Search NASA⌕ Search

SEARCH · Search NASA

Results for “mobility data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Livewire Data Platform - A Solution for Energy Efficient Mobility Systems (EEMS) Data Sharing

The Livewire Data Platform is a data storage and exchange platform. It provides: a platform, allowing data sharing and discovery by linking disparate data sources to a single website via application programming interfaces (APIs); a community, building partnerships and collaboration rather than competition; a system, allowing shared data to increase in size and complexity as EEMS evolves.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Revisiting matrix-based inversion of scanning mobility particle sizer (SMPS) and humidified tandem differential mobility analyzer (HTDMA) data

Abstract. Tikhonov regularization is a tool for reducing noise amplification during data inversion. This work introduces RegularizationTools.jl, a general-purpose software package for applying Tikhonov regularization to data. The package implements well-established numerical algorithms and is suitable for systems of up to ∼ 1000 equations. Included is an abstraction to systematically categorize specific inversion configurations and their associated hyperparameters. A generic interface translates arbitrary linear forward models defined by a computer function into the corresponding design matrix. This obviates the need to explicitly write out and discretize the Fredholm integral equation, thus facilitating fast prototyping of new regularization schemes associated with measurement techniques. Example applications include the inversion involving data from scanning mobility particle sizers (SMPSs) and humidified tandem differential mobility analyzers (HTDMAs). Inversion of SMPS size distributions reported in this work builds upon the freely available software DifferentialMobilityAnalyzers.jl. The speed of inversion is improved by a factor of ∼ 200, now requiring between 2 and 5 ms per SMPS scan when using 120 size bins. Previously reported occasional failure to converge to a valid solution is reduced by switching from the L-curve method to generalized cross-validation as the metric to search for the optimal regularization parameter. Higher-order inversions resulting in smooth, denoised reconstructions of size distributions are now included in DifferentialMobilityAnalyzers.jl. This work also demonstrates that an SMPS-style matrix-based inversion can be applied to find the growth factor frequency distribution from raw HTDMA data while also accounting for multiply charged particles. The outcome of the aerosol-related inversion methods is showcased by inverting multi-week SMPS and HTDMA datasets from ground-based observations, including SMPS data obtained at Bodega Marine Laboratory during the CalWater 2/ACAPEX campaign and co-located SMPS and HTDMA data collected at the US Department of Energy observatory located at the Southern Great Plains site in Oklahoma, USA. Results show that the proposed approaches are suitable for unsupervised, nonparametric inversion of large-scale datasets as well as inversion in real time during data acquisition on low-cost reduced-instruction-set architectures used in single-board computers. The included software implementation of Tikhonov regularization is freely available, general, and domain-independent and thus can be applied to many other inverse problems arising in atmospheric measurement techniques and beyond.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Temperature and composition dependent screw dislocation mobility in austenitic stainless steels from large-scale molecular dynamics

Abstract Extensive molecular dynamics simulations are performed to determine screw dislocation mobility in austenitic Fe 0.7 Ni x Cr 0.3-x stainless steels as a function of temperature ranging from 100 to 1300 K, resolved shear stress from 30 to 140 MPa, and Ni composition from 0.0 to 30.0 at%. These mobility data are fitted to a linear mobility law with a nonzero stress offset, referred to as the threshold stress. We find that both the linear drag coefficient and the threshold stress increase with Ni composition. The drag coefficient increases with temperature, whereas the threshold stress decreases with temperature. Based on these calculations, we determine fitting functions for the linear solute drag coefficient as a function of temperature and composition. The mobility laws determined in this study may serve to inform dislocation dynamics simulations pertinent to dislocation network evolution at elevated temperatures for a wide composition range of austenitic stainless steels.

Chu, Kevin (ORCID:000000031929710X)↗
DOE OSTI2026

JANUS: Resilient and Adaptive Data Transmission for Enabling Timely and Efficient Cross-Facility Scientific Workflows

In modern science, the growing complexity of large-scale scientific projects has led to an increasing reliance on cross-facility scientific workflows, where resources and expertise from multiple institutions and geographic locations are leveraged to accelerate scientific discovery. These workflows often require transmitting huge amounts of scientific data through wide-area networks. Although high-speed networks like ESnet and transfer services such as Globus have improved data mobility, several challenges remain. The sheer volume of data can overwhelm network bandwidth, widely used transport protocols such as TCP suffer from inefficiencies due to retransmissions triggered by packet loss, and existing fault-tolerance mechanisms like erasure coding introduce substantial overhead. In this paper, we propose Janus, a resilient and adaptable data transmission approach designed for cross-facility scientific workflows. Unlike traditional TCP-based methods, Janus leverages UDP, integrates erasure coding for fault tolerance, and combines it with error-bounded lossy compression to reduce overhead. This novel design allows users to balance data transmission time and accuracy, optimizing transfer performance based on specific scientific requirements. Additionally, Janus dynamically adjusts erasure coding parameters in response to real-time network conditions, ensuring efficient data transfers even in fluctuating environments. We develop optimization models for determining ideal configurations and implement adaptive data transfer protocols to enhance reliability. Through extensive simulations and real-network experiments, we demonstrate that Janus significantly improves transfer efficiency while maintaining data fidelity.

Esaulov, Vladislav [Georgia State University, Atla↗
DOE OSTI2022

Development and test of a mini-Data Acquisition system for the High-Luminosity LHC upgrade of the ATLAS Monitored Drift Tube detector

New front-end electronics including ASICs and FPGA boards are under development for the ATLAS Monitored Drift Tube (MDT) detector to handle the large data rates and harsh environment expected at high-luminosity LHC runs. A mobile Data Acquisition (miniDAQ) system is designed to perform integration tests of these front-end electronics. In addition, it will be used for surface commissioning of 96 small-radius MDT (sMDT) chambers and for integration and commissioning of new front-end electronics on the present ATLAS MDT chambers. Details of the miniDAQ hardware and firmware are described in this article. Here, the miniDAQ system is also used to read out new front-end electronics on an sMDT prototype chamber using cosmic muons and results obtained are shown.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Line tension induced character angle dependence of dislocation mobility in FCC alloys

Here, we explore the character angle dependence of dislocation-solute interactions in a face-centered cubic random Fe0.70Ni0.11Cr0.19 alloy through molecular dynamics (MD) simulations of dislocation mobility. Using the MD mobility data, we determine the phonon and thermally activated solute drag parameters which govern mobility for each dislocation character angle. The resulting parameter set indicates that, surprisingly, the solute energy barrier does not depend on character angle. Instead, only the zero-temperature flow stress—which is dictated by the activation area for thermal activation—is dependent on character angle. By analyzing the line roughness from MD simulations and the geometry of a bowing dislocation line undergoing thermal activation, we conclude that the character angle dependence of the activation area in this alloy is governed by the dislocation line tension, rather than the dislocation-solute interaction itself. Our findings motivate further investigation into the line geometry of dislocations in solid solutions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A User-Facing Metric to Quantify the Quality of Mobility (CRADA Final Report)

The leading urban mobility data analytics firm StreetLight Data, Inc. partnered with the National Renewable Energy Laboratory to explore a commercial version of the Mobility Energy Productivity (MEP) metric. The commercialization effort was aimed to expand the adoption of the metric to key stakeholders in the urban planning space. Research comprised industry analysis, stakeholder feedback and conducting transportation practitioner focus groups. StreetLight concluded that commercialization of MEP is not feasible in the current market because users need a dynamic MEP tool that enables scenario planning. It should be able to calculate a MEP score dynamically (near instantaneous) when different inputs are changed.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Continuous Emulation and Multiscale Visualization of Traffic Flow Using Stationary Roadside Sensor Data

With the advent of the next-generation traffic monitoring systems, there has been a significant increase in the spatial-temporal resolution of vehicle mobility data in many cities. Effective analysis and visualization of such data can provide transportation planners with data-driven insights, which can facilitate the understanding of multiscale traffic dynamics. In this paper, we present a web-based traffic emulator for emulating and visualizing near-real-time and historical traffic flows on highways using data from road-side sensors. To construct a continuous traffic flow, the emulator adopts an analytical pipeline that can (a) integrate traffic data collected from discrete road-side radar detection sensors, (b) interpolate traffic conditions (vehicle speed and volume) on unmeasured road segments based on traffic flow theory, and (c) generate lane-specific vehicle trajectories and movements using a mathematically optimized representation of the road network. Our app also provides an integrated visual workflow that allows users to explore the interconnected traffic dynamics using an appropriate traffic flow visualization selected based on the level of detail. We devise two innovative geo-visualization techniques that utilize an animated strips-network representation and a lane usage matrix to visualize lane performances. To ensure a smooth emulation of large-scale traffic flow in an easy-to-access web environment, we implement the emulator using client-side GPU-accelerated techniques. Lastly, we close with a case study that visualizes traffic dynamics of two scenarios - an afternoon peak hour and a traffic accident - in Chattanooga, Tennessee. Our app visualizes the responses of traffic dynamics during different traffic conditions, and to the presence of the traffic accident at different spatial scales.

42 ENGINEERING↗
DOE OSTI2023

Stakeholder analysis for designing an urban air quality data governance ecosystem in smart cities

Cities, the world over, are fuelling economic growth. At the same time, rapid urbanization is a root cause of serious environmental damage. Recent WHO global air pollution guidelines highlight air pollution as a critical environmental threat along with climate change. To address these threats, smart cities and clean air programs are on a rise. In smart cities, data and Information and Communication Technologies (ICT) are major drivers of city transformations. The 4th Industrial Revolution (4IR) technologies such as the Internet of Things (IoT), big data, artificial intelligence (AI), and cloud computing have the potential to accelerate these transformations toward urban resilience. However, the success of smart cities and clean air programs depends on cohesive multi-sector stakeholder contributions. This study conducted interdisciplinary participative stakeholder analysis to understand the data, and sectorial challenges, to outline the technological opportunities to facilitate clean air programs in Indian smart cities. The research highlights gaps due to siloed stakeholder operations, lack of data calibration, non-alignment of smart city and air quality management services, non-availability of health exposure data, and difficulty in translating scientific data into implementable actions. Stakeholders expressed potential ‘fit for the purpose’ use of IoT devices, satellites, smartphones, and mobility data augmented by AI methods in bridging these gaps. In conclusion, the analysis points toward a need to develop an easily accessible and ubiquitous urban data governance ecosystem enabling seamless cross-sector data exchanges to build trusting relationships among the stakeholders across the air quality management value chain.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

AlGaN High Electron Mobility Transistor for High-Temperature Logic

Here we report on AlGaN high electron mobility transistor (HEMT)-based logic development, using combined enhancement- and depletion-mode transistors to fabricate inverters with operation from room temperature up to 500°C. Our development approach included: (a) characterizing temperature-dependent carrier transport for different AlGaN HEMT heterostructures, (b) developing a suitable gate metal scheme for use in high temperatures, and (c) over-temperature testing of discrete devices and inverters. Hall mobility data (from 30°C to 500°C) revealed the reference GaN-channel HEMT experienced a 6.9x reduction in mobility, whereas the AlGaN channel HEMTs experienced about a 3.1x reduction. Furthermore, a greater aluminum contrast between the barrier and channel enabled higher carrier densities in the two-dimensional electron gas for all temperatures. The combination of reduced variation in mobility with temperature and high sheet carrier concentration showed that an Al-rich AlGaN-channel HEMT with a high barrier-to-channel aluminum contrast is the best option for an extreme temperature HEMT design. Three gate metal stacks were selected for low resistivity, high melting point, low thermal expansion coefficient, and high expected barrier height. The impact of thermal cycling was examined through electrical characterization of samples measured before and after rapid thermal anneal. The 200-nm tungsten gate metallization was the top performer with minimal reduction in drain current, a slightly positive threshold voltage shift, and about an order of magnitude advantage over the other gates in on-to-off current ratio. After incorporating the tungsten gate metal stack in device fabrication, characterization of transistors and inverters from room temperature up to 500°C was performed. The enhancement-mode (e-mode) devices’ resistance started increasing at about 200°C, resulting in drain current degradation. This phenomenon was not observed in depletion-mode (d-mode) devices but highlights a challenge for inverters in an e-mode driver and d-mode load configuration.

42 ENGINEERING↗
DOE OSTI2020

Mobility, Energy, and Electric Vehicle Typology for New York State

Mobility patterns, technology adoption and associated energy outcomes vary tremendously across settlement types. This paper explores how a highly geographically resolved exploration of the social, economic, techno-infrastructural and environmental domains of New York State is key to understanding observed variations in transportation technology adoption and associated mobility and energy outcomes. Current socioeconomic and mobility data sets at the census block group level are integrated in a hierarchical clustering approach to show how variations in mobility and energy outcomes are shaped by these domains - which may enhance progress on investments, or effectively inform planning and other decisions for state-wide goals. The clustering produces four settlement types to predict dependent variables of electric vehicle (EV) adoption rates, commute mode, vehicle fuel economy, and vehicles per household. This typology shows EV adoption rates among the core urban population, which is wealthy and highly-educated, are high - 3 EVs/1000 vehicles versus 1 EV/1000 vehicles among the urban working class. Commuting mode is closely linked with population and employment density - more than 90% of core urbanites use transit or active modes, compared with only 22% of suburbanites and 17% of rural residents. Household vehicle ownership also varies, with 2 vehicles per household in rural areas and only 0.5 in core urban settings. Important findings on differences among the rural, suburban, urban, and urban core settlement types suggest a need to explore how best to manage and anticipate very different types of services that may be supportive in achieving energy-efficient and affordable mobility systems state-wide.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Understanding the Drivers of Mobility during the COVID-19 Pandemic in Florida, USA Using a Machine Learning Approach

As of March 2021, the State of Florida, U.S.A. had accounted for approximately 6.67% of total COVID-19 (SARS-CoV-2 coronavirus disease) cases in the U.S. The main objective of this research is to analyze mobility patterns during a three month period in summer 2020, when COVID-19 case numbers were very high for three Florida counties, Miami-Dade, Broward, and Palm Beach counties. To investigate patterns, as well as drivers, related to changes in mobility across the tri-county region, a random forest regression model was built using sociodemographic, travel, and built environment factors, as well as COVID-19 positive case data. Mobility patterns declined in each county when new COVID-19 infections began to rise, beginning in mid-June 2020. While the mean number of bar and restaurant visits was lower overall due to closures, analysis showed that these visits remained a top factor that impacted mobility for all three counties, even with a rise in cases. Our modeling results suggest that there were mobility pattern differences between counties with respect to factors relating, for example, to race and ethnicity (different population groups factored differently in each county), as well as social distancing or travel-related factors (e.g., staying at home behaviors) over the two time periods prior to and after the spike of COVID-19 cases.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Exploring Ion Mobility Mass Spectrometry Data File Conversions to Leverage Existing Tools and Enable New Workflows

Ion mobility (IM) is often combined with LC-MS experiments to provide an additional dimension of separation for complex sample analysis. While highly complex samples are better characterized by the full dimensionality of LC-IM-MS experiments to uncover new information, downstream data analysis workflows are often not equipped to properly mine the additional IM dimension. For many samples the data acquisition benefits of including IM separations are all that is necessary to uncover sample information and the full dimensionality of the data is not required for data analysis. Post-acquisition reduction and adaptation of the dimensions of LC-IM-MS and IM-MS experiments into an LC-MS format opens the possibility to use a plethora of existing software tools. In this work, we developed data file conversion tools to reduce the complexity of IM data analysis. Three data file transformations are introduced in the PNNL PreProcessor software: 1) mapping the IM axis to the LC axis for IM-MS data, 2) converting the drift time vs. m/z space to CCS/z vs m/z space, and 3) transforming All Ions IM/MS mobility aligned fragmentation data to a standard LC-MS DDA data file format. Finally, these new data file conversions are demonstrated with corresponding lipidomics and proteomics workflows that leverage existing LC-MS data analysis software to highlight the benefits of the data transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Global root traits (GRooT) database

Motivation: Trait data are fundamental to the quantitative description of plant form and function. Although root traits capture key dimensions related to plant responses to changing environmental conditions and effects on ecosystem processes, they have rarely been included in large-scale comparative studies and global models. For instance, root traits remain absent from nearly all studies that define the global spectrum of plant form and function. Thus, to overcome conceptual and methodological roadblocks preventing a widespread integration of root trait data into large-scale analyses we created the Global Root Trait (GRooT) Database. GRooT provides readyto- use data by combining the expertise of root ecologists with data mobilization and curation. Specifically, we (a) determined a set of core root traits relevant to the description of plant form and function based on an assessment by experts, (b) maximized species coverage through data standardization within and among traits, and (c) implemented data quality checks. Main types of variables contained: GRooT contains 114,222 trait records on 38 continuous root traits. Spatial location and grain: Global coverage with data from arid, continental, polar, temperate and tropical biomes. Data on root traits were derived from experimental studies and field studies. Time period and grain: Data were recorded between 1911 and 2019. Major taxa and level of measurement: GRooT includes root trait data for which taxonomic information is available. Trait records vary in their taxonomic resolution, with subspecies or varieties being the highest and genera the lowest taxonomic resolution available. It contains information for 184 subspecies or varieties, 6,214 species, 1,967 genera and 254 families. Owing to variation in data sources, trait records in the database include both individual observations and mean values. Software format: GRooT includes two csv files. A GitHub repository contains the csv files and a script in R to query the database.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Mining and Validating Social Media Data for COVID-19–Related Human Behaviors Between January and July 2020: Infodemiology Study

Background: Health authorities can minimize the impact of an emergent infectious disease outbreak through effective and timely risk communication, which can build trust and adherence to subsequent behavioral messaging. Monitoring the psychological impacts of an outbreak, as well as public adherence to such messaging, is also important for minimizing long-term effects of an outbreak. Objective: We used social media data from Twitter to identify human behaviors relevant to COVID-19 transmission, as well as the perceived impacts of COVID-19 on individuals, as a first step toward real-time monitoring of public perceptions to inform public health communications. Methods: We developed a coding schema for 6 categories and 11 subcategories, which included both a wide number of behaviors as well codes focused on the impacts of the pandemic (eg, economic and mental health impacts). We used this to develop training data and develop supervised learning classifiers for classes with sufficient labels. Classifiers that performed adequately were applied to our remaining corpus, and temporal and geospatial trends were assessed. We compared the classified patterns to ground truth mobility data and actual COVID-19 confirmed cases to assess the signal achieved here. Results: We applied our labeling schema to approximately 7200 tweets. The worst-performing classifiers had F1 scores of only 0.18 to 0.28 when trying to identify tweets about monitoring symptoms and testing. Classifiers about social distancing, however, were much stronger, with F1 scores of 0.64 to 0.66. We applied the social distancing classifiers to over 228 million tweets. We showed temporal patterns consistent with real-world events, and we showed correlations of up to –0.5 between social distancing signals on Twitter and ground truth mobility throughout the United States. Conclusions: Behaviors discussed on Twitter are exceptionally varied. Twitter can provide useful information for parameterizing models that incorporate human behavior, as well as for informing public health communication strategies by describing awareness of and compliance with suggested behaviors.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

COVID-19 dynamics across the US: A deep learning study of human mobility and social behavior

This paper presents a deep learning framework for epidemiology system identification from noisy and sparse observations with quantified uncertainty. The proposed approach employs an ensemble of deep neural networks to infer the time-dependent reproduction number of an infectious disease by formulating a tensor-based multi-step loss function that allows us to efficiently calibrate the model on multiple observed trajectories. The method is applied to a mobility and social behavior-based SEIR model of COVID-19 spread. The model is trained on Google and Unacast mobility data spanning a period of 66 days, and is able to yield accurate future forecasts of COVID-19 spread in 203 US counties within a time-window of 15 days. Interestingly, a sensitivity analysis that assesses the importance of different mobility and social behavior parameters reveals that attendance of close places, including workplaces, residential, and retail and recreational locations, has the largest impact on the effective reproduction number. Furthermore, the model enables us to rapidly probe and quantify the effects of government interventions, such as lock-down and re-opening strategies. Taken together, the proposed framework provides a robust workflow for data-driven epidemiology model discovery under uncertainty and produces probabilistic forecasts for the evolution of a pandemic that can judiciously provide information for policy and decision making. All codes and data accompanying this manuscript are available at https://github.com/PredictiveIntelligenceLab/DeepCOVID19.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Robust Deep Gaussian Process-Based Probabilistic Electrical Load Forecasting Against Anomalous Events

The abnormal events, such as the unprecedented COVID-19 pandemic, can significantly change the load behaviors, leading to huge challenges for traditional short-term forecasting methods. This article proposes a robust deep Gaussian processes (DGP)-based probabilistic load forecasting method using a limited number of data. Since the proposed method only requires a limited number of training samples for load forecasting, it allows us to deal with extreme scenarios that cause short-term load behavior changes. In particular, the load forecasting at the beginning of abnormal event is cast as a regression problem with limited training samples and solved by double stochastic variational inference DGP. The mobility data are also utilized to deal with the uncertainties and pattern changes and enhance the flexibility of the forecasting model. The proposed method can quantify the uncertainties of load forecasting outcomes, which would be essential under uncertain inputs. Extensive comparison results with other state-of-the-art point and probabilistic forecasting methods show that our proposed approach can achieve high forecasting accuracies with only a limited number of data while maintaining the excellent performance of capturing the forecasting uncertainties.

anomalous events↗
DOE OSTI2026

Outcomes of PAX sapiens-Supported Global Wildlife Data Sharing Conferences for Enhanced One Health Security (GWDSC)

Across two consecutive Global Wildlife Data Sharing Conferences supported by PAX sapiens—Year 1 (May 2024) at Pacific Northwest National Laboratory and Year 2 (2025) in Ciudad Real, Spain—the initiative converted wildlife data sharing from aspiration into operational reality, producing measurable impacts in platform development, data mobilization, standards harmonization, and international partnership formation. The conferences addressed a critical gap in global health security: while 75% of emerging infectious diseases affect both humans and animals and over 60% originate in wildlife, wildlife health surveillance has historically lagged behind human and agricultural sectors due to fragmented databases, inconsistent terminology, uneven capacity, and limited cross-border coordination. By convening practitioners, government agencies, international organizations, academic institutions, and NGOs, the GWDSC catalyzed trust-based relationships and practical workflows that enable earlier detection, better risk assessment, and more effective prevention of threats at the wildlife–domestic animal–human–environment interface.

54 ENVIRONMENTAL SCIENCES↗