Search NASA⌕ Search

SEARCH · Search NASA

Results for “optical films”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Visible-telecom tunable dual-band optical isolator based on dynamic modulation in thin-film lithium niobate

Optical isolators are an essential component of photonic systems. Current integrated optical isolators have limited bandwidths due to stringent phase-matching conditions, resonant structures, or material absorption. Here, we demonstrate a wideband integrated optical isolator in thin-film lithium niobate photonics. We use dynamic standing-wave modulation in a tandem configuration to break Lorentz reciprocity and achieve isolation. We measure an isolation ratio of 15 dB and insertion loss below 0.5 dB for a continuous wave laser input at 1550 nm. In addition, we experimentally show that this isolator can simultaneously operate at visible and telecom wavelengths with comparable performance. Isolation bandwidths up to ∼100 nm can be achieved simultaneously at both visible and telecom wavelengths, limited only by the modulation bandwidth. Our device’s dual-band isolation, high flexibility, and real-time tunability can enable novel non-reciprocal functionality on integrated photonic platforms.

Shah, Manav↗
DOE OSTI2021

Dynamic strain evolution in an optically excited Pt thin film

The structural evolution of a Pt thin film following photo-thermal excitation by 1 ps optical laser pulses was studied with a time resolution of 100 ps over a total time period of 1 ms. Laser pulse fluences below 50 mJ/cm 2 were insufficient to relax the residual stress state of the as-prepared film even after 10 000 pulses. In this fluence regime, a rapid initial lattice expansion and a decrease in the lattice coherence length due to ultrafast photo-thermal heating were observed. The lattice expansion reached a maximum, and the coherence length reached a minimum, 100–200 ps after excitation before monotonically decaying back to their initial values in about 1 µs. Laser pulse fluences greater than 50 mJ/cm 2 produced irreversible stress relaxation within the first 10 optical pulses. In this regime, the lattice expansion was qualitatively similar to that in the low fluence regime, except that the initial structural state was not recovered. The evolution in the coherence length, however, was more complex. Following an initial decrease similar to that observed at low fluence, the coherence length then increased to a broad maximum greater than the initial value, before recovery.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Temporal and spatial tuning of optical constants in praseodymium doped ceria by electrochemical means

Abstract Temporal and spatial tuning of the refractive index of optical thin films is desired for flat optics applications. The redistribution of mobile ions in mixed ionic-electronic conductors (MIEC) has been demonstrated to serve as a viable means for achieving optical tuning down to the nanoscale. Here we studied the dynamic range of the optical tuning achievable in the refractive index, in the MIEC oxide – Pr x Ce 1− x O 2− δ (PCO), for x = 0.1, 0.2 and 0.4, at 500 °C, by in-situ spectrophotometry. Significant increases in the modulation of both the imaginary and real optical constants in the visible and the adjacent spectra were obtained for increased doping levels. Device employing an electrochemical titration method was implemented to modulate the oxygen concentration, and thereby the optical transmission of PCO. Incorporation of a patterned top electrode allowed for the demonstration of spatial control of PCO thin film properties by in-situ video imaging of the optical switching process. The electrochemically induced optical state is shown to remain non-volatile upon quenching the device to room temperature under applied bias.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Spontaneous mesostructure formation produces optically transmissive Ni–P films that are catalytically active for the photoelectrochemical hydrogen evolution reaction

Ni–P films that are catalytically active for the hydrogen-evolution reaction were electrodeposited onto photoactive Si substrates between 20 °C and 80 °C from an aqueous solution. Ni–P films deposited at 20 °C and exposed to acidic environments spontaneously developed deep cracks. A substantial increase in optical transmission to the semiconducting substrate resulted without affecting the catalytic performance of the film. In contrast, Ni–P films deposited at 80 °C only developed minor surface-level cracks and did not exhibit a substantial increase in optical transmission. During electrodeposition of the Ni–P films at low temperatures, the uptake of parasitically evolved hydrogen generated partially defective Ni–P, causing crack formation. Increases in the temperature of the electrodeposition bath increased the faradaic efficiency of Ni–P deposition and consequently reduced the uptake of parasitically generated hydrogen. The defective Ni–P films were converted to a crack-resistant material by thermally desorbing the excess hydrogen that was absorbed during the low-temperature electrodeposition process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Structural, electronic, and optical-absorption properties of 2D Si thin films

Recent experimental studies highlighted the potential of thin-film crystalline silicon (Si) for high-efficiency solar cells. Using density functional theory, we investigated 2D Si thin films across various orientations, thicknesses, and surface structures to elucidate their structure–property relationships. Through surface-energy calculations and Wulff construction, we determined the crystal habit of Si, which aligns with available experimental observations. Electronic-structure calculations underscored the critical role of valence saturation on surfaces in enabling semiconducting behavior in Si thin films, essential for optical applications. From optical-absorption calculations, we identified the surface index exhibiting the highest absorption coefficients for thin films Si solar cell applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Improved fabrication of scalable hybrid silicon nitride–thin-film lithium niobate electro-optic modulators

Strategies for improved fabrication of integrated thin-film lithium niobate electro-optic (EO) Mach–Zehnder modulators (MZMs) are reported using scalable processes and designs. The MZM devices utilize direct bonding of unetched and unpatterned thin-film lithium niobate to patterned and planarized silicon photonic microchips. The latter contains silicon nitride waveguide structures of various widths that are used to form hybrid modes that are suitable for high-bandwidth low-voltage EO modulators based on Pockels effect. We report that the incorporation of appropriately designed outgassing channels and certain modifications to key processing steps helped achieve a greater than 99% reduction in void density during bonding. Void reduction is critically important for these traveling-wave hybrid MZM devices in which the optical mode is controllably distributed between multiple thin layers and propagates over millimeter-scale lengths.

Mere, Viphretuo↗
DOE OSTI2025

Colossal Cryogenic Electro‐Optic Response Through Metastability in Strained BaTiO 3 Thin Films

The search for thin film electro-optic materials that can retain superior performance under cryogenic conditions has become critical for quantum computing. Barium titanate thin films show large linear electro-optic coefficients in the tetragonal phase at room temperature, which is severely degraded down to ≈200 pm V −1 in the rhombohedral phase at cryogenic temperatures. There is immense interest in manipulating these phase transformations and retaining superior electro-optic properties down to liquid helium temperature. Utilizing the thermodynamic theory of optical properties, a large low-temperature electro-optic response is designed by engineering the energetic competition between different ferroelectric phases, leading to a low-symmetry monoclinic phase with a massive electro-optic response. The existence of this phase is demonstrated in a strain-tuned BaTiO 3 thin film that exhibits a linear electro-optic coefficient of 2516 ± 100 pm V −1 at 5 K, which is an order of magnitude higher than the best reported performance thus far. Importantly, the electro-optic coefficient increases by 100 × during cooling, unlike the conventional films, where it degrades. Further, at the lowest temperature, significant higher order electro-optic responses also emerge. These results represent a new framework for designing materials with property enhancements by stabilizing highly tunable metastable phases with strain.

barium titanate↗
DOE OSTI2024

Thin-film lithium niobate electro-optic terahertz wave detector

Here, the design, fabrication, and validation of a thin-film lithium niobate on insulator (LNOI) electro-optic (EO) time-domain terahertz (THz) wave detector is reported. LNOI offers unprecedented properties for the EO detection of freely propagating THz wave radiation pulses and transient electric fields because of the large EO coefficient of the material, engineering of the velocity matching of the THz wave and optical wave, and much reduced detector size. The proof-of-concept device is realized using thin-film lithium niobate optical waveguides forming a Mach–Zehnder interferometer with interferometer arms electrically poled in opposite directions. THz waves are coupled effectively to the fully dielectric device from free space without using antennas or plasmonics. The detection of THz waves with frequencies up to 800 GHz is successfully demonstrated. The detector allows for the detection of THz frequency electric fields up to 4.6 MV/m. The observed frequency response of the device agrees well with theoretical predictions.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Integrated microwave acousto-optic frequency shifter on thin-film lithium niobate

Electrically driven acousto-optic devices that provide beam deflection and optical frequency shifting have broad applications from pulse synthesis to heterodyne detection. Commercially available acousto-optic modulators are based on bulk materials and consume Watts of radio frequency power. Here, we demonstrate an integrated 3-GHz acousto-optic frequency shifter on thin-film lithium niobate, featuring a carrier suppression over 30 dB. Further, we demonstrate a gigahertz-spaced optical frequency comb featuring more than 200 lines over a 0.6-THz optical bandwidth by recirculating the light in an active frequency shifting loop. Our integrated acousto-optic platform leads to the development of on-chip optical routing, isolation, and microwave signal processing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Excitation of Bloch Surface Waves in Zero-Admittance Multilayers for High-Sensitivity Sensor Applications

The growing need for classical as well as quantum optical sensing places increasingly stringent requirements upon the desired characteristics of the engendered fields. Specifically, achieving superior field enhancement plays a critical role in applications ranging from chem-bio sensing, Raman and infrared spectroscopies to ion trapping and qubit control in emerging quantum-information science. Due to their low optical losses and ability to exhibit resonant field enhancements, all dielectric multilayers are emerging as an optical material system not only useful to classical photonics and sensing but also of potential to be integrated with quantum materials and quantum sensing. The recently introduced concept of zero-admittance layers [1] within dielectric multilayer materials, enables the creation and control of resonant fields orders of magnitude larger than the exciting field. Here, invoking the zero-admittance concept, we design, fabricate, and characterize an all-dielectric nonabsorbing stack and demonstrate the engendered huge field enhancement. Describing the fields in terms of Bloch surface waves, we connect the surface field to the semiperiodicity in the dielectric domains of the stack. As a specific application of the resonant field, we propose and demonstrate refractive-index sensing for the detection of trace amounts of an analyte. The results include a quantification of the sensitivity of the device with respect to the profile of the exciting field. The experimental results are shown to be in good agreement with theoretical calculations.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Combinatorial investigation of the Mn–Ge–N chemical system containing ternary nitrides Mn 3 GeN and MnGeN 2

By changing nitrogen chemical potential during synthesis of Mn–Ge–N ternary nitrides, both wurtzite MnGeN 2 and antiperovskite Mn 3 GeN ternary phases are prepared. Antiperovskite films are optically opaque and conductive, while wurtzite films with Mn/(Mn + Ge) ≤ 0.5 transmit light above ~ 2 eV. Alloys of Mn 3 GeN with Si and Al are also investigated. Mn 3 (Ge 1−x Al x )N alloys with 0.07 ≤ x ≤ 0.16 exhibit a cubic (rather than tetragonal) structure. Mn 3 (Ge 1−x Si x )N with x ≤ 0.05 maintains the tetragonal structure but becomes cubic when x > 0.05. This study shows that care must be taken in the synthesis of Mn–Ge–N and similar nitrides, especially when materials are integrated into devices not amenable to structural and chemical probing.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Reversible Oxidation Quantified by Optical Properties in Epitaxial Fe2CrO4+d Films on (001) MgAl2O4

We report on the structural and optical properties of Fe2CrO4+d epitaxial films grown by molecular beam epitaxy on MgAl2O4 (001) as a function of ?. The average Fe valence can be correlated with the out-of-plane lattice parameter and the extent of light absorption in the infrared spectral region. Over-oxidized films (0 < d < 0.5) exhibit reduced lattice parameters and suppressed infrared absorption. We discuss the behavior of a novel infrared transition at ~0.6 eV in stoichiometric Fe2CrO4 films deposited on MgAl2O4 (MAO) at or above 400 °C. This research provides new insight into the atomic structure, optical processes, oxidation states, electronic structure, and application potentials of Fe2CrO4+d.

ellipsometry, Epitaxy, thin film, oxidation, reduc↗
DOE OSTI2024

TiN‐Au/HfO 2 ‐Au Multilayer Thin Films with Tunable Hyperbolic Optical Response

Abstract Hyperbolic metamaterials (HMM) possess significant anisotropic physical properties and tunability and thus find many applications in integrated photonic devices. HMMs consisting of metal and dielectric phases in either multilayer or vertically aligned nanocomposites (VAN) form are demonstrated with different hyperbolic properties. Herein, self‐assembled HfO 2 ‐Au/TiN‐Au multilayer thin films, combining both the multilayer and VAN designs, are demonstrated. Specifically, Au nanopillars embedded in HfO 2 and TiN layers forming the alternative layers of HfO 2 ‐Au VAN and TiN‐Au VAN. The HfO 2 and TiN layer thickness is carefully controlled by varying laser pulses during pulsed laser deposition (PLD). Interestingly, tunable anisotropic physical properties can be achieved by adjusting the bi‐layer thickness and the number of the bi‐layers. Type II optical hyperbolic dispersion can be obtained from high layer thickness structure (e.g., 20 nm), while it can be transformed into Type I optical hyperbolic dispersion by reducing the thickness to a proper value (e.g., 4 nm). This new nanoscale hybrid metamaterial structure with the three‐phase VAN design shows great potential for tailorable optical components in future integrated devices.

Chemistry↗
DOE OSTI2025

Mid-Infrared Photoluminescence from Tellurium Thin Films

Tellurium is an elemental semiconductor with a 0.34 eV optical band gap, showing promise for mid-infrared (MIR) optoelectronics including light-emitting diodes. However, quantitative measurement of the tellurium luminescence efficiency has not yet been investigated, and growing optically active films remain challenging. Here, we demonstrate the low-temperature growth of bright tellurium thin films by using physical vapor transport. The sample morphology is controlled by varying the growth temperature, yielding continuous thin films, microparticles, or nanowires. Additionally, we demonstrated patterned growth by using a seed layer for selective nucleation. Quantitative photoluminescence measurements at room temperature reveal an internal quantum yield of 2.0% at 0.34 eV for the as-grown tellurium films, comparable to the best-reported efficiencies of III-V and II-VI compound semiconductors with similar band gaps. Furthermore, we demonstrate band-gap tunability with Te-Se alloys, where up to 20% selenium incorporation gradually blue-shifts the band gap to 0.55 eV. The work demonstrates the potential use of tellurium for efficient MIR devices.

Wang, Shu↗
DOE OSTI2023

Buried-Electrode Hybrid Bonded Thin-Film Lithium Niobate Electro-Optic Mach-Zehnder Modulators

Hybrid bonded silicon nitride thin-film lithium niobate (TFLN) Mach-Zehnder modulators (MZMs) at 1310 nm were designed with metal coplanar waveguide electrodes buried in the silicon-on-insulator (SOI) chip. Here, the MZM devices showed greatly improved performance compared to earlier devices of a similar design, and similar performance to comparable MZM devices with gold electrodes made on top of the TFLN layer. Both devices achieve a 3-dB electro-optic bandwidth greater than 110 GHz and voltage-driven optical extinction ratios greater than 28 dB. Half-wave voltage-length products (VπL) of 2.8 and 2.5 V∙ cm were measured for the 0.5 and 0.4 cm long buried metal and top gold electrode MZMs, respectively.

42 ENGINEERING↗
DOE OSTI2024

Unique optical excitations in topological insulators (Final Technical Report)

The overall objective of this research is to understand how light interacts with topological insulator (TI) films and layered structures. Unlike normal materials, the electrons in TI films are trapped at the top and bottom surfaces of the film. These electrons have unusual properties, including low mass and high velocity. Light shining on these trapped electrons will excite electron density waves, called plasmons, which inherit the unusual properties of the electrons. This project aims to understand how these plasmons interact with each other and how the plasmon properties change as the film dimensions change. By controlling the physical properties of the films, the optical response of the film can also be controlled. In addition to single TI films, the project will also investigate the properties of stacks of TI films layered with normal insulating films. Stacking these materials results in multiple layers of trapped electrons whose plasmons can interact in ever more complex ways. After these interactions are understood, we can begin to engineer complex TI structures to obtain designer optical phenomena in the far-infrared and THz, wavelength ranges of interest for environmental monitoring and chemical sensing. This research directly addresses DOE Grand Challenges, including understanding how properties of matter emerge from complex electronic correlations and learning how to control these properties as well as the mission of the Basic Energy Sciences program to understand and control matter at the electronic/atomic level.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Core-shell metallic alloy nanopillars-in-dielectric hybrid metamaterials with magneto-plasmonic coupling

Combining plasmonic and magnetic properties, namely magneto-plasmonic coupling, inspires great research interest and the search for magneto-plasmonic nanostructure becomes considerably critical. In this work, we designed a nanopillar-in-matrix structure with core–shell alloyed nanopillars for both BaTiO 3 (BTO)-Au 0.5 Co 0.5 (AuCo) and BTO-Au 0.25 Cu 0.25 Co 0.25 Ni 0.25 (AuCuCoNi) hybrid systems, i.e., ferromagnetic alloy cores (e.g., Co or CoNi) with plasmonic shells (e.g., Au or Au/Cu). These core–shell alloy nanopillars are uniformly embedded into a dielectric BTO matrix to form a vertically aligned nanocomposite (VAN) structure. Both hybrid systems present excellent epitaxial quality and interesting multi-functionality, e.g., high magnetic anisotropy, magneto-optical coupling response, tailorable plasmonic resonance wavelength, tunable hyperbolic properties and strong optical anisotropy. These alloyed nanopillars-in-matrix designs provide enormous potential for complex hybrid material designs with multi-functionality and demonstrate strong interface enabled magneto-plasmonic coupling along with plasmonic and magnetic performance.

36 MATERIALS SCIENCE↗