Search NASA⌕ Search

SEARCH · Search NASA

Results for “mass flux”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Progress on a Rayleigh Scattering Mass Flux Measurement Technique

A Rayleigh scattering diagnostic has been developed to provide mass flux measurements in wind tunnel flows. Spectroscopic molecular Rayleigh scattering is an established flow diagnostic tool that has the ability to provide simultaneous density and velocity measurements in gaseous flows. Rayleigh scattered light from a focused 10 Watt continuous-wave laser beam is collected and fiber-optically transmitted to a solid Fabry-Perot etalon for spectral analysis. The circular interference pattern that contains the spectral information that is needed to determine the flow properties is imaged onto a CCD detector. Baseline measurements of density and velocity in the test section of the 15 cm x 15 cm Supersonic Wind Tunnel at NASA Glenn Research Center are presented as well as velocity measurements within a supersonic combustion ramjet engine isolator model installed in the tunnel test section.

Mielke-Fagan, Amy F.↗

Latitudinal Variation of Solar Wind Speed and Mass Flux in the Acceleration Region of the Solar Wind during Solar Minimum Inferred from Spectral Broadening measurements

In this paper, we use an aggregate of S-band 2.3 GHz (13 cm) spectral broadening observations conducted during solar minimum conditions by the Mariner 4, Pioneer 10, Mariner 10, Helios 1 & 2 and Viking spacecraft to infer the first measurements of the latitudinal variation of solar wind speed and mass flux in the acceleration region of the solar wind at 3-8 R(sub o).

latitudinal variation of solar wind mass flux in a↗

Air-mass flux measurement system using Doppler-shifted filtered Rayleigh scattering

An optical system has been investigated to measure mass flux distributions in the inlet of a high speed air-breathing propulsion system. Rayleigh scattered light from air is proportional to the number density of molecules and hence can be used to ascertain the gas density in a calibrated system. Velocity field measurements are achieved by spectrally filtering the elastically-scattered Doppler-shifted light with an absorbing molecular filter. A novel anamorphic optical collection system is used which allows optical rays from different scattering angles, that have different Doppler shifts, to be recorded separately. This is shown to obviate the need to tune the laser through the absorption to determine velocities, while retaining the ability to make spatially-resolved measurements along a line. By properly selecting the laser tuning and filter parameters, simultaneous density measurements can be made. These properties are discussed in the paper and experiments demonstrating the velocimetry capability are described.

Shirley, John A.↗

The Extraterrestrial Mass Flux on the Early Earth

We have measured iridium and platinum in ancient metasediments to obtain the first direct constraints on the extraterrestrial mass flux at the Earth's surface before 3.8 Gyr (the Hadean era). The craters of the Moon record an intense "late heavy bombardment" (LHB) beginning as early as 4.15 Gyr, and terminating ca.3.85 +/- 0.05 Gyr. Recent geochemical studies of metasediments and other supracrustal rocks from Akilia Island, in southern West Greenland, appear to extend both the record of marine sedimentation and the record of metabolically-sophisticated life to > 3.8 Gyr. Additional information is contained in the original extended abstract.

Anbar, A. D.↗

Determination of local values of gas and liquid mass flux in highly loaded two-phase flow

A measurement system using a deceleration probe was designed for determining the local values of gas and liquid mass flux in various gas/liquid droplet sprayfields. The system was used to characterize two-phase flowfields generated by gas/liquid rocket-motor injectors. Measurements were made at static pressures up to 500 psia and injected mass flow ratios up to 20. The measurement system can also be used at higher pressures and in gas/solid flowfields.

Burick, R. J.↗

Toward a Unified Parameterization of the Boundary Layer and Moist Convection: A New Type of Mass-Flux Model - Part 1

Higher-order closure (HOC) models have been proposed for parameterization of the turbulent planetary boundary layer (PBL). HOC models must include closures for higher-order moments (e.g., fourth moments in third-order closure models), for pressure terms, and for dissipation terms. Mass-flux closure (MFC) models have been proposed for parameterization of cumulus convection and, more recently, the convective PBL. MFC models include closures for lateral mass exchanges and for pressure terms (which are usually ignored). The authors developed a new kind of model that combines HOC and MFC, which they hope will be useful for the parameterization of both the PBL and cumulus convection, in a unified framework. Such a model is particularly well suited to regimes in which the PBL turbulence and the cumulus convection are not well separated, for example, the broken stratocumulus and shallow cumulus regimes. The model makes use of an assumed joint probability distribution for the variables of interest, and the equations typically used in HOC models can be derived by integrating over the distribution. Accordingly, the model is called Assumed-Distribution Higher-Order Closure (ADHOC). The prognostic variables of ADHOC are the mean state, the second and third moments of the vertical velocity, and the vertical fluxes of other quantities of interest. All of the parameters of the distribution can be determined from the predicted moments, thereafter the joint distribution is effectively known, and so any and all moments can be constructed as needed. In this way, the usual closure problem of "higher moments" is avoided. The pressure-term parameterizations previously developed for HOC models are used to predict the convective fluxes and the moments of the vertical velocity. In companion papers, parameterizations of lateral mass exchanges and subplume-scale fluxes are presented, and then ADHOC is applied to several observationally based tropical, subtropical, and dry convective boundary layers.

Lappen, Cara-Lyn↗

Normalized vertical ice mass flux profiles from vertically pointing 8-mm-wavelength Doppler radar

During the FIRE 2 (First International Satellite Cloud Climatology Project Regional Experiment) project, NOAA's Wave Propagation Laboratory (WPL) operated its 8-mm wavelength Doppler radar extensively in the vertically pointing mode. This allowed for the calculation of a number of important cirrus cloud parameters, including cloud boundary statistics, cloud particle characteristic sizes and concentrations, and ice mass content (imc). The flux of imc, or, alternatively, ice mass flux (imf), is also an important parameter of a cirrus cloud system. Ice mass flux is important in the vertical redistribution of water substance and thus, in part, determines the cloud evolution. It is important for the development of cloud parameterizations to be able to define the essential physical characteristics of large populations of clouds in the simplest possible way. One method would be to normalize profiles of observed cloud properties, such as those mentioned above, in ways similar to those used in the convective boundary layer. The height then scales from 0.0 at cloud base to 1.0 at cloud top, and the measured cloud parameter scales by its maximum value so that all normalized profiles have 1.0 as their maximum value. The goal is that there will be a 'universal' shape to profiles of the normalized data. This idea was applied to estimates of imf calculated from data obtained by the WPL cloud radar during FIRE II. Other quantities such as median particle diameter, concentration, and ice mass content can also be estimated with this radar, and we expect to also examine normalized profiles of these quantities in time for the 1993 FIRE II meeting.

Orr, Brad W.↗

Mass fluxes and magnetic structures in the chromosphere and the transition region - Canopies

Preliminary results of applying a model of canopy-type magnetic lines to account for observed mass fluxes in the chromosphere and transiton region are presented. A set of center-to-limb data obtained in H-alpha and C IV, and to which the model is applied, is reported. The C IV line is assumed to form everywhere at the same height, and the H-alpha formation height is derived by assuming that the absorption coefficient is proportional to the local density. The density ratio between H-alpha and C IV levels is taken to be 100. From the results, it is concluded that the model accounts for the low ratio of radial velocities C IV/H-alpha at r = 0, the increase of H-alpha velocity near the limb, and the general center-to-limb behavior in both lines.

Mein, P.↗

Application of two-component phase Doppler interferometry to the measurement of particle size, mass flux, and velocities in two-phase flows

Two-component phase Doppler interferometry is described, along with its application for the spatially-resolved measurements of particle size, velocity, and mass flux as well as continuous phase velocity. This technique measures single particle events at a point in the flow; droplet size is deduced from the spatial phase shift of the Doppler signal. Particle size influence and discrimination of continuous and discrete phases are among issues covered. Applications are presented for four cases: an example of the discrimination of two sizes of glass beads in a jet flow; a demonstration of the discrimination of phases in a spray field; an assessment of atomizer symmetry with respect to fuel distribution; and a characterization of a droplet field in a reacting spray. It is noted that the above technique is especially powerful in delineating droplet interactions in the swirling, complex flows typical of realistic systems.

Mcdonell, V. G.↗

The Martian hydrologic cycle - Effects of CO2 mass flux on global water distribution

The Martian CO2 cycle, which includes the seasonal condensation and subsequent sublimation of up to 30 percent of the planet's atmosphere, produces meridional winds due to the consequent mass flux of CO2. These winds currently display strong seasonal and hemispheric asymmetries due to the large asymmetries in the distribution of insolation on Mars. It is proposed that asymmetric meridional advection of water vapor on the planet due to these CO2 condensation winds is capable of explaining the observed dessication of Mars' south polar region at the current time. A simple model for water vapor transport is used to verify this hypothesis and to speculate on the effects of changes in orbital parameters on the seasonal water cycle.

James, P. B.↗

Thunderstorm vertical velocities and mass flux estimated from satellite data

Infrared geosynchronous satellite data with an interval of five minutes between images are used to estimate thunderstorm top ascent rates on two case study days. A mean vertical velocity of 3.5/ms for 19 clouds is calculated at a height of 8.7 km. This upward motion is representative of an area of approximately 10km on a side. Thunderstorm mass flux of approximately 2x10 to the 11th power/gs is calculated, which compares favorably with previous estimates. There is a significant difference in the mean calculated vertical velocity between elements associated with severe weather reports (w bar=4.6/ms) and those with no such reports (2.5/ms). Calculations were made using a velocity profile for an axially symmetric jet to estimate the peak updraft velocity. For the largest observed w value of 7.8/ms the calculation indicates a peak updraft of approximately 50/ms.

Adler, R. F.↗

New methods to detect particle velocity and mass flux in arc-heated ablation/erosion facilities

Arc-heated flow facilities with injected particles are used to simulate the erosive and ablative/erosive environments encountered by spacecraft re-entry through fog, clouds, thermo-nuclear explosions, etc. Two newly developed particle diagnostic techniques used to calibrate these facilities are discussed. One technique measures particle velocity and is based on the detection of thermal radiation and/or chemiluminescence from the hot seed particles in a model ablation/erosion facility. The second technique measures a local particle rate, which is proportional to local particle mass flux, in a dust erosion facility by photodetecting and counting the interruptions of a focused laser beam by individual particles.

Brayton, D. B.↗

Rapid tuning CW laser technique for measurements of gas velocity, temperature, pressure, density, and mass flux using NO

An intracavity-doubled rapid-tuning CW ring dye laser was used to acquire fully resolved absorption profiles of NO line pairs in the A-X band at 225 nm at a rate of 4 kHz. These profiles were utilized for simultaneous measurements of flow parameters in the high-speed 1D flows generated in a shock tube. Velocity was determined from the Doppler shift, measured using a pair of profiles simultaneously acquired at different angles with respect to the flow direction. Temperature was determined from the intensity ratio of the adjacent lines. Pressure and density were found both from the collisional broadening and the fractional absorption. From this information the mass flux was determined. The results compare well to 1D shock calculations.

Chang, Albert Y.↗

Modeling energy and mass fluxes from prairie canopies

The main emphasis of this research project is on partitioning of mass and energy fluxes between vegetation and soil at the FIFE site, preparation of data from the FIFE Information System for an international thermal data set comparison, and studying the relation between surface temperatures observed from satellites and in situ measurements of surface temperature.

Norman, John M.↗

Modeling of Fluctuating Mass Flux in Variable Density Flows

The approach solves for both Reynolds and Favre averaged quantities and calculates the scalar pdf. Turbulent models used to close the governing equations are formulated to account for complex mixing and variable density effects. In addition, turbulent mass diffusivities are not assumed to be in constant proportion to turbulent momentum diffusivities. The governing equations are solved by a combination of finite-difference technique and Monte-Carlo simulation. Some preliminary results on simple variable density shear flows are presented. The differences between these results and those obtained using conventional models are discussed.

So, R. M. C.↗

Mass flux and crystal composition in the Hg(0.8)Cd(0.2)Te-HgI2 vapor transport system

Chemical vapor transport (CVT) studies of the Hg(0.8)Cd(0.2)Te-HgI2 system were performed to further test and extend the transport model developed earlier in this laboratory for this system. Experimental results in terms of mass transport rates and composition of the grown crystals as a function of growth temperature and of transport agent (HgI2) pressure, for a fixed source temperature (590 C), are compared with theoretically predicted data. The good agreement between experimental and theoretical results confirms the validity of the model applied to the CVT process of this system.

Wiedemeier, Heribert↗