulations to date, which included a reaction pathway for corrosion using kinetics from previous literature and believed to be conservative and predicted very low rates of corrosion.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Hundreds of Low-mass Active Galaxies in the Galaxy And Mass Assembly (GAMA) Survey

We present an entirely new sample of 388 low-mass galaxies (M $\star$ ≤ 10 10 M ⊙ ) that have spectroscopic signatures indicating the presence of massive black holes (BHs) in the form of active galactic nuclei (AGNs) or tidal disruption events. Of these, 70 have stellar masses in the dwarf galaxy regime with 10 8 ≲ M $\star$ /M ⊙ ≲ 10 9.5 . We identify the active galaxies by analyzing optical spectra of a parent sample of ~23,000 low-mass emission-line galaxies in the Galaxy and Mass Assembly (GAMA) Survey Data Release 4, and employing four different diagnostics based on narrow emission-line ratios and the detection of high-ionization coronal lines. We find that 47 of the 388 low-mass active galaxies exhibit broad Hα in their spectra, corresponding to virial BH masses in the range M BH ~ 10 5.0–7.7 M ⊙ with a median BH mass of $\langle$M BH $\rangle$ ~ 10 6.2 M ⊙ . Our sample extends to higher redshifts (z ≤ 0.3; $\langle$z$\rangle$ = 0.13) than previous samples of AGNs in low-mass/dwarf galaxies based on Sloan Digital Sky Survey spectroscopy, which can be attributed to the spectroscopic limit of GAMA being ~2 mag deeper. Moreover, our multi-diagnostic approach has revealed low-mass active galaxies spanning a wide range of properties, from blue star-forming dwarfs to luminous "miniquasars" powered by low-mass BHs. As such, this work has implications for BH seeding and AGN feedback at low masses.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

The stellar mass of the Gaia -Sausage/Enceladus accretion remnant

The Gaia-Sausage/Enceladus (GS/E) structure is an accretion remnant that comprises a large fraction of the Milky Way’s stellar halo. We study GS/E using high-purity samples of kinematically selected stars from APOGEE DR16 and Gaia. Employing a novel framework to account for kinematic selection biases using distribution functions, we fit density profiles to these GS/E samples and measure their masses. We find that GS/E has a shallow density profile in the inner Galaxy, with a break between 15 and 25 kpc beyond which the profile steepens. We also find that GS/E is triaxial, with axis ratios 1:0.55:0.45 (nearly prolate), and the major axis is oriented about 80° from the Sun–Galactic centre line and 16° above the plane. We measure a stellar mass for GS/E of $1.45\, ^{+0.92}_{-0.51}\, \mathrm{(stat.)}\, ^{+0.13}_{-0.37} \mathrm{(sys.)}\ \times 10^{8}$ M ⊙ . Our mass estimate is lower than others in the literature, a finding we attribute to the excellent purity of the samples we work with. We also fit a density profile to the entire Milky Way stellar halo, finding a mass in the range of 6.7–8.4 × 10 8 M ⊙ , and implying that GS/E could make up as little as 15–25 per cent of the mass of the Milky Way stellar halo. Our lower stellar mass combined with standard stellar mass-to-halo mass relations implies that GS/E constituted a minor 1:8 mass-ratio merger at the time of its accretion.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Impact of Mixed Sources on the Atmospheric Aerosols of Urbanized Areas in the Philippines

Southeast Asia (SEA) holds approximately 10% of the global population, who are constantly exposed to severe local and transboundary air pollution. Here, we characterized the physiochemical characteristics of atmospheric aerosols in urbanized areas (Valenzuela, Manila, and Boracay) in the Philippines. The variability of coarse and fine aerosols, black carbon (BC), and trace elements of particulate matter (PM) were analyzed between June 2017 and April 2019. The average fine (coarse) aerosols of Valenzuela, Manila, and Boracay were 26.7 (80.4), 27.9 (86.6), and 20.9 (124.6) µg m –3 , respectively, which all exceeded the recent annual limits of the World Health Organization. The average BC level was 6.6 µg m –3 across three sampling sites, ranging between 4 to 83% of the fine PM mass. Vehicular emission predominated at the extreme urban sites as reflected by the high BC levels attributed to transport activities. The conventional receptor modeling procedure was implemented and improved by integrating BC speciation, which distinguished vehicle emission and biomass burning. The new method revealed eight and seven sources influencing the atmospheric conditions of Valenzuela and Boracay. In particular, the elevated zinc and lead highlighted the substantial impact of industrial sources in Valenzuela, attributing more than 9% of PM 2.5 . For Boracay, construction activities evidently enhanced PM based on the mass burden of calcium. Overall, the results uncovered the origin of PM 2.5 in urbanized locations in the Philippines, which will be valuable in reducing the exposure of a significant portion of the global population to harmful pollutants.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Assessing the sensitivity and repeatability of permanganate oxidizable carbon as a soil health metric: An interlab comparison across soils

Soil organic matter is central to the soil health framework. Therefore, reliable indicators of Soil organic matter is central to the soil health framework. Therefore, reliable indicators of changes in soil organic matter are essential to inform land management decisions. Permanganate oxidizable carbon (PDXC), an emerging soil health indicator, has shown promise for being sensitive to soil management. However, strict standardization is required for widespread implementation in research and commercial contexts. Here, we used 36 soils-three from each of the 12 USDA soil orders-to determine the effects of sieve size and soil mass of analysis on PDXC results. Using replicated measurements across 12 labs in the US and the EU (n = 7951 samples), we quantified the relative importance of 1) variation between labs, 2) variation within labs, 3) effect soil mass, and 4) effect of soil sieve size on the repeatability of PDXC. We found a wide range of overall variability in PDXC values across labs (0.03 to 171.8%; mean = 13.4%), and much of this variability was attributable to within-lab variation (median = 6.5%) independently of soil mass or sieve size. Greater soil mass (2.5 g) decreased absolute PDXC values by a mean of 177 mg kg -1 soil and decreased analytical variability by 6.5%. For soils with organic carbon (SOC) >10%, greater soil mass (2.5 g) resulted in more frequent PDXC values above the limit of detection whereas the lower soil mass (0.75 g) resulted in PDXC values below the limit of detection for SOC contents <5%. A finer sieve size increased absolute values of PDXC by 124 mg kg -1 while decreasing the analytical variability by 1.8%. In general, soils with greater SOC contents had lower analytical variability. These results point to potential standardizations of the PDXC protocol that can decrease the variability of the metric. We recommend that the PDXC protocol be standardized to use 2.5 g for soils <10% SOC. Sieve size was a relatively small contributor to analytical variability and therefore we recommend that this decision be tailored to the study purpose. Tradeoffs associated with these standardizations can be mitigated, ultimately providing guidance on how to standardize PDXC for routine analysis.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

The DESI One-Percent Survey: Modelling the clustering and halo occupation of all four DESI tracers with U CHUU

We present results from a set of mock lightcones for the DESI One-Percent Survey, created from the UCHUU simulation. This 8 h −3 Gpc 3 N-body simulation comprises 2.1 trillion particles and provides high-resolution dark matter (sub)haloes in the framework of the Planck-based ΛCDM cosmology. Employing the subhalo abundance matching (SHAM) technique, we populated the UCHUU (sub)haloes with all four DESI tracers – Bright Galaxy Survey (BGS), luminous red galaxies (LRGs), emission line galaxies (ELGs), and quasars (QSOs) – to z = 2.1. Our method accounts for redshift evolution as well as the clustering dependence on luminosity and stellar mass. The two-point clustering statistics of the DESI One-Percent Survey generally agree with predictions from UCHUU across scales ranging from 0.3 h −1 Mpc to 100 h −1 Mpc for the BGS and across scales ranging from 5 h −1 Mpc to 100 h −1 Mpc for the other tracers. We observed some differences in clustering statistics that can be attributed to incompleteness of the massive end of the stellar mass function of LRGs, our use of a simplified galaxy-halo connection model for ELGs and QSOs, and cosmic variance. We find that at the high precision of UCHUU, the shape of the halo occupation distribution (HOD) of the BGS and LRG samples is smaller bias values, likely due to cosmic variance. The bias dependence on absolute magnitude, stellar mass, and redshift aligns with that of previous surveys. These results provide DESI with tools to generate high-fidelity lightcones for the remainder of the survey and enhance our understanding of the galaxy-halo connection.

cosmology↗
DOE OSTI2022

Local Group timing argument and virial theorem mass estimators from cosmological simulations

ABSTRACT We identify Local Group (LG) analogues in the IllustrisTNG cosmological simulation, and use these to study two-mass estimators for the LG: One based on the timing argument (TA) and one based on the virial theorem (VT). Including updated measurements of the Milky Way-M31 tangential velocity and the cosmological constant, we show that the TA mass estimator slightly overestimates the true median LG-mass, though the ratio of the TA to the true mass is consistent at the approximate 90 per cent c.l.. These are in broad agreement with previous results using dark matter-only simulations. We show that the VT estimator better estimates the true LG-mass, though there is a larger scatter in the virial mass to true mass ratio relative to the corresponding ratio for the TA. We attribute the broader scatter in the VT estimator to several factors, including the predominantly radial orbits for LG satellite galaxies, which differs from the VT assumption of isotropic orbits. With the systematic uncertainties we derive, the updated measurements of the LG mass at 90 per cent c.l. are $4.75_{-2.41}^{+2.22} \times 10^{12}$ M⊙ from the TA and $2.0_{-1.5}^{+2.1} \times 10^{12}$ M⊙ from the VT. We consider the LMC’s effect on the TA and VT LG mass estimates, and do not find exact LMC–MW–M31 analogues in the Illustris simulations. However, in LG simulations with satellite companions as massive as the LMC, we find that the effect on the TA and VT estimators is small, though we need further studies on a larger sample of LMC–MW–M31 systems to confirm these results.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Wide Dust Gaps in Protoplanetary Disks Induced by Eccentric Planets: A Mass-eccentricity Degeneracy

The tidal perturbation of embedded protoplanets on their natal disks has been widely attributed to be the cause of gap-ring structures in submillimeter images of protoplanetary disks around T Tauri stars. Numerical simulations of this process have been used to propose scaling of characteristic dust-gap width/gap-ring distance with respect to planet mass. Applying such scaling to analyze observed gap samples yields a continuous mass distribution for a rich population of hypothetical planets in the range of several Earth to Jupiter masses. In contrast, the conventional core-accretion scenario of planet formation predicts a bimodal mass function due to (1) the onset of runaway gas accretion above ~20 Earth masses and (2) suppression of accretion induced by gap opening. Here, we examine the dust disk response to the tidal perturbation of eccentric planets as a possible resolution of this paradox. Based on simulated gas and dust distributions, we show the gap-ring separation of Neptune-mass planets with small eccentricities might become comparable to that induced by Saturn-mass planets on circular orbits. Furthermore, this degeneracy may obliterate the discrepancy between the theoretical bimodal mass distribution and the observed continuous gap width distribution. Despite damping due to planet–disk interaction, modest eccentricity may be sustained either in the outer regions of relatively thick disks or through resonant excitation among multiple super Earths. Moreover, the ring-like dust distribution induced by planets with small eccentricities is axisymmetric even in low viscosity environments, consistent with the paucity of vortices in Atacama Large Millimeter/submillimeter Array images.

79 ASTRONOMY AND ASTROPHYSICS↗