SEARCH · Search NASA
Results for “molecular solids”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Phases of the hydrogen isotopes under pressure: metallic hydrogen
Hydrogen is the simplest molecule in nature. One of the key problems and challenges in condensed matter physics is to understand the phases, properties, and structure of hydrogen as a function of pressure and temperature. Over 80 years ago Wigner and Huntington predicted that if solid molecular hydrogen was sufficiently compressed, it would transform to an atomic metal. Later, a second pathway emerged; it was predicted that if heated to high temperatures under pressure it would transform to liquid atomic hydrogen; this form of metallic hydrogen makes up ~90% of the planet Jupiter. The prediction of high temperature superconductivity of solid atomic metallic hydrogen stimulated the experimental community to produce this material . For decades hydrogen defied the experimental efforts to transform it. Using diamond anvil cells, metallic hydrogen has recently been produced at a pressure of ~5 million atmospheres, significantly greater than the pressure at the center of the earth. Liquid atomic metallic hydrogen has been produced at temperatures of a few thousand degrees Kelvin in diamond anvil cells, as well as in dynamic experiments. We review the seemingly simple, but actually complex properties of this quantum solid and metal and the decades of development and progress to achieve this important fundamental result.
Infrared reflectance measurements of the insulator-metal transition in solid hydrogen
Reflectance measurements on solid hydrogen to 177 GPa (1.77 Mbar) have been performed from near-infrared to ultraviolet wavelengths (0.5 to 3 eV). Above 150 GPa characteristic free-electron behavior in the infrared region is observed to increase sharply with increasing pressure. Analysis of volume dependence of the plasma frequency obtained from Drude-model fits to the spectra indicates that the pressure of the insulator-metal transition is 149 (+ or - 10) GPa at 295 K. The measurements are consistent with metallization by closure of an indirect gap in the molecular solid.
Strong polaronic effect in a superatomic two-dimensional semiconductor
Crystalline solids assembled from superatomic building blocks are attractive functional materials due to their hierarchical structure, multifunctionality, and tunability. An interesting example is Re 6 Se 8 Cl 2 , in which the Re 6 Se 8 building blocks are covalently linked into two-dimensional (2D) sheets that are stacked into a layered van der Waals solid. It is an indirect gap semiconductor that, when heavily doped, becomes a superconductor at low temperatures. Given the finite electronic bandwidths (300–400 meV), carrier properties in this material are expected to be strongly influenced by coupling to phonons. Here, we apply angle-resolved photoemission spectroscopy to probe the valence band edge (VBE) of Re 6 Se 8 Cl 2 . We find that dispersion of the VBE is a strong function of temperature. The bandwidth is W = 120 ± 30 meV at 70 K and decreases by one order of magnitude to W ~ 10 ± 20 meV as temperature is increased to 300 K. This observation reveals the dominant polaronic effects in Re 6 Se 8 Cl 2 , consistent with the Holstein polaron model commonly used to describe molecular solids.
Structure determination of ζ-N 2 from single-crystal X-ray diffraction and theoretical suggestion for the formation of amorphous nitrogen
The allotropy of solid molecular nitrogen is the consequence of a complex interplay between fundamental intermolecular as well as intramolecular interactions. Understanding the underlying physical mechanisms hinges on knowledge of the crystal structures of these molecular phases. That is especially true for ζ-N 2 , key to shed light on nitrogen’s polymerization. Here, we perform single-crystal X-ray diffraction on laser-heated N 2 samples at 54, 63, 70 and 86 GPa and solve and refine the hitherto unknown structure of ζ-N 2 . In its monoclinic unit cell (space group C 2/ c ), 16 N 2 molecules are arranged in a configuration similar to that of ε-N 2 . The structure model provides an explanation for the previously identified Raman and infrared lattice and vibrational modes of ζ-N 2 . Density functional theory calculations give an insight into the gradual delocalization of electronic density from intramolecular bonds to intermolecular space and suggest a possible pathway towards nitrogen’s polymerization.
Reconsidering spin-phonon relaxation in magnetic molecules
Because of the larger intra-molecular distortion, optical phonons usually have stronger spin-phonon coupling than acoustic phonons in molecular magnets. This property may pose problems to the theory of spin relaxation in ordinary paramagnetic materials, which have served as the basis for the understanding of spin dynamics in molecular magnets for decades. In this review, we explain why the Raman processes driven by optical phonons can play a dominant role at low temperature and provide unconventional dependence between relaxation time and temperature. Especially, we emphasize that the sub-barrier relaxation and anomalously low Raman exponents are two common signatures of the dominance. Here, we also present the algorithm and implementation for calculating spin-phonon relaxation in molecular solids with density functional theory codes.
Targeting Oxide Concentration in Tantalum Oxide-Fluoride Anions
The design of both molecular and non-molecular solid materials with specific properties fundamentally relies on the controlled synthesis of crystals with desired functional groups, bonding motifs, polarity, chirality, and more. To this end, fluoride and oxide-fluoride anions have been utilized as basic building units (BBUs) in the synthesis of noncentrosymmetric racemic materials for their ability to create polar axes that facilitate the breaking of an inversion center as demonstrated in a series of compounds with [MF6]2- anions (M = Ti, Zr, Hf). Targeting an analog with a [TaOF5]2- anion, the phase space of (CuO, Ta2O5)/bpy/HF(aq)/H2O (bpy = 2,2′-bipyridine) was investigated and three new compounds with Cu-bpy cations and Ta-fluoride or Ta-oxyfluoride anions were synthesized: [Cu(bpy)2][TaF6], [Cu(bpy)2][Ta2OF10], and [Cu(bpy)F(H2O)2]2[TaF7]∙H2O with the anions [TaF6]-, [Ta2OF10]2-, and [TaF7]2-, respectively. The formation of these anions was found to be a product of both the concentration of hydrofluoric acid in solution and the ratio of metal-oxide starting materials to ligand. This work contributes to the understanding of mixed anion formation in the solid state.
Predicting a Key Catalyst-Performance Descriptor for Supported Metal Nanoparticles: Metal Chemical Potential
The chemical potential of metal atoms in supported nanoparticles provides a convenient descriptor of their performance as heterogeneous catalysts that captures the effects of particle size, support and alloying. Based on microcalorimetric measurements, the chemical potential is shown in this work to be predictable as a function of monometallic particle diameter and the adhesion energy of the particle to the support, and, for oxide supports, this adhesion energy correlates predictably with metal oxophilicity. These correlations provide predictions of metal chemical potential that can enable catalyst design. They also suggest an improvement in the Gibbs-Thomson relation for free-standing nanoparticles, whether metals or molecular solids.
Improved band gaps and structural properties from Wannier–Fermi–Löwdin self-interaction corrections for periodic systems
The accurate prediction of band gaps and structural properties in periodic systems continues to be one of the central goals of electronic structure theory. However, band gaps obtained from popular exchange–correlation (XC) functionals (such as LDA and PBE) are severely underestimated partly due to the spurious self-interaction error (SIE) inherent to these functionals. In this work, we present a new formulation and implementation of Wannier function-derived Fermi–Löwdin (WFL) orbitals for correcting the SIE in periodic systems. Since our approach utilizes a variational minimization of the self-interaction energy with respect to the Wannier charge centers (WCC), it is computationally more efficient than the HSE hybrid functional and other self-interaction corrections that require a large number of transformation matrix elements. Here, calculations on several (17 in total) prototypical molecular solids, semiconductors, and wide-bandgap materials show that our WFL self-interaction correction approach gives better band gaps and bulk moduli compared to semilocal functionals, largely due to the partial removal of self-interaction errors.
Environment-imposed selection rules for nuclear-spin conversion of H 2 in molecular crystals
Nuclear-spin conversion in molecular hydrogen is governed by strict symmetry rules that typically require magnetic fields or catalytic surfaces to break. Here we demonstrate that the intrinsic tensor composition of a non-magnetic molecular crystal field can impose and relax these rules without external fields. High-resolution infrared spectra of H 2 in crystalline CO 2 reveal large rank-2 (quadrupolar) crystal-field splittings of the 𝑚 sublevels, while nuclear-spin conversion occurs only through 𝛥𝑚 = 0 channels. Replacing CO 2 with polar N 2 O introduces rank-1 (dipole) components that partially open 𝛥𝑚 ≠ 0 pathways, while incorporation of paramagnetic NO 2 fully lifts the restriction. Furthermore, these results establish a direct correspondence between crystal-field tensor rank and nuclear-spin dynamics, introducing a general symmetry-based framework for designing and controlling spin-isomer populations and quantum-state connectivity in molecular solids.
Absolute far-infrared absorption intensities of alpha -nitrogen.
Intensities of translational lattice mode absorptions of alpha phase solid molecular nitrogen in far IR, noting temperature dependence
A method of producing high quality oxide and related films on surfaces
Aluminum oxide or aluminum nitride films were deposited on molecular beam epitaxy (MBE) grown GaAS(100) using a novel cryogenic-based reactive thin film deposition technique. The process involves the condensation of molecular oxygen, ammonia, or other gases normally used for reactive thin film deposition on the substrate before the metal is deposited. The metal vapor is deposited into this layer and reacts with the molecular solid to form the desired compound or a precursor that can be thermally decomposed to generate the desired compound. The films produced by this method are free of impurities, and the low temperatures can be used to control the film and interfacial structure. The process can be easily integrated with existing MBE systems. Ongoing research using the same apparatus suggests that photon or electron irradiation could be used to promote the reactions needed to produce the intended material.
Magnetic levitation of condensed hydrogen
Liquid and solid molecular hydrogen has been levitated using a pair of small superconducting solenoids. The hydrogen samples, up to 3 mm in dimension, were trapped in a magnetic potential having either a discrete minimum or a minimum in the form of a ring 1 cm in diameter. The hydrogen could be moved about in the magnetic trap by applying an electric field.
Ordered organic thin films self-assembled from the vapor phase
Organic films self-assembled from a liquid phase, as in Langmuir-Blodgett or adsorption from solution, have received much attention in the past decade as techniques to achieve highly oriented-ordered polymeric thin films. Many organic compounds including some of the same fatty acids have been vapor deposited as well. However, organic pigments and dyes comprise a major class of important materials which have very low solubilities yet excellent thermal stabilities, making them ideally suited for film deposition from the vapor phase. Surprisingly, such molecular systems exhibit a significant propensity to self order, a high sensitivity to deposition parameters, and a range of microstructural forms that cannot be duplicated by the less energetic mechanisms associated with solution adsorption processes. Molecular solids such as heterocyclic polynuclear aromatics are excellent candidates for film formation by vacuum deposition means. Over the past decade, our work and that of others investigating a wide variety of perylene and phthalocyanine derivatives identified five deposition parameters that can significantly affect film morphology, physical microstructure, and type and extent of ordering developed in vacuum and vapor transport grown films. These parameters are substrate temperature, deposition rate, substrate chemistry and epitaxy, ambient gas convective flows, and post deposition annealing. Examples of how each of these conditions manifest themselves in the film structure and ordering, most frequently revealed by scanning electron microscopy, reflection absorption infrared spectroscopy (RAIR), and grazing incidence x-ray diffraction (GIX), are presented.
Microstructural Characterization of Polymers by Positron Lifetime Spectroscopy
Positrons provide a versatile probe for monitoring microstructural features of molecular solids. In this paper, we report on positron lifetime measurements in two different types of polymers. The first group comprises polyacrylates processed on earth and in space. The second group includes fully-compatible and totally-incompatible Semi-Interpenetrating polymer networks of thermosetting and thermoplastic polyimides. On the basis of lifetime measurements, it is concluded that free volumes are a direct reflection of physical/electromagnetic properties of the host polymers.
Microstructural Characterization of Polymers with Positrons
Positrons provide a versatile probe for monitoring microstructural features of molecular solids. In this paper, we report on positron lifetime measurements in two different types of polymers. The first group comprises polyacrylates processed on earth and in space. The second group includes fully-compatible and totally-incompatible Semi-Interpenetrating polymer networks of thermosetting and thermoplastic polyimides. On the basis of lifetime measurements, it is concluded that free volumes are a direct reflection of physical/electromagnetic properties of the host polymers.
Molecular and solid-state topological polaritons induced by population imbalance
Abstract Strong coupling between electronic excitations in materials and photon modes results in the formation of polaritons, which display larger nonlinearities than their photonic counterparts due to their material component. We theoretically investigate how to optically control the topological properties of molecular and solid-state exciton–polariton systems by exploiting one such nonlinearity: saturation of electronic transitions. We demonstrate modification of the Berry curvature of three different materials when placed within a Fabry–Perot cavity and pumped with circularly polarized light, illustrating the broad applicability of our scheme. Importantly, while optical pumping leads to nonzero Chern invariants, unidirectional edge states do not emerge in our system as the bulk-boundary correspondence is not applicable. This work demonstrates a versatile approach to control topological properties of novel optoelectronic materials.
Microscale mechanical property variations of Al-substituted LLZO: insights from compression testing and molecular dynamics simulations
Ceramic solid electrolytes based on LLZO (Li 7 La 3 Zr 2 O 12 ) are promising candidates for all-solid-state batteries due to their high ionic conductivity and good apparent stability vs. lithium metal, however they are prone to mechanical failure. Lithium metal intrusions, alongside cell stack pressure, transition polycrystalline solid electrolyte grains into a compressed state that promotes crack propagation and fracture. Here this work examines the mechanical response of Al-substituted LLZO to compressive forces by measuring ultimate strength under pillar compression with a flat punch tip. Failure modes characterized by in situ scanning electron microscopy show diverse splitting patterns arising from internal porosity, grain boundaries, and slip planes. Large correlated variations in compressive strength (0.93–2.63 GPa) and Young's modulus (72.1–150.97 GPa) are observed across microscale regions of the solid electrolyte. Molecular dynamics simulations of LLZO with different porosities describe the variation of compressive strength and Young's modulus, and enable a microscale porosity model to be fit accounting for Young's modulus reduction across the solid electrolyte. Overall, the results indicate the importance of microscale mechanical testing of ceramic solid electrolytes to identify preferential sites for mechanical degradation and Li intrusion, and ensure the robust design of all-solid-state lithium metal batteries.