Search NASA⌕ Search

SEARCH · Search NASA

Results for “microwave processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2009

Using Microwaves for Extracting Water from the Moon

This disk contains a video that accompanies the talk. Twenty years ago, the Lunar Prospector remote sensing satellite provided evidence of relatively large hydrogen concentrations at the lunar poles and in particular concentrated in permanently shadowed craters. The scientific hypothesis is that the hydrogen is in the form of cryo-trapped water just under the surface of the soil. If true this would mean that an average of about 2% water ice is mixed with the lunar soil existing in the form of ice at cryogenic temperatures. For 5 years we have been investigating the use of microwaves for the processing of lunar soil. One of the early uses could be to use microwave energy to extract volatiles and in particular water from the lunar permafrost. Prototype experiments have shown that microwave energy at 2.45 GHz, as in consumer microwave ovens, will couple with and heat cryogenically cooled lunar soil permafrost simulant, resulting in the rapid sublimation of water vapor into the vacuum chamber. The water vapor has been collected on a cryogenic cold trap with high efficiency. The primary advantage of microwave processing is that the volatiles can be extracted in situ. Excavation would not be required. Microwave frequency dielectric property measurements are being made of different lunar soil simulants and plans are to measure Apollo lunar soil at different frequencies and over a range of temperatures. The materials properties are being used to evaluate the heating of lunar soil and develop COMSOL models that can be used to evaluate different microwave extraction scenarios. With COMSOL the heating from cryogenic temperatures can be calculated and COMSOL will permit temperature dependent materials properties to be used during the heating process. Calculations at different microwave frequencies will allow the evaluation of the type of hardware that would be needed to most efficiently extract the water and other volatiles. The video shows the partial results of the COMSOL modeling.

Ethridge, Edwin C.↗
NASA NTRS2009

Using Microwaves for Extracting Water from the Moon

This disk contains 2 videos that accompanies the talk. Twenty years ago, the Lunar Prospector remote sensing satellite provided evidence of relatively large hydrogen concentrations at the lunar poles and in particular concentrated in permanently shadowed craters. The scientific hypothesis is that the hydrogen is in the form of cryo-trapped water just under the surface of the soil. If true this would mean that an average of about 2% water ice is mixed with the lunar soil existing in the form of ice at cryogenic temperatures. For 5 years we have been investigating the use of microwaves for the processing of lunar soil. One of the early uses could be to use microwave energy to extract volatiles and in particular water from the lunar permafrost. Prototype experiments have shown that microwave energy at 2.45 GHz, as in consumer microwave ovens, will couple with and heat cryogenically cooled lunar soil permafrost simulant, resulting in the rapid sublimation of water vapor into the vacuum chamber. The water vapor has been collected on a cryogenic cold trap with high efficiency. The primary advantage of microwave processing is that the volatiles can be extracted in situ. Excavation would not be required. Microwave frequency dielectric property measurements are being made of different lunar soil simulants and plans are to measure Apollo lunar soil at different frequencies and over a range of temperatures. The materials properties are being used to evaluate the heating of lunar soil and develop COMSOL models that can be used to evaluate different microwave extraction scenarios. With COMSOL the heating from cryogenic temperatures can be calculated and COMSOL will permit temperature dependent materials properties to be used during the heating process. Calculations at different microwave frequencies will allow the evaluation of the type of hardware that would be needed to most efficiently extract the water and other volatiles. The 1st video shows the results of the COMSOL models. The second video shows brief views of the lunar surface.

Ethridge, Edwin C.↗
NASA NTRS1996

A New Class Of Opto-Electronic Oscillators (OEO) for Microwave Signal Generation and Processing

A new class of oscillators based on photonic devices is presented. These opto-electronic oscillators (OEO's) generate microwave oscillation by converting continuous energy from a light source using a feedback circuit which includes a delay element, and electro-optic switch, and a photodetector. Different configurations of OEO's are presented, each of which may be applied to a particular application requiring ultra-high performance, or low cost and small size.

oscillators↗
NASA NTRS1981

One-step microwave foaming and curing

Process that combines microwave foaming and curing of polyimide precursors in single step produces fire-resistant foam slabs of much larger volume than has previously been possible. By adding selected conductive fillers to powder precursors and by using high-power microwave oven, foam slabs with dimensions in excess of 61 by 61 by 7.6 cm are made. Typical foaming and curing and curing time is 35 minutes in microwave oven with additional 1 to 2 hour postcure in conventional oven.

Gagliani, J.↗
NASA NTRS1988

Observations and interpretation of solar flares at microwave frequencies

The physical processes responsible for microwave emission in solar flares are outlined, and examples of how microwave observations have been interpreted in terms of physical parameters are described. Selected results obtained during Solar Cycle 21 with the microwave observatories dedicated to synoptic observations of the sun are summarized. The status and future plans for these facilities at Bern and in Japan are presented. Also discussed are the instrument capabilities required at microwave frequencies to achieve the objectives of a future facility for high-energy solar physics.

Crannell, C. J.↗
NASA NTRS1993

Arctic sea ice microwave signature and geophysical processes study

Studies on the validation and utilization of ERS-1 SAR (Synthetic Aperture Radar) derived liquid and solid ocean information and the study of the interregional, regional, and temporal variation of the microwave signatures of sea ice and snow, are reported. Initial interests are focused on the accuracy of the estimates of ice type, ice form, deformation state, or thickness, and the ability to retrieve ice physical property information. Two in situ campaigns were conducted for the purpose of 'truth' ERS-1 SAR products and to gather data in support of the above science studies.

Onstott, Robert G.↗
NASA NTRS1972

Extragalactic X-ray sources.

The extended X-ray sources associated with the Virgo, Perseus, and Coma clusters of galaxies can best be explained as a result of the Compton scattering of relativistic electrons (generated in the radio sources which are present in each of these clusters) on the microwave background radiation. The same physical process involving microwave infrared or optical photons generated in the nuclei of active galaxies may account for the more compact X-ray sources. Thermal bremsstrahlung of hot gas in clusters of galaxies is a less likely source of X-rays.

Brecher, K.↗
NASA NTRS2013

Method for Processing Lunar Regolith Using Microwaves

A paper describes a method of using microwave heating experiments on lunar simulants to determine the mechanism that causes lunar regolith to be such an excellent microwave absorber. The experiments initially compared the effects of sharp particle edges to round particle edges on the heating curves. For most compositions, sharp particle edged samples were more effective in being heated by microwaves than round particle edged materials. However, the experiments also showed an unexpected effect for both types of particles. Upon heating the sample surface above 400 C, the sample experienced some sort of internal structure change that caused it to heat much more efficiently. This enhancement may be associated with the unique microwave volumetric heating that can produce a large temperature gradient within the sample leading to melting of some components at the center of the sample. This new effect that may also be happening in lunar regolith samples is probably the cause of the previously observed enhanced heating of a sample of lunar regolith. Properly designed microwave applicators could heat and solidify the lunar regolith to form roads and building blocks for structures needed on the Moon

Barmatz, Martin B.↗
NASA NTRS2018

Observing Fast Mesoscale Atmospheric Processes with a Geostationary Microwave Sounder

A geostationary microwave sounder, GeoSTAR, capable of providing continuous monitoring every 15 minutes of atmospheric temperature, water vapor, clouds, precipitation, and wind in the presence of clouds and precipitation, which will add tremendously to our ability to observe rapidly evolving dynamic atmospheric phenomena, such as hurricanes and severe storms, monsoonal moisture flow, and atmospheric rivers, has been developed at the Jet Propulsion Laboratory. GeoSTAR uses aperture synthesis to overcome the difficulty of attaining adequate spatial resolution from geostationary orbit. It is made possible with new technology that has now been developed and fully tested. Low-risk mission development can start as soon as funding becomes available. The sensor can be hosted on a commercial communications satellite, which could reduce the cost substantially. Plans have been developed at JPL for such a mission, called “GeoStorm”, focused on observing severe convective storms – tropical cyclones, mesoscale convective systems, and extratropical cyclones – with a goal of improving our understanding, modeling and prediction of these destructive phenomena. It can equally well be configured as an operational mission, where the goal is to collect data for immediate assimilation into regional forecast systems, provide “now-casting” as the storms unfold, and support post-disaster relief and recovery efforts. With key observables including vertical profiles of temperature, water vapor, wind and precipitation over a wide area, many focused applications are possible, particularly pertaining to aviation, transportation and marine operations, in both the civilian and defense domains.

Lambrigsten, Bjorn↗
NASA NTRS1993

Microwave Pretreatment For Hydrolysis Of Cellulose

Microwave pretreatment enhances enzymatic hydrolysis of cellulosic wastes into soluble saccharides used as feedstocks for foods, fuels, and other products. Low consumption of energy, high yield, and low risk of proposed hydrolysis process incorporating microwave pretreatment makes process viable alternative to composting.

Cullingford, Hatice S.↗
NASA NTRS1976

Investigation of a Real-time Processing System for the NASA Multifrequency Microwave Radiometer

A study was conducted to investigate the data reduction and processing requirements for the multifrequency microwave radiometer system (MFMR). The objectives were to develop and evaluate algorithms and processing techniques which might provide for dedicated real time or near real time data processing and to develop a configuration design and processor recommendation to accomplish the data reduction. An analysis of the required data reduction and calibration equations was included along with the identification of sources of error which may be present in the (MFMR) data. The definition and evaluation of the significance of effects introduced by aircraft perturbation was given.

Source record↗
NASA NTRS2008

Five-Year Wilkinson Microwave Anisotropy Probe (WMAP) Observations: Data Processing, Sky Maps, and Basic Results

The Wilkinson Microwave Anisotropy Probe (WMAP) is a Medium-Class Explorer (MIDEX) satellite aimed at elucidating cosmology through full-sky observations of the cosmic microwave background (CMB). The WMAP full-sky maps of the temperature and polarization anisotropy in five frequency bands provide our most accurate view to date of conditions in the early universe. The multi-frequency data facilitate the separation of the CMB signal from foreground emission arising both from our Galaxy and from extragalactic sources. The CMB angular power spectrum derived from these maps exhibits a highly coherent acoustic peak structure which makes it possible to extract a wealth of information about the composition and history of the universe. as well as the processes that seeded the fluctuations. WMAP data have played a key role in establishing ACDM as the new standard model of cosmology (Bennett et al. 2003: Spergel et al. 2003; Hinshaw et al. 2007: Spergel et al. 2007): a flat universe dominated by dark energy, supplemented by dark matter and atoms with density fluctuations seeded by a Gaussian, adiabatic, nearly scale invariant process. The basic properties of this universe are determined by five numbers: the density of matter, the density of atoms. the age of the universe (or equivalently, the Hubble constant today), the amplitude of the initial fluctuations, and their scale dependence. By accurately measuring the first few peaks in the angular power spectrum, WMAP data have enabled the following accomplishments: Showing the dark matter must be non-baryonic and interact only weakly with atoms and radiation. The WMAP measurement of the dark matter density puts important constraints on supersymmetric dark matter models and on the properties of other dark matter candidates. With five years of data and a better determination of our beam response, this measurement has been significantly improved. Precise determination of the density of atoms in the universe. The agreement between the atomic density derived from WMAP and the density inferred from the deuterium abundance is an important test of the standard big bang model. Determination of the acoustic scale at redshift z = 1090. Similarly, the recent measurement of baryon acoustic oscillations (BAO) in the galaxy power spectrum (Eisenstein et al. 2005) has determined the acoustic scale at redshift z approx. 0.35. When combined, these standard rulers accurately measure the geometry of the universe and the properties of the dark energy. These data require a nearly flat universe dominated by dark energy consistent with a cosmological constant. Precise determination of the Hubble Constant, in conjunction with BAO observations. Even when allowing curvature (Omega(sub 0) does not equal 1) and a free dark energy equation of state (w does not equal -1), the acoustic data determine the Hubble constant to within 3%. The measured value is in excellent agreement with independent results from the Hubble Key Project (Freedman et al. 2001), providing yet another important consistency test for the standard model. Significant constraint of the basic properties of the primordial fluctuations. The anti-correlation seen in the temperature/polarization (TE) correlation spectrum on 4deg scales implies that the fluctuations are primarily adiabatic and rule out defect models and isocurvature models as the primary source of fluctuations (Peiris et al. 2003).

Weiland, J.L.↗
NASA NTRS2010

Five-Year Wilkinson Microwave Anisotropy Probe Observations: Data Processing, Sky Maps, and Basic Results

We present new full-sky temperature and polarization maps in five frequency bands from 23 to 94 GHz, based on data from the first five years of the Wilkinson Microwave Anisotropy Probe (WMAP) sky survey. The new maps are consistent with previous maps and are more sensitive. The five-year maps incorporate several improvements in data processing made possible by the additional years of data and by a more complete analysis of the instrument calibration and in-flight beam response. We present several new tests for systematic errors in the polarization data and conclude that W-band polarization data is not yet suitable for cosmological studies, but we suggest directions for further study. We do find that Ka-band data is suitable for use; in conjunction with the additional years of data, the addition of Ka band to the previously used Q- and V-band channels significantly reduces the uncertainty in the optical depth parameter, tau. Further scientific results from the five-year data analysis are presented in six companion papers and are summarized in Section 7 of this paper. With the five-year WMAP data, we detect no convincing deviations from the minimal six-parameter ACDM model: a flat universe dominated by a cosmological constant, with adiabatic and nearly scale-invariant Gaussian fluctuations. Using WMAP data combined with measurements of Type Ia supernovae and Baryon Acoustic Oscillations in the galaxy distribution, we find (68% CL uncertainties): OMEGA(sub b)h(sup 2) = 0.02267(sup +0.00058)(sub -0.00059), OMEGA(sub c)h(sup 2) = 0.1131 plus or minus 0.0034, OMEGA(sub logical and) = 0.726 plus or minus 0.015, ns = .960 plus or minus 0.013, tau = 0.84 plus or minus 0.016, and DELTA(sup 2)(sub R) = (22.445 plus or minus 0.096) x 10(exp -9) at k = 0.002 Mpc(exp -1). From these we derive sigma(sub 8) = 0.812 plus or minus 0.026, H(sub 0) = 70.5 plus or minus 1.3 kilometers per second Mpc(exp -1), OMEGA(sub b) = 0.0456 plus or minus 0.0015, OMEGA(sub c) = .228 plus or minus 0.013, OMEGA(sub m)h(sup 2) = 0.1358(sup +0.0037)(sub -0.0036), z reion = 10.9 plus or minus 1.4, and t(sub 0) = 13.72 plus or minus 0.12 Gyr. The new limit on the tensor-to-scalar ration is r less than 0.22 (95% CL), while the evidence for a running spectral index is insignificant, dn(sub s)/d ln k = -0.028 plus or minus 0.020 (68% CL). We obtain tight, simultaneous limits on the (constant) dark energy equation of state and the spatial curvature of the universe: -0.14 less than 1 + w less than 0.12 (95% CL) and -0.0179 less than OMEGA(sub k) less than 0.0081 (95% CL). The number of relativistic degrees of freedom, expressed in units of the effective number of neutrino species, is found to be N(sub eff) = 4.4 plus or minus 1.5 (69% CL), consistent with the standard value of 3.04. Models with N(sub eff) = 0 are disfavored at greater than 99% confidence. Finally, new limits on physically motivated primordial non-Gaussianity parameters are -9 less than f(sup local)(sub NL) less than 111 (95% CL) and -151 less than f(sup equal)(sub NL) less than 253 (95% CL) for the local and equilateral models, respectively.

Hinshaw, G.↗
NASA NTRS1981

Rigid fire-resistant foams for walls and floors

Previous techniques for fabricating rigid fire-resistant polyimide foams by compressing already-foamed precursor have been supplanted by one-step constrained-rise process. Precursor mixed with reinforcing fillers is placed between rigid substrates that constrain expansion of foam as it is heated by microwave energy. Process works for both liquid and powder precursors and can also be adapted to attach woven fiberglass skins at same time prcursor is being foamed.

Gagliani, J.↗