Search NASA⌕ Search

SEARCH · Search NASA

Results for “mismatch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Radiation of cylindrical duct acoustic modes with flow mismatch

Calculations for the radiation of spinning acoustic modes, with or without a centerbody, and with or without flow temperature and velocity discontinuity, are presented. Solutions to the appropriate convected wave equations devised around Fourier transforms and Wiener-Hopf technique are presented. The decomposition of the asymmetric kernel, resulting from a flow and temperature mismatch, is carried out in part exactly and partially using the so-called Carrier-Koiter approximation procedure. The resulting solutions offer a good approximation to the radiation of both symmetric and asymmetric modes through a flow discontinuity represented as a plug flow jet issuing from a cylindrical duct. Besides the Koiter approximation, the major limitation on the calculation program is the difficulty of calculating the high order Bessel functions with sufficient accuracy.

Savkar, S. D.↗
NASA NTRS1976

Errors in short circuit measurements due to spectral mismatch between sunlight and solar simulators

Errors in short circuit current measurement were calculated for a variety of spectral mismatch conditions. The differences in spectral irradiance between terrestrial sunlight and three types of solar simulator were studied, as well as the differences in spectral response between three types of reference solar cells and various test cells. The simulators considered were a short arc xenon lamp AMO sunlight simulator, an ordinary quartz halogen lamp, and an ELH-type quartz halogen lamp. Three types of solar cells studied were a silicon cell, a cadmium sulfide cell and a gallium arsenide cell.

Curtis, H. B.↗
NASA NTRS1977

Effect of discontinuities as a means to alleviate thermal expansion mismatch damage in laminar composites

An investigation of Nichrome/tungsten laminar composites showed that intentionally introduced discontinuities, such as perforations through or grooves on the surface of the matrix laminae, improved thermal expansion mismatch damage resistance. It was found that specimens having smooth matrix laminate surfaces were virtually destroyed by delamination in 21 or fewer fast cool cycles in which they were water quenched from 981 C. Specimens having interior matrix laminae with discontinuities and relatively thin, nondiscontinuous, surface matrix laminae resisted 50 similar cycles without evident delamination damage.

Hoffman, C. A.↗
NASA NTRS1979

Performance of mismatched Viterbi receiver on satellite channels

This paper presents an analysis of a satellite communication system using a Viterbi receiver. Here we have a bandlimited nonlinear channel where both uplink and downlink are taken into account as well as the effect of Intersymbol Interference, phase and time synchronization errors. In order that ISI can be combatted effectively, we use a Viterbi demodulator which is designed for the satellite channel when there is no uplink noise. The Viterbi demodulator for the channels with large memory is too complex to be implemented. To reduce the complexity, a Viterbi demodulator with memory shorter than the true channel memory is used. The objective of this paper is to analyze the performance degradation of this 'Mismatched Viterbi Receiver' due to the uplink noise and memory truncation, and to understand how the time and phase synchronization errors influence the performance.

Divsalar, D.↗
NASA NTRS1982

Visual/motion cue mismatch during a coordinated roll maneuver

The effect of a performance mismatch between the simulator visual and motion display systems on pilot performance while engaged in a compensatory tracking task, and the effect of a reduction in simulator motion scaling while maintaining constant visual scaling on pilot performance for this same task were investigated. A jet transport aircraft with motion in the roll and lateral simulator axes was used as a test vehicle for a computer simulation. The aircraft was disturbed by moderate levels of turbulence which resulted in flight path deviations in the roll and lateral axes. The task of the pilot was to maintain flight formation behind the aircraft in front of him as displayed by a video monitor located in the simulator cockpit. Experimental data consisting of pilot describing functions and pilot performance scores are presented and discussed as they relate to experimental evidence.

Shirachi, D. K.↗
NASA NTRS1987

Absolute gain measurement by the image method under mismatched condition

Purcell's image method for measuring the absolute gain of an antenna is particularly attractive for small test antennas. The method is simple to use and utilizes only one antenna with a reflecting plane to provide an image for the receiving antenna. However, the method provides accurate results only if the antenna is matched to its waveguide. In this paper, a waveguide junction analysis is developed to determine the gain of an antenna under mismatched condition. Absolute gain measurements for two standard gain horn antennas have been carried out. Experimental results agree closely with published data.

Lee, Richard Q.↗
NASA NTRS1988

Absolute gain measurement of microstrip antennas under mismatched conditions

The gain of a single microstrip patch and a two-layer parasitic array is measured using the image method under mismatched conditions. This method produces accurate results, even in the case of low-gain microstrip antennas. The advantages of this method over the gain comparison technique are discussed.

Lee, R. Q.↗
NASA NTRS1986

A study on thermal barrier coatings including thermal expansion mismatch and bond coat oxidation

The present investigation deals with a plasma-sprayed thermal barrier coating (TBC) intended for high temperature applications to advanced gas turbine blades. Typically, this type of coating system consists of a zirconia-yttria ceramic layer with a nickel-chromium-aluminum bond coat on a superalloy substrate. The problem on hand is a complex one due to the fact that bond coat oxidation and thermal mismatch occur in the TBC. Cracking in the TBC has also been experimentally illustrated. A clearer understanding of the mechanical behavior of the TBC is investigated. The stress states in a model thermal barrier coating as it cools down in air is studied. The powerful finite element method was utilized to model a coating cylindrical specimen. Four successively refined finite element models were developed. Some results obtained using the first two models have been reported previously. The major accomplishment is the successful development of an elastic TBC finite element model known as TBCG with interface geometry between the ceramic layer and the bond coat. An equally important milestone is the near-completion of the new elastic-plastic TBC finite element model called TBCGEP which yielded initial results. Representative results are presented.

Chang, George C.↗
NASA NTRS1993

Stresses In A Cylinder Welded With Mismatch

NASA technical memorandum presents parametric study of additional stresses introduced into cylindrical pressure vessel that is round except for radial mismatch in longitudinal butt weld in sidewall. Prompted by concern over fatigue caused by cyclic stresses in longitudinally welded cylindrical titanium inlet of high-pressure turbopump in main engine of Space Shuttle. Results applicable to any round cylindrical pressure vessel characterized by parameters, and conform to simplifying assumptions, used in analysis.

Min, J. B.↗
NASA NTRS2001

Autofrettage to Counteract Coefficient of Thermal Expansion Mismatch in Cryogenic Pressurized Pipes with Metallic Liners

Composite feedlines with metal liners have the potential to reduce weight/cost while providing the same level of permeation resistance and material compatibility of all-metal feedlines carrying cryogenic propellants in spacecraft. The major technical challenges are the large difference in Coefficient of Thermal Expansion between the liner and the composite, and the manufacturing method required to make a very thin liner with the required strength and dimensional tolerance. This study investigates the use of autofrettage (compressive preload) to counteract Coefficient of Thermal Expansion when pre-pressurization procedures cannot be used to solve this problem. Promising materials (aluminum 2219, Inconel 718, nickel, nickel alloy) and manufacturing techniques (chemical milling, electroplating) are evaluated to determine the best liner candidates. Robust, autofrettaged feedlines with a low Coefficient of Thermal Expansion liner (Inconel 718 or nickel alloy) are shown to successfully counteract mismatch at LOX temperature. A new concept, autofrettage by temperature, is introduced for high Coefficient of Thermal Expansion materials (aluminum and pure nickel) where pressure cannot be used to add compressive preload.

Wen, Ed↗
NASA NTRS2003

Microsatellites in the Eukaryotic DNA Mismatch Repair Genes as Modulators of Evolutionary Mutation Rate

All "minor" components of the human DNA mismatch repair (MMR) system-MSH3, MSH6, PMS2, and the recently discovered MLH3-contain mononucleotide microsatellites in their coding sequences. This intriguing finding contrasts with the situation found in the major components of the DNA MMR system-MSH2 and MLH1-and, in fact, most human genes. Although eukaryotic genomes are rich in microsatellites, non-triplet microsatellites are rare in coding regions. The recurring presence of exonal mononucleotide repeat sequences within a single family of human genes would therefore be considered exceptional.

Chang, Dong Kyung↗
NASA NTRS2017

Thermal Protection Supplement for Reducing Interface Thermal Mismatch

A thermal protection system that reduces a mismatch of thermal expansion coefficients CTE between a first material layer (CTE1) and a second material layer (CTE2) at a first layer-second layer interface. A portion of aluminum borosilicate (abs) or another suitable additive (add), whose CTE value, CTE(add), satisfies (CTE(add)-CTE1)(CTE(add)-CTE2)<0, is distributed with variable additive density,.rho.(z;add), in the first material layer and/or in the second material layer, with.rho.(z;add) near the materials interface being relatively high (alternatively, relatively low) and.rho.(z;add) in a region spaced apart from the interface being relatively low (alternatively, relatively high).

Stewart, David A.↗