Search NASA⌕ Search

SEARCH · Search NASA

Results for “oxidizing and reducing conditions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Seasonal Fluctuations in Iron Cycling in Thawing Permafrost Peatlands

In permafrost peatlands, up to 20% of total organic carbon (OC) is bound to reactive iron (Fe) minerals in the active layer overlying intact permafrost, potentially protecting OC from microbial degradation and transformation into greenhouse gases (GHG) such as CO 2 and CH 4 . During the summer, shifts in runoff and soil moisture influence redox conditions and therefore the balance of Fe oxidation and reduction. Whether reactive iron minerals could act as a stable sink for carbon or whether they are continuously dissolved and reprecipitated during redox shifts remains unknown. We deployed bags of synthetic ferrihydrite (FH)-coated sand in the active layer along a permafrost thaw gradient in Stordalen mire (Abisko, Sweden) over the summer (June to September) to capture changes in redox conditions and quantify the formation and dissolution of reactive Fe(III) (oxyhydr)oxides. We found that the bags accumulated Fe(III) under constant oxic conditions in areas overlying intact permafrost over the full summer season. In contrast, in fully thawed areas, conditions were continuously anoxic, and by late summer, 50.4 ± 12.8% of the original Fe(III) (oxyhydr)oxides were lost via dissolution. Periodic redox shifts (from 0 to +300 mV) were observed over the summer season in the partially thawed areas. This resulted in the dissolution and loss of 47.2 ± 20.3% of initial Fe(III) (oxyhydr)oxides when conditions are wetter and more reduced, and new formation of Fe(III) minerals (33.7 ± 8.6% gain in comparison to initial Fe) in the late summer under more dry and oxic conditions, which also led to the sequestration of Fe-bound organic carbon. Our data suggest that there is seasonal turnover of iron minerals in partially thawed permafrost peatlands, but that a fraction of the Fe pool remains stable even under continuously anoxic conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Oxidation and Reduction of Polycrystalline Cerium Oxide Thin Films in Hydrogen

This study investigates the oxidation state of ceria thin films' surface and subsurface under 100 mTorr hydrogen using ambient pressure X-ray photoelectron spectroscopy. We examine the influence of the initial oxidation state and sample temperature (25-450 °C) on the interaction with hydrogen. Our findings reveal that the oxidation state during hydrogen interaction involves a complex interplay between oxidizing hydride formation, reducing thermal reduction, and reducing formation of hydroxyls followed by water desorption. In all studied conditions, the subsurface exhibits a higher degree of oxidation compared to the surface, with a more subtle difference for the reduced sample. The reduced samples are significantly hydroxylated and covered with molecular water at 25 °C. We also investigate the impact of water vapor impurities in hydrogen. We find that although 1 × 10 -6 Torr water vapor oxidizes ceria, it is probably not the primary driver behind the oxidation of reduced ceria in the presence of hydrogen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

CO Oxidation Catalyzed by Au Dispersed on SBA-15 Modified with TiO2 Films Grown via Atomic Layer Deposition (ALD)

It has been established that gold, when in nanoparticle (NP) form and in contact with reducible oxides, can promote oxidation reactions under mild conditions. Here, we report results from our exploration of the catalytic oxidation of carbon monoxide using catalysts where Au NPs were combined with thin titanium oxide films deposited on SBA-15 using atomic layer deposition (ALD). Both orders of deposition, with TiO2 added either before or after Au dispersion, were tested for two titania film thicknesses amounting to about half and full TiO2 monolayers. The resulting catalysts were characterized using various techniques, mainly electron microscopy and N2 adsorption–desorption isotherms, and the kinetics of the oxidation of CO with O2 were followed using infrared absorption spectroscopy. A synergy between the Au and TiO2 phases as it relates to the bonding and conversion of CO was identified, the tuning of which could be controlled by varying the synthetic parameters. The ALD of TiO2 films proved to be an effective way to maximize the Au-TiO2 interface sites, and with that help with the activation of molecular oxygen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Fission gas diffusion and release for Cr 2 O 3 -doped UO 2 : From the atomic to the engineering scale

Here, the anticipated benefits of large grains in Cr 2 O 3 -doped UO 2 pellets include improved mechanical and fission gas retention properties. To support the assessment of fission gas release (FGR) from doped pellets, the impact of doping on fission gas diffusivity for in-reactor conditions must be understood. In this work, we tackle this issue by informing the fission gas model within the BISON fuel performance code using material models developed at the atomic scale. The investigation of intra-granular fission gas diffusivity in Cr 2 O 3 -doped UO 2 is carried out by adapting a cluster dynamics model that, accounting for UO 2 thermochemistry, is capable of describing Xe diffusion under irradiation in undoped UO 2 as the starting point. Using a thermodynamic analysis, it is shown that in stoichiometric UO 2 with additions of Cr 2 O 3 the oxygen potential is defined by the Cr-Cr 2 O 3 two-phase equilibrium. Using the cluster dynamics model, the predicted Xe diffusivity in doped UO 2 was significantly increased in both the intrinsic and irradiation-enhanced regimes compared to undoped UO 2 as a result of higher concentrations of uranium and oxygen vacancies, respectively. This is a consequence of the more oxidizing conditions at high temperature, and more reducing conditions at low temperature, as a result of doping. Arrhenius functions have been fitted to the cluster dynamics results to enable implementation of the new diffusivities in the BISON fission gas behavior model. BISON simulations were carried out, showing the competing effects of the enlarged grains and the new fission gas diffusivity model, which act to suppress and enhance fission gas release, respectively. The new physics-informed model was validated against in-reactor experimental measurements under normal operation. Additionally, benchmarking was carried out for power ramp conditions. The predicted fission gas release agreed well with the experimental data, showing noticeable improvements over the standard UO 2 model.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effect of feed composition on the production of off-gases during vitrification of simulated low-activity nuclear waste

During the vitrification of nuclear waste, hazardous and radioactive emissions are generated from the feed-to-glass conversion reactions, in addition to discharges from forced air bubbling and air inleakage. Although the major gaseous emissions are water vapor, nitrogen, and carbon dioxide, various monitored environmental pollutants are also released, such as nitrogen oxides or sulfur dioxide. In addition, reactions between organics and nitrates in the feed may also form products of incomplete combustion such as carbon monoxide and acetonitrile. Although off-gas emissions are commonly measured during both laboratory- and pilot-scale melter testing, no predictive tool is currently available to a priori estimate the composition of gaseous emissions during nuclear waste vitrification. This work forms a basis for the development of such predictive tool by measuring gas evolution from a broad range of simulated low-activity waste melter feeds using evolved gas analysis data and developing correlations between the feed and off-gas compositions. Using reaction stoichiometry and regression analysis, we demonstrate that next to the content of nitrogen and organic carbon in the feed, the gaseous emissions are affected by the feed reduction-oxidation conditions – the more the feed is reduced, the less nitrogen monoxide, and more carbon monoxide and acetonitrile evolves. In conclusion, the results presented in this work provide a first step towards reducing the amount of expensive physical melter testing and the regression analysis provides a simple tool for rapid optimization of feed composition with respect to off-gas composition.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Redox active plant phenolic, acetosyringone, for electrogenetic signaling

Abstract Redox is a unique, programmable modality capable of bridging communication between biology and electronics. Previous studies have shown that the E. coli redox-responsive OxyRS regulon can be re-wired to accept electrochemically generated hydrogen peroxide (H 2 O 2 ) as an inducer of gene expression. Here we report that the redox-active phenolic plant signaling molecule acetosyringone (AS) can also induce gene expression from the OxyRS regulon. AS must be oxidized, however, as the reduced state present under normal conditions cannot induce gene expression. Thus, AS serves as a “pro-signaling molecule” that can be activated by its oxidation—in our case by application of oxidizing potential to an electrode. We show that the OxyRS regulon is not induced electrochemically if the imposed electrode potential is in the mid-physiological range. Electronically sliding the applied potential to either oxidative or reductive extremes induces this regulon but through different mechanisms: reduction of O 2 to form H 2 O 2 or oxidation of AS. Fundamentally, this work reinforces the emerging concept that redox signaling depends more on molecular activities than molecular structure. From an applications perspective, the creation of an electronically programmed “pro-signal” dramatically expands the toolbox for electronic control of biological responses in microbes, including in complex environments, cell-based materials, and biomanufacturing.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Distinctive Oxide Films Develop on the Surface of FeCrAl as the Environment Changes for Nuclear Fuel Cladding

The corrosion-resistant properties of IronChromium–Aluminum (FeCrAl) alloys have been known for nearly a century. Since the 1950s, they have been explored for application in the generation of nuclear power. In the last decade, the focus has been on the use of FeCrAl as cladding for uranium dioxide fuel in light water reactors (LWRs). The corrosion resistance of this alloy depends on the oxide that it can develop on the surface. In LWRs in the vicinity of 300 °C, the external surface oxide of the FeCrAl cladding could be rich in Fe under oxidizing conditions but rich in Cr under reducing conditions. If there is an accident and the cladding is exposed to superheated steam, the cladding will protect itself by developing an alpha aluminum film on the surface.

Qu, Haozheng↗
DOE OSTI2021

Spontaneous N 2 formation by a diruthenium complex enables electrocatalytic and aerobic oxidation of ammonia

The electrochemical conversion of ammonia to dinitrogen in a direct ammonia fuel cell (DAFC) is a necessary technology for the realization of a Nitrogen Economy. Previous efforts to catalyze this reaction with molecular complexes require the addition of exogenous oxidizing reagents or application of potentials greater than the thermodynamic potential for the oxygen reduction reaction (ORR) – the cathodic process of a DAFC. We report a stable metal–metal bonded diruthenium complex that spontaneously produces dinitrogen from ammonia under ambient conditions. The resulting reduced diruthenium material can be re-oxidized with oxygen for subsequent reactions with ammonia, demonstrating its ability to spontaneously promote both half reactions necessary for a DAFC. Here, the diruthenium complex also acts as a redox mediator for the electrocatalytic oxidation of ammonia to dinitrogen at potentials as low as –255 mV vs Fc 0/+ and operates below the ORR potential in alkaline conditions, thus achieving a thermodynamic viability relevant for the future development of DAFCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

In situ catalyst activation and regeneration enable energy-efficient high-current CO 2 reduction to ethanol-rich C 2+ mixtures

Electrochemical conversion of dissolved CO 2 in bicarbonate electrolytes, i.e., bicarbonate electrolysis, offers distinct advantages over gas diffusion electrode systems by enabling direct utilization of the CO 2 capture electrolyte while bypassing the energy-intensive CO 2 release step. However, bicarbonate electrolysis faces challenges such as CO 2 mass-transfer limitation, local pH-driven CO 2 depletion, and high cathodic potentials. The higher potential often causes catalyst surface reorganization, leading to a gradual loss of active sites and variations in selectivity during CO 2 reduction. Here, we report a directed, in situ activation and regeneration method that allows precatalysts to equilibrate under dynamic (pulsed) electrolysis conditions. We demonstrate in situ activation of a scalable Cu 2 O/Cu mesh that, under short-width (t = 4 s) pulsed electrolysis, provides stable mixed oxidation states of Cu, favoring the formation of an ethanol-rich crude mixture. The pulsed electrolysis waveform, consisting of six distinct segments, is tuned to form Cu + oxides, which are then reduced to generate local alkaline conditions favoring C–C coupling. This synergistic effect results in FEs of 73% for C2+ products and 39% for ethanol at an applied current density of −150 mA cm −2 and a cathodic potential of −1.45 V (vs. RHE). The overall half-cell energy efficiency is ∼30% for C 2+ products. The in situ Raman experiments confirm the role of pCO 2 R in dynamically regenerating Cu+-containing surface species during pulsed operation, thereby steering selectivity towards C 2+ products. A comprehensive multiscale, multiphysics model is developed to investigate the dynamic behavior of copper surface species (Cu, Cu + , and Cu 2+ ) and local microenvironmental conditions during the pCO 2 R. The results reveal that the coexistence of different copper oxidation states, especially the Cu+ intermediate, is critical in steering selectivity towards multicarbon (C 2+ ) products. The dynamic modulation of surface redox states via tailored pulsing strategies favors C–C coupling pathways by inducing localized alkaline conditions and stabilizing reactive intermediates. This work establishes a predictive modeling platform that links pulse waveform design with mechanistic insights into catalyst state evolution and product selectivity. Overall, this study provides valuable insights into the synergistic effect of in situ activation of pre-catalysts and pulsed electrolysis for higher selectivity towards C 2+ products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Pt Particles on a Dynamic TiO 2 Support in Near-Ambient Conditions−Disentangling Size, Pressure, and Support Effects

Platinum particles on reducible oxides are known to form complex and highly dynamic catalyst systems at elevated pressures and temperatures, often adopting active structures that differ from those found at room temperature and under ultrahigh vacuum (UHV). Here, we study the oxidation and structural evolution of subnanometer Pt clusters and nanoparticles supported on rutile TiO 2 (110) across an oxygen pressure range from UHV to 0.1 mbar, using near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS), scanning tunneling microscopy (STM) under UHV and NAP conditions, and low-energy ion scattering (LEIS). Our results reveal distinct differences in oxidation behavior and thermal stability between Pt nanoparticles and clusters, which are further modulated by the support stoichiometry and oxygen pressure. Small Pt clusters become oxidized even at room temperature but are susceptible to accelerated sintering in 0.1 mbar O 2 at elevated temperatures. In contrast, well-crystallized Pt nanoparticles on near-stoichiometric TiO 2 show weaker oxidation. On a reduced, defective TiO 2 support, Pt instead quickly becomes deeply buried by new titania layers, which are formed during support reoxidation. This process appears to result primarily from interactions of the support with the gas phase, unlike the classical, selflimited encapsulation that is induced by the strong metal−support interaction (SMSI). Finally, we address the full complexity of real catalysts in a direct side-by-side comparison of the single-crystalline model system with a Pt-loaded TiO 2 powder catalyst (P25). We conclude that the stoichiometry of the model supports must be carefully chosen and controlled to accurately reproduce the expected state of powder supports during redox reactions.

metal nanoparticles↗
DOE OSTI2023

A comparative study of cerium oxides formed by pulsed laser ablation and continuous wave laser heating

Abstract The formation of Ce 2 O 3 from cerium metal requires complex reducing conditions. Alternatively, we show that different stoichiometries and structures of cerium oxides can be generated in high‐temperature laser experiments by varying the availability of oxygen and the use of either pulsed laser ablation (PLA) or continuous wave (CW) laser heating of cerium metal. X‐ray diffraction and Raman spectroscopy suggest that a low structural order Ce 2 O 3 /CeO 2 mixed structure is formed in a 1% O 2 atmosphere with PLA. For CW heating in a 1% O 2 environment, Raman measurements show the formation of crystalline A‐type Ce 2 O 3 in proximity to the point of laser impingement. These experiments were repeated in 18 O 2 and allowed us to report for the first time the corresponding Raman spectrum of Ce 2 18 O 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Progress in modeling hydrogen assisted ammonia oxidation with new experiments and a further reconciliation of the NH 3 + OH rate constant

Hydrogen-assisted oxidation of ammonia in a premixed, laminar flow tubular reactor under reducing conditions was investigated experimentally and through chemical kinetic modeling. Due to its impact on the competition for OH among ammonia and hydrogen, the rate constant for NH 3 + OH (R1) was determined through state-of-the-art theoretical kinetics calculations, employing composite energies that include the effects of higher order electronic excitations on the electronic energies along the variational reaction path and treating the limitations in the kinetics posed by the passage through a hydrogen-bonded complex. The resulting rate constant was in close agreement with the recent experimental value from Zaczek et al. (2025), settling a long-term dispute about the high-temperature value of k 1 and confirming within 20% the value previously used in modeling. The chemical kinetic model, with no other changes, captured well measured concentrations of NH 3 , H 2 , NO, and N 2 O from flow reactor oxidation of NH 3 /H 2 at slightly reducing conditions over a range of temperature (900-1350 K) and NH 3 /H 2 ratios (0.5-2.0). Comparison of the present results with reported data from a non-premixed setup indicates that for laminar flow tubular reactors, the reactor configuration may have implications for the observed H 2 consumption due to the possibility of preferential oxidation during mixing.

Ab initio theory↗
DOE OSTI2024

Seasonal Controls on Microbial Depolymerization and Oxidation of Organic Matter in Floodplain Soils

Floodplain soils are vast reservoirs of organic carbon often attributed to anaerobic conditions that impose metabolic constraints on organic matter degradation. What remains elusive is how such metabolic constraints respond to dynamic flooding and drainage cycles characteristic of floodplain soils. Here, in this work, we show that microbial depolymerization and respiration of organic compounds, two rate-limiting steps in decomposition, vary spatially and temporally with seasonal flooding of mountainous floodplain soils (Gothic, Colorado, USA). Combining metabolomics and -proteomics, we found a lower abundance of oxidative enzymes during flooding coincided with the accumulation of aromatic, high-molecular weight compounds, particularly in surface soils. In subsurface soils, we found that a lower oxidation state of carbon coincided with a greater abundance of chemically reduced, energetically less favorable low-molecular weight metabolites, irrespective of flooding condition. Our results suggest that seasonal flooding temporarily constrains oxidative depolymerization of larger, potentially plant-derived compounds in surface soils; in contrast, energetic constraints on microbial respiration persist in more reducing subsurface soils regardless of flooding. Our work underscores that the potential vulnerability of these distinct anaerobic carbon storage mechanisms to changing flooding dynamics should be considered, particularly as climate change shifts both the frequency and extent of flooding in floodplains globally.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Tuning Catalytic Reactivity via Wetting Control through Oxygen Vacancies: Ru Clusters on Anatase TiO 2 and CeO 2 Supports

The shape of supported metal particles regulates their catalytic reactivity and is determined by the degree of wetting between the metal particle and the support surface. Flattened particles that wet support surfaces were reported in various catalytic systems, particularly in the subnanometer size regime. Such consequential metal–support wetting phenomena are poorly understood, and methods to study them on powder catalysts under realistic conditions are lacking. Here, we investigate the size-dependent wetting behaviors of Ru particles on two reducible-oxide supports, anatase TiO 2 (TiO 2 -A) and CeO 2 , under reducing catalytic conditions. X-ray absorption spectroscopy (XAS), low-energy ion scattering (LEIS), and density functional theory (DFT) are combined to determine the shape of Ru particles. Ru particles remain three-dimensional without wetting the TiO 2 -A support within the coverage range studied (0.06–0.98 Ru nm –2 ). In contrast, at low coverages (<0.25 Ru nm –2 ), Ru wets the CeO 2 support to form flat, disordered structures. The higher wettability of CeO 2 than TiO 2 -A is attributed to oxygen vacancies in the near-surface region. The shape difference between small Ru particles or clusters on the two supports leads to drastically contrasting catalytic reactivities in polyolefin hydrogenolysis, despite similar diameters. As a result, this work highlights the implications of metal–support wetting, or cluster shape, on catalytic behaviors of small metal clusters, while establishing the foundation for future systematic studies of such a phenomenon in realistic systems, by delivering a multitechnique methodology and revealing governing fundamental principles.

42 ENGINEERING↗
DOE OSTI2021

Infrared reflection absorption spectroscopy and temperature-programmed desorption studies of CO adsorption on Ni/CeO 2 (111) thin films: The role of the ceria support

Ceria-supported Ni has shown unique catalytic activity due to unique properties of small Ni particles and strong metal-support interaction. Identification of adsorption sites and understanding the chemical interaction over Ni-ceria at the fundamental level provide crucial insights into the reaction pathways of complex catalytic processes. In this study, to probe the surface sites, the adsorption of CO was carried out with model Ni/ceria systems consisting of Ni nanoparticles vapor-deposited on well-ordered CeO x (111) (1.5 < x < 2) thin films using infrared reflection absorption spectroscopy (IRRAS) and temperature-programmed desorption (TPD) under ultrahigh vacuum (UHV) conditions. Fully oxidized CeO 2 (111) (Ce 4+ ) and partially reduced CeO 1.75 (111) (Ce 4+ /Ce 3+ ) thin films were grown on Ru(0001) to examine the role of the ceria support. Additionally, Ni with low coverages (e.g., 0.2 ML) grows forming small two-dimensional particles on ceria at 300 K, which develop into three-dimensional clusters after heating to 700 K. In the absence of Ni, CO adsorption at 1 mTorr at 100 K shows distinct IR bands at 2158 cm -1 on CeO 2 and 2165 cm -1 on CeO 1.75 . Bridging and atop IR bands associated with CO adsorption over metallic Ni were observed on the Ni-CeO 1.75 surface at 300 K under UHV conditions. CO adsorption over Ni 0 was also observed over as-deposited Ni on CeO 2 . However, a new IR band at 2146 cm -1 due to CO adsorption over Ni 2+ species was detected at 100 K over the annealed Ni particles on CeO 2 . CO IRRAS data suggest the oxidation of Ni to Ni 2+ on CeO 2 and the formation of predominant Ni 2+ species with heating, which is further confirmed with CO TPD data and previous x-ray photoelectron spectroscopy results.

36 MATERIALS SCIENCE↗
DOE OSTI2022

An Abundant and Diverse New Family of Electron Bifurcating Enzymes With a Non-canonical Catalytic Mechanism

Microorganisms utilize electron bifurcating enzymes in metabolic pathways to carry out thermodynamically unfavorable reactions. Bifurcating FeFe-hydrogenases (HydABC) reversibly oxidize NADH (E′∼−280 mV, under physiological conditions) and reduce protons to H 2 gas (E°′−414 mV) by coupling this endergonic reaction to the exergonic reduction of protons by reduced ferredoxin (Fd) (E′∼−500 mV). We show here that HydABC homologs are surprisingly ubiquitous in the microbial world and are represented by 57 phylogenetically distinct clades but only about half are FeFe-hydrogenases. The others have replaced the hydrogenase domain with another oxidoreductase domain or they contain additional subunits, both of which enable various third reactions to be reversibly coupled to NAD + and Fd reduction. We hypothesize that all of these enzymes carry out electron bifurcation and that their third substrates can include hydrogen peroxide, pyruvate, carbon monoxide, aldehydes, aryl-CoA thioesters, NADP + , cofactor F 420 , formate, and quinones, as well as many yet to be discovered. Some of the enzymes are proposed to be integral membrane-bound proton-translocating complexes. These different functionalities are associated with phylogenetically distinct clades and in many cases with specific microbial phyla. We propose that this new and abundant class of electron bifurcating enzyme be referred to as the Bfu family whose defining feature is a conserved bifurcating BfuBC core. This core contains FMN and six iron sulfur clusters and it interacts directly with ferredoxin (Fd) and NAD(H). Electrons to or from the third substrate are fed into the BfuBC core via BfuA. The other three known families of electron bifurcating enzyme (abbreviated as Nfn, EtfAB, and HdrA) contain a special FAD that bifurcates electrons to high and low potential pathways. The Bfu family are proposed to use a different electron bifurcation mechanism that involves a combination of FMN and three adjacent iron sulfur clusters, including a novel [2Fe-2S] cluster with pentacoordinate and partial non-Cys coordination. The absolute conservation of the redox cofactors of BfuBC in all members of the Bfu enzyme family indicate they have the same non-canonical mechanism to bifurcate electrons. A hypothetical catalytic mechanism is proposed as a basis for future spectroscopic analyses of Bfu family members.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

A Review of Inkjet Printed Graphene and Carbon Nanotubes Based Gas Sensors

Graphene and carbon nanotube (CNT)-based gas/vapor sensors have gained much traction for numerous applications over the last decade due to their excellent sensing performance at ambient conditions. Inkjet printing various forms of graphene (reduced graphene oxide or modified graphene) and CNT (single-wall nanotubes (SWNTs) or multiwall nanotubes (MWNTs)) nanomaterials allows fabrication onto flexible substrates which enable gas sensing applications in flexible electronics. This review focuses on their recent developments and provides an overview of the state-of-the-art in inkjet printing of graphene and CNT based sensors targeting gases, such as NO 2 , Cl 2 , CO 2 , NH 3 , and organic vapors. Moreover, this review presents the current enhancements and challenges of printing CNT and graphene-based gas/vapor sensors, the role of defects, and advanced printing techniques using these nanomaterials, while highlighting challenges in reliability and reproducibility. The future potential and outlook of this rapidly growing research are analyzed as well.

flexible electronics↗
DOE OSTI2023

Intra-catalyst CH 4 oxidation pathways on a Pd/Al 2 O 3 /CeZrO x -based commercial catalyst and implications on NO x conversion profiles for a natural gas vehicle exhaust under lambda modulation

The performance of a three-way catalyst (TWC) in natural gas-powered vehicles is enhanced by periodic changes in air-to-fuel ratio (λ-modulation). The reaction networks and sequences inside the catalyst that facilitate such enhanced performance have not been extensively investigated. Here, this work applied intra-catalyst measurements (SpaciMS) to analyze the transient spatiotemporal gas concentrations inside a Pd-based TWC to establish relationships between CH 4 , NO x , CO and H 2 conversion pathways. Steam reforming and partial oxidation were revealed to be the main CH 4 conversion routes. The cyclic rich-lean conditions combined with the oxygen storage capacity (OSC) of the TWC generate reduced and oxidized zones that are constantly moving within the catalyst, changing the dominant chemical reactions occurring on the surface. In the reduced zones, OSC is depleted while CH 4 is converted through steam reforming and NO x is converted through reactions with H 2 , CO, and other surface-bound reducing fragments formed by CH 4 conversion. In the oxidized zones, OSC is replenished, CH 4 is converted by partial oxidation, and H 2 , CO, and NH 3 are oxidized. The length of lean-rich phases impacts the catalyst performance significantly; too short or too long of a rich or lean phase can lower the overall conversion of reactive species. An inhibition of CH 4 conversion was observed during the rich phase possibly due to CO-poisoning of active sites. The intra-catalyst measurements revealed that the catalyst consists of three distinct reaction zones and their lengths vary with modulation conditions. Various modulation frequencies, amplitudes, λ-centers, and temperatures were investigated which allowed an understanding of how these parameters affect the reaction zones and catalyst utilization. Understandings from this work can enable adaptive λ-control strategies to optimize the overall TWC performance over a range of vehicle operating conditions.

Lean-Rich cycling↗