Search NASA⌕ Search

SEARCH · Search NASA

Results for “mode cycling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

The role of edge plasma parameters in H-mode density limit on the JET-ILW

A study of a dataset of JET H-mode plasma with the Be/W ITER-like wall (JET-ILW) shows that reaching the edge MHD ballooning limit leads to confinement degradation. However, unlike JET plasmas with a carbon wall (JET-C), the JET-ILW plasmas stay in a marginal dithering phase for a relatively long period, associated with a higher (≈20%) H-mode density limit (HDL) than JET-C equivalents. This suggests that ITER could be operated in H-mode with higher density than the scaling based on carbon wall devices, but likely with a dithering phase plasma with lower confinement. A new, reliable estimator for JET E r, min has been derived by combining HRTS measurements of pedestal gradient and edge-SOL decay lengths. JET radial E r ETB wells are observed in the range of -15 to -60 kV m -1 in high performance H-modes, consistent with previous CXRS results in ASDEX Upgrade. The results imply that a higher positive E × B shear in the near SOL plays a role in sustaining a marginal phase in JET-ILW which leads to a higher HDL than that in JET-C. The results of the JET-ILW dataset show agreement with the Goldston finite collisionality HD model for SOL broadening at high collisionality. A hypothesis for the dithering H-mode phase is proposed: as n e,SOL increases, ν *,SOL increases, SOL broadens, E r shear decreases, triggers L-mode; n e drops, ν *,SOL decreases, SOL becomes narrower, and E r shear increases, triggering H-mode, resulting in a cycle of H–L–H- oscillations. For burning plasma devices, such as ITER, operating just below the MHD limit for the dithering phase could be a promising regime for maximising core density, and fusion performance while minimising plasma-material interaction. The oscillatory signal during the dithering phase could be used as a precursor of undesirable plasma performance for control purposes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Neutral gas analysis for JET DT operation

Neutral gas analysis, the measurement and evaluation of total and partial pressures, is a key technique to study the impact of neutral gas dynamics on retention, recycling and release processes of fuel or impurity species in fusion devices. At JET, the experiment closest to ITER in terms of operating parameters and size, various detectors and techniques for partial pressure and total pressure measurements are deployed together to characterise neutral gas dynamics during and after plasma operation on various toroidal and poloidal locations. An extensive modification of JET's sub-divertor neutral gas diagnostic system aims at retaining and extending established measurement capabilities in the forthcoming Deuterium-Tritium (DT) experiments (DTE2). To achieve DT compatibility, a separation of radiation-sensitive electronics from the sensor and adequate radiation shielding is required, as well as utilisation of a DT compatible differential pumping system with adjustable throughput to account for the strong pressure variation in the sub-divertor region. Finally, the sub-divertor neutral gas diagnostic will be equipped with multiple Residual Gas Analysers (RGAs), utilising quadrupole mass spectrometry and electrostatic ion-trap-principles, all operating with remote electronics located behind the biological radiation shield. These RGAs will record data in a fast selected discrete mass mode during plasma pulses (cycle ~2 s) and will automatically switch back to continuous data recording (cycle ~100 s) afterwards. They will be complemented by a newly improved Penning gauge spectroscopy configuration in particular supporting the He and D 2 separation relevant for DT operation. The distance between these devices and their associated control unit is typically 15m . A newly developed RGA with a cable length of 80 m, compatible with the ITER environment, will also be employed for the first time. Finally, this set-up and its operation in DTE2 will provide vital input to the development of the ITER divertor RGA in the most relevant environment currently available.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Deletion of Re -citrate synthase allows for analysis of contributions of tricarboxylic acid cycle directionality to the growth of Heliomicrobium modesticaldum

ABSTRACT Heliomicrobium modesticaldum,a phototrophic member of the phylum Firmicutes and family Clostridiales, possesses most of the enzymes specific to the reductive tricarboxylic acid (rTCA) cycle, except for the key enzyme, ATP-citrate lyase. It is thought to utilize a split TCA cycle when growing on pyruvate as a carbon source, in which the oxidative TCA (oTCA) direction generates most of the 2-ketoglutarate, but some can be produced in the reductive direction. Although a typicalSi-citrate synthase gene is not found in the genome, it was suggested that gene HM1_2993, annotated as homocitrate synthase, actually encodesRe-citrate synthase, which would function as the initial enzyme of the oTCA cycle. We deleted this gene to test this hypothesis and, if true, see what effect severing access to the oTCA cycle would have on this organism. The endogenous CRISPR-Cas system was used to replace the open reading frame with a selectable marker. The deletion mutants could grow on pyruvate but were unable to grow phototrophically on acetate + CO 2 as carbon source. Growth on acetate could be rescued by the addition of different electron sources (formate or ascorbate), suggesting that the oTCA cycle is used to oxidize acetate to generate electrons required to drive the carboxylation of acetyl-CoA. The deletion mutants were capable of growing in acetate minimal media without additional organic supplements beyond formate, demonstrating that the rTCA cycle can be employed to support sufficient 2-ketoglutarate production in this organism, unlike citrate synthase mutants in several chemoheterotrophic organisms utilizing the oTCA cycle. IMPORTANCE Heliobacteria are a unique group of phototrophic bacteria that are obligate anaerobes and possess a rudimentary system to use light as a source of energy. They do not make oxygen or fix carbon dioxide. Here, we explore their fundamental carbon metabolism to understand the role and operation of the central TCA cycle. This work shows both the role and operation of this cycle under different growth modes and explains how these organisms can obtain electrons to drive their biosynthetic metabolism. This foundational knowledge will be crucial in the future when attempts are made to use this organism as a platform for oxygen-sensitive synthesis of compounds in an anaerobe that can use light as its energy source.

Biotechnology & Applied Microbiology↗
DOE OSTI2023

Air Source Heat Pumps in Very Cold Climates

Air source heat pumps (ASHPs) in heating mode use a refrigeration cycle to remove heat from the outside air and transfer it into a building. Therefore, ASHPs have the potential to save energy compared to conventional heat sources that create the heat as opposed to transferring it from outside. Many cold climate ASHPs available on the market today can operate at outside temperatures of -25 degrees C (-13 degrees F) or even lower. As a result of technological advances and other factors, there is growing interest in ASHPs in cold climates, including very cold regions such as Alaska. However, guidance on the selection, installation, and operation of ASHPs in these very cold climates is limited, as significant data gaps exist regarding the performance of ASHPs in very cold environments. To address these data gaps and guide future innovations, our research team has studied the field performance of several ASHP installations in Alaska and done lab evaluations of several ASHP models using a cold chamber. While a cold chamber cannot fully reflect field conditions, it allowed for changing one variable at a time and gaining additional understanding of the behavior of ASHPs that would be difficult to gain from field studies only. This study focused on two main variables: the temperature in the chamber (representing the outdoor temperature) and the level of thermal loading of the ASHP. The results from the field as well as the lab show that ASHPs can operate with relatively high efficiency even in very cold climates if used in appropriate situations and in an appropriate way. It was found that not only the outside temperature, but also the level of thermal loading is a significant factor affecting the ASHP efficiency and needs to be carefully considered when sizing and operating ASHPs in very cold climates.

air source heat pump↗
DOE OSTI2024

Nonlinear dynamics of multiple Alfvén modes driven by trapped energetic ions in tokamaks: A triplet paradigm

Non-linear dynamics of multiple infernal Alfvén eigenmodes—a subset of global Alfvén eigenmodes in tokamak plasmas with extended low-shear central core [Marchenko et al., Phys. Plasmas 16, 092502 (2009)]—is studied. The analysis is carried out for a mode triplet with toroidal mode-numbers n=1, 2, 3. It was assumed that the n = 1 mode was linearly unstable due to precession resonance with trapped fast ions, whereas the other modes were linearly damped. The modes were coupled due to a non-linearity in a bounce-averaged drift kinetic equation for the distribution function of fast ions. Nonlinear equations for the mode amplitudes and phases are derived and solved numerically. It is found that the temporal evolution of the amplitudes and the phase (responsible for the frequency chirping) of the modes exhibit Hopf bifurcations to stable limit cycles. This can explain a synchronous cyclic destabilization of multiple modes in Alfvén avalanches (sudden growth of amplitudes of the mode cluster with different n and approximately equal frequency spacing) in NSTX and bursting modes in MAST—events, which resulted in enhanced loss of fast ions.

Marchenko, V. S. (ORCID:0000000261480533)↗
DOE OSTI2021

Rapid failure mode classification and quantification in batteries: A deep learning modeling framework

Unique, rapid identification and quantification of the dominant aging modes in lithium-ion batteries (LiBs) with early and non-specialized test data is a significant scientific challenge. Leveraging synthetic-data, deep-learning (DL) techniques have great potential to enable fast and robust classification and quantification of battery aging modes that produce different patterns of cell aging. This study, for the first time, presents a synthetic–data-based DL modeling framework for rapid and automatic classification and quantification of battery-aging modes and resultant aging with experimental validation. Availing synthetic dQ.dV -1 curves for ~26000 initial conditions and aging modes, the framework classified the dominant aging modes, for cells undergoing fast charge, in fewer than 100 cycles. Upon classification, the framework quantified the evolution of the aging modes, which were often nonuniform with cycling, for 22 gr/NMC532 pouch cells tested up to 600 cycles at different charging rates (1C–9C).

25 ENERGY STORAGE↗
DOE OSTI2020

Roles of D1-Glu189 and D1-Glu329 in O 2 Formation by the Water-Splitting Mn 4 Ca Cluster in Photosystem II

During the catalytic step that precedes O–O bond formation in Photosystem II, a water molecule deprotonates and moves next to the water-splitting Mn 4 Ca cluster’s O5 oxo bridge. The relocated oxygen, known as O6 or Ox, may serve as a substrate, combining with O5 to form O 2 during the final step in the catalytic cycle, or may be positioned to become a substrate during the next catalytic cycle. Recent serial femtosecond X-ray crystallographic studies show that the flexibility of D1-E189 plays a critical role in facilitating the relocation of O 6 /Ox. In this study, the D1-E189G and D1-E189S mutations were characterized with FTIR difference spectroscopy. The data show that both mutations support Mn 4 Ca cluster assembly, substantially inhibit advancement beyond the S 2 state, and alter the network of H bonds that surrounds the Mn 4 Ca cluster. Previously, the D1-E189Q, D1-E189K, and D1-E189R mutations were shown to have little impact on the activity, electron transfer rates, or spectral properties of Photosystem II. A rationale for this behavior is presented. The residue D1-E329 interacts with water molecules in the O1 water network that has been suggested recently to supply substrate during the catalytic cycle. Characterization of the D1-E329A mutant with FTIR difference spectroscopy shows that this mutation does not substantially perturb the structure of PSII or the water molecules whose O–H stretching modes change during the catalytic cycle. Furthermore, this result provides additional evidence that the water molecules whose vibrational properties change during the S 1 to S 2 transition are confined approximately to the region bounded by D1-N87, D1-N298, and D2-K317.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Development of Stable Solid Oxide Electrolysis Cells for Low-Cost Hydrogen Production

The project objective was to demonstrate a solid oxide cell-based steam electrolysis stack that exhibits robustness, reliability, endurance, hydrogen purity, and produces hydrogen at elevated pressure of 2 to 3 bar. Innovative materials and processing methods were evaluated to improve degradation characteristics. Performance improvement focused on nearly all layers involved in the cell and stack assembly. Primary attention was paid to zirconia-ceria interface resistance control via sintering optimization and decrease in degradation from the oxygen electrode by evaluating low strontium (Sr) or Sr-free composition for both the oxygen electrode and current collection layer. Stack robustness was addressed by validating redox tolerance of fuel electrode, confirming capability of cells to survive repeated thermal cycles, studying the effect of pressure on performance and degradation, evaluating the effect of contamination on fuel and oxygen electrode performance and degradation, and identifying mitigation strategies to improve performance. The characterization included evaluation of electrochemical performance and stability followed by microstructural analysis. At the cell level, performance and stability improvements were achieved by incorporating a Sr-free oxygen electrode and a denser oxygen electrode barrier layer. At the stack level, pressurized operation reduces demand on first stage compression, the redox tolerant fuel electrode mitigates risk from service interruptions, and improvements to interconnect coating alleviate chromium (Cr) contamination effects. The denser barrier layer was achieved by adding a sintering aid to the samaria-doped ceria (SDC) composition that reduced sintering temperature by 150 °C. The resulting density was on par with the baseline SDC barrier layer density and the lower sintering temperature resulted in less resistive phase formation during sintering. Button cell tests did not demonstrate a change in performance when exposed to silicon (Si) or manganese (Mn) impurities to the fuel electrode and Cr impurity to the oxygen electrode. More detailed study however is warranted. The project addressed SOEC performance and stability at the cell and stack levels through a systematic approach to known sources of degradation that were combined and tested in three stack tests using an electrolyte supported cell design to allow for evaluation of a variety of fuel and oxygen electrode compositions. STK-82 and STK-83 had identical compositions. STK-100 incorporated the best materials and processing variables developed under this and concurrent projects, and was tested at elevated pressure in steam electrolysis. • STK-82 recovered performance after redox and thermal cycling, demonstrating the robustness of the stack and seals. It exhibited stable performance in testing for 500 hours in SOEC mode, followed by 300 hours of cycling between SOEC and SOFC tests. Degradation during SOEC operation was 1.8 %/ 1,000 hours. • STK-83 generated hydrogen at >80% steam conversion, and oxygen above 98.5 % purity during pressurized operation. Both hydrogen and oxygen were generated at 3 barg pressure without the use of a pressure vessel. In addition to balanced pressure, electrolysis operation at 1 bar differential pressure across anode and cathode was also demonstrated to substantial the robustness of the cell and seal. • STK-100 measured at initial ambient pressure conditions showed an area specific resistance of 1.1 ohm-cm 2 , and STK-83 had 1.3 ohm-cm 2 .

08 HYDROGEN↗
DOE OSTI2021

Study of an Integration Platform Based on an Adiabatic Active-Layer Waveguide Connection for InP Photonic Device Integration Mirroring That of Heterogeneous Integration on Silicon

In this work, a photonic device integration platform capable of integration of active-passive InP-based photonic devices without the use of material regrowth is introduced. The platform makes use of an adiabatic active-layer waveguide connection (ALWC) to move an optical beam between active and passive devices. The performance of this platform is analyzed using an example made up of four main sections: (1) a fiber coupling section for enabling vertical beam coupling from optical fiber into the photonic chip using a mode-matched surface grating with apodized duty cycles; (2) a transparent waveguide section for realizing passive photonic devices; (3) an adiabatic mode connection structure for moving the optical beam between passive and active device sections; and (4) an active device section for realizing active photonic devices. It is shown that the coupled surface grating, when added with a bottom gold reflector, can achieve a high chip-to-fiber coupling efficiency (CE) of 88.3% at 1550 nm. The adiabatic active-layer mode connection structure has an optical loss of lower than 1% (CE > 99%). The active device section can achieve an optical gain of 20 dB/mm with the use of only 3 quantum wells. The optimized structural parameters of the entire waveguide module are analyzed and discussed.

42 ENGINEERING↗
DOE OSTI2021

Kerr-lens mode-locked Cr:ZnS oscillator reaches the spectral span of an optical octave

We report, to the best of our knowledge, the first super-octave femtosecond polycrystalline Cr:ZnS laser at the central wavelength 2.4 µm. The laser is based on a non-polarizing astigmatic X-folded resonator with normal incidence mounting of the gain element. The chromatic dispersion of the resonator is controlled with a set of dispersive mirrors within one third of an optical octave over 2.05–2.6 µm range. The resonator’s optics is highly reflective in the range 1.8–2.9 µm. The components of the oscillator’s output spectrum at the wavelengths 1.6 µm and 3.2 µm are detected at –60 dB with respect to the main peak. Average power of few-cycle Kerr-lens mode-locked laser is 1.4 W at the pulse repetition frequency 79 MHz. That corresponds to 22% conversion of cw radiation of Er-doped fiber laser, which we used for optical pumping of the Cr:ZnS oscillator.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Understanding Aitken Mode Aerosol Variability over the Southern Ocean and Antarctica: Insights from Cloud Condensation Nuclei Data

Aitken mode aerosol particles play an important role influencing cloud properties and sustenance, acting as a reservoir of potential cloud condensation nuclei against precipitation scavenging. However, there is limited data on Aitken mode aerosols. In this study, we develop a method to estimate Aitken mode aerosol concentrations and size distribution using cloud condensation nuclei measurements (CCN) and κ-Köhler theory. The performance of this method is evaluated using scanning mobility particle sizer (SMPS) data from recent field campaigns to demonstrate its skills and applicability. The method reasonably estimates Aitken- and accumulation-mode aerosol concentrations, achieving correlations of 0.7–0.9 with only modest biases (mean fractional bias within ±23% for Aitken mode and ±34% for accumulation-mode). This method is further applied to measurements collected over the Southern Ocean and Antarctica in recent years from multiple platforms, including ground sites, aircraft, and ships, to derive Aitken and accumulation-mode aerosol concentrations. Using the derived data, we examine the seasonal cycle, latitudinal variations, and vertical distribution of aerosols. Aitken mode aerosol concentrations are elevated over the Southern Ocean and Antarctica during the austral summer similar to the accumulation mode. In the austral summer, the free troposphere has more Aitken mode aerosols and fewer accumulation mode aerosols than the boundary layer, and thus likely serves as an important source of cloud-forming aerosol while also diluting the accumulation mode.

Kang, Litai [University of Washington] (ORCID:0000↗
DOE OSTI2023

A reversible perovskite air electrode for active and durable oxygen reduction and evolution reactions via the A-site entropy engineering

The performance of reversible solid oxide electrochemical cells (R-SOECs) is largely hindered by the insufficient electroactivity and poor durability of the bifunctional air electrodes, where the oxygen reduction and evolution reactions (ORR and OER) occur. Here, we report our findings in boosting the electrochemical activity and durability of an air electrode with Pr 0.2 Ba 0.2 Sr 0.2 La 0.2 Ca 0.2 CoO 3-δ (PBSLCC) via an A-site entropy engineering. The PBSLCC electrode shows enhanced oxygen reaction activity and excellent durability compared to binary and ternary double perovskites (PrBaCo 2 O 5+δ and Pr 0.8 Ba 0.8 Ca 0.4 Co 2 O 5+δ , respectively). A low and nearly unchanged area-specific resistance of 0.042Ωcm 2 is achieved at 750 °C during the 225-h stability test. La 0.9 Sr 0.1 Ga 0.8 Mg 0.2 O 3-δ electrolyte-supported cells with the PBSLCC air electrode show remarkable performance at 800 °C, demonstrating a peak power density of 1.2Wcm -2 in the fuel cell mode, and a current density of -1.1 Acm -2 at 1.3 V in the electrolysis mode while maintaining the excellent cycling durability of 228 h at ±0.5 Acm -2 under humidified H 2 (10% H 2 O). A bulk oxygen p-band center model is applied to verify that tailoring of the A-site entropy strongly influences the surface exchange coefficients (k* chem ), leading to higher oxygen reaction activity of PBSLCC than the binary and ternary perovskites. Finally, this study opens a new class of high-entropy perovskites for the rational design of air electrodes for R-SOECs with high activity and durability.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2026

From Cell to System: Accelerated hpc Simulations of BESS Aging under Frequency Regulation and Arbitrage use cases

Lithium-ion battery energy storage systems (BESS) packs have emerged as a leading solution for grid-scale energy storage, enhancing resiliency and balancing load fluctuations. Yet, experimental characterization of large-format LIB packs-particularly to assess performance and degradation over hundreds of cycles - demands substantial hardware investment and multi-year testing campaigns. In this work, we couple a hierarchical, physics-based modeling framework agnostic to electrode chemistries with high-performance computing to accelerate systems level evaluation by upto two orders of magnitude. Building on the open-source liionpack platform, we implement cell, module, and pack-scale electrochemical models enriched with mechanistic aging mechanisms and deploy them on an HPC cluster to simulate 150−200kWh systems over 500 - 1,000 cycles with in days. We subject these virtual B ESS to both constant-current cycling and realistic grid service profiles spanning frequency regulation, ramp-rate support, and energy arbitrage-and quantify the resulting degradation patterns. Our results reveal that localized cell aging can induce substantial nonuniformity at module and pack levels, with service-specific cycling protocols driving distinct aging modes. This rapid, multiscale modeling approach provides a powerful design-space exploration tool for optimizing electrical architecture, control strategies, and operational schedules to prolong pack lifetime and lower total cost of ownership.

Ayalasomayajula, Surya [ORNL] (ORCID:0009000860788↗
DOE OSTI2020

Comparison of Dead-Time Effects in a WPT System Inverter for Different Fixed-Frequency Modulation Techniques

In this paper, a comparative study of the dead-time effects in a wireless power transfer (WPT) system inverter is performed for different fixed-frequency control techniques. The dead-time is provided between the complementary switching instances of the inverter phase-legs to ensure safe operation of the input power source. Under certain operating conditions, the dead-time results in waveform distortions or voltage-polarity reversal (VPR) at the inverter output. The VPR affects the switching characteristics, harmonic spectrum, switching losses, and output voltage/power of the system. A detailed analysis of the dead-time effect on the WPT system parameters such as output voltage and output power is conducted for the different fixed-frequency control strategies (i.e., traditional phase-shift control, asymmetrical clamped-mode, and asymmetrical duty-cycle control). Furthermore, the impact of dead-time on the inverter switching losses is compared for the different control strategies.

Kavimandan, Utkarsh↗
DOE OSTI2025

Automating Testing of DUNE Electronics via a Finite State Machine

The Deep Underground Neutrino Experiment (DUNE) is a flagship international collaboration designed to study neutrinos tiny, nearly massless particles that may hold answers to fundamental questions about the Universe. Fermilab s Robotic Test Stand (RTS) plays a critical role in ensuring the quality of approximately 50,000 Application-Specific Integrated Circuit (ASIC) chips that will be used in DUNE s massive liquid argon detectors. These electronics will be inside the cryostat; therefore, they will need to have a high yield of working chips and low noise. To improve the automation and reliability of the RTS, this project focused on designing and implementing a Python-based finite state machine (FSM) to manage chip handling workflows. The FSM was developed as a modular software framework to coordinate robotic arm movements, manage chip tray positions, and monitor system states during testing. Key features include robust error handling routines, a pause/resume system for safe mid-cycle interruptions, and a simulation mode for iterative testing without hardware dependencies. The system was designed to prepare for seamless integration with RTS hardware components such as the robotic arm and vision system. This integration will streamline collaboration and enable efficient deployment of updates across the six total institutions performing testing. The outcomes of this internship contribute to Fermilab s mission to advance high-energy physics and support the DOE s national goals by directly improving the testing of equipment to be used in DUNE. The project also provided valuable experience in software design and contributing to the success of DUNE.

Kang, Caleb [William Rainey Harper Coll.]↗
DOE OSTI2026

NLR's FleetDNA Speed Distributions for EPA MOVES

The U.S. Environmental Protection Agency (EPA) MOtor Vehicle Emission Simulator (MOVES) models mobile sources of air toxics at small and large scales across the Unites States. Vehicle speed distributions based on the type of vehicle, type of road traveled, and hour of the day are inputs into MOVES. In conjunction with vehicle miles traveled (VMT) inputs, they are used to estimate total operation time and select the relevant driving cycles from which running operating modes and emissions are estimated. In an ongoing research effort, the National Laboratory of the Rockies (NLR) partnered with the EPA to provide default average speed data for heavy-duty vehicles based on NLR's FleetDNA database and the Bourns College of Engineering - Center for Environmental Research and Technology (CE-CERT) data set from the University of California, Riverside.

33 ADVANCED PROPULSION SYSTEMS↗