Search NASA⌕ Search

SEARCH · Search NASA

Results for “orthogonal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Orthogonal canonical forms for second-order systems

The authors prove that a linear second-order system with arbitrary damping cannot be reduced to Hessenberg-triangular form by means of orthogonal transformations, while this reduction is always possible for the modal damping commonly assumed for models of flexible structures. The type of canonical form obtainable by means of orthogonal transformations acting on a second-order system is heavily dependent on the type of damping considered. If the damping matrix is merely positive semi-definite symmetric, it is generally not possible to obtain a reduction to Hessenberg-triangular form, while this reduction is trivial for zero or Rayleigh damping. If damping is modal, however, as is commonly assumed in structural models, the reduction exists and is nontrivial. Furthermore, reduction to triangular second-order Schur form is always possible for such damping: this canonical form appears likely to have applications to second-order system theory.

Williams, Trevor↗
NASA NTRS1990

Orthogonal subspaces for correlation masking

A digital correlation mask that induces orthogonality among a prescribed set of reference imagery is described. In this particular implementation, the resulting correlation is undersampled and shift-variant, though if it is applied to optical correlators, those limitations are removed. A method of introducing orthogonality among the weights among the training set from which filter values are obtained is derived, so that the correlation value from a given filter is representative of the unique nature of the reference object as compared against the other objects in the training class.

Juday, Richard D.↗
NASA NTRS1991

Proper orthogonal decomposition based turbulence modeling

The proper orthogonal decomposition is utilized to provide one mode estimates of various turbulence quantities in the near-wall region of the turbulent boundary layer. The experimental data of Herzog (1986) and the direct numerical simulation (DNS) results of Zang (1991) proved the two-point correlation tensor. The correlation tensor is then used as the kernel in the integral eigenvalue problem from which the proper orthogonal modes are obtained. The one mode estimates of the turbulent kinetic energy, dissipation, and triple moments all exhibit the proper asymtotic behavior near the wall. As a validation test, a model for the triple moments is developed and its near-wall behavior is studied. This information can then be used to obtain an estimate of the damping function near the wall, which is then compared to known existing behavior. Since this is an initial investigation, the streamwise and spanwise dependence is surpressed and only the wall normal direction (y+) behavior of various turbulence statistics near the wall is studied. Before examining one mode estimates of the triple moments and the dissipation (on which the model is based), various second order moments are examined. If these do not exhibit the proper behavior near the wall (as discussed by Speziale et al 1990) it does not seem reasonable to expect the one mode estimate of the triple moment and dissipation to have the right behavior. Only the results obtained using the experimental data of Herzog are discussed since the results from the simulations of Zang exhibit similar behavior as discussed above.

Glauser, Mark N.↗
NASA NTRS1993

Non-orthogonal subband/transform coder

The present invention is directed to a simplified digital subband coder/decoder. In the present invention a signal is fed into a coder. The coder uses a non-orthogonal algorithm that is simply implemented in the coder hardware. The simple non-orthogonal design is then used in the implementation of the decoder to decode the signal.

Glover, Daniel R.↗
NASA NTRS2000

Polar Plate Theory for Orthogonal Anisotropy

Laminated fiber-reinforced (or filamentary) composites are used today for their high strength-to-weight and stiffness-to-weight ratios. However, because of the anisotropic behavior of composites, determining the response on a macroscopic scale is challenging. This is particularly evident in the evaluation of the governing differential equations of a circular disk with the fibers of the lamina oriented with rectilinear orthogonality. This includes any situation involving a composite plate of circular geometry in which out-of-plane displacements due to load are desired, such as fastener pull through loading of a composite plate. Current analysis techniques use numerical methods with rectilinear coordinate systems to solve problems with circular geometry. These analyses over predict plate stiffness by 20% and underpredict failure by 70%. Consequently, there is a need to transform classical composite plate theory to a polar coordinate system. In order to better analyze structures with circular geometries the classical composite plate equations are transformed into the plate equations for a rectilinearly anisotropic composite in polar coordinates. A composite plate is typically a laminate of fibers in rectilinear directions. Subsequent to the lay-tip the necessary geometry is cut out of a rectangular plate. In a similar manner, the derivation of the plate equation starts with the fundamental definitions of strain, displacement and curvature and incorporates the material property angular dependence into the equilibrium equations for a differential polar element. In the transformed state, the stiffness coefficients are no longer constant, adding to the complexity of the governing differential equations. This paper discusses the new derivation and evaluation of the plate equations for a circular composite disk with orthogonal rectilinear anisotropy. The resultant new three partial differential equations, which describe the circular anisotropic plate, can be used to evaluate out-of-plane displacements for given load conditions in design of composite Structures. Without the formation of these unique plate equations, design of such structures is not a precise engineering accomplishment due to the lack of precise design tools. Such structures are over designed to compensate and costly tests need to be performed after production to validate safety. Though impossible to present the mathematical solution within the limits of this paper, the application of the newly derived plate equation in its orthotropic form for a balanced symmetric laminate compared favorably with test results and surpassed the results of standard numerical methods. Within the limitations of the problem foundation the predictive model provides a mechanism for establishing out-of-plane deflection levels for a circular composite plate. Future work in this area should include incorporating the circular composite plate equations in Finite Element Models. The new anisotropic polar plate equations call be utilized as a design tool so that the design more accurately meets the requirements, thus taking full advantage of the weight savings of composites. These accomplishments have not previously been presented to the engineering community nor ever proposed to the IAF. Should the proposed paper be accepted for presentation, attendance is assured.

Bailey, Michelle D.↗
NASA NTRS2000

CVS Decomposition of 3D Homogeneous Turbulence Using Orthogonal Wavelets

This paper compares the filtering used in Coherent Vortex Simulation (CVS) decomposition with an orthogonal wavelet basis, with the Proper Orthogonal Decomposition (POD) or Fourier filtering. Both methods are applied to a field of Direct Numerical Simulation (DNS) data of 3D forced homogeneous isotropic turbulence at microscale Reynolds number R(sub lambda) = 168. We show that, with only 3%N retained modes, CVS filtering separates the coherent vortex tubes from the incoherent background flow. The latter is structureless, has an equipartition energy spectrum, and has a Gaussian velocity probability distribution function (PDF) and an exponential vorticity PDF. On the other hand, the Fourier basis does not extract the coherent vortex tubes cleanly and leaves organized structures in the residual high wavenumber modes whose PDFs are stretched exponentials for both the velocity and the vorticity.

Farge, Marie↗
NASA NTRS2003

Comparison of Matrix Cracking in Melt-Infiltrated SiC/SiC Composites with 3D and 2D-Woven Orthogonal Architectures

Acoustic emission techniques combined with microstructural observations were used to determine the dependence of through thickness matrix cracking (TTMC) on in-plane tensile stress for melt infiltrated Sylramic fiber-based SIC/SiC composite panels with various 3D-woven orthogonal fiber architectures. Results were compared with prior TTMC results from similar panels with 2D woven orthogonal architectures.Both data sets were analysed on the basis that the source for TTMC originated in the 90 degree or Z-fiber tows.

Morscher, Gregory N.↗
NASA NTRS2003

Matrix Cracking in 3D Orthogonal Melt-Infiltrated SiC/SiC Composites with Various Z-Fiber Types

The occurrence of matrix cracks in melt-infiltrated SiC/SiC composites with a 3D orthogonal architecture was determined at room temperature for specimens tested in tension oriented in the X-direction (parallel to Z-bundle weave direction) and Y-direction (perpendicular to Z-bundle weave direction) and Y-direction (perpendicular to Z-bundle weave direction). The fiber-types were Sylramic and Sylramic-IBN in the X and Y-directions and lower modulus ZMI, T300, and rayon in the Z-direction. Acoustic emission (AE) was used to monitor the matrix cracking activity. For Y-direction composites, the AE data was used to determine the exact (+/- 0.25 mm) location where matrix cracks occurred in the 3D orthogonal architecture. This enabled the determination of the stress-dependent matrix crack distributions for small but repeatable matrix rich 'unidirectional' and the matrix poor 'cross-ply' regions within the architecture. It was found that matrix cracking initiated at very low stresses (approx. 40 MPa) in the 'unidirectional' regions for the largest z-direction fiber tow composites. Decreasing the size of the z-fiber bundle, increased the stress for matrix cracking in the 'unidirectional' regions. Matrix cracking in the 'cross-ply' regions always occurred at higher stresses than in 'unidirectional' regions, and the stress-dependent matrix crack distribution of the 'cross-ply' regions was always over a wider stress-range than the 'unidirectional' regions. For composites tested in the X-direction, a lower elastic modulus and a narrower and lower stress-range for matrix cracking were observed compared to composites tested in the Y-direction.

Morscher, Gregory N.↗
NASA NTRS2004

Accurate Calculation of Oscillator Strengths for CI II Lines Using Non-orthogonal Wavefunctions

Non-orthogonal orbitals technique in the multiconfiguration Hartree-Fock approach is used to calculate oscillator strengths and transition probabilities for allowed and intercombination lines in Cl II. The relativistic corrections are included through the Breit-Pauli Hamiltonian. The Cl II wave functions show strong term dependence. The non-orthogonal orbitals are used to describe the term dependence of radial functions. Large sets of spectroscopic and correlation functions are chosen to describe adequately strong interactions in the 3s(sup 2)3p(sup 3)nl (sup 3)Po, (sup 1)Po and (sup 3)Do Rydberg series and to properly account for the important correlation and relaxation effects. The length and velocity forms of oscillator strength show good agreement for most transitions. The calculated radiative lifetime for the 3s3p(sup 5) (sup 3)Po state is in good agreement with experiment.

Tayal, S. S.↗
NASA NTRS2011

Least-Squares Adaptive Control Using Chebyshev Orthogonal Polynomials

This paper presents a new adaptive control approach using Chebyshev orthogonal polynomials as basis functions in a least-squares functional approximation. The use of orthogonal basis functions improves the function approximation significantly and enables better convergence of parameter estimates. Flight control simulations demonstrate the effectiveness of the proposed adaptive control approach.

Nguyen, Nhan T.↗
NASA NTRS2017

JIGSAW-GEO (1.0): Locally Orthogonal Staggered Unstructured Grid Generation for General Circulation Modelling on the Sphere

An algorithm for the generation of non-uniform, locally orthogonal staggered unstructured spheroidal grids is described. This technique is designed to generate very high-quality staggered VoronoiDelaunay meshes appropriate for general circulation modelling on the sphere, including applications to atmospheric simulation, ocean-modelling and numerical weather prediction. Using a recently developed Frontal-Delaunay refinement technique, a method for the construction of high-quality unstructured spheroidal Delaunay triangulations is introduced. A locally orthogonal polygonal grid, derived from the associated Voronoi diagram, is computed as the staggered dual. It is shown that use of the Frontal-Delaunay refinement technique allows for the generation of very high-quality unstructured triangulations, satisfying a priori bounds on element size and shape. Grid quality is further improved through the application of hill-climbing-type optimisation techniques. Overall, the algorithm is shown to produce grids with very high element quality and smooth grading characteristics, while imposing relatively low computational expense. A selection of uniform and non-uniform spheroidal grids appropriate for high-resolution, multi-scale general circulation modelling are presented. These grids are shown to satisfy the geometric constraints associated with contemporary unstructured C-grid-type finite-volume models, including the Model for Prediction Across Scales (MPAS-O). The use of user-defined mesh-spacing functions to generate smoothly graded, non-uniform grids for multi-resolution-type studies is discussed in detail.

geophysical fluid dynamics↗
NASA NTRS2019

Meshless Local Petrov-Galerkin (MLPG) Method with Orthogonal Polynomials for Euler-Bernoulli Beam Problems

In this paper, the feasibility of orthogonal polynomials in the meshless local Petrov Galerkin method (MLPG) method is studied. The orthogonal polynomials, Chebyshev and Legendre polynomials, are used in this MLPG method as trial functions. The test functions used were power functions with smooth derivatives at their ends. The performance of these methods is studied by applying these methods to Euler-Bernoulli beam problems. The MLPG-Galerkin and Legendre methods passed all the patch tests for simple beam problems. Next the formulations are tested on complex beam problems such as beams with partial loadings and continuous beam problems. Problems with load discontinuities and additional supports require special attention. Near discontinuities, judicious choice of number of nodes and nodal placements are needed to obtain accurate deflections, slopes, moments and shear forces. As polynomial functions are used, the large number of nodes can create a transformation matrix that is ill-conditioned, resulting in problems with the inversion of the matrix. The conditioning worsens as the number of nodes are increased beyond 20. Quadruple precision was needed for models to obtain accurate solutions. Even with quadruple precision the accuracy of the method suffers as the number of nodes is increased beyond 20. This appears to be a drawback of the MLPG-Chebyshev and MLPG-Legendre methods.

Raju, Ivatury S.↗
NASA NTRSDate not supplied

Stability Analysis of the Flow over a Swept Forward-Facing Step using PIV Base Flowsin a Non-Orthogonal Coordinate System

Understanding the flow of a crossflow-vortex-dominated boundary layer over a forward-facing step excrescence is necessary in order to mitigate an early transition scenario on the wings and tail of commercial aircraft. By performing BiGlobal stability analysis on the flowfield measured with high-resolution, stereographic Particle Image Velocimetry (PIV), previous work has shown that a family of unstable disturbances exists in the direct downstream vicinity of a supercritical, forward-facing step. The goal of the present paper is to improve the previously used stability approach on two fronts: 1) the stability problem is formulated in a non-orthogonal coordinate system and 2) the contribution of the out-of-plane base-flow derivatives is accounted for locally. The resulting eigen solutions feature significantly stronger growth rates and eigenfunctions that are localized above regions of reverse flow. The changes in the problem formulation furthermore establish a significant improvement in the comparison of the stability solutions with the results from the Spectral Proper Orthogonal Decomposition (SPOD) of a time-resolved measurement of the perturbation content. A large destabilizing effect by the out-of-plane base-flow derivatives is determined to be justified, despite the assumption that these derivatives are small, because the effect can be reconstructed upon using an eigenvalue-correction formula that assumes the responsible terms are infinitesimally small. The unstable perturbation mechanisms are demonstrated to have a convective nature by assessing the relation between the frequency and the out-of-plane wavenumber, which indicates that their group speed does not approach zero. The last 2 facts, that 1) the perturbations are convective and 2) that the out-of-plane base-flow-derivative terms are small, remove any qualitative suspicions that the perturbation problem is not conducive to parabolization. This opens the path to analyzing this problem with a plane-marching approach.

Boundary- Layer Transition↗