Search NASA⌕ Search

SEARCH · Search NASA

Results for “mesoscale simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Simulating a Mesoscale Convective System Using WRF with a New Spectral Bin Microphysics: Part 1: Hail vs Graupel

A modified Fast Spectral Bin Microphysics scheme (FSBM-2) embedded into the Weather Research and Forecasting Model (WRF) is used to simulate a mesoscale deep convective system observed during the Midlatitude Continental Convective Clouds Experiment (MC3E). FSBM-2 uses modified source codes as compared to the current FSBM (FSBM-1). In contrast to FSBM-1, FSBM-2 can simulate hail of several cm in diameter and includes additional processes such as spontaneous breakup of raindrops and aerosol regeneration by drop evaporation. It is shown that allowing large hail particles of diameters exceeding about 1 cm substantially increases the agreement between the simulated and observed squall-line structures both in the convective and stratiform regions. In contrast, if graupel particles are used to represent high-density hydrometeors in convective areas, the ratio of convective-to-stratiform areas diverges from the ratio seen in observations and maximum radar reflectivities are substantially underestimated. Analysis of snow size distributions in the stratiform area shows an important link between the ice crystals formed by homogeneous freezing in the convective area to ice particle number concentration in the stratiform region. Simulated raindrop size distributions in the stratiform area below the melting level from FSBM-2 show a good agreement with observations. The regeneration of CCN by droplet evaporation and detrainment of these CCN to the stratiform region increases the concentration of CCN there up to 8-9 km altitude; the additional CCN penetrate clouds and produce new droplets, leading to some convection intensification. Key words: Mesoscale convective systems (MCS), squall lines, spectral bin microphysics, large hail, in-cloud nucleation, size distributions of hydrometeors in MCS.

Shpund, Kobby↗
NASA NTRS1984

Numerical simulation of mesoscale precipitation

The numerical simulation of mesoscale precipitation as well as the development of software and appropriate computer techniques are investigated. The development of a mesoscale model and the means to incorporate meteorological data into the model are examined.

Kalb, M. W.↗
NASA NTRS1987

Mesoscale lake-effect snowstorms in the vicinity of Lake Michigan - Linear theory and numerical simulations

Mesoscale lake-effect snowstorms in the vicinity of Lake Michigan are studied by a linear steady-state analytic model and a nonlinear time-dependent numerical model with parameterized subgrid-scale physics. The solutions of the linear model show that the orientation of the mean wind field to the surface heating pattern is crucial to the shapes of the disturbances. The results indicate that the relative warmth of the lake surface can induce three updraft centers under a westerly wind, two updraft centers/bands under a northwesterly wind, and a convergence band under a northerly wind. Such convergences are caused by the interaction between the mean wind and the local circulations forced by the curved thermal contrasts. The numerical results from the nonlinear model not only produce convergence patterns very similar to those found in the linear theory and in other numerical studies, but also capture the transient property in some of the lake-induced disturbances. All of these results are qualitatively confirmed by satellite images.

Hsu, Hsiao-Ming↗
NASA NTRS1985

The impact of mesoscale data on the simulation of a mesoscale convective weather system

The objectives are: (1) to demonstrate the sensitivity of a numerical simulation of a mesoscale convective weather system to the initial conditions; and (2) to provide further evidence of the need for a high resolution observing system that is compatible with numerical-model initial data requirements. To this end, a series of nine numerical-model sensitivity experiments were conducted in which one or more variables from one or more observations (soundings) were omitted and/or adjusted in the model initialization. Two types of surroundings were available for manipulation in the sensitivity experiments. Specifically, for the particular event being simulated (the 1977 Johnstown flash flood), an independent mesoanalysis was available from Bosart and Sanders (1981). In his analysis, Bosart produced a fine-resolution three-dimensional array of data from which soundings that helped to define mesoscale features could be extracted. These 'nonconventional' soundings were added to the conventional sounding data routinely available for model initialization.

Fritsch, J. M.↗
NASA NTRS2001

The Impact of TRMM Data on Mesoscale Numerical Simulation of Super Typhoon Paka

This paper assesses the impact of TRMM Microwave Imager (TMI) derived surface rainfall data on the numerical simulation of Super Typhoon Paka (1997). A series of mesoscale numerical simulations is conducted for simulating Super Typhoon Paka during its mature stage by using the Penn State/NCAR MM5 model with initial conditions derived from the Goddard Earth Observing System (GEOS) global analyses with and without assimilation of the TMI surface rainfall data. Simulation results clearly demonstrate that the GEOS analysis with TMI rainfall data leads to a improved MM5 simulation of Typhoon Paka in terms of its intensity and kinematical and precipitation structures, since inclusion of the rainfall data into initial and boundary condition improves the storm environmental conditions (e.g., moisture and circulation). Further improvement can also be obtained by incorporating TMI data with mesoscale bogus vortex information into the initial conditions.

Pu, Zhao-Xia↗
NASA NTRS1983

An evaluation of the synoptic- and mesoscale predictability of the Mesoscale Atmospheric Simulation System (MASS 2.0) model

A report is presented regarding the synoptic- and mesoscale predictive capabilities of a regional-scale numerical weather prediction model known as the Mesoscale Atmospheric Simulation System (MASS, Version 2.0). The development of this model has been discussed by Kaplan et al. (1982). An evaluation of the performance of MASS 2.0 is based on the study of a sample of approximately thirty 12 h and 24 h forecasts of atmospheric flow patterns over the U.S. during spring and early summer of 1982. A description of model systems is provided, and synoptic-scale evaluation methods are considered along with aspects of mesoscale evaluation methodology, examples of coherent mesoscale information provided by MASS 2.0, the results of a diagnostic study of mesoscale convective systems (MCS), and the results of a limited real-time forecast experiment.

Koch, S. E.↗
NASA NTRS1985

Results from a limited area mesoscale numerical simulation for 10 April 1979

Results are presented from a nine-hour limited area fine mesh (35-km) mesoscale model simulation initialized with SESAME-AVE I radiosonde data for Apr. 10, 1979 at 2100 GMT. Emphasis is on the diagnosis of mesoscale structure in the mass and precipitation fields. Along the Texas/Oklahoma border, independent of the short wave, convective precipitation formed several hours into the simulation and was organized into a narrow band suggestive of the observed April 10 squall line.

Kalb, M. W.↗
NASA NTRS1982

Initial results from a mesoscale atmospheric simulation system and comparisons with the AVE-SESAME I data set

The development of a comprehensive mesoscale atmospheric simulation system (MASS) is described in detail. The modeling system is designed for both research and real-time forecast applications. The 14-level numerical model, which has a 48 km grid mesh, can be run over most of North America and the adjacent oceanic regions. The model employs sixth-order accurate numerics, generalized similarity theory boundary-layer physics, a sophisticated cumulus parameterization scheme, and state of the art analysis and initialization techniques. Examples of model output on the synoptic and subsynoptic scales are presented for the AVE-SESAME I field experiment on 10-11 April 1979. The model output is subjectively compared to the observational analysis and the LFM II output on the synoptic scale. Subsynoptic model output is compared to analyses generated from the AVE-SESAME I data set.

Kaplan, M. L.↗
NASA NTRS1993

Magnetosheath-ionspheric plasma interactions in the cusp/cleft. 2: Mesoscale particle simulations

Ionospheric plasma flowing out from the cusp can be an important source of plasma to the magnetosphere. One source of free energy that can drive this outflow is the injection of magnetosheath plasma into the cusp. Two-dimensional (three velocity) mesoscale particle simulations are used to investigate the particle dynamics in the cusp during southward interplanetary magnetic field. This mesoscale model self-consistently incorporates (1) global influences such as the convection of plasma across the cusp, the action of the mirror force, and the injection of the magnetosheath plasma, and (2) wave-particle interactions which produce the actual coupling between the magnetosheath and ionospheric plasmas. It is shown that, because the thermal speed of the electrons is higher than the bulk motion of the magnetosheath plasma, an upward current is formed on the equatorward edge of the injection region with return currents on either side. However, the poleward return currents are the stronger due to the convection and mirroring of many of the magnetosheath electrons. The electron distribution in this latter region evolves from upward directed streams to single-sided loss cones or possibly electron conics. The ion distribution also shows a variety of distinct features that are produced by spatial and/or temporal effects associated with varying convection patterns and wave-particle interactions. On the equatorward edge the distribution has a downflowing magnetosheath component and an upflowing cold ionospheric component due to continuous convection of ionospheric plasma into the region. In the center of the magnetosheath region, heating from the development of an ion-ion streaming instability causes the suppression of the cold ionospheric component and the formation of downward ionospheric streams. Further poleward there is velocity filtering of ions with low pitch angles, so that the magnetosheath ions develop a ring-beam distribution and the ensuing wave instabilities generate downward ionospheric conics. These downward ionospheric components are eventually turned by the mirror force, leading to the production of upward conics at elevated energies throughout the region.

Winglee, R. M.↗
NASA NTRS1983

Evaluation of the synoptic and mesoscale predictive capabilities of a mesoscale atmospheric simulation system

The overall performance characteristics of a limited area, hydrostatic, fine (52 km) mesh, primitive equation, numerical weather prediction model are determined in anticipation of satellite data assimilations with the model. The synoptic and mesoscale predictive capabilities of version 2.0 of this model, the Mesoscale Atmospheric Simulation System (MASS 2.0), were evaluated. The two part study is based on a sample of approximately thirty 12h and 24h forecasts of atmospheric flow patterns during spring and early summer. The synoptic scale evaluation results benchmark the performance of MASS 2.0 against that of an operational, synoptic scale weather prediction model, the Limited area Fine Mesh (LFM). The large sample allows for the calculation of statistically significant measures of forecast accuracy and the determination of systematic model errors. The synoptic scale benchmark is required before unsmoothed mesoscale forecast fields can be seriously considered.

Koch, S. E.↗
NASA NTRS1989

A mesoscale numerical simulation of an index for use in the forecasting of the potential severity of wet microbursts

This paper demonstrates the feasibility of using the wet microburst potential intensity index developed by Proctor (1989) for predicting the onset of a wet microburst. After describing the index and the principles involved in its derivation, the version 4.0 of the Mesoscale Atmospheric Simulation System (MASS) model described by Karyampudi et al. (1988) was used to illustrate how the index would perform as a forecast product. An analysis is presented of the use of the microburst potential intensity index in the numerical simulation of the DFR aircraft accident on August 2, 1985 in a downburst environment.

Zack, John W.↗
DOE OSTI2024

Fully quantum algorithm for mesoscale fluid simulations with application to partial differential equations

Fluid flow simulations marshal our most powerful computational resources. In many cases, even this is not enough. Quantum computers provide an opportunity to speed up traditional algorithms for flow simulations. We show that lattice-based mesoscale numerical methods can be executed as efficient quantum algorithms due to their statistical features. This approach revises a quantum algorithm for lattice gas automata to reduce classical computations and state preparation at every time step. For this, the algorithm approximates the qubit relative phases and subtracts them at the end of each time step. Phases are evaluated using the iterative phase estimation algorithm and subtracted using single-qubit rotation phase gates. Further, this method optimizes the quantum resource required and makes it more appropriate for near-term quantum hardware. We also demonstrate how the checkerboard deficiency that the D1Q2 scheme presents can be resolved using the D1Q3 scheme. The algorithm is validated by simulating two canonical partial differential equations: the diffusion and Burgers' equations on different quantum simulators. We find good agreement between quantum simulations and classical solutions for the presented algorithm.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2005

The 0.125 degree finite-volume General Circulation Model on the NASA Columbia Supercomputer: Preliminary Simulations of Mesoscale Vortices

The NASA Columbia supercomputer was ranked second on the TOP500 List in November, 2004. Such a quantum jump in computing power provides unprecedented opportunities to conduct ultra-high resolution simulations with the finite-volume General Circulation Model (fvGCM). During 2004, the model was run in realtime experimentally at 0.25 degree resolution producing remarkable hurricane forecasts [Atlas et al., 2005]. In 2005, the horizontal resolution was further doubled, which makes the fvGCM comparable to the first mesoscale resolving General Circulation Model at the Earth Simulator Center [Ohfuchi et al., 2004]. Nine 5-day 0.125 degree simulations of three hurricanes in 2004 are presented first for model validation. Then it is shown how the model can simulate the formation of the Catalina eddies and Hawaiian lee vortices, which are generated by the interaction of the synoptic-scale flow with surface forcing, and have never been reproduced in a GCM before.)

Shen, B.-W.↗
NASA NTRS2012

Estimation of Eddy Dissipation Rates from Mesoscale Model Simulations

The Eddy Dissipation Rate is an important metric for representing the intensity of atmospheric turbulence and is used as an input parameter for predicting the decay of aircraft wake vortices. In this study, the forecasts of eddy dissipation rates obtained from the current state-of-the-art mesoscale model are evaluated for terminal area applications. The Weather Research and Forecast mesoscale model is used to simulate the planetary boundary layer at high horizontal and vertical mesh resolutions. The Bougeault-Lacarrer and the Mellor-Yamada-Janji schemes implemented in the Weather Research and Forecast model are evaluated against data collected during the National Aeronautics and Space Administration s Memphis Wake Vortex Field Experiment. Comparisons with other observations are included as well.

Ahmad, Nashat N.↗
NASA NTRS1997

Global MHD Simulation of Mesoscale Structures at the Magnetospheric Boundary

We have continued our modeling of the solar wind/magnetosphere interaction for steady solar Wind conditions by carrying out a series of 3 D global magneto-hydrodynamics (MHD) simulations using a set of predetermined solar wind parameters as input to the code. With the results from the simulations that we ran last year for two other dipole tilts (0 and 35 deg), we have 36 data sets to study the dynamics of mesoscale structures at the magnetospheric boundary. We have started the analysis of these runs to investigate geometrical properties and the topology of the magnetic and electric fields for the different solar wind regimes and orientations considered. Preliminary results indicate that merging sites are consistent with patterns proposed for antiparallel merging at the dayside magnetopause. Another goal of this investigation is to establish the displacement of the cusp region as a function of the solar wind dynamic pressure, IMF direction and magnetic field dipole tilt. One of the difficulties of that study is to locate precisely the cusp in the simulation results. We have used several case studies to establish a series of criteria in to permit a routine identification of that location. We need now to process the rest of the simulation results using these criteria to obtain statistical results.

Berchem, Jean↗
DOE OSTI2022

“Gray Zone” Simulations Using a Three-Dimensional Planetary Boundary Layer Parameterization in the Weather Research and Forecasting Model

Abstract Generating accurate weather forecasts of planetary boundary layer (PBL) properties is challenging in many geographical regions, oftentimes due to complex topography or horizontal variability in, for example, land characteristics. While recent advances in high-performance computing platforms have led to an increase in the spatial resolution of numerical weather prediction (NWP) models, the horizontal gridcell spacing (Δ x ) of many regional-scale NWP models currently fall within or are beginning to approach the gray zone (i.e., Δ x ≈ 100–1000 m). At these gridcell spacings, three-dimensional (3D) effects are important, as the most energetic turbulent eddies are neither fully parameterized (as in traditional mesoscale simulations) nor fully resolved [as in traditional large-eddy simulations (LES)]. In light of this modeling challenge, we have implemented a 3D PBL parameterization for high-resolution mesoscale simulations using the Weather Research and Forecasting Model. The PBL scheme, which is based on the algebraic model developed by Mellor and Yamada, accounts for the 3D effects of turbulence by calculating explicitly the momentum, heat, and moisture flux divergences in addition to the turbulent kinetic energy. In this study, we present results from idealized simulations in the gray zone that illustrate the benefit of using a fully consistent turbulence closure framework under convective conditions. While the 3D PBL scheme reproduces the evolution of convective features more appropriately than the traditional 1D PBL scheme, we highlight the need to improve the turbulent length scale formulation. Significance Statement The spatial resolution of weather models continues to increase at a rapid rate in accordance with the enhancement of computing power. As a result, smaller-scale atmospheric features become more explicitly resolved. However, most numerical models still ignore the impact of horizontal weather variations on boundary layer flows, which becomes more important at these smaller spatial scales. To address this issue, we have implemented a new modeling approach, using fundamental principles, which accounts for horizontal variability. Our results show that including three-dimensional effects of turbulence is necessary to achieve realistic boundary layer characteristics. This novel technique may be useful for many applications including complex terrain flows, pollutant dispersion, and surface–atmosphere interaction studies.

Juliano, Timothy W.↗
NASA NTRS1999

The Impact of TRMM on Mesoscale Model Simulation of Super Typhoon Paka

Tropical cyclone Paka formed during the first week of December 1997 and underwent three periods of rapid intensification over the following two weeks. During one of these periods, which initiated early on December 10, Paka's Dvorak-measured windspeed increased from 23 to 60 m/s over a 48-hr period. On December 18, during the last rapid deepening episode, Paka became a supertyphoon with a maximum wind speed of about 80 m/s. In this study, the Penn State/NCAR Mesoscale Model (MM5) with improved physics (i.e., cloud microphysics, radiation, land-soil-vegetation-surface processes, and TOGA COARE flux scheme) and a multiple level nesting technique (135, 45 and 15 km horizontal resolution) will be used to simulate supertyphoon Paka. We performed two runs initialized with Goddard Earth Observing System (GEOS) data sets. The first GEOS data set does not incorporate either TRMM (tropical rainfall measuring mission satellite) or SSM/I (sensor microwave imager) observed rainfall fields into the GEOS's assimilation system while the second one does. Preliminary results show that the MM5 simulated surface pressure deepened by more than 25 mb (45 km resolution domain) in the run initialized with the GEOS data set incorporating TRMM and SSM/I derived rainfall, compared to the one initialized without. However, the track and precipitation patterns are quite similar between the runs. In our presentation, we will show the impact of TRMM rainfall upon the MM5 simulation of Paka at various horizontal resolutions. We will also examine the physical processes associated with initial explosive development by comparing MM5 simulated rainfall and latent heat release. In addition, budget (vorticity, PV, momentum and heat) calculations and sensitivity tests will be performed to examine the upper-tropospheric and SST mechanisms responsible for the explosive development of Paka.

Tao, W.-K.↗
DOE OSTI2021

Impact of a New Cloud Microphysics Parameterization on the Simulations of Mesoscale Convective Systems in E3SM

Abstract Mesoscale convective systems (MCSs) are one of the most climatically significant forms of convection because of their large role in water and energy cycles. The mesoscale features associated with MCS are difficult to represent in climate models because the relevant dynamics and physics are absent or poorly represented with coarse model resolution (∼100 km). Using a regionally refined model (RRM) with 0.25° grid spacing embedded in the Energy Exascale Earth System Model (E3SM), we explore the impact of cloud microphysics parameterizations on the simulation of precipitation, particularly MCS precipitation over the contiguous United States. The Predicted Particle Properties (P3) cloud microphysics scheme has been modified and implemented into E3SM to overcome the limitations of the default Morrison and Gettelman (MG2) scheme in which rimed precipitating ice particles (graupel/hail) are absent and frozen particles are artificially partitioned into cloud ice and snow. We show that P3 improves the simulation of precipitation statistics including frequency distribution compared with MG2 with a limited effect on the diurnal cycle. P3 predicts higher hourly rain rates, resulting in 20% more MCSs and a higher total MCS precipitation (4.4%) compared to MG2, agreeing better with observations. The improvements with P3 mainly result from improved representations of ice microphysics, which not only produces higher rain rates through melting but also leads to a stronger large‐scale ascending motion by releasing more latent heating. This study suggests that improving microphysics parameterization is important for simulating MCS precipitation as future climate model resolutions continue to increase.

54 ENVIRONMENTAL SCIENCES↗