Modeling charged defects and defect levels in semiconductors and oxides with density functional theory ? an improved inside-out perspective.
Abstract not provided.
Schultz, Peter A.↗
SEARCH · Search NASA
Results for “oxide semiconductor”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Experimental and theoretical study of hole scattering in RF sputtered p-type Cu 2 O thin films
One of the key materials of interest for p-type oxide semiconductor thin film electronics is cuprous oxide (Cu 2 O), due to its relatively high hole mobility. Here, in this work, we use experiments, analytical models, and density functional theory calculations to study the scattering mechanisms that determine Hall mobility in two Cu 2 O samples. First, we examine a polycrystalline Cu 2 O thin film deposited by RF magnetron sputtering, and second, a single-crystalline Cu2O bulk substrate. Temperature-dependent Hall measurements indicate that neutral impurity and grain boundary scattering are dominant for the polycrystalline Cu 2 O thin film, while phonon scattering is dominant for single-crystalline Cu 2 O. Our first-principles calculations show that the room-temperature intrinsic hole mobility of Cu 2 O is 106 cm 2 V –1 s –1 , indicating the great promise of the material for p-type electronic devices. This intrinsic mobility is limited by phonon scattering, with the most dominant scattering modes having phonon energies of 88.4 and 17.1 meV. These results indicate that the key pathways to increase the hole mobility in Cu 2 O thin films are by reducing the impurity concentration and by increasing grain size. Our work thus sets the stage for the future development of high performance Cu 2 O-based p-type thin film transistors.
36 MATERIALS SCIENCE↗
Drivers for paralleled semiconductor switches
An apparatus includes a plurality of parallel-connected semiconductor switches (e.g., silicon carbide (SiC) metal oxide semiconductor field effect transistors (MOSFETs) or other wide-bandgap semiconductor switches) and a plurality of driver circuits having outputs configured to be coupled to control terminals of respective ones of the plurality of semiconductor switches and configured to drive the parallel-connected semiconductor switches responsive to a common switch state control signal. The driver circuits may have respective different power supplies, which may be adjustable. Respective output resistors may couple respective ones of the driver circuits to respective ones of the semiconductor switches. The output resistors may be adjustable.
Nojima, Geraldo↗
Engineering local strain for single-atom nuclear acoustic resonance in silicon
Mechanical strain plays a key role in the physics and operation of nanoscale semiconductor systems, including quantum dots and single-dopant devices. In this report we describe the design of a nanoelectronic device, where a single nuclear spin is coherently controlled via nuclear acoustic resonance (NAR) through the local application of dynamical strain. The strain drives spin transitions by modulating the nuclear quadrupole interaction. We adopt an AlN piezoelectric actuator compatible with standard silicon metal–oxide–semiconductor processing and optimize the device layout to maximize the NAR drive. We predict NAR Rabi frequencies of order 200 Hz for a single 123Sb nucleus in a wide region of the device. Spin transitions driven directly by electric fields are suppressed in the center of the device, allowing the observation of pure NAR. Using electric field gradient-elastic tensors calculated by the density-functional theory, we extend our predictions to other high-spin group-V donors in silicon and to the isoelectronic 73Ge atom.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
2D materials-assisted heterogeneous integration of semiconductor membranes toward functional devices
Heterogeneous integration techniques allow the coupling of highly lattice-mismatched solid-state membranes, including semiconductors, oxides, and two-dimensional materials, to synergistically fuse the functionalities. The formation of heterostructures generally requires two processes: the combination of crystalline growth and a non-destructive lift-off/transfer process enables the formation of high-quality heterostructures. Although direct atomic interaction between the substrate and the target membrane ensures high-quality growth, the strong atomic bonds at the substrate/epitaxial film interface hinder the non-destructive separation of the target membrane from the substrate. Alternatively, a 2D material-coated compound semiconductor substrate can transfer the weakened (but still effective) surface potential field of the surface through the 2D material, allowing both high-quality epitaxial growth and non-destructive lift-off of the grown film. This Perspective reviews 2D/3D heterogeneous integration techniques, along with applications of III–V compound semiconductors and oxides. Here, the advanced heterogeneous integration methods offer an effective method to produce various freestanding membranes for stackable heterostructures with unique functionalities that can be applied to novel electrical, optoelectronic, neuromorphic, and bioelectronic systems.
2D materials↗
Experimental and theoretical evidence for hydrogen doping in polymer solution-processed indium gallium oxide
The field-effect electron mobility of aqueous solution-processed indium gallium oxide (IGO) thin-film transistors (TFTs) is significantly enhanced by polyvinyl alcohol (PVA) addition to the precursor solution, a >70-fold increase to 7.9 cm 2 /Vs. To understand the origin of this remarkable phenomenon, microstructure, electronic structure, and charge transport of IGO:PVA film are investigated by a battery of experimental and theoretical techniques, including In K-edge and Ga K-edge extended X-ray absorption fine structure (EXAFS); resonant soft X-ray scattering (R-SoXS); ultraviolet photoelectron spectroscopy (UPS); Fourier transform-infrared (FT-IR) spectroscopy; time-of-flight secondary-ion mass spectrometry (ToF-SIMS); composition-/processing-dependent TFT properties; high-resolution solid-state 1 H, 71 Ga, and 115 In NMR spectroscopy; and discrete Fourier transform (DFT) analysis with ab initio molecular dynamics (MD) liquid-quench simulations. The 71 Ga{ 1 H} rotational-echo double-resonance (REDOR) NMR and other data indicate that PVA achieves optimal H doping with a Ga···H distance of ~3.4 Å and conversion from six- to four-coordinate Ga, which together suppress deep trap defect localization. This reduces metal-oxide polyhedral distortion, thereby increasing the electron mobility. Finally, hydroxyl polymer doping thus offers a pathway for efficient H doping in green solvent-processed metal oxide films and the promise of high-performance, ultra-stable metal oxide semiconductor electronics with simple binary compositions.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Characterization of Shallow, Undoped Ge/SiGe Quantum Wells Commercially Grown on 8-in. (100) Si Wafers
Hole spins in Ge quantum wells have shown success in both spintronic and quantum applications, thereby increasing the demand for high-quality material. We performed material analysis and device characterization of commercially grown shallow and undoped Ge/SiGe quantum well heterostructures on 8-in. (100) Si wafers. Material analysis reveals the high crystalline quality, sharp interfaces, and uniformity of the material. We demonstrate a high mobility (1.7 × 10 5 cm 2 V –1 s –1 ) 2D hole gas in a device with a conduction threshold density of 9.2 × 10 10 cm –2 . We study the use of surface preparation as a tool to control barrier thickness, density, mobility, and interface trap density. We report interface trap densities of 6 × 10 12 eV –1 . Our results validate the material’s high quality and show that further investigation into improving device performance is needed. We conclude that surface preparations which include weak Ge etchants, such as dilute H 2 O 2 , can be used for postgrowth control of quantum well depth in Ge-rich SiGe while still providing a relatively smooth oxide–semiconductor interface. Our results show that interface state density is mostly independent of our surface preparations, thereby implying that a Si cap layer is not necessary for device performance. Transport in our devices is instead limited by the quantum well depth. Commercially sourced Ge/SiGe, such as studied here, will provide accessibility for future investigations.
36 MATERIALS SCIENCE↗
Amorphous Indium Oxide Channel FEFETs With Write Voltage of 0.9 V and Endurance >10 12 for Refresh-Free Embedded Memory
This work presents, for the first time, a back-end-of-the-line (BEOL)-compatible W-doped indium oxide (IWO) ferroelectric field-effect transistor (FEFET) with a record-low operating voltage below 0.9 V and a write speed of 20 ns while achieving a transient read current window (CW) ratio ( I LVT /I HVT ) greater than 10 4 . The device also exhibits exceptional reliability characteristics such as: 1) measured bipolar write endurance up to 10 12 cycles; 2) a fast read speed of 50 ns; 3) read endurance surpassing 10 12 cycles; and 4) retention exceeding 10 4 s at 85 ∘ C. Furthermore, a physics-based numerical model has been developed to investigate the nanoscale characteristics of BEOL FEFET devices, leveraging nucleation-limited switching in HfO 2 ferroelectrics and dc characterization to extract material and channel parameters for accurate device simulation. The simulation uncovers the stochastic switching behavior of BEOL amorphous oxide semiconductor (AOS) FEFETs and demonstrates an intrinsic switching time as low as 1 ps, highlighting the potential of BEOL AOS FEFETs for ultrafast memory applications. These results establish AOS FEFETs as a compelling candidate for high-density embedded memory applications for last-level cache (LLC) (L4) in advanced CMOS technology nodes.
1-V ferroelectric field-effect transistor (FEFET)↗
Tracking oxygen vacancy migration in memristor devices using operando hard X-ray photoelectron spectroscopy
Fabrication of ultrathin (sub-2 nm) oxide semiconductor memristors poses the fundamental challenge of achieving oxide growth with atomic precision in terms of electronic structure and defect formation. Recently, ultrathin memristors consisting of bilayers of mixed Al 2 O 3 and MgO atomic layers were fabricated using an in vacuo atomic layer deposition process. This approach offers a unique platform for precise atomic control of oxygen vacancies in the device in which the vacancies are introduced by placing MgO atomic layers between pristine Al 2 O 3 layers. In this work, we present a systematic operando Hard X-ray PhotoElectron Spectroscopy (HAXPES) study of the switching of such memristors, combined with complementary current-voltage and capacitance-voltage (C-V) measurements. We used a memristor stack of Al 2 O 3 /MgO atomic layers, with the MgO-containing oxide deposited on the bottom Al metal electrode and a pure Al 2 O 3 layer below the top Pd electrode. HAXPES analysis shows a substantial change in the chemical shift of the Aluminum oxide when switching between the ”OFF” and ”ON” states indicative of a redistribution of oxygen vacancies in the device active layer. Interestingly, subsequent switching to the OFF state shows hysteretic behavior indicating the retention of some oxygen vacancies in the top Al 2 O 3 layer. This vacancy retention can be correlated with the stochastic behavior of the switching voltage observed in these devices. C–V measurements show a clear frequency-dependent response in the OFF state, consistent with enhanced polarization and vacancy trapping at low frequencies.
47 OTHER INSTRUMENTATION↗
Graphite-Embedded High-Performance Insulated Metal Substrate for Wide-Bandgap Power Modules
Emerging wide-bandgap (WBG) semiconductor devices such as silicon carbide (SiC) metal–oxide semiconductor field-effect transistors (MOSFETs) and gallium nitride high-electron-mobility transistors can handle high power in reduced semiconductor areas better than conventional Si-based devices owing to superior material properties. With increased power loss density in a WBG-based converter and reduced die size in power modules, thermal management of power devices must be optimized for high performance. Here, we present a graphite-embedded insulated metal substrate (thermally-annealed-pyrolytic-graphite-embedded insulated metal substrate—IMSwTPG) designed for WBG power modules. Theoretical thermal performance analysis of graphite-embedded metal cores is presented, with design details for IMSwTPG with embedded graphite to replace a direct-bonded copper (DBC) substrate. The proposed IMSwTPG is compared with an aluminum nitride-based DBC substrate using finite-element thermal analysis for steady-state and transient thermal performance. The solutions’ thermal performances are compared under different coolant temperature and thermal loading conditions, and the proposed substrate's electrical performance is validated with static and dynamic characterization. Using graphite-embedded substrates, junction-to-case thermal resistance of SiC MOSFETs can be reduced up to 17%, and device current density can be increased by 10%, regardless of the thermal management strategy used to cool the substrate. Reduced transient thermal impedance of up to 40% of dies owing to increased heat capacity is validated in transient thermal simulations and experiments. The half-bridge power module's electrical performance is evaluated for on -state resistance, switching performance, and switching loss at three junction temperature conditions. The proposed substrate solution has minimal impact on conduction and switching performance of SiC MOSFETs.
42 ENGINEERING↗
Epitaxial Growth of Large-Scale 2D CrTe 2 Films on Amorphous Silicon Wafers With Low Thermal Budget
2D van der Waals (vdW) magnets open landmark horizons in the development of innovative spintronic device architectures. However, their fabrication with large scale poses challenges due to high synthesis temperatures (>500 °C) and difficulties in integrating them with standard complementary metal-oxide semiconductor (CMOS) technology on amorphous substrates such as silicon oxide (SiO 2 ) and silicon nitride (SiN x ). Here, a seeded growth technique for crystallizing CrTe 2 films on amorphous SiN x /Si and SiO 2 /Si substrates with a low thermal budget is presented. This fabrication process optimizes large-scale, granular atomic layers on amorphous substrates, yielding a substantial coercivity of 11.5 kilo-oersted, attributed to weak intergranular exchange coupling. Field-driven Néel-type stripe domain dynamics explain the amplified coercivity. Moreover, the granular CrTe 2 devices on Si wafers display significantly enhanced magnetoresistance, more than doubling that of single-crystalline counterparts. Current-assisted magnetization switching, enabled by a substantial spin–orbit torque with a large spin Hall angle (85) and spin Hall conductivity (1.02 × 10 7 ℏ/2e Ω -1 m -1 ), is also demonstrated. These observations underscore the proficiency in manipulating crystallinity within integrated 2D magnetic films on Si wafers, paving the way for large-scale batch manufacturing of practical magnetoelectronic and spintronic devices, heralding a new era of technological innovation.
2D magnetic thin films↗
Coexistence and Interplay of Two Ferroelectric Mechanisms in Zn 1-x Mg x O
Ferroelectric materials promise exceptional attributes including low power dissipation, fast operational speeds, enhanced endurance, and superior retention to revolutionize information technology. However, the practical application of ferroelectric-semiconductor memory devices has been significantly challenged by the incompatibility of traditional perovskite oxide ferroelectrics with metal-oxide-semiconductor technology. Recent discoveries of ferroelectricity in binary oxides such as Zn 1-x Mg x O and Hf 1-x Zr x O have been a focal point of research in ferroelectric information technology. Here, this work investigates the ferroelectric properties of Zn 1-x Mg x O utilizing automated band excitation piezoresponse force microscopy. This findings reveal the coexistence of two ferroelectric subsystems within Zn 1-x Mg x O. A “fringing-ridge mechanism” of polarization switching is proposed that is characterized by initial lateral expansion of nucleation without significant propagation in depth, contradicting the conventional domain growth process observed in ferroelectrics. This unique polarization dynamics in Zn 1-x Mg x O suggests a new understanding of ferroelectric behavior, contributing to both the fundamental science of ferroelectrics and their application in information technology.
36 MATERIALS SCIENCE↗
Thermal Optimization of a Silicon Carbide, Half-Bridge Power Module
This project describes the modeling process to design the packaging and heat exchanger for a half-bridge wide-bandgap (WBG) power semiconductor module. The module uses two silicon carbide, metal-oxide-semiconductor field-effect transistor (MOSFET) devices per switch position that are soldered to an aluminum nitride, direct-bond copper (DBC) substrate. A baseplate cooling configuration (e.g., no thermal grease) is used along with a water-ethylene glycol, jet-impingement-style heat exchanger. The heat exchanger was designed to be fabricated using prototyping equipment from the National Renewable Energy Laboratory, complies with automotive standards (for minimal channel sizes, flow rates, and coolant), and considers reliability aspects (i.e., erosion/corrosion). Device-scale computational fluid dynamics (CFD) is used first to design the slot jet impingement cooling configuration and compute the effective heat transfer coefficient (HTC) of the concept. The computed HTCs are then used as boundary conditions for a finite element study to optimize the package geometry (e.g., device layout and baseplate thickness) to minimize thermal resistance and minimize temperature variation between the module's four devices. Finally, a fluid manifold is designed to generate the slot jets and cool the devices. Module-scale CFD predicts a relatively low junction-to-fluid thermal resistance of 16.7 mm2 K/W, a 1.4 degrees C temperature variation between devices, and a total pressure drop of 5,860 Pa (0.85 psi) for the design. The thermal resistance of the module design is about 67% lower than the 2015 BMW i3 power electronics/modules thermal resistance.
DIRECT ENERGY CONVERSION↗
A Smart Silicon Carbide Power Module With Pulse Width Modulation Over Wi-Fi and Wireless Power Transfer-Enabled Gate Driver, Featuring Onboard State of Health Estimator and High-Voltage Scaling Capabilities
A wide range of utility applications require controllable switches with features such as high-voltage blocking and high-current carrying capacity, especially at high pulse width modulation (PWM) frequency. Low- and medium-voltage utility applications such as motor drives and flexible AC transmission systems as well as solid state transformers could also benefit from a low-cost high-voltage switching module. Wide-bandgap semiconductors such as silicon carbide (SiC) and gallium nitride (GaN) metal oxide semiconductor field effect transistors (MOSFETs) are considered to be the present and next-generation device choices, although they have limitations. For relatively high-voltage applications with demanding thermal management, SiC is still the only choice, and GaN dominates the low-voltage regime. This manuscript proposes a new half-bridge power MOSFET module that is suitable for conventional H-bridge of multilevel configurations used in high-voltage applications. Constructed from bare SiC dies, this half-bridge module takes advantage of (1) optimized MOSFET placement inside the module, (2) customized heat exchanger, manifold, and cooling, (3) integrated gate driver module with pulse width modulation (PWM) over wi-fi to eliminate the need for low-voltage signals, (4) wireless power transfer (WPT)-enabled gate driver and other ancillary circuits, (5) and the option to incorporate an onboard state-of-health (SOH) estimator module. The entire architecture has been designed and built at the National Renewable Energy Laboratory (NREL) in Golden, CO.
Ga2O3 devices↗
Direct Visualization of Charge Migration in Bilayer Tantalum Oxide Films by Multimodal Imaging
Inspired by biological neuromorphic computing, artificial neural networks based on crossbar arrays of bilayer tantalum oxide memristors have shown to be promising alternatives to conventional complementary metal-oxide-semiconductor (CMOS) architectures. In order to understand the driving mechanism in these oxide systems, tantalum oxide films are resistively switched by conductive atomic force microscopy (C-AFM), and subsequently imaged by kelvin probe force microscopy (KPFM) and spatially resolved time-of-flight secondary ion mass spectrometry (ToF-SIMS). These workflows enable induction and analysis of the resistive switching mechanism as well as control over the resistively switched region of the film. In this work it is shown that the resistive switching mechanism is driven by both current and electric field effects. Reversible oxygen motion is enabled by applying low (<1 V) electric fields, while high electric fields generate irreversible breakdown of the material (>1 V). Fully understanding oxygen motion and electrical effects in bilayer oxide memristor systems is a fundamental step toward the adoption of memristors as a neuromorphic computing technology.
36 MATERIALS SCIENCE↗
Interfacial oxide and other species in trimethylaluminum-pretreated atomic layer deposition-Al 2 O 3 /GaN characterized by sputter-assisted ToF-SIMS
Deposition techniques, like atomic layer deposition (ALD), are used to form high-quality dielectrics for GaN-based metal–oxide–semiconductor (MOS) gate structures due to the lack of a reliable thermal oxide in GaN. Moreover, interfacial GaO x from pre-existing native oxides is thought to adversely impact channel carrier dynamics and induce undesired threshold voltage shifts in GaN-based MOS gate structures. Exposure of the GaN surface to the trimethylaluminum (TMA) precursor prior to standard alumina ALD decreases the native oxide layer on GaN, but the extent of chemical modification has not been well studied in the context of interface composition in a MOS gate structure. Herein, we compare annealed 55 nm Al 2 O 3 dielectric films on GaN grown using either a water-first ALD process or a process including sequential pulses of TMA immediately before the initiation of Al 2 O 3 ALD. Time-of-Flight Secondary Ion Mass Spectrometry measures differences in the interfacial GaO x content between each ALD film. Here, it also detects surface contaminant species like Si, F, S, and C. Furthermore, we report the formation of an AlN species at the Al 2 O 3 /GaN interface, which is more prominent for the film grown using the TMA pre-pulse step. In general, this work demonstrates that the TMA pre-pulse step is an effective strategy for cleaning substrate surfaces prior to ALD.
Atomic layer deposition↗
Epitaxial SrTiO 3 films with dielectric constants exceeding 25,000
Significance Semiconductor interfaces are among the most important in use in modern technology. The properties they exhibit can either enable or disable the characteristics of the materials they connect for functional performance. While much is known about important junctions involving conventional semiconductors such as Si and GaAs, there are several unsolved mysteries surrounding interfaces between oxide semiconductors. Here we resolve a long-standing issue concerning the measurement of anomalously low dielectric constants in SrTiO 3 films with record high electron mobilities. We show that the junction between doped and undoped SrTiO 3 required to make dielectric constant measurements masks the dielectric properties of the undoped film. Through modeling, we extract the latter and show that it is much higher than previously measured.
36 MATERIALS SCIENCE↗
Off-state magnetoresistance in long-channel germanium Schottky-barrier MOSFETs
An increasing magnetic field perpendicular to an undoped semiconductor surface at low temperature is known to strengthen the binding of localized electrons to stationary ions, as the wavefunction's tails evolve from exponential to Gaussian. It is also known that application of a high bias voltage to a depleted semiconductor can liberate bound charge and induce a large drop in electrical resistance. We connect these established results to experimental electrical transport measurements on off-state germanium Schottky-barrier metal–oxide–semiconductor field-effect transistor (MOSFETs) with an aluminum oxide insulating dielectric and platinum germanide contacts. We make measurements at the three distinct orientations of the magnetic field with respect to the substrate and the current. At 6 K, we observe sharp attenuation of current by more than 2 orders of magnitude, within 60 mT, at a crossover magnetic field perpendicular to the substrate. A 1 T magnetic field attenuates the current by more than 4 orders of magnitude. The strength of the attenuation and the value of the crossover field are controlled by both the gate–source and drain–source voltages. The attenuation is much weaker when the magnetic field is parallel to the current. Finally, we orient the magnetic field parallel to the substrate, but perpendicular to the current, allowing us to distinguish charge hopping at the oxide interface from charge hopping in the bulk. In conclusion, this large off-state magnetoresistance can be exploited for cryogenic magnetic- and photo-detection, and for high-bias, low-leakage MOSFETs.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗