Search NASA⌕ Search

SEARCH · Search NASA

Results for “negative capacitance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

From MEMRISTOR to MEMImpedance device

The behavior of the capacitance switching of HfO{sub 2} Resistive non-volatile Memories is investigated in view of realizing a MEMImpedance (MEM-Z) device. In such a Metal Insulator Metal structure, the impedance value can be tuned by the adjustment of both resistance and capacitance values. We observe a strong variation of capacitance from positive to negative values in a single layer Metal Insulator Metal device made of HfO{sub 2} deposited by Atomic Layer Deposition, but unfortunately no memory effect is observed. However, in the case of a two layer structure, a device has been obtained with a memory effect where both resistance and capacitance values can be tuned simultaneously, with a variation of capacitance down to negative values to get an inductive behavior. Negative capacitance values are observed for voltage values near SET voltage. A schematic model based on shaped oxygen vacancy density is proposed to account for this capacitance variation. The oxygen vacancies can be either isolated or connected in the bulk of the oxide.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Advanced microelectronics research for space applications, phase 2

Negative-resistance circuits with possible space flight applications are discussed. The basic design approach is to use impedance rotation, i.e., the conversion from capacitance to negative resistance, and from resistance to inductance by the phase shift of the transistor current gain at high frequencies. The subjects discussed in detail are the following: hybrid fabrication of VHF and UHF negative-resistance stages with lumped passive elements; formulation of measurement techniques to characterize transistors and to extend the frequency of negative-resistance transistor amplifiers to higher microwave frequencies; and derivation of transistor characteristics required to increase the frequency range of negative-resistance transistor stages.

Gaertner, W. W.↗

Measurement of the sheath capacitance of a planar probe

The sheath capacitance was measured on a planar probe dc-biased with respect to the plasma potential using the phase sensitive detection method in the region separated from the rf discharge plasmas by an immersed grid. It was observed that the sheath capacitance was negative when the collecting electrode of the probe was positioned downward toward the grid and biased near the plasma potential. This indicates that a double sheath had built up near the probe electrode. This tendency can be explained by the sheath capacitance, which is calculated using Poisson's equation with a non-zero electrical field and an ion velocity condition at the sheath edge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Side-gate modulation effects on high-quality BN-Graphene-BN nanoribbon capacitors

High-quality BN-Graphene-BN nanoribbon capacitors with double side-gates of graphene have been experimentally realized. The double side-gates can effectively modulate the electronic properties of graphene nanoribbon capacitors. By applying anti-symmetric side-gate voltages, we observed significant upward shifting and flattening of the V-shaped capacitance curve near the charge neutrality point. Symmetric side-gate voltages, however, only resulted in tilted upward shifting along the opposite direction of applied gate voltages. These modulation effects followed the behavior of graphene nanoribbons predicted theoretically for metallic side-gate modulation. The negative quantum capacitance phenomenon predicted by numerical simulations for graphene nanoribbons modulated by graphene side-gates was not observed, possibly due to the weakened interactions between the graphene nanoribbon and side-gate electrodes caused by the Ga{sup +} beam etching process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superior dielectric properties for template assisted grown (100) oriented Gd{sub 2}O{sub 3} thin films on Si(100)

We report about the single crystalline growth and dielectric properties of Gd{sub 2}O{sub 3}(100) thin films on Si(100) surface. Using a two step molecular beam epitaxy growth process, we demonstrate that controlled engineering of the oxide/Si interface is a key step to achieve the atypical (100) oriented growth of Gd{sub 2}O{sub 3}. Unusually, high dielectric constant values (∼23–27) were extracted from capacitance voltage measurements. Such effect can be understood in terms of a two dimensional charge layer at the Gd{sub 2}O{sub 3}/Si interface (W. Sitaputra and R. Tsu, Appl. Phys. Lett. 101, 222903 (2012)) which can influence the dielectric properties of the oxide layer by forming an additional negative quantum capacitance.

36 MATERIALS SCIENCE↗

Low-frequency dielectric properties of intrinsic and Al-doped rutile TiO{sub 2} thin films grown by the atomic layer deposition technique

Dielectric spectroscopy is carried out for intrinsic and aluminum-doped TiO{sub 2} rutile films which are deposited on RuO{sub 2} by the atomic layer deposition technique. Capacitance and conductance are measured in the 0.1 Hz–100 kHz range, for ac electric fields up to 1 MV{sub rms}/cm. Intrinsic films have a much lower dielectric constant than rutile crystals. This is ascribed to the presence of oxygen vacancies which depress polarizability. When Al is substituted for Ti, the dielectric constant further decreases. By considering Al-induced modification of polarizability, a theoretical relationship between the dielectric constant and the Al concentration is proposed. Al doping drastically decreases the loss in the very low frequency part of the spectrum. However, Al doping has almost no effect on the loss at high frequencies. The effect of Al doping on loss is discussed through models of hopping transport implying intrinsic oxygen vacancies and Al related centers. When increasing the ac electric field in the MV{sub rms}/cm range, strong voltage non-linearities are evidenced in undoped films. The conductance increases exponentially with the ac field and the capacitance displays negative values (inductive behavior). Hopping barrier lowering is proposed to explain high-field effects. Finally, it is shown that Al doping strongly improves the high-field dielectric behavior.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrical properties of hybrid (ferromagnetic metal)-(layered semiconductor) Ni/p-GaSe structures

Two-barrier Ni/n-Ga2Se3/p-GaSe structures with nanoscale Ni-alloy grains caused by reactions at the 'metal-layered semiconductor' interface were formed after growing Ni layers on the p-GaSe (0001) surface. Current-voltage and capacitance-voltage characteristics of hybrid structures were studied in the temperature range of 220-350 K. The dependence of the impedance spectra on the bias voltage was studied at various temperatures. The frequency dependences of the impedance at high frequencies (f = 10{sup 6} Hz) are discussed in terms of the phenomena of spin injection and extraction in structures with an ultrathin spin-selective Ni/n-Ga{sub 2}Se{sub 3} barrier and the effects of spin diffusion and relaxation in the semiconductor substrate. The room-temperature phenomena of the Coulomb blockade and negative differential capacitance were detected. These phenomena are explained based on an analysis of transport processes in a narrow region near the 'ferromagnetic metal-semiconductor' interface, where nanoscale grains are arranged.

36 MATERIALS SCIENCE↗

Hydrogen-induced tunable remanent polarization in a perovskite nickelate

Materials with field-tunable polarization are of broad interest to condensed matter sciences and solid-state device technologies. Here, using hydrogen (H) donor doping, we modify the room temperature metallic phase of a perovskite nickelate NdNiO 3 into an insulating phase with both metastable dipolar polarization and space-charge polarization. We then demonstrate transient negative differential capacitance in thin film capacitors. The space-charge polarization caused by long-range movement and trapping of protons dominates when the electric field exceeds the threshold value. First-principles calculations suggest the polarization originates from the polar structure created by H doping. We find that polarization decays within ~1 second which is an interesting temporal regime for neuromorphic computing hardware design, and we implement the transient characteristics in a neural network to demonstrate unsupervised learning. These discoveries open new avenues for designing ferroelectric materials and electrets using light-ion doping.

36 MATERIALS SCIENCE↗

Ferro-ionic states and domains morphology in Hf x Zr 1–x O 2 nanoparticles

Unique polar properties of nanoscale hafnia-zirconia oxides (Hf x Zr 1–x O 2 ) are of great interest for condensed matter physics, nanophysics, and advanced applications. These properties are connected (at least partially) to the ionic–electronic and electrochemical phenomena at the surface, interfaces, and/or internal grain boundaries. Here, we calculated the phase diagrams, dielectric permittivity, spontaneous polar, and antipolar ordering, as well as the domain structure morphology in Hf x Zr 1–x O 2 nanoparticles covered by ionic–electronic charge originating from surface electrochemical adsorption. We revealed that the ferro-ionic coupling supports the polar long-range order in nanoscale Hf x Zr 1–x O 2 , induces, and/or enlarges the stability region of the labyrinthine domains toward smaller sizes and smaller environmental dielectric constant at low concentrations of the surface ions. The ferro-ionic coupling causes the transition to the single-domain ferro-ionic state at high concentrations of the surface ions. We predict that the labyrinthine domain states, being multiple-degenerated, may significantly affect the emergence of the negative differential capacitance state in the nanograined/nanocrystalline Hf x Zr 1–x O 2 films.

36 MATERIALS SCIENCE↗

Increase in the Shockley–Read–Hall recombination rate in InGaN/GaN QWs as the main mechanism of the efficiency droop in LEDs at high injection levels

It is shown that the efficiency droop observed as the current through a GaN-based light-emitting diode increases is due to a decrease in the Shockley–Read–Hall nonradiative lifetime. The lifetime decreases with increasing current because a steadily growing number of traps in the density-of-states tails of InGaN/GaN quantum wells become nonradiative recombination centers upon the approach of quasi-Fermi levels to the band edges. This follows from the correlation between the efficiency droop and the appearance of negative differential capacitance, observed in the study. The correlation appears due to slow trap recharging via the trap-assisted tunneling of electrons through the n-type barrier of the quantum well and to the inductive nature of the diode-current variation with forward bias.

36 MATERIALS SCIENCE↗

Note: Expanding the bandwidth of the ultra-low current amplifier using an artificial negative capacitor

The bandwidth and low noise characteristics are often contradictory in ultra-low current amplifier, because an inevitable parasitic capacitance is paralleled with the high value feedback resistor. In order to expand the amplifier’s bandwidth, a novel approach was proposed by introducing an artificial negative capacitor to cancel the parasitic capacitance. The theory of the negative capacitance and the performance of the improved amplifier circuit with the negative capacitor are presented in this manuscript. The test was conducted by modifying an ultra-low current amplifier with a trans-impedance gain of 50 GΩ. The results show that the maximum bandwidth was expanded from 18.7 Hz to 3.3 kHz with more than 150 times of increase when the parasitic capacitance (∼0.17 pF) was cancelled. Meanwhile, the rise time decreased from 18.7 ms to 0.26 ms with no overshot. Any desired bandwidth or rise time within these ranges can be obtained by adjusting the ratio of cancellation of the parasitic and negative capacitance. This approach is especially suitable for the demand of rapid response to weak current, such as transient ion-beam detector, mass spectrometry analysis, and fast scanning microscope.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Linking stem rehydration kinetics to hydraulic traits using a novel method and mechanistic model

Background: Despite the recognized importance of hydraulic capacitance as a mechanism used by plants to maintain hydraulic functioning during high transpiration, characterizing the dynamics of capacitance remains a challenge. Methods: For this work, we used a novel ‘two-balance method’ to investigate relationships between stem rehydration kinetics and other hydraulic traits in multiple tree species, and we developed a model to explore stem rehydration kinetics further. Key Results: We found that: (1) rehydration time constants and the amount of water uptake occurring during rehydration differed significantly across species; (2) time constants did not change with declining water potential (Ψ), while water uptake increased at lower Ψ in some species; (3) longer time constants were associated with lower wood density, higher capacitance and less negative stem pressures causing 50 % loss of hydraulic conductivity (P 50 ); (4) greater water uptake occurred in stems with lower wood density and less negative P 50 values; and (5) the model could estimate the total hydraulic resistance of the rehydration path, which cannot be measured directly. Conclusions: Overall, the two-balance method can be used to examine rehydration dynamics quickly and thoroughly in detached woody stems. This method has the potential to improve our understanding of how capacitance functions across tree species, which is an often-overlooked component of whole-plant hydraulics.

54 ENVIRONMENTAL SCIENCES↗

Dissolved CO 2 Modulates the Electrochemical Capacitance on Gold Electrodes

The presence of CO 2 at an electrified interface between an aqueous electrolyte and a metal electrode is the prerequisite for many electrochemical CO 2 capture technologies. To understand the behavior of dissolved CO 2 at an aqueous electrified interface, we characterized the electrochemical interface of planar gold electrodes with cyclic voltammetry, electrochemical impedance spectroscopy (EIS), electrochemical surface plasmon resonance (EC–SPR), and attenuated total reflectance surface-enhanced infrared spectroscopy (ATR–SEIRAS). Under all investigated conditions, we observed a decrease in the electrochemical capacitance upon saturation of the electrolyte with CO 2 , as compared to an electrolyte saturated with Ar. EIS and EC–SPR showed that this capacitance reduction was also potential dependent: it reached a minimum near the point of zero charge and became more significant as the applied potential moved further away from the point of zero charge. Hybrid quantum–classical simulations of the gold/aqueous electrolyte interface indicate that bicarbonate decreases the capacitance and modifies the composition of the electric double layer. In addition to the binding of bicarbonate under positive bias, we propose that molecular CO 2 can be induced by applied potential to concentrate in the diffuse layer of the electric double layer, leading to a reduction in the electrochemical capacitance under both negative and positive bias. Furthermore, this work advances the understanding of non-Faradaic effects of dissolved CO 2 at aqueous electrified interfaces of relevance for electrochemical CO 2 capture.

25 ENERGY STORAGE↗

Charge trapping properties of Ge nanocrystals grown via solid-state dewetting

In the present work, we report on the charge trapping properties of Germanium Nanocrystals (Ge NCs) self assembled on SiO 2 thin layer for promising applications in next-generation non volatile memory by the means of Deep Level Transient Spectroscopy (DLTS) and high frequency C-V method. The Ge NCs were grown via dewetting phenomenon at solid state by Ultra-High Vacuum (UHV) annealing and passivated with silicon before SiO 2 capping. The role of the surface passivation is to reduce the electrical defect density at the Ge NCs-SiO 2 interface. The presence of the Ge NCs in the oxide of the MOS capacitors strongly affects the C-V characteristics and increases the accumulation capacitance, causes a negative flat band voltage (VFB) shift. The DLTS has been used to study the individual Ge NCs as a single point deep level defect in the oxide. DLTS reveals two main features: the first electron traps around 255 K could correspond to dangling bonds at the Si/SiO2 interface and the second, at high-temperature (>300 K) response, could be originated from minority carrier generation in Ge NCs.

36 MATERIALS SCIENCE↗

Electrochemical Kinetics of SEI Growth on Carbon Black: Part I. Experiments

Growth of the solid electrolyte interphase (SEI) is a primary driver of capacity fade in lithium-ion batteries. Despite its importance to this device and intense research interest, the fundamental mechanisms underpinning SEI growth remain unclear. In Part I of this work, we present an electroanalytical method to measure the dependence of SEI growth on potential, current magnitude, and current direction during galvanostatic cycling of carbon black/Li half cells.We find that SEI growth strongly depends on all three parameters; most notably, we find SEI growth rates increase with nominal C rate and are significantly higher on lithiation than on delithiation. We observe this directional effect in both galvanostatic and potentiostatic experiments and discuss hypotheses that could explain this observation. This work identifies a strong coupling between SEI growth and charge storage (e.g., intercalation and capacitance) in carbon negative electrodes.

25 ENERGY STORAGE↗

Low noise tuned amplifier

A bandpass amplifier employing a field effect transistor amplifier first stage is described with a resistive load either a.c. or directly coupled to the non-inverting input of an operational amplifier second stage which is loaded in a Wien Bridge configuration. The bandpass amplifier may be operated with a signal injected into the gate terminal of the field effect transistor and the signal output taken from the output terminal of the operational amplifier. The operational amplifier stage appears as an inductive reactance, capacitive reactance and negative resistance at the non-inverting input of the operational amplifier, all of which appear in parallel with the resistive load of the field effect transistor.

Kleinberg, L. L.↗

Material considerations for high frequency, high power capacitors

Dielectric materials chosen for use in this high frequency, high power capacitor must endure hard vacuum conditions, high currents (up to 125 A rms), and frequencies up to 40 kHz. Temperature requirements for this type of capacitor are that capacitor operation must be efficient up to 125 C. A more stringent requirement for the sold dielectric is that the temperature coefficient of dissipation factor should indicate self stabilization well below 125 C. In addition, the dielectric temperature coefficient of capacitance should be negative.

White, W.↗