Search NASA⌕ Search

SEARCH · Search NASA

Results for “negative resistance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Stability enhancement module for grid-following converters: Hardware implementation and validation

Low-frequency oscillations limit power delivery of voltage-source converter interfaced resources, for example, wind and solar, operating in grid-following control mode. Our prior research identified the instability mechanism as the coupling between real power and voltage at point of common coupling. In turn, a stability enhancement control was proposed to weaken the coupling by introducing a simple voltage-based feedback loop. The stability enhancement control has been validated via electromagnetic transient simulation testbeds. The objectives of this paper are (a) to provide a more insightful explanation of the enhancement module by examining the impedance of the grid-following converter and (b) to verify the performance of the stability module using a hardware testbed. The theoretic examination demonstrates that stability enhancement module effectively reduces the negative resistance effect of $Z_{qq}$ and thus boosts stability. The experimental research leads to a hardware testbed of a grid-following converter with the ability of demonstrating low-frequency oscillations. Finally, the experimental results demonstrate the efficacy of the proposed stability enhancement control and the readiness of commercial realization of the stability enhancement unit.

42 ENGINEERING↗
DOE OSTI2023

Coherent fluctuations in a partially magnetized small magnetron discharge operating on molecular nitrogen

We report experimental data on rotating plasma disturbances in a quasi-steady direct-current magnetron discharge operating with molecular nitrogen at pressures of 27, 40, 67, and 133 Pa. Experiments with a segmented anode measuring the local current flow reveal up to 12 coherent structures (“spokes”) propagating in the +E×B and −E×B azimuthal directions. The current–voltage characteristics are studied and found to follow a negative resistance profile at the lower discharge currents. The existence of coherent structures and the number of spokes observed depend on the discharge current and operating pressure. Lower pressures are more favorable to the retrograde −E×B spoke rotation, which is observed in the 27, 40, and 67 Pa discharges. The results are interpreted with a gradient-driven drift wave model, and using the dispersion relation, we show that the propagation direction depends on the orientation of the local electric field within the plasma. Using an electron fluid model, we show how experimental conditions can lead to field reversals that generate −E×B spoke rotation in the lower pressure discharges.

Physics↗
DOE OSTI2023

Impedance Modeling and Stability Analysis for the PLL-less and Voltage Sensor-less Grid-tied Converters

The newly developed control methodology, which omits the phase-locked loop (PLL) and voltage sensor, has garnered considerable attention for its rapid dynamic response and reduced hardware expenses. Nonetheless, its stability concerns have not yet been thoroughly scrutinized. In this paper, the impedance modeling of the PLL-less and voltage sensorless control strategy has been established. The impedance model has been contrasted with the traditional PLL-based control scheme. Our findings demonstrate that the PLL-less and voltage sensorless control approach lacks the negative resistance behavior that is frequently observed in the traditional scheme, which results in unstable operations. Furthermore, the role of virtual resistance has been examined. To substantiate the aforementioned findings, simulation results are presented.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Characterization of Impedance and Stability for Doubly-Fed Induction Generator Based on Voltage-Modulated Direct Power Control

Voltage-modulated direct power control (VM-DPC) applied to the doubly-fed induction generator (DFIG) offers superior steady-state and transient performance but remains underexplored for suppressing wideband oscillations. Here, this article proposes a comprehensive impedance for the VM-DPC-based DFIG, analyzing its impedance characteristics and stability mechanisms compared with the DFIG based on vector-oriented control (VOC). The unified power transfer function is defined for DFIGs employing VM-DPC or VOC to ensure consistent comparison benchmarks. The comprehensive impedance of VM-DPC-based DFIG, incorporating mechanical and grid-side converter (GSC) dynamics, is derived using complex vector modeling in the αβ -frame. Furthermore, the influence of VM-DPC parameters and grid strength on the stability of grid-connected DFIG systems is assessed through eigenvalue trajectory analysis. Impedance analysis reveals the significant contributions of mechanical and GSC dynamics to DFIG impedance, as well as the narrower frequency range of negative resistance in the VM-DPC-based DFIG compared to the VOC-based DFIG. Stability analysis identifies the VM-DPC parameters of the rotor-side converter as dominant factors affecting system stability and confirms that the VM-DPC-based DFIG achieves better stability under weak grid conditions than its VOC-based counterpart. These findings are validated through simulations and experiments.

42 ENGINEERING↗
NASA NTRS1970

Constant current load matches impedances of electronic components

Constant current load with negative resistance characteristics actively compensates for impedance variations in circuit components. Through a current-voltage balancing operation the internal impedance of the diodes is maintained at a constant value. This constant current load circuit can be used in simple telemetry systems.

Alexander, R. M.↗
NASA NTRS1971

Characteristics of NbN Dayem bridges

NbN Dayem bridge characteristics, discussing negative resistance region, self induced subharmonic current steps, temperature dependence and microwave radiation effects

Blaugher, R. D.↗
NASA NTRS1971

Micropower active filters for vhf applications

High Q micropower filters for VHF applications based on conditionally stable negative resistance operation, describing computer-aided design, construction and performance

Gaertner, W. W.↗
NASA NTRS1974

Ultra-stable oscillator with complementary transistors

A high frequency oscillator, having both good short and long term stability, is formed by including a piezoelectric crystal in the base circuit of a first bi-polar transistor circuit, the bi-polar transistor itself operated below its transitional frequency and having its emitter load chosen so that the input impedance, looking into the base thereof, exhibits a negative resistance in parallel with a capacitive reactance. Combined with this basic circuit is an auxiliary, complementary, second bi-polar transistor circuit of the same form with the piezoelectric crystal being common to both circuits. By this configuration small changes in quiescent current are substantially cancelled by opposite variations in the second bi-polar transistor circuit, thereby achieving from the oscillator a signal having its frequency of oscillation stable over long time periods as well as short time periods.

Kleinberg, L. L.↗
NASA NTRS1974

Millimeter wave pumped parametric amplifier

A negative resistance parametric amplifier is reported that employs a discrete varactor diode for high frequency pump excitation in the millimeter wave range.

Dickens, L. E.↗
NASA NTRS1975

The solid-state Ku-band power amplifier

A survey of IMPATT diodes and negative resistance amplifiers is presented. The first phase of the amplifier effort is discussed in which a single diode reflection amplifier delivering 0.5 watt at 15 GHz with 10-dB gain over a 1-GHz band was developed. The design of a dominant mode resonant combiner is described along with the characterization of the IMPATT diodes. Results are given on the complete amplifier and on the thermal and graceful failure characteristics of the unit.

Geller, B. D.↗
NASA NTRS1974

A high performance line regulator

The present work describes the design of a 10-kHz, 500-W switching buck type regulator used as a line regulator in a power conditioner for an ion thruster. The frequency response of the switching regulator had to be raised beyond the resonant frequency of the output LC filter to produce a positive total network impedance and prevent negative resistance oscillation. Analysis of this stability problem is given.

Cardwell, G. I.↗
NASA NTRS1975

Relationships among classes of self-oscillating transistor parallel inverters

It recently has been shown in the literature that many dc-to-square-wave parallel inverters which are widely used in power-conditioning applications can be grouped into one of two families. Each family is characterized by an equivalent RLC network. Based on this approach, a classification procedure is presented for self-oscillating parallel inverters which makes evident natural relationships which exist between various inverter configurations. By utilizing concepts from the basic theory of negative resistance oscillators and the principle of duality as applied to nonlinear networks, a chain of relationships is established which enables a methodical transfer of knowledge gained about one family of inverters to any of the other families in the classification array.

Wilson, T. G.↗
NASA NTRS1977

UHF/microwave oscillator/amplifier

Circuit uses tunnel diode as negative resistance and bipolar transistor as an active device in conjunction with resistors and capacitors. Transistor provides inductance required to produce oscillation and tuning. Output is taken from transistor collector and avoids unwanted characteristics of two-terminal oscillator/amplifier.

Kleinberg, L. L.↗
NASA NTRS1982

Fabrication techniques for superconducting readout loops

Procedures for the fabrication of superconducting readout loops out of niobium on glass substrates were developed. A computer program for an existing fabrication system was developed. Both positive and negative resist procedures for the production of the readout loops were investigated. Methods used to produce satisfactory loops are described and the various parameters affecting the performance of the loops are analyzed.

Payne, J. E.↗
NASA NTRS1987

Some dynamical properties of very strong double layers in a triple plasma device

Dynamical properties of very strong double layers seen in a differentially pumped triple plasma device are reported. These double layers are V-shaped. The following findings are discussed: (1) Disruptions in the double layer potential and in the plasma current occur when an inductance is placed in series with the bias supply between the sources in the external circuit. These disruptions, which can be highly periodic, are the result of a negative resistance region. (2) When reactances in the circuit are minimized, the double layer exhibits a jitter motion in position approximately equal to the double layer thickness. (3) When the bias between the sources is rapidly turned on, the initial phase in the double layer formation is the occurrence of a constant electric field for the first few microseconds. First the apparatus used in all of the work is discussed and then each of the three phenomena are considered.

Carpenter, T.↗