Search NASA⌕ Search

SEARCH · Search NASA

Results for “new markets”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Results of NASA Technical Challenge to Demonstrate Two-Speed Drive for Vertical Lift Vehicle

Currently, manned vertical lift vehicles are flown in a manner such that the rotors operate over a narrow range of rotating speed regardless if the vehicle's flight condition is one of vertical takeoff and landing, hover, or forward cruise. The propulsion systems are optimized for operation at the same, corresponding narrow range of rotor speed. However, certain missions and markets benefit greatly if the rotor speed can be adjusted over a wide range of speed to match demands of different missions and flight regimes. A vehicle that can operate with a wide range of rotor speeds would address key barriers to enable new markets and missions for vertical lift vehicles. Key barriers addressed by the wide-range of rotor speed include noise reduced via lower rpm rotor, increase of maximum forward flight speed, increased payload and range, reduced fuel burn, and lower operating costs. A new paradigm for the propulsion system is needed to enable these key benefits. One viable approach is to make use of a two-speed ratio drive system such that the engine can continue to operate over a narrow speed range, whereby engine performance is optimal, while adjusting the rotor speed as needed using the two-speed drive system. Motivated by such needs and by results of several system studies, a NASA Revolutionary Vertical Lift Technology Challenge was established to develop and demonstrate required technologies and designs for achieving a 50% reduction in rotor rpm via a two-speed drive system that incurs less than 2% power loss and maintains current power-to-weight ratios. The technical challenge work was completed and the technical objectives were achieved. This report describes the motivations, the research approach and the significant outcomes.

Transmissions↗
NASA NTRS1998

The X-33/VentureStar Program

The VentureStar reusable launch vehicle is discussed in this viewgraph presentation. The objectives of the VentureStar program are reviewed: (1) expendables cost too much, (2) commercial space market is growing (3) meets NASA's goals, (4) Users want fast ground turnaround, (5) users want quick access to space, (6) the offline payload processing saves time, (7) low cost access to space will enable new markets. Flight tests of the X-33, which was designed to test the technology and is pictured in several slides, built credibility for VentureStar. One slide shows the dimensions, weight, length, LEO payload capacity, and the propulsion, in comparison for the X-33, the VentureStar, the Space Shuttle, the Proton D-1e, and the Ariane V. Yet other slides outline the vehicle's features, the plan for the operation of the vehicle, from the runway, to the pad, to orbit. The planned containerized payload operation will allow for a 7 day turnaround for the system, which will allow for the planned 40 flights per year.

Laube, J.↗
NASA NTRS1981

Remote sensing for forest applications in New York: Two case studies

Under-utilized forest resources in the Northeast can supply fiber to new markets. Information on forest resources, however, is often too aggregated to estimate available woody material with sufficient detail for planning specific projects. Over the past year, staff of Cornell University's Remote Sensing Program, under a grant from NASA, assisted New York State agency personnel by assessing available woody material for two potential development projects, a wood-fired power plant and a particle board manufacturing plant. These feasibility studies are reviewed, illustrating how information derived from high-altitude aircraft photographs, LANDSAT imagery, and available supporting data were integrated to arrive at estimates of woody material.

Stanturf, J. A.↗
NASA NTRS1990

MSAT: A booster for land based mobile radiocommunication networks?

It is demonstrated that the foreseen phenomenal growth of mobilesat services will impact positively existing terrestrial mobile radio services. Mobilesat systems will not displace the existing terrestrial market in the near future, partly due to the high cost of their terminal units and associated airtime, but also due to some technical limitations, such as lack of spectrum efficiency and high susceptibility to shadowing. However, the ubiquity of mobilesat services will open new market to terrestrial radio technologies. The latter is expected to be the most economical way of extending locally mobilesat services to many users. Conversely, mobilesat systems will be used to extend the capabilities of terrestrial radio systems in areas where the former cannot be implemented cost effectively. It is believed that terrestrial mobile network operators using these service extension capabilities will have a competitive advantage over those who do not. Overall, it is expected that emerging mobilesat services, far from being a threat to terrestrial radio systems, will rather provide these with numerous opportunities of incrementing their base market.

Boulay, Guy↗
DOE OSTI2026

U.S. Department of Energy (DOE) Enabling Extreme Real-Time Grid Integration of Solar Energy (ENERGISE) Project: Multiday and Intraday Energy Availability Product [Slides]

This presentation will provide an overview of the development of a Multi-Day Energy Availability Product under the DOE ENERGISE project, conducted in collaboration with Southwest Power Pool (SPP), the National Laboratory of the Rockies, Polaris, and the Electric Power Research Institute (EPRI). Existing market clearing processes are limited to day-ahead and real-time horizons, which may result in insufficient pricing signals and compensation for resource availability over multi-day timeframes (e.g., incentives for fuel procurement and energy-limited resource preparedness). This effort aims to develop a new market product and associated clearing process to value and procure resource energy availability over a multi-day horizon. The team will present progress to date and solicit advisory group feedback on proposed methodologies and preliminary findings.

14 SOLAR ENERGY↗
DOE OSTI2023

Building Environmental Justice and Equity into the Development of Critical Mineral Industries

The global transition toward low-carbon energy not only means an increase in demand for clean electricity and renewable resources, but also an increase in demand for the critical minerals (CMs) and rare earth elements (REEs) that these technologies rely upon. Indeed, low-carbon energy technologies, such as those used for wind turbines and electric vehicle motors, require significantly more lithium, nickel, cobalt, manganese, graphite, and other CMs than fossil-based energy technologies. The growing demand for new forms of low- carbon energy will necessitate a proportional scale-up of CM and REE extraction and processing. Presently, the majority of extraction and processing activities for CMs and REEs are concentrated in very few countries, primarily in China and the Global South. CM and REE supply chain activities conducted in or controlled by these countries are commonly associated with widespread and well- documented human rights abuses and environmental degradation. As a result of concerns related to supply chain security, worker welfare, and the overall need for additional sources of CMs and REEs, governments worldwide have begun to explore policy pathways for the development of new supply chains. The development of new supply chains for CMs and REEs re s a multifold opportunity to accelerate the global deployment of low-carbon energy fleets, reduce global carbon emissions, build political resilience—and also to enhance policy objectives of environmental justice and equity in the clean energy transition. Fulfilling these policy objectives requires energy producers to navigate a maze of global supply chain policies designed to shape and accelerate the growth of new markets. In the United States, for instance, President Biden recently implemented fiscal and trade policies that incentivize both domestic and global reliance on U.S.-produced CMs and REEs, leveraging key relationships in Asia and Europe to ensure the accelerated buildout of the U.S. supply chain. The Biden Administration’s framework also emphasizes that new supply chains for CMs, REEs, and other low-carbon energy pathways must generate benefits for marginalized and disadvantaged communities, build energy equity, and contribute to the Biden Administration’s vision of environmental justice. present CM and REE supply chains include several stages, including mining, processing, transport, utilization, and disposal, each of which involves different environmental justice considerations and potential injustices. This study explores how technical innovation, paired with responsible community engagement and empowerment, can help inform the development of energy equity and environmental justice at all stages of new supply chains. The study highlights these opportunities on a broad scale. We also lend a specific focus to research at the University of Wyoming School of Energy Resources that aims to guide the development of CM and REE industries in communities with high economic dependence on coal and other fossil fuel industries, identifying pathways to grow a U.S. domestic supply chain by producing CMs from coal, coal by-products, and coal waste streams. These production pathways represent a potential new supply for CMs across the U.S. and elsewhere, thereby enhancing national security and accelerating the widespread deployment of low-carbon energy technologies, while also generating alternative applications for remaining coal reserves and aiding in a just transition for rural energy-producing communities.

Gerace, Selena↗
DOE OSTI2024

Evolving Competitive Markets in SAPP: Leveraging Competitive Wholesale Electricity Markets to Drive Renewable Generation Capacity in the Southern African Power Pool (SAPP)

The SADC region has significant natural resource potential to increase renewable energy generation, improve electricity reliability, and support economic development. This research finds an apparent lack of confidence from electricity infrastructure investors in SAPP wholesale electricity markets, which increases risk perception and lowers the likelihood of capital deployment. With respect to free market fundamentals, competitive market obstacles and renewable energy development obstacles are characterized. Stakeholders identified the top obstacles to well-functioning competitive markets as insufficient transmission infrastructure for interconnection and regional movement of electricity, dominance of national single-buyer markets, and lack of or weak nation-state regulatory frameworks. Stakeholders prioritized the top three obstacles for renewable energy development as a lack of viable commercial arrangements for variable renewable energy (VRE) balancing, lack of functional and consistent nation-level regulations, and higher project costs related to reliance on imported equipment. With respect to potential solution options, stakeholders prioritized the development of new cost allocation and finance methods to facilitate new transmission expansion, training to educate new or potential new market entrants on SAPP processes, as well as modeling and analysis of regional SAPP participation benefits disaggregated to the nation-state level. From these perspectives, this research identified strategy options for consideration including transitioning SAPP to a regional transmission operator (RTO) for operation and planning of cross-border transmission facilities and market administration, shifting operations of SAPP member transmission systems to Independent System Operators (ISOs), establishing a regional regulatory authority and enhancing market data transparency. Implementing these reforms is expected to be challenging, but not insurmountable, given the domestic political, legal, and jurisdictional complexities of the SADC region.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRSDate not supplied

Scale Resolving Jet Simulations to Reduce Airport Noise

- An emerging potential market has generated renewed interest in civil supersonic aircraft - Evidenced by the appearance of several commercial programs despite lack of standards for en route noise or landing and takeoff noise - Overland Flight Restrictions based on unacceptable sonic boom noise are viewed as the main barrier to this vision - National Research and Policy agencies play a central role in developing the data needed for the regulation change that is essential to enabling this new market - The vision of the Supersonics Community is a future where fast air travel is available for a broad spectrum of the traveling public - Future supersonic aircraft will not only be able to fly overland without creating an “unacceptable situation” but compared to Concorde and SST will be efficient, affordable, and environmentally responsible

ARMD↗
NASA NTRS2002

Innovative Airbreathing Propulsion Concepts for High-speed Applications

The current cost to launch payloads to low earth orbit (LEO) is approximately loo00 U.S. dollars ($) per pound ($22000 per kilogram). This high cost limits our ability to pursue space science and hinders the development of new markets and a productive space enterprise. This enterprise includes NASA's space launch needs and those of industry, universities, the military, and other U.S. government agencies. NASA's Advanced Space Transportation Program (ASTP) proposes a vision of the future where space travel is as routine as in today's commercial air transportation systems. Dramatically lower launch costs will be required to make this vision a reality. In order to provide more affordable access to space, NASA has established new goals in its Aeronautics and Space Transportation plan. These goals target a reduction in the cost of launching payloads to LEO to $lo00 per pound ($2200 per kilogram) by 2007 and to $100'~ per pound by 2025 while increasing safety by orders of magnitude. Several programs within NASA are addressing innovative propulsion systems that offer potential for reducing launch costs. Various air-breathing propulsion systems currently are being investigated under these programs. The NASA Aerospace Propulsion and Power Base Research and Technology Program supports long-term fundamental research and is managed at GLenn Research Center. Currently funded areas relevant to space transportation include hybrid hyperspeed propulsion (HHP) and pulse detonation engine (PDE) research. The HHP Program currently is addressing rocket-based combined cycle and turbine-based combined cycle systems. The PDE research program has the goal of demonstrating the feasibility of PDE-based hybrid-cycle and combined cycle propulsion systems that meet NASA's aviation and access-to-space goals. The ASTP also is part of the Base Research and Technology Program and is managed at the Marshall Space Flight Center. As technologies developed under the Aerospace Propulsion and Power Base Research and Technology Program mature, they are incorporated into ASTP. One example of this is rocket-based combined cycle systems that are being considered as part of ASTP. The NASA Ultra Efficient Engine Technology (UEET) Program has the goal of developing propulsion system component technology that is relevant to a wide range of vehicle missions. In addition to subsonic and supersonic speed regimes, it includes the hypersonic speed regime. More specifically, component technologies for turbine-based combined cycle engines are being developed as part of UEET.

Whitlow, Woodrow, Jr.↗
DOE OSTI2024

Select Proliferation Studies on TRISO-fueled, Heat-Pipe-cooled Microreactors

Nuclear microreactors carry the potential to open up new markets for the nuclear industry, as their expected cost competitiveness in non-traditional market segments (e.g., mines, military bases, extraterrestrial surfaces, and remote areas), and their inherent safety features make them deployable when other power sources are unavailable or difficult to exploit. For countries that have not traditionally participated in nuclear power, microreactors represent a clean energy solution [1]. However, their use, especially in non-weapons states, may entail challenges in terms of maintaining international nuclear safeguards [2]. Furthermore, the deployment locations where microreactors may prove most cost competitive would be difficult to access by state and International Atomic Energy Agency (IAEA) inspectors [3]. In addition to the isolated nature of potential deployment sites, the low-power characteristic of microreactors suggests that numerous microreactors would need to be deployed to meet energy demands. That, coupled with the unique physics of many current microreactor designs, opens up a new area of research with respect to nonproliferation and safeguards concerns [2]. Whereas traditional facilities are inspected as isolated cases when looking for signs of diversion or misuse; microreactors may need to be assessed in the context of the entire fleet to which they belong. International safeguards necessitate timely detection of any significant quantities (SQs) of material that are being diverted (e.g., 1 SQ of special nuclear material diverted over the course of a 1-year period) [4]. For low-enriched uranium, the IAEA defines 1 SQ as corresponding to 75 kg of 235U. The purpose of the present paper is to explore the detectability threshold for material diversion in microreactors by relying on critical control drum angles, excess reactivity, and the reactor lifetime as the selected operational parameters. For this assessment, a heat-pipe-cooled microreactor was regarded as the base design. While the conclusions reached in this paper are not readily extendable to the design of actual microreactors, the analysis herein enables conclusions to be drawn regarding the level of accuracy needed for reference calculations in order to detect diversion scenarios by utilizing the selected operational parameters (i.e., mainly control drum angles, critical insertion angle, and the reactor lifetime).

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS2019

Prototyping Operational Autonomy for Space Traffic Management

Current state of the art in Space Traffic Management (STM) relies on a handful of providers for surveillance and collision prediction, and manual coordination between operators. Neither is scalable to support the expected 10x increase in spacecraft population in less than 10 years, nor does it support automated manuever planning. We present a software prototype of an STM architecture based on open Application Programming Interfaces (APIs), drawing on previous work by NASA to develop an architecture for low-altitude Unmanned Aerial System Traffic Management. The STM architecture is designed to provide structure to the interactions between spacecraft operators, various regulatory bodies, and service suppliers, while maintaining flexibility of these interactions and the ability for new market participants to enter easily. Autonomy is an indispensable part of the proposed architecture in enabling efficient data sharing, coordination between STM participants and safe flight operations. Examples of autonomy within STM include syncing multiple non-authoritative catalogs of resident space objects, or determining which spacecraft maneuvers when preventing impending conjunctions between multiple spacecraft. The STM prototype is based on modern micro-service architecture adhering to OpenAPI standards and deployed in industry standard Docker containers, facilitating easy communication between different participants or services. The system architecture is designed to facilitate adding and replacing services with minimal disruption. We have implemented some example participant services (e.g. a space situational awareness provider/SSA, a conjunction assessment supplier/CAS, an automated maneuver advisor/AMA) within the prototype. Different services, with creative algorithms folded into then, can fulfil similar functional roles within the STM architecture by flexibly connecting to it using pre-defined APIs and data models, thereby lowering the barrier to entry of new players in the STM marketplace. We demonstrate the STM prototype on a multiple conjunction scenario with multiple maneuverable spacecraft, where an example CAS and AMA can recommend optimal maneuvers to the spacecraft operators, based on a predefined reward function. Such tools can intelligently search the space of potential collision avoidance maneuvers with varying parameters like lead time and propellant usage, optimize a customized reward function, and be implemented as a scheduling service within the STM architecture. The case study shows an example of autonomous maneuver planning is possible using the API-based framework. As satellite populations and predicted conjunctions increase, an STM architecture can facilitate seamless information exchange related to collision prediction and mitigation among various service applications on different platforms and servers. The availability of such an STM network also opens up new research topics on satellite maneuver planning, scheduling and negotiation across disjoint entities.

space traffic management↗
DOE OSTI2024

Battery-powered bargains? Assessing electric vehicle resale value in the United States

Abstract The resale market will play a critical role in expanding plug-in electric vehicle (PEV) adoption to middle- and lower-income households. Understanding PEV depreciation trends in comparison to those of conventional gasoline vehicles (CVs) is critical for assessing PEV affordability and informing relevant policy, such as subsidies for used PEVs. We deliver comprehensive, high-resolution estimates of value retention rates at the make-model level in the United States for battery electric vehicles (BEVs), plug-in hybrid electric vehicles (PHEVs), hybrid electric vehicles (HEVs), and CVs using a database of 9 million used cars listed online between 2016 and 2022. While BEVs and PHEVs have depreciated at faster rates than CVs, this trend is changing, with newer model year BEVs and those with larger ranges have significantly higher retention rates than older model years with smaller ranges. Tesla BEVs are a notable exception following the opposite trend, with earlier model years holding their value better than newer model years. Subsidized BEVs in the new market are associated with lower prices for the same model in the resale market, with the $7500 federal subsidy translating to a 3% lower resale price on average. Finally, disruptions from the COVID-19 pandemic have affected affordability across all vehicles, with mean listing prices rising 37% and 39% for CVs and BEVs, respectively, from January 2020 to March 2022 in inflation-adjusted 2019 dollars.

Environmental Sciences & Ecology↗
DOE OSTI2024

Ad-Mat: Adaptations of Mature Manufacturing Strategies for Accelerated Redox Flow Battery Deployment

The concept of the Ad-Mat approach is to leverage existing adjacent markets across a broad scope of technologies in order to reduce the manufacturing learning curve and ultimately accelerate redox flow battery (RFB) deployment at scale. Lithium-ion batteries (LIBs) are currently the dominant energy storage technology, and they came to technological maturity under unique market conditions when there was no meaningful competition in the consumer electronic and electric vehicle (EV) space. Today, alternative chemistries that may be technologically better-suited for long-duration storage applications are experiencing a high barrier to entry. This is in large part due to the substantial bias towards the scaled-up production and supply chain that now exists for LIBs. In the case of RFBs in particular, numerous analyses have suggested that RFBs should theoretically have a much lower system cost than LIBs - however, this relies on a mature and competitive manufacturing landscape, which has been extremely challenging to achieve for both flow batteries and other LIB competitors. At the moment, LIB alternatives tend to have isolated small-scale manufacturing pathways, which preclude the economies of scale that would be required to compete with the mature LIB industry. In the present state of the industry, niche manufacturing tools and approaches have evolved to support each alternative technology, such that there is substantial replication and duplication in effort. Continuing to pursue a strategy of isolated manufacturing processes/approaches for each LIB-alternative may never allow for at-scale deployment. In order for RFBs to meaningfully compete with LIBs in the realm of LDES, a new disruptive approach based on cross-industry learning and coordination is needed - and this is exactly what our Ad-Mat concept aims to tackle. In this re-envisioned manufacturing landscape, tools and processes from mature industries can be adapted and deployed across the range of alternative energy storage technologies. Adapting tools, equipment, processes, and industrial learning from mature industries to meet the technological requirements of RFBs would open new markets for existing OEMs in adjacent industries, would prevent unnecessary duplication and re-development, would improve efficiency across the manufacturing chain, and would ultimately support reduced costs and accelerated deployment of RFBs at scale.

adaptive manufacturing↗
DOE OSTI2020

Towards renewable flavors, fragrances, and beyond

Esters demand a large space of unique molecules with broad range of applications as flavors, fragrances, pharmaceuticals, cosmetics, green solvents, and advanced biofuels. Global demand of natural esters in food, household cleaner, personal care, and perfume industries is increasing while the ester supply from natural sources has been limited. Development of novel microbial cell factories for ester production from renewable feedstocks can potentially provide an alternative and sustainable source of natural esters and hence help fulfill growing demand. In this work, we highlight recent advances in microbial production of esters and provide perspectives for improving its economic feasibility. As the field matures, microbial ester production platforms will enable renewable and sustainable production of flavors, fragrances, and open new market opportunities beyond what nature can offer.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Knowledge spillovers between PV installers can reduce the cost of installing solar PV

We analyze pricing in PV systems using data from 2008-2014 to identify the effects of knowledge spillovers in reducing the installed cost of PV. This paper estimates the size of the effects of learning by doing and knowledge spillovers using multiple formulations of spillover related variables. We found knowledge spillovers between firms within a county to be a significant and substantial factor in reducing the costs of PV. However, these spillovers reduce costs only for firms over a certain size threshold, and no cost-reducing spillovers were found for smaller installers. Geographic spillovers, within a firm from one county to another were also significant although not as large as the local between-firm effects. We ran 43 specifications on the data and generally found these main results to be robust, although not in every specification. One implication of these results is that policies that subsidize demand for PV are leading to the creation of new knowledge that would not exist at lower levels of demand. Furthermore, that the spillovers become stronger at higher levels of experience suggests that these subsidies would need to be substantial, particularly in new markets with many small firms.

14 SOLAR ENERGY↗
DOE OSTI2023

Machine learning reduces soft costs for residential solar photovoltaics

Further deployment of rooftop solar photovoltaics (PV) hinges on the reduction of soft (non-hardware) costs—now larger and more resistant to reductions than hardware costs. The largest portion of these soft costs is the expenses solar companies incur to acquire new customers. In this study, we demonstrate the value of a shift from significance-based methodologies to prediction-oriented models to better identify PV adopters and reduce soft costs. We employ machine learning to predict PV adopters and non-adopters, and compare its prediction performance with logistic regression, the dominant significance-based method in technology adoption studies. Our results show that machine learning substantially enhances adoption prediction performance: The true positive rate of predicting adopters increased from 66 to 87%, and the true negative rate of predicting non-adopters increased from 75 to 88%. We attribute the enhanced performance to complex variable interactions and nonlinear effects incorporated by machine learning. With more accurate predictions, machine learning is able to reduce customer acquisition costs by 15% ($0.07/Watt) and identify new market opportunities for solar companies to expand and diversify their customer bases. Our research methods and findings provide broader implications for the adoption of similar clean energy technologies and related policy challenges such as market growth and energy inequality.

14 SOLAR ENERGY↗
DOE OSTI2022

Hydro-battery Hybrids – A Case for Holistic Assessment of Hybrid Energy Systems

With increasing penetration of renewable energy resources like solar and wind, the flexibility offered by the hydropower generation facilities would be instrumental in providing grid reliability. However, hydropower’s capabilities are often constrained to meet asset management targets and environmental flow requirements. To meet these necessary requisites while simultaneously being able to utilize hydropower’s full potential, hydro plus battery hybrids offer a logical solution. However it is often challenging to make the case for economic feasibility of hydro-battery hybrids at the required scale of battery storage. To that end, this paper proposes a multi-objective optimization framework to maximize advantages of hydro-battery hybrid systems from three different avenues: new market opportunities, environmental benefits and machine wear and fatigue. Using an illustrative case study of a peaking plant, we simulate hydropower operations for with and without 120 MWh of battery storage for four different simulated flow patterns ranging from peaking operations to run-of-the-river operations and two intermediate flow patterns in between. The results demonstrate that hybridizing the hydropower plant can potentially generate additional revenue while simultaneously enable more environmental friendly operations and reduce the overall machine wear and tear.

Chalishazar, Vishvas H.↗