Search NASA⌕ Search

SEARCH · Search NASA

Results for “morphometric analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Experiment K-6-06. Morphometric and EM analyses of tibial epiphyseal plates from Cosmos 1887 rats

Light and electron microscopy studies were carried out on decalcified tibial epiphyseal plates of rats flown aboard Cosmos 1887 (12.5d flight plus 53.5h recovery). Analysis of variance showed that the proliferative zone of flight animals was significantly higher than that of synchronous controls, while the hypertrophic/calcification zone was significantly reduced. Flight animals had more cells than synchronous controls in the proliferative zone, and less in the hypertrophic/calcification region. The total number of cells, however, was significantly higher in flight animals. No differences were found for perimeter or shape factor of growth plates, but area was significantly lower in flight animals in comparison to synchronous controls. Collagen fibrils in flight animals were shorter and wider than in synchronous controls. The time required for a cell to cycle through the growth plate is 2 to 3 days, so most of the cells and matrix present were formed after the animals had returned to 1 g, and probably represent stages of recovery from microgravity exposure, which in itself is an interesting question.

Duke, P. J.↗

How High is that Dune? A Comparison of Methods Used to Constrain the Morphometry of Aeolian Bedforms on Mars

Methods traditionally used to estimate the relative height of surface features on Mars include: photoclinometry, shadow length and stereography. The MOLA data set enables a more accurate assessment of the surface topography of Mars. However, many small-scale aeolian bedforms remain below the sample resolution of the MOLA data set. In response to this a number of research teams have adopted and refined existing methods and applied them to high resolution (2-6 m/pixel) narrow angle MOC satellite images. Collectively, the methods provide data on a range of morphometric parameters (many not previously available for dunes on Mars). These include dune height, width, length, surface area, volume, longitudinal and cross profiles). This data will facilitate a more accurate analysis of aeolian bedforms on Mars. In this paper we undertake a comparative analysis of methods used to determine the height of aeolian dunes and ripples.

Bourke, M.↗

Analysis of Orientation-dependence of Martian Gullies

The recent discovery of small Martian gullies has stimulated debate about the role that water plays on the Martian surface under current or recent conditions. Of critical importance in evaluating various gully hypotheses is reliable morphometric and orientation data. The former centers on such questions as whether the water (or another fluid) emanated from a surface or sub-surface source and the duration of flow. The latter ties into whether solar insolation has an important effect on formation of the initial water source and subsequent mobilization. Initial studies of gullies indicated a poleward orientation dependence, an observation which has recently been challenged. Herein we investigate the orientation of Martian gullies and the dependence of various parameters on the orientation. Whereas previous studies have been global or through most of the southern hemisphere, we focus on several specific regions. This approach offers some advantages in that regional variations are factored out, such that of lithology, ground water table depth (if any), surface thermal properties, and other parameters are more or less the same in a given region. Differences in gully attributes as a function of orientation within a region can more easily be attributable to solar insolation effects than is the case for global statistics. We use the orientation to constrain several classes of gully formation hypotheses. 1) A favored orientation toward the pole across all regions could indicate a process dominated by melting of cold trapped ice, snow, or condensed volatiles from incident sunlight during summer under current conditions. 2) Variations among all regions would be more consistent with mechanisms less strongly tied to current solar insolation, such as geothermal heating of ice. 3) Favored orientations within specific regions, but differing among regions, could indicate a preference for poleward ices and melting, with orientation being a function of age and dependent on variations in obliquity and precision. We find that the gullies fall into either categories 2 or 3, but not 1, indicating the recent melting of cold trapped condensates is unlikely the sole formation mechanism.

Mohan, S.↗

Mobilifilum chasei: morphology and ecology of a spirochete from an intertidal stratified microbial mat community

Spirochetes were found in the lower anoxiphototrophic layer of a stratified microbial mat (North Pond, Laguna Figueroa, Baja California, Mexico). Ultra-structural analysis of thin sections of field samples revealed spirochetes approximately 0.25 micrometer in diameter with 10 or more periplasmic flagella, leading to the interpretation that these spirochetes bear 10 flagellar insertions on each end. Morphometric study showed these free-living spirochetes greatly resemble certain symbiotic ones, i.e., Borrelia and certain termite spirochetes, the transverse sections of which are presented here. The ultrastructure of this spirochete also resembles Hollandina and Diplocalyx (spirochetes symbiotic in arthropods) more than it does Spirochaeta, the well known genus of mud-dwelling spirochetes. The new spirochete was detected in mat material collected both in 1985 and in 1987. Unique morphology (i.e., conspicuous outer coat of inner membrane, large number of periplasmic flagella) and ecology prompt us to name a new free-living spirochete.

Non-NASA Center↗

A Comparison of Methods Used to Estimate the Height of Sand Dunes on Mars

The collection of morphometric data on small-scale landforms from other planetary bodies is difficult. We assess four methods that can be used to estimate the height of aeolian dunes on Mars. These are (1) stereography, (2) slip face length, (3) profiling photoclinometry, and (4) Mars Orbiter Laser Altimeter (MOLA). Results show that there is good agreement among the methods when conditions are ideal. However, limitations inherent to each method inhibited their accurate application to all sites. Collectively, these techniques provide data on a range of morphometric parameters, some of which were not previously available for dunes on Mars. They include dune height, width, length, surface area, volume, and longitudinal and transverse profiles. Thc utilization of these methods will facilitate a more accurate analysis of aeolian dunes on Mars and enable comparison with dunes on other planetary surfaces.

Bourke, M. C.↗

Fluvial valleys on Martian volcanoes

Channels and valleys were known on the Martian volcanoes since their discovery by the Mariner 9 mission. Their analysis has generally centered on interpretation of possible origins by fluvial, lava, or viscous flows. The possible fluvial dissection of Martian volcanoes has received scant attention in comparison to that afforded outflow, runoff, and fretted channels. Photointerpretative, mapping, and morphometric studies of three Martian volcanoes were initiated: Ceraunius Tholus, Hecate Tholus, and Alba Patera. Preliminary morphometric results indicate that, for these three volcanoes, valley junction angles increase with decreasing slope. Drainage densities are quite variable, apparently reflecting complex interactions in the landscape-forming factors described. Ages of the Martian volcanoes were recently reinterpreted. This refined dating provides a time sequence in which to evaluate the degradational forms. An anomaly has appeared from the initial study: fluvial valleys seem to be present on some Martian volcanoes, but not on others of the same age. Volcanic surfaces characterized only by high permeability lava flows may have persisted without fluvial dissection.

Baker, Victor R.↗

Height-depth ratios of lunar and terrestrial craters.

Quantitative analysis of Gilbert's (1893) observation regarding the surface geometry of lunar craters and terrestrial calderas. Topographic measurements were made using the ratio of exterior rim height to interior crater depth, and then extended to other types of crater. The morphometric data obtained as well as those presented elsewhere (Murray et al., 1970; Guest and Murray, 1969) verify Gilbert's contention that terrestrial calderas and most rimmed lunar craters are entirely unrelated phenomena. Auxiliary characteristics previously interpreted in terms of primary volcanic cratering on the moon are either of nonendogenic origin or are secondary endogenic features superposed on initial impact landforms (Pike, 1967).

Pike, R. J.↗

Compressive strain in Lunae Planum-shortening across wrinkle ridges

Wrinkle ridges have long been considered to be structural or structurally controlled features. Most, but not all, recent studies have converged on a model in which wrinkle ridges are structural features formed under compressive stress; the deformation being accommodated by faulting and folding. Given that wrinkle ridges are compressive tectonic features, an analysis of the associated shortening and strain provides important quantitative information about local and regional deformation. Lunae Planum is dominated by north-south trending ridges extending from Kasei Valles in the north to Valles Marineris in the south. To quantify the morphometric character, a photoclinometric study was undertaken for ridges on Lunae Planum using the Davis and Soderblom. More than 25 ridges were examined between long. 57 and 80 deg, lat. 5 to 25 deg N. For each ridge, several profiles were obtained along its length. Ridge width, total relief, and elevation offset were measured for each ridge. Analyses are given.

Plescia, J. B.↗

Morphometric consistency with the Hausdorff-Besicovich dimension

Studies using different measurement resolutions on a single morphologic feature may yield vastly different measured values for the perimeter. Apparent internal inconsistencies such as these have greatly impeded the numerical taxonomy, description, and modeling of landforms. Fortunately, the underlying internal consistency of measurements can often be reestablished by introducing the Hausdorff-Besicovich dimension into the analysis. This is demonstrated here by the example of perimeter-area ratio measurements made on some of the complicated ejecta deposits that surround many Martian meteorite-impact craters.

Woronow, A.↗

Crater morphometry from bistatic radar

In the present paper, bistatic radar techniques are discussed which can be used to identify and measure the dimensions of anomalously scattering regions on planetary surfaces. The morphometric potential of the bistatic radar is demonstrated by an example in which spectral features in Apollo 14 echoes are correlated with parts of the lunar crater Lansberg. Crater dimensions, including width of interior walls and extent of the ejecta blanket, are determined from a quantitative analysis. It is shown that the technique can be generalized for scattering areas at arbitrary positions with respect to the ground track, and could easily be inverted for characterization of a 'blind' target, such as Venus.

Simpson, R. A.↗

Elucidating the morphology and ecology of Eoandromeda octobrachiata from the Ediacaran of South Australia

Eoandromeda octobrachiata is a poorly understood Ediacaran organism, with spiral octoradial arms, found in South Australia and South China. The informal Nilpena member of the Rawnsley Quartzite, Flinders Ranges in South Australia preserves more than 200 specimens of Eoandromeda. Here we use the novel application of rotational geometric morphometrics together with palaeoenvironmental information to provide a better insight into their palaeobiology and ecology, and to address conflicting hypotheses regarding mode of life and taxonomic affinity. We find that Eoandromeda probably had a radially symmetrical shape in life, was cone shaped and had a high relief off the microbial mat. Analysis of the symmetric and asymmetric shape components showed that they deform strongly in the direction of palaeocurrent, therefore they are thought to be made of a flexible material. Almost all specimens are compressed flat. Specimens that appear to have not fully collapsed support the idea that Eoandromeda was probably cone shaped and suggest that they possibly collapsed spirally. Our shape analysis, along with observed morphological features, support a benthic rather than pelagic mode of life. Morphological and ecological inconsistencies do not fully support the hypothesis of a Ctenophora taxonomic affinity.

Tory L. Botha↗

Changes in Plants Developed from Imbibed Seeds Irradiated by Simulated Solar Particle Events

One of the major concerns for long-term exploration missions beyond the Earth’s magnetosphere is radiation risk primarily from solar particle events (SPEs) and galactic cosmic rays (GCRs). With the goal of enabling manned Mars exploration, the production of fresh food during long duration space missions may provide nutritional supplementation and benefit astronauts’ behavioral health. However, the effects of space radiation on plants and plant propagules have not been sufficiently investigated and characterized. In this study, we evaluated the effect of simulated SPEs on imbibed seeds of mizuna mustard, ‘Outredgeous’ red romaine lettuce, and ‘Red Robin’ dwarf tomato. Seeds were exposed to various doses of simulated SPEs (0, 40, 80 cGy, and 200 cGy), either acutely or at a low dose rate (LDR only for 40 and 80 cGy doses), using the NASA Space Radiation Laboratory (NSRL) facility at Brookhaven National Lab (BNL). Simulated SPE exposure was achieved using sequential exposures to protons with a broad energy range at 50-150 MeV/n. Control and irradiated seeds were planted either onto 0.5% MS-based agar plates containing required nutrients for early seedling analysis, or in peat plugs/pots for 28 day (mizuna and lettuce) and 91 day (tomato) grow outs. All plants were maintained under space-vehicle relevant conditions at 3000 ppm CO2, 50% RH, and 23°C, and a 16/8 h photoperiod with 300 μmol·m(exp -2)·s(exp -1) photosynthetically active radiation. Plant/fruit morphometrics and edible fresh mass were measured. Additionally, nutrient analyses were performed on mizuna and tomato fruit. Seedlings from irradiated seeds (both 40 and 80 cGy) showed significant and dose dependent impacts on cotyledon development and root length. Interestingly, small, but significant changes in vitamin content were found in mizuna and tomato fruits grown from 80 cGy (LDR) irradiated seeds. In addition, 80 cGy (LDR) simulated SPEs significantly delayed tomato early seedling development and plant growth, and reduced the quantity of fruits produced from the surviving plants. (This study was supported by NASA Human Research Program.)

J. T. Richards↗

Changes in Plants Developed from Imbibed Seeds Irradiated by Simulated Solar Particle Events

One of the major concerns for long-term exploration missions beyond the Earth’s magnetosphere is radiation risk primarily from solar particle events (SPEs) and galactic cosmic rays (GCRs). With the goal of manned Mars exploration, the production of fresh food during long duration space missions may provide nutritional supplementation and benefit astronauts’ behavioral health. However, the effects of space radiation on plants and plant propagules have not been sufficiently investigated and characterized. In this study, we evaluated the effect of simulated SPEs on imbibed seeds of mizuna mustard, ‘Outredgeous’ red romaine lettuce, and ‘Red Robin’ dwarf tomato. Seeds were exposed to various doses of simulated SPEs (0, 40, 80 cGy, and 200 cGy), either acutely or at a low dose rate (LDR only for 40 and 80 cGy doses), using the NASA Space Radiation Laboratory (NSRL) facility at Brookhaven National Lab (BNL). Simulated SPE exposure was achieved using sequential exposures to protons with a broad energy range at 50-150 MeV/n. Control and irradiated seeds were planted either onto 0.5% MS-based agar plates containing required nutrients for early seedling analysis, or in peat plugs/pots for 28 day (mizuna and lettuce) and 91 day (tomato) grow outs. All plants were maintained under space-vehicle relevant controlled environment conditions at 3000 ppm CO2, 50% RH, and 23°C, and a 16/8 h photoperiod with 300 μmol·m-2·s-1 photosynthetically active radiation. Plant/fruit morphometrics and edible fresh mass were measured. In addition, nutrient analyses were performed for both mizuna and ripe tomatoe fruit. Seedlings from irradiated seeds (both 40 cGy and 80 cGy) showed significant changes in cotyledon development, as well as root length. Interestingly, small, but significant changes in vitamin content were found in mizuna and tomato fruits grown from 80 cGy (LDR) irradiated seeds. In addition, 80 cGy (LDR) simulated SPEs significantly affected tomato early seedling development, plant growth, and the quantity of fruits produced from the surviving plants. Generally, compared to 80 cGy, 40 cGy (LDR) of simulated SPEs displayed some impacts to the seeds and seedlings, but to a much lesser degree. (This study was supported by NASA Human Research Program.)

J.T. Richards↗

Tharsis volcanoes - Separation distances, relative ages, sizes, morphologies, and depths of burial

Network analysis indicates the separation distances of the Tharsis volcanoes to be 700 to 900 km; this is considered to be the thickness of the Tharsis thermal lithosphere or 'tectosphere' which has thickened with time. Although as a whole the Tharsis volcanoes exhibit a random distribution, preferential alignments emerge when the history of the region is divided into separate periods. The preferential alignments mimic those of fractures in the surrounding terrain. Photogeologic and morphometric data indicate that the volcanoes fall into four distinct classes: montes, tholi, paterae, and a class whose sole representative is Alba Patera. The volcanoes have been buried by lava up to about 4 km in thickness. The sizes of the volcanoes directly correlate with their separation distances from their nearest neighbors. It is concluded that the greater the lithosphere thickness, the larger will be the volcano and the greater its separation distance from its nearest neighbor.

Whitford-Stark, J. L.↗

Pseudocraters as indicators of ground ice on Mars

Positive identification of Martian pseudocraters would be a strong indication of past occurrence of ice at or near the surface of Mars. The basis for suggesting that small cones on Mars are pseudocraters includes: (1) small size, (2) abundant but patchy distribution on what appear to be volcanic plains, (3) presence of other features suggestive of surface or subsurface ice, (4) morphological similarities to Icelandic pseudocraters, and (5) the similarity in distribution of crater/cone diameter ratios to Icelandic pseudocraters. This last morphometric parameter may be the most important, since other possible small terrestrial volcanic analogs have very different crater/cone diameter ratio distributions. In a survey of the available high resolution Viking Orbiter imagery, abundant fields of possible pseudocraters were found. However, only a small fraction of the plains forming units imaged at high resolution were found to contain the small cones. This low discovery rate, combined with the limited high resolution imagery, restrict Martian pseudocraters as global indicators of surface or subsurface ice. The meanings of this terrain analysis are discussed.

Frey, Herbert↗

Fiber diameter distributions in the chinchilla's ampullary nerves

A morphometric study of the chinchilla's ampullary nerves was conducted to produce an unbiased accounting of the diameter distribution of their constituent fibers. Diameter analyses were determined from 1 microm plastic-embedded nerve sections taken at a plane immediately proximal to the sensory epithelium. We found these nerves to be composed of 2094+/-573 fibers, having diameters that ranged from 0.5 to 8 microm. The distributions of diameters were positively skewed, where approximately 75% of the fibers were found to have diameters less than 3.5 microm. An analysis of the spatial distribution of diameters within the nerve section revealed that the lateralmost areas of the nerve contained larger fractions of fibers within the smallest diameter quintiles, and the central area harbored greater proportions of the larger diameter quintiles. However, significant fractions of all quintiles were found in all areas. These data were integrated with available data of Fernandez et al. (1998) to produce diameter estimates of calyx, dimorphic, and bouton morphology subpopulations. In view of a general relationship between diameter, innervation locus, and an afferent's physiologic characteristics, these data provide the basis for developing a perspective for the in situ distribution of afferent response dynamics.

Non-NASA Center↗

Verification of LANDSAT imagery for morphametric and topological studies of drainage basins in a section of the western plateau of Sao Paulo State: Tiete-Aguapei watershed

The potential of using LANDSAT MSS imagery for morphometric and topological studies of drainage basins was verified. Using Tiete and Aguapei watershed (Western Plateau) as the test site because of its homogeneous landscape. Morphometric variables collected for ten drainage basins include: circularity index; river density; drainage density; topographic texture; areal and index length; basin parameter; and main river length 1st order and 2nd order channel length. The topographical variables determined were: order; magnitude; bifuraction ratio; weighted bifuraction ratio; number of segments; number of linking; trajectory length; and topological diameter. Data were collected on topographical maps at the scale of 1:250,000 and 1:59,000 and on LANDSAT imagery at the scale of 1:250,000. The results which were summarized on tables for further analysis, show that LANDSAT imagery can supply the lack of topographic charts for drainage studies.

Parada, N. D. J.↗

Craters on Earth, Moon, and Mars - Multivariate classification and mode of origin

Testing extraterrestrial craters and candidate terrestrial analogs for morphologic similitude is treated as a problem in numerical taxonomy. According to a principal-components solution and a cluster analysis, 402 representative craters on the Earth, the Moon, and Mars divide into two major classes of contrasting shapes and modes of origin. Craters of net accumulation of material (cratered lunar domes, Martian calderas, and all terrestrial volcanoes except maars and tuff rings) group apart from craters of excavation (terrestrial meteorite impact and experimental explosion craters, typical Martian craters, and all other lunar craters). Maars and tuff rings belong to neither group but are transitional. The classification criteria are four independent attributes of topographic geometry derived from seven descriptive variables by the principal-components transformation. Morphometric differences between crater bowl and raised rim constitute the strongest of the four components.

Pike, R. J.↗