Search NASA⌕ Search

SEARCH · Search NASA

Results for “nonlinear optical microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Linear and Nonlinear Optical Properties of Metal Nanocomposite Materials

The scientific theme of this award stated in its title is “Linear and Nonlinear Optical Properties of Metal Nanoparticle Composites.” The motivation for the proposal was based on prior work that highlighted unusual third-order nonlinear optical response of metal-nanoparticle composites created by Vanderbilt researchers at the Oak Ridge National Laboratory (ORNL) by implanting metal ions into fused-silica and sapphire substrates and annealing them under appropriate conditions to produce a solid solution comprising noble-metal nanoparticles embedded in an insulating matrix. For example, the well-known localized surface plasmon resonance (LSPR) of gold and silver nanoclusters and nanoparticles was known to yield enhanced effects on the nonlinear absorption and nonlinear refractive index of these materials. The project soon expanded to embrace a wider range of materials and nanostructures, including particularly vanadium dioxide with its insulator-to-metal transition, a wide variety of substrate hosts, and zinc oxide with its multi-faceted band-edge exciton that can be coupled to plasmonic degrees of freedom in silver and aluminum. We employed second- and third-order nonlinear optical spectroscopies and confocal microscopy to quantify the coupling between nanoparticles and adsorbates across interfaces. Because ORNL closed the ion-beam surface-modification facility in 2004, we then developed a nanofabrication technique combining focused ion-beam lithography and pulsed laser deposition to create ordered arrays of metal and oxide nanoparticles in various planar geometries and heterostructures. By 2008, aided by finite-difference time-domain and finite-element calculations, we began to design and fabricate plasmonic “workbenches” on which we could excite quasiparticles (e.g., excitons, phonons, plasmons) using optical signals and electrical impulses, and map the material response down to femtosecond time and nanometer length scales. We developed additional nanofabrication capabilities (e.g., dual-layer electron-beam lithography, quantum-well fabrication and multilayer magnetron sputtering and electron-beam deposition) to create a variety of novel heterostructures as model nanocomposite systems. This led to several new opportunities to study the optical properties of these composites informed by views of potential device configurations. Among the scientific themes that emerged in published papers based on new materials and nanostructures were the following: ultrafast electron dynamics in metamaterials, including ultrafast THz microscopy of the insulator-to-metal transition in VO 2 nanoparticles; plasmon-driven electron injection to promote phase transitions in VO 2 ; and second-harmonic generation in nanostructures without inversion symmetry, in particular, the Archimedean spiral with overall sub-wavelength dimensions. We also explored dimensional and structural effects in plasmonic coupling, including exciton-plasmon coupling in ZnO nanowires; exciton-plasmon coupling in structures incorporating two-dimensional dichalcogenides; and tunable plasmon-induced transparency in plasmonic heterostructures incorporating phase-changing VO 2 . Finally, it should be noted that the work on Archimedean nanospirals and plasmon-exciton coupling led directly into a current quantum-optics research project on photon correlations in diamond nanoparticles, exemplified by the first publication from that effort [Ref. [47] in the bibliography]. A more detailed account setting in the appropriate scientific context all forty-eight papers supported by this award follows.

36 MATERIALS SCIENCE↗

Plant cell wall characterization using scanning probe microscopy techniques

Lignocellulosic biomass is today considered a promising renewable resource for bioenergy production. A combined chemical and biological process is currently under consideration for the conversion of polysaccharides from plant cell wall materials, mainly cellulose and hemicelluloses, to simple sugars that can be fermented to biofuels. Native plant cellulose forms nanometer-scale microfibrils that are embedded in a polymeric network of hemicelluloses, pectins, and lignins; this explains, in part, the recalcitrance of biomass to deconstruction. The chemical and structural characteristics of these plant cell wall constituents remain largely unknown today. Scanning probe microscopy techniques, particularly atomic force microscopy and its application in characterizing plant cell wall structure, are reviewed here. We also further discuss future developments based on scanning probe microscopy techniques that combine linear and nonlinear optical techniques to characterize plant cell wall nanometer-scale structures, specifically apertureless near-field scanning optical microscopy and coherent anti-Stokes Raman scattering microscopy.

09 BIOMASS FUELS↗

Label-free structural imaging of plant roots and microbes using third-harmonic generation microscopy

Root biology is pivotal in addressing global challenges including sustainable agriculture and climate change. However, roots have been relatively understudied among plant organs, partly due to the difficulties in imaging root structures in their natural environment. Here we used microfabricated ecosystems (EcoFABs) to establish growing environments with optical access and employed nonlinear multimodal microscopy of third-harmonic generation (THG) and three-photon fluorescence (3PF) to achieve label-free, in situ imaging of live roots and microbes at high spatiotemporal resolution. THG enabled us to observe key plant root structures including the vasculature, Casparian strips, dividing meristematic cells, and root cap cells, as well as subcellular features including nuclear envelopes, nucleoli, starch granules, and putative stress granules. THG from the cell walls of bacteria and fungi also provides label-free contrast for visualizing these microbes in the root rhizosphere. With simultaneously recorded 3PF signal, we demonstrated our ability to investigate root-microbe interactions by achieving single-bacterium tracking and subcellular imaging of fungal spores and hyphae in the rhizosphere.

Pan, Daisong [University of California, Berkeley, ↗

Nonlinear refraction properties of nickel oxide thin films at 800 nm

Measurements of the nonlinear refractive index, n{sub 2}, of nickel oxide films prepared by controlled oxidation of nickel films deposited on substrates of soda-lime glass are reported. The structure and morphology of the samples were characterized by scanning electron microscopy, atomic force microscopy, and x-ray diffractometry. Samples of excellent optical quality were prepared. The nonlinear measurements were performed using the thermally managed eclipse Z-scan technique at 800 nm. A large value of n{sub 2}approx =10{sup -12} cm{sup 2}/W and negligible nonlinear absorption were obtained.

36 MATERIALS SCIENCE↗

Humidity effects on tip-induced polarization switching in lithium niobate

In the last several decades, ferroelectrics have attracted much attention as perspective materials for nonlinear optics and data storage devices. Scanning probe microscopy (SPM) has emerged as a powerful tool both for studies of domain structures with nanoscale spatial resolution and for writing the isolated nanodomains by local application of the electric field. Quantitative analysis of the observed behavior requires understanding the role of environmental factors on imaging and switching process. Here, we study the influence of the relative humidity in the SPM chamber on tip-induced polarization switching. The observed effects are attributed to existence of a water meniscus between the tip and the sample surface in humid atmosphere. These results are important for a deeper understanding of complex investigations of ferroelectric materials and their applications and suggest the necessity for fundamental studies of electrocapillary phenomena at the tip-surface junction and their interplay with bias-induced materials responses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Precision Plasmonics with Monomers and Dimers of Spherical Gold Nanoparticles: Nonequilibrium Dynamics at the Time and Space Limits

Monomers and dimers of spherical gold nanoparticles (NPs) exhibit highly uniform plasmonic properties at the single-particle level due to their high structural homogeneity (precision plasmonics). Recent investigations in precision plasmonics have largely focused on static properties using conventional techniques such as transmission electron microscopy and optical dark-field microscopy. Here in this Feature Article, we first highlight the application of femtosecond time-resolved electron diffraction for monitoring the nonequilibrium dynamics of spherical gold NPs after ultrafast optical excitation. The analysis of the transient diffraction patterns allows us to directly obtain quantitative information on the incoherent excitation of the lattice, that is, heating upon electron–lattice equilibration, as well as on the development of strain due to lattice expansion on picosecond time scales. The controlled assembly of two spherical gold NPs into a dimer with a few nanometers gap leads to unique optical properties. Specifically, extremely high electric fields (hot spot) in the gap are generated upon resonant optical excitation. Conventional optical microscopy cannot spatially resolve this unique hot spot due to the optical diffraction limit. We therefore employed nonlinear photoemission electron microscopy to visualize hot spots in single dimers of spherical gold NPs. A quantitative comparison of different single dimers confirms the homogeneity of the hot spots on the single-particle level. Finally, overall, these initial results are highly encouraging because they pave the way to investigate nonequilibrium dynamics in highly uniform plasmonic nanostructures at the time and space limits.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SISGR: Atom chip microscopy: A novel probe for strongly correlated materials

Microscopy techniques co-opted from nonlinear optics and high energy physics have complemented solid-state probes in elucidating the order manifest in condensed matter materials. Up until now, however, no attempts have been made to use modern techniques of ultracold atomic physics to directly explore properties of strongly correlated or topologically protected materials. Our current program is focused on introducing a novel magnetic field microscopy technique into the toolbox of imaging probes. Our prior DOE ESPM program funded the development of a novel instrument using a dilute gas Bose-Einstein condensate (BEC) as a scanning probe capable of measuring tiny magnetic (and electric) DC and AC fields above materials. We successfully built the world's first “scanning cryogenic atom chip microscope”, and we now are in the process of characterizing its performance before using the instrument to take the first wide-area images of transport flow within unconventional superconductors, pnictides and oxide interfaces (LAO/STO), topological insulators, and colossal magnetoresistive manganites. We will do so at temperatures outside the capability of scanning SQUIDs, with ~10x better resolution and without 1/f-noise. A notable goal will be to measure the surface-to-bulk conductivity ratio in topological insulators in a relatively model-independent fashion. We have completed the construction of this magnetic microscope. The instrument uses atom chips—substrates supporting micron-sized current-carrying wires that create magnetic microtraps near surfaces for ultracold thermal gases and BECs—to enable single-shot and raster-scanned large-field-of-view detection of magnetic fields. The fields emanating from electronic transport may be detected at the 10 -7 flux quantum (Φ0) level and below; that is, few to sub-micron resolution of sub-nanotesla fields over single-shot, millimeter-long detection lengths. By harnessing the extreme sensitivity of atomic clocks and BECs to external perturbations, we are now in a position to use atom chips for imaging transport in new regimes. Scanning quantum gas atom chip microscopy introduces three very important features to the toolbox of high-resolution scanning microscopy of strongly correlated or topological materials: simultaneous detection of magnetic and electric fields (down to the sub-single electron charge level; no invasive large magnetic fields or gradients; simultaneous micro- and macroscopic spatial resolution; DC to MHz detection bandwidth; freedom from 1/ƒ flicker noise at low frequencies; and, perhaps most importantly, the complete decoupling of probe and sample temperatures. The atom chip microscope can operate at maximum sensitivity and resolution without regard to the substrate temperature. While the BEC is among the coldest objects realizable (100 nK temperatures are typical), the atom chip substrate can be positioned 1 μm away from the BEC and be as hot as 400 K or as cold as the cryostat can cool. This is because unlike superconducting probes, whose temperature is closely coupled to nearby materials, quantum gases are immune to radiative heating. The energy gap between a Rb atom’s ground state and first excited state far exceeds the typical energy of room-temperature blackbody radiation; such atoms are therefore transparent to radiation heating by materials at room temperature or below. We experimentally demonstrated a new atom chip trapping system that allows the placement and high-resolution imaging of ultracold atoms within microns from any ≤100 μm-thin, UHV-compatible material, while also allowing sample exchange with minimal experimental downtime. The sample is not connected to the atom chip, allowing rapid exchange without perturbing the atom chip or laser cooling apparatus. Exchange of the sample and retrapping of atoms has been performed within a week turnaround, limited only by chamber baking. Moreover, the decoupling of sample and atom chip provides the ability to independently tune the sample temperature and its position with respect to the trapped ultracold gas, which itself may remain in the focus of a high-resolution imaging system. We confine 100-nK BECs of 104 87Rb atoms near a gold-mirrored 100-μm-thick silicon substrate. The substrate can be cooled to 35 K without use of a heat shield, while the atom chip, 120-μm away, remains at room temperature. Atoms may be imaged with 1-μm resolution and retrapped every 16 s, allowing rapid data collection. Straightforward improvements will allow us to push sample temperatures close to 4 K, and improve imaging resolution from 1 μm down to a few-100 nm, thereby providing 10 -9 Φ0 detection sensitivity. We will test the utility of this technique by imaging the magnetic fields emanating from electronic transport and domain percolation in several interesting examples of strongly correlated or topologically protected materials. STM, transport, and x-ray scattering experiments have, among others, revealed the existence of a quantum liquid crystal state in iron (pnictide) and cuprate superconductors. This strongly correlated state of matter could also be detected by imaging the fluctuating transport (spatially and in time) of electrons as the phase/regime boundary is crossed between the pnictide non-Fermi liquid (cuprate strange metal) and the pnictide magnetic phase (cuprate pseudogap regime). Our ability to image wide-area inhomogeneous current flow from room-temperature to <10 K will allow us to study the developing domain structure and transport near twin boundary interfaces through the T N ≈50–150 K nematic transition recently identified in bulk transport experiments by Ian Fisher's group in underdoped Fe-arsinide superconductors. Again, this highlights a main feature of our cryogenic atom chip microscope: the ability to image transport regardless of the sample temperature since the BEC, at nK temperatures, is transparent to blackbody radiation, even when held a microns from the surface.

36 MATERIALS SCIENCE↗

Comparing the use of mid-infrared versus far-infrared lasers for mitigating damage growth on fused silica

Laser-induced growth of optical damage can limit component lifetime and, therefore, increase operating costs of large-aperture fusion-class laser systems. While far-infrared (IR) lasers have been used previously to treat laser damage on fused silica optics and render it benign, little is known about the effectiveness of less-absorbing mid-IR lasers for this purpose. In this study, we quantitatively compare the effectiveness and efficiency of mid-IR (4.6 {mu}m) versus far-IR (10.6 {mu}m) lasers in mitigating damage growth on fused silica surfaces. The nonlinear volumetric heating due to mid-IR laser absorption is analyzed by solving the heat equation numerically, taking into account the temperature-dependent absorption coefficient {alpha}(T) at {lambda}=4.6 {mu}m, while far-IR laser heating is well described by a linear analytic approximation to the laser-driven temperature rise. In both cases, the predicted results agree well with surface temperature measurements based on IR radiometry, as well as subsurface fictive temperature measurements based on confocal Raman microscopy. Damage mitigation efficiency is assessed using a figure of merit (FOM) relating the crack healing depth to laser power required, under minimally ablative conditions. Based on our FOM, we show that, for cracks up to at least 500 {mu}m in depth, mitigation with a 4.6 {mu}m mid-IR laser is more efficient than mitigation with a 10.6 {mu}m far-IR laser. This conclusion is corroborated by direct application of each laser system to the mitigation of pulsed laser-induced damage possessing fractures up to 225 {mu}m in depth.

36 MATERIALS SCIENCE↗

Synthesis of Polycrystalline CdSiP{sub 2} in a Gradient Temperature Field

A procedure for the synthesis of a CdSiP{sub 2} compound from the initial elementary components in a gradient thermal field has been developed. The phase and chemical composition of the synthesized and recrystallized material is confirmed by the data of X-ray diffraction analysis and scanning electron microscopy with an energy-dispersive system. The polycrystalline material obtained by the developed method will be used to grow bulk nonlinear optical CdSiP{sub 2} crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication and characterization of electrospun single-crystal lead manganese borate nanofibers

Highlights: • Single crystal PbMnBO4 nanofibers were successfully fabricated by electrospinning process. • The PbMnBO4 nanofibers synthesized for the first time and unprecedented in the literature. • Characterization of PbMnBO{sub 4} nanofibers in mineralogical, optical and thermal properties was revealed. • The nanofibers exhibit single crystalline features with an average size between 120 and 250 nm. • These nanofibers can be used in optic or photonic fields as a flexible sensor due to its nonlinear and ferromagnetic properties. - Abstract: Anhydrous borate compounds are important materials in optical applications as nonlinear optical materials (NLO), due to the presence of structural B{sub x}O{sub y} subunits. Herein, lead manganese borate (PbMnBO{sub 4}) nanofibers have been firstly fabricated via a facile approach using a simple and inexpensive electrospinning technique. All of the synthesized samples were analyzed with X-Ray Diffractometer (XRD), Transmission Electron Microscope (TEM), Scanning Electron Microscope (SEM), Fourier Transform Infrared (FTIR), and Ultraviolet-visible Spectroscopy (UV–vis) method. In addition, they were thermally analyzed with Thermal Gravimetric and Differential Thermal Analyzer and TG-DTA diagrams were discussed in detail. All of the characterization results showed that the obtained PbMnBO{sub 4} nanostructures have nanofiber structures and good crystalline features. PbMnBO{sub 4} nanofiber synthesized for the first time and unprecedented in the literature is promising absorber materials for nonlinear optic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth of dopamine crystals

Many nonlinear optical (NLO) crystals have been identified as potential candidates in optical and electro-optical devices. Use of NLO organic crystals is expected in photonic applications. Hence organic nonlinear optical materials have been intensely investigated due to their potentially high nonlinearities, and rapid response in electro-optic effect compared to inorganic NLO materials. There are many methods to grow organic crystals such as vapor growth method, melt growth method and solution growth method. Out of these methods, solution growth method is useful in providing constraint free crystal. Single crystals of Dopamine have been grown by evaporating the solvents from aqueous solution. Crystals obtained were of the size of orders of mm. The crystal structure of dopamine was determined using XRD technique. Images of crystals were obtained using FEG SEM Quanta Series under high vacuum and low KV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Geometry-guided colloidal interactions and self-tiling of elastic dipoles formed by truncated pyramid particles in liquid crystals

The progress of realizing colloidal structures mimicking natural forms of organization in condensed matter is inherently limited by the availability of suitable colloidal building blocks. To enable new forms of crystalline and quasicrystalline self-organization of colloids, we develop truncated pyramidal particles that form nematic elastic dipoles with long-range electrostaticlike and geometry-guided low-symmetry short-range interactions. Using a combination of nonlinear optical imaging, laser tweezers, and video microscopy, we characterize colloidal pair interactions and demonstrate unusual forms of self-tiling of these particles into crystalline, quasicrystalline, and other arrays. Here, our findings are explained using an electrostatics analogy along with liquid crystal elasticity and symmetry breaking considerations, potentially expanding photonic and electro-optic applications of colloids.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two-Photon Fluorescence Microscope for Microgravity Research

A two-photon fluorescence microscope has been developed for the study of biophysical phenomena. Two-photon microscopy is a novel form of laser-based scanning microscopy that enables three-dimensional imaging without many of the problems inherent in confocal microscopy. Unlike one-photon optical microscopy, two-photon microscopy utilizes the simultaneous nonlinear absorption of two near-infrared photons. However, the efficiency of two-photon absorption is much lower than that of one-photon absorption, so an ultra-fast pulsed laser source is typically employed. On the other hand, the critical energy threshold for two-photon absorption leads to fluorophore excitation that is intrinsically localized to the focal volume. Consequently, two-photon microscopy enables optical sectioning and confocal performance without the need for a signal-limiting pinhole. In addition, there is a reduction (relative to one-photon optical microscopy) in photon-induced damage because of the longer excitation wavelength. This reduction is especially advantageous for in vivo studies. Relative to confocal microscopy, there is also a reduction in background fluorescence, and, because of a reduction in Rayleigh scattering, there is a 4 increase of penetration depth. The prohibitive cost of a commercial two-photon fluorescence-microscope system, as well as a need for modularity, has led to the construction of a custom-built system (see Figure 1). This system includes a coherent mode-locked titanium: sapphire laser emitting 120-fs-duration pulses at a repetition rate of 80 MHz. The pulsed laser has an average output power of 800 mW and a wavelength tuning range of 700 to 980 nm, enabling the excitation of a variety of targeted fluorophores. The output from the laser is attenuated, spatially filtered, and then directed into a confocal scanning head that has been modified to provide for side entry of the laser beam. The laser output coupler has been replaced with a dichroic filter that reflects the longer-wavelength excitation light and passes the shorter-wavelength fluorescence light. Also, the confocal pinhole has been removed to increase the signal strength. The laser beam is scanned by a twoperpendicular- axis pair of galvanometer mirrors through a pupil transfer lens into the side port of an inverted microscope. Finally, the beam is focused by a 63-magnification, 1.3-numerical- aperture oil-immersion objective lens onto a specimen. The pupil transfer lens serves to match the intermediate image planes of the scanning head and the microscope, and its location is critical. In order to maximize the quality of the image, (that is, the point spread function of the objective lens for all scan positions), the entire system was modeled in optical-design software, and the various free design parameters (the parameters of the spatial-filter components as well as the separations of all of the system components) were determined through an iterative optimization process. A modular design was chosen to facilitate access to the optical train for future fluorescence correlation spectroscopy and fluorescence-lifetime experiments.

Fischer, David G.↗

Dynamically tunable second-harmonic generation using hybrid nanostructures incorporating phase-change chalcogenides

Nonlinear metasurfaces with high conversion efficiencies have been vastly investigated. However, strong dynamic tunability of such devices is limited in conventional passive plasmonic and dielectric material platforms. Germanium antimony telluride (GST) is a promising phase-change chalcogenide for the reconfiguration of metamaterials due to strong nonvolatile changes of the real and imaginary parts of the refraction index through amorphous-crystalline phase change. The orderly structured GST has an even higher potential in tunable second-harmonic generation (SHG) with a non-centrosymmetric crystal structure at the crystalline phase, while the amorphous phase of GST does not exhibit bulk second-order nonlinearity. Here, we experimentally demonstrate SHG switches by actively controlling the crystalline phase of GST for a GST-based hybrid metasurface featuring a gap-surface plasmon resonance, and a quarter-wave asymmetric Fabry–Perot (F–P) cavity incorporating GST. We obtain SHG switches with modulation depths as high as ~ 20 dB for the wavelengths at the on-state resonance. We also demonstrate the feasibility of multi-level SHG modulation by leveraging three controlled GST phases, i.e., amorphous, semi-crystalline, and crystalline, for the gap-surface plasmon hybrid device, which features stronger light–matter interaction and has higher resonant SHG efficiencies than the asymmetric F–P cavity device at respective GST phases. This research reveals that GST-based dynamic SHG switches can be potentially employed in practical applications, such as microscopy, optical communication, and photonic computing in the nonlinear regime.

42 ENGINEERING↗

Cancelation of thermally induced frequency shifts in bimaterial cantilevers by nonlinear optomechanical interactions

Bimaterial cantilevers have recently been used in, for example, the calorimetric analysis with picowatt resolution in microscopic space based on state-of-the-art atomic force microscopes. However, thermally induced effects usually change physical properties of the cantilevers, such as the resonance frequency, which reduce the accuracy of the measurements. Here, we propose an approach to circumvent this problem that uses an optical microcavity formed between a metallic layer coated on the back of the cantilever and one coated at the end of an optical fiber irradiating the cantilever. In addition to increasing the sensitivity, the optical rigidity of this system diminishes the thermally induced frequency shift. For a coating thickness of several tens of nanometers, the input power is 5–10 μW. These values can be evaluated from parameters derived by directly irradiating the cantilever in the absence of the microcavity. The system has the potential of using the cantilever both as a thermometer without frequency shifting and as a sensor with nanometer-controlled accuracy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Polymer Composition Influence on Optical Properties of Laser-Generated Au Nanoparticles Based Nanocomposites

Au nanoparticles (AuNPs) stable colloid solution were prepared by laser ablation and fragmentation in liquid monomer isodecyl acrylate (IDA). Sizes of obtained nanoparticles were determined by scanning transmission electron microscopy (STEM) and were about 20 nm. Nanocomposites films were prepared from obtained stable colloid solution by UV-photocuring. To prepare solid polymer films different crosslinking diacrylates were used. Third-order nonlinear optical responses of prepared nanomaterials with different polymer matrix compositions were estimated by z-scan technique and compared.

36 MATERIALS SCIENCE↗

Pd nanoparticles formation by femtosecond laser irradiation and the nonlinear optical properties at 532 nm using nanosecond laser pulses

Pd nanoparticles (NPs) were prepared by focused femtosecond laser irradiation of PdCl{sub 2} dissolved in ethanol. Transmission electron microscopy (TEM) analysis revealed that Pd NPs show certain crystalline microstructure, and the average diameter is 3.4 nm with narrow size distribution from 2.0 to 6.0 nm. The nonlinear optical absorption and refraction of Pd NPs solution were investigated with nanosecond laser pulses at 532 nm. The nonlinear absorption of Pd NPs is saturable at low intensity of 3.28x10{sup 11} W/m{sup 2} but it is changed to reverse saturable with the intensity increased to 7.96x10{sup 11} W/m{sup 2}, which accordingly indicates the nonlinear refraction is changed from self-defocusing to self-focusing. The transition of the nonlinear absorption with the increase in pulse intensity is analyzed by an empirical model which includes mostly saturable absorption (SA) and two-photon absorption (TPA). The intensity of saturable I{sub s} is obtained, along with TPA coefficient {beta}. SA and TPA are both originated from the interband transition between the d band and s-p conduction band. The SA possess less occupied density of states in the ground state and less unoccupied density of states in the excited state than that of TPA, so the TPA dominates the nonlinear absorption when the pulse intensity is high, leading to as-observed transition from SA to TPA. The refraction variation with increase in pulse intensity is attributed to the interband transition of electrons from d band to s-p conduction band in the Pd NPs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Visualizing Surface Plasmons with Photons, Photoelectrons, and Electrons

Both photons and electrons may be used to excite surface plasmon polaritons, the collective charge density fluctuations at the surface of metal nanostructures. By virtue of their nanoscopic and dissipative nature, a detailed characterization of surface plasmon (SP) eigenmodes in real space-time ultimately requires joint sub-nanometer spatial and sub-femtosecond temporal resolution. The latter realization has driven significant developments in the past few years, aimed at interrogating both localized and propagating SP modes over the relevant length and time scales. In this mini-review, we briefly highlight different techniques we employ to visualize the enhanced electric fields associated with SPs. Specifically, we discuss recent hyperspectral optical microscopy, tip-enhanced Raman nano-spectroscopy, nonlinear photoemission electron microscopy, as well as correlated scanning transmission electron microscopy-electron energy loss spectroscopy measurements targeting prototypical plasmonic nanostructures and constructs. Through selected practical examples, we examine the information content in multidimensional images recorded by taking advantage of each of the aforementioned techniques. In effect, we illustrate how SPs can be visualized at the ultimate limits of space and time.

Environmental Molecular Sciences Laboratory↗