Search NASA⌕ Search

SEARCH · Search NASA

Results for “parameter compression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Impact resistance and interlaminar fracture toughness of through-the-thickness reinforced graphite/epoxy

Five through-the-thickness stitch configurations are analyzed to determine the effect of impact resistance and interlaminar fracture toughness on T3000/3501-6 graphite/epoxy. The test specimens were stitched with either polyester or Kevlar yarns and with various stitch parameters. Tension and compression mechanical, impact and compression-after-impact, and double cantilever beam tests were conducted. It is observed that the stitched laminates have tension and compression strengths 20-25 percent lower than the strengths of unstitched laminates, the tension strength of stitched laminates is reduced with increasing number of stitches, and the compression strength increases as the number of stitches are increased. The impact data reveal that the Kevlar stitched laminates have less damage than unstitched laminates; the most effective configuration for suppressing impact damage and improving interlaminar fracture toughness consists of Kevlar yarns 1/4 inch apart with eight stitches per inch. The mode 1 critical strain energy release rate for the 1/4 inch Kevlar eight stitch laminate was calculated as 30 times higher than that of the unstitched.

Dexter, H. B.↗
NASA NTRS1986

A structural-stochastic model for the analysis and synthesis of cloud images

A structural-stochastic image model is developed for the analysis and synthesis of cloud images. The ability of the model to characterize the visual appearance of cloud fields observed by satellite with a limited number of parameters is demonstrated. The model merges structural and stochastic information, the stochastic model acting as a local statistical operator applied to the output of the structural model. The structural or large-scale organization of the scene is retrieved from the two-dimensional Fourier representation of the digital image. The pattern generated by the major Fourier components provides a first guess of the scene. The stochastic aspect is described by a Markov model of texture that assumes a binomial probability distribution for the local grey-level variability. This Markov model provides four parameters that represent the clustering strength in the horizontal, vertical and diagonal directions. These parameters are estimated by a standard maximum-likelihood technique. The image can be reproduced with a fair degree of verisimilitude from these parameters. The data compression factor is of the order of one hundred to several hundreds.

Garand, L.↗
NASA NTRS1994

Automatic commanding of the Mars Observer Camera

Mars Observer, launched in September 1992, was intended to be a 'survey-type' mission that acquired global coverage of Mars from a low, circular, near-polar orbit during an entire Martian year. As such, most of its instruments had fixed data rates, wide fields of view, and relatively low resolution, with fairly limited requirements for commanding. An exception is the Mars Observer Camera, or MOC. The MOC consists of a two-color Wide Angle (WA) system that can acquire both global images at low resolution (7.5 km/pixel) and regional images at commandable resolutions up to 250 m/pixel. Complementing the WA is the Narrow Angle (NA) system, that can acquire images at 8 resolutions from 12 m/pixel to 1.5 m/pixel, with a maximum crosstrack dimension of 3 km. The MOC also provides various forms of data compression (both lossless and lossy), and is designed to work at data rates from 700 bits per second (bps) to over 80k bps. Because of this flexibility, developing MOC command sequences is much more difficult than the routine mode-changing that characterizes other instrument operations. Although the MOC cannot be pointed (the spacecraft is fixed nadir-pointing and has no scan platform), the timing, downlink stream allocation, compression type and parameters, and image dimensions of each image must be commanded from the ground, subject to the constraints inherent in the MOC and the spacecraft. To minimize the need for a large operations staff, the entire command generation process has been automated within the MOC Ground Data System. Following the loss of the Mars Observer spacecraft in August 1993, NASA intends to launch a new spacecraft, Mars Global Surveyor (MGS), in late 1996. This spacecraft will carry the MOC flight spare (MOC 2). The MOC 2 operations plan will be largely identical to that developed for MOC, and all of the algorithms described here are applicable to it.

Caplinger, Michael↗
DOE OSTI2024

Recovery of Natural Gas Equipment Emissions into Gas Compression Engines for the Reduction of Potential Greenhouse Gas Emissions

Since the turn of the millennium, the United States (U.S.) oil and natural gas (ONG) industry has nearly doubled its natural gas production rate. As a result, the ONG industry has recently come under increasing scrutiny for its contributions to greenhouse gas (GHG) emissions. Consequently, various solutions to this problem have been proposed and formulated to reduce the impacts of GHG emissions on the environment. West Virginia University (WVU) have found it important to research the impacts of recovering vented gas streams into prime-mover engines. The U.S. Department of Energy (DOE) and National Energy Technology Laboratory (NETL) have granted WVU funding to research and develop a “Methane Mitigator” (M2) - a “Scalable Vent Mitigation Strategy to Simultaneously Reduce Methane Emissions and Fuel Consumption from the Compression Industry.” One of the main areas of interest for this research was the collection of emissions from natural gas equipment into a Caterpillar G3508J natural gas compression engine. The parameters being analyzed from the engine were brake-specific emissions and power output. The emissions sources considered for this research were pneumatic controllers (PCs), reciprocating compressor vents, and the engine’s open crankcase breather. The compressor vent and PC emissions were simulated using a mass flow controller (MFC) and flowed into the engine using two separate methods: (1) directly into the air intake, and (2) through a retrofitted closed crankcase ventilation system (CCV), serving as a buffer volume. The crankcase emissions were quantified without the CCV, and the impact on exhaust emissions from circulating the crankcase gases into the intake was measured. The simulated compressor vent and PC flows from the MFC had limited effect on the steady state operation of the engine and resulting performance. When the simulated flows were fed directly into the engine’s air intake, the changes within the engine’s continuous performance and emission parameters were larger but lasted for shorter durations. Conversely, when the simulated flows were fed into the CCV before entering the air intake, the changes in the engine’s performance and emission parameters were less pronounced for continuous analysis but lasted for longer durations. In either case, the continuous emission changes in both emissions and performance varied in size depending on the test scenario being run, but the cycle average changes in emissions and performance showed little impact overall compared to the engine’s baseline operation. As a result, the inclusion of a CCV shows a decrease in baseline carbon dioxide equivalent (CO2-eq.) engine emissions (from combined exhaust and open crankcase) of almost 4%. Likewise, the CCV inclusion reduced baseline total methane (CH4) from combined exhaust and open crankcase by upwards of 16%. These atmospheric emissions only decreased further with the inclusions of collected PC and compressor vent flows. The resulting changes in time-averaged rated exhaust behavior (or lack thereof) prove that the proposed M2 system could likely be deployed at sites with modern lean-burn natural gas engines as a viable option for reducing and eliminating potential GHG sources that would have otherwise been unutilized as energy sources.

03 NATURAL GAS↗
NASA NTRS2001

Design of Fiber Optic Sensors for Measuring Hydrodynamic Parameters

The science of optical hydrodynamics involves relating the optical properties to the fluid dynamic properties of a hydrodynamic system. Fiber-optic sensors are being designed for measuring the hydrodynamic parameters of various systems. As a flowing fluid makes an encounter with a flat surface, it forms a boundary layer near this surface. The region between the boundary layer and the flat plate contains information about parameters such as viscosity, compressibility, pressure, density, and velocity. An analytical model has been developed for examining the hydrodynamic parameters near the surface of a fiber-optic sensor. An analysis of the conservation of momentum, the continuity equation and the Navier-Stokes equation for compressible flow were used to develop expressions for the velocity and the density as a function of the distance along the flow and above the surface. When examining the flow near the surface, these expressions are used to estimate the sensitivity required to perform direct optical measurements and to derive the shear force for indirect optical measurements. The derivation of this result permits the incorporation of better design parameters for other fiber-based sensors. Future work includes analyzing the optical parametric designs of fiber-optic sensors, modeling sensors to utilize the parameters for hydrodynamics and applying different mixtures of hydrodynamic flow. Finally, the fabrication of fiber-optic sensors for hydrodynamic flow applications of the type described in this presentation could enhance aerospace, submarine, and medical technology.

Lyons, Donald R.↗
NASA NTRS1988

Inlet starting predictions for sidewall-compression scramjet inlets

While inlet capture, total pressure recovery, and compression are important performance parameters in the design of scramjet inlets, the inlet must be capable of starting. An analytical, inviscid method has been developed that provides first order starting information for sidewall-compression scramjet inlets and trends have been established for some of the parameters that affect inlet starting. These parameters include sidewall contraction ratio, cowl position, Mach number, sweep angle, fuel injection struts, and sidewall and strut compression angles. Results from the parametric study are compared with data from both no-strut and two-strut inlet models.

Trexler, Carl A.↗
DOE OSTI2024

Development of a near-isothermal transcritical CO 2 compression system with a liquid piston compressor

Compressors are critical components in vapor compression cycle systems, significantly contributing to energy consumption. As global demand for HVAC&R systems rises, enhancing compressor efficiency becomes increasingly vital. This paper introduces a novel liquid piston compressor integrated with a gas cooler for the transcritical CO 2 refrigeration cycle. The liquid piston enables CO 2 refrigerant compression within various types of heat exchangers, facilitating the transfer of compression heat to the heat transfer fluid. By releasing significant heat, this compressor allows for removing or downsizing the traditional gas cooler in the refrigeration system. This paper presents the experimental performance of the first near-isothermal compressor utilizing a liquid piston in a vapor compression cycle. The critical parameters affecting heat transfer are analyzed by using a 1-D simulation model to achieve a near-isothermal compression process. The results show that the developed prototype successfully reduced the compression temperature increase from 95 K to 10 K, achieving 90 % isothermal efficiency. Furthermore, the 1-D simulation results suggest the smaller internal diameter tubes benefit the isothermal efficiency the most.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1979

A concept for dynamic control of RPV information system parameters

A globally adaptive image compression structure has been developed for use in the tactical environment of a remotely piloted vehicle. The control structure is based on an image compression algorithm RM2 but can be easily extended to standard algorithms. It is shown that this structure provides an operator with the flexibility to dynamically maximize the usefulness of a limited and changing bit rate and should significantly improve overall system performance in tactical environments.

Rice, R. F.↗
NASA NTRS1972

Minimum weight design of ring and stringer stiffeners for axially compressed cylindrical shells with and without internal pressure

Results of analytical study to determine desirable ring and stringer stiffener parameters and proportions for axially compressed stiffened isotropic cylinders with and without internal pressure are presented. This investigation examines the panel and general instability buckling modes of a stiffened cylindrical shell and from this determines desirable stiffener parameters and proportions. Classical buckling equations are used which retain the important effects of the stiffeners. The results determined by using the simpler classical buckling equations are then spot checked and verified using buckling equations which considered discrete ring stiffeners and nonlinear prebuckling deformations. For both rings and stringers, T-shaped stiffeners are preferable and the effects to stiffener shape are much more pronounced at low or zero values of the internal pressure parameter. Simple analytical expressions are developed and presented which express the stiffener area parameter, the ratio of stiffener area and elastics to shell wall area and elastic modulus, in terms of the cylinder geometry and internal pressure parameter.

Block, D. L.↗
NASA NTRS1993

Active stabilization to prevent surge in centrifugal compression systems

This report documents an experimental and analytical study of the active stabilization of surge in a centrifugal engine. The aims of the research were to extend the operating range of a compressor as far as possible and to establish the theoretical framework for the active stabilization of surge from both an aerodynamic stability and a control theoretic perspective. In particular, much attention was paid to understanding the physical limitations of active stabilization and how they are influenced by control system design parameters. Previously developed linear models of actively stabilized compressors were extended to include such nonlinear phenomena as bounded actuation, bandwidth limits, and robustness criteria. This model was then used to systematically quantify the influence of sensor-actuator selection on system performance. Five different actuation schemes were considered along with four different sensors. Sensor-actuator choice was shown to have a profound effect on the performance of the stabilized compressor. The optimum choice was not unique, but rather shown to be a strong function of some of the non-dimensional parameters which characterize the compression system dynamics. Specifically, the utility of the concepts were shown to depend on the system compliance to inertia ratio ('B' parameter) and the local slope of the compressor speedline. In general, the most effective arrangements are ones in which the actuator is most closely coupled to the compressor, such as a close-coupled bleed valve inlet jet, rather than elsewhere in the flow train, such as a fuel flow modulator. The analytical model was used to explore the influence of control system bandwidth on control effectiveness. The relevant reference frequency was shown to be the compression system's Helmholtz frequency rather than the surge frequency. The analysis shows that control bandwidths of three to ten times the Helmholtz frequency are required for larger increases in the compressor flow range. This has important implications for implementation in gas turbine engines since the Helmholtz frequencies can be over 100 Hz, making actuator design extremely challenging.

Epstein, Alan H.↗
NASA NTRS1981

Compression testing of graphite/epoxy composite materials

Three methods for compression testing coupons of filament-reinforced polymer-matrix composite materials are evaluated, to identify the sensitivity of the test techniques to laminate, specimen, and test parameters. A 'wedge-grip' compression fixture, a face-supported compression fixture, and an end-loaded coupon fixture are described. Specimens of 12.5-, 25-, and 50-mm widths, 8-, 16-, and 24-ply thicknesses, and of various fiber orientations were used to test the 'wedge-grip' compression fixture and the face-supported fixture; the end-loaded coupon fixture was tested using 16-ply specimens. Compressive strain-stress, strength, and modulus data obtained with the fixtures and evaluations showing the effects of all the test parameters are presented. One of the conclusions asserts that the 'wedge-grip' compression fixture provides good stress-strain data to failure for unidirectional and quasi-isotropic laminates.

Clark, R. K.↗
NASA NTRS1976

Sources of lunar limb compressions - Topographic correlations

Apollo 15 and 16 subsatellite observations of lunar limb compressions in the solar wind have been studied statistically by correlating occurrence rates for the compressions with seven topographic parameters derived from Apollo laser altimetry, with the use of a 5-deg x 5-deg selenographic grid. Maximum, rms, and average sunset-facing slopes are significantly correlated with occurrence rates in the source regions, but no correlation with elevation differences is found. Variance percentages suggest that a slope-related source mechanism generates about 6-8% of the limb compressions originating in source areas covered by the laser altimetry. These results confirm the preliminary conclusions of an earlier statistical study, based on Explorer 35 limb-compression observations, which used a coarser 15-deg x 15-deg grid

Srnka, L. J.↗
DOE OSTI2024

Modulated Thermomechanical Analysis of Compression-Molded High-Density Polyethylene

Thermomechanical analysis (TMA) experiments conducted on high-density polyethylene (HDPE) show both reversible and irreversible dimensional changes. To further explore these reversible and irreversible processes, modulated thermomechanical analysis (MTMA) was used. Before reliable data on compression-molded HDPE was collected, a parameter optimization was performed to obtain a suitable MTMA method. Once a suitable method was obtained, several MTMA experiments were conducted on compression-molded HDPE. This work highlights the steps taken during the MTMA parameter optimization and the results obtained from MTMA experiments conducted on pristine compression-molded HDPE samples.

36 MATERIALS SCIENCE↗
NASA NTRS1975

Residual thermal stresses in a solid sphere cast from a thermosetting material

Expressions are developed for the residual thermal stresses in a solid sphere cast from a chemically hardening thermosetting material in a rigid spherical mold. The description of the heat generation rate and temperature variation is derived from a first-order chemical reaction. Solidification is described by the continuous transformation of the material from an inviscid liquidlike state into an elastic solid, with intermediate properties determined by the degree of chemical reaction. Residual stress components are obtained as functions of the parameters of the hardening process and the properties of the hardening material. Variation of the residual stresses with a nondimensionalized reaction rate parameter and the relative compressibility of the hardened material is discussed in detail.

Levitsky, M.↗
NASA NTRS1985

A Leaky Waveguide Model for MHD Wave Driven Winds from Coronal Holes

Magnetohydrodynamic (MHD) waves, driven by the large scale convective motions of the photosphere are suggested as a possible source of additional acceleration for the stellar wind. Most of the turbulent power in a coronal hole is carried by MHD waves with periods of a few hundred seconds or longer. This is evident from direct observations of turbulence in the solar photosphere, as well as in situ observations of turbulence in the solar wind. But waves with periods this long have wavelengths which are typically as large as the transverse scale of the coronal hole flux tube itself. For these waves boundary effects are important and the coronal hole must be treated as a waveguide. The propagation of MHD waves using this waveguide approach is discussed. The simple model presented demonstrates that coronal holes can act as waveguides for MHD waves. For typical solar parameters the waves are compressible and can generate a wave tensile force which tends to cancel at least part of the wave pressure force. This effect tends to decrease the efficiency of MHD wave acceleration.

Davila, J. M.↗
NASA NTRS1988

Spatial stability of a compressible mixing layer

Presented are the results of a study of the inviscid spatial stability of a parallel compressible mixing layer. The parameters of this study are the Mach number of the moving stream, the ratio of the temperature of the stationary stream to that of the moving stream, the frequency and the direction of propagation of the disturbance wave. Stability characteristics of the flow as a function of these parameters are given. It is shown that if the Mach number exceeds a critical value there are always two groups of unstable waves. One of these groups is fast with phase speeds greater than 1/2, and the other is slow with speeds less than 1/2. Phase speeds for the neutral and unstable modes are given, as well as growth rates for the unstable modes. It is shown that three dimensional modes have the same general behavior as the two dimensional modes but with higher growth rates over some range of propagation direction. Finally, a group of very low frequency unstable modes was found for sufficiently large Mach numbers. These modes have very low phase speeds but large growth rates.

Jackson, T. L.↗
NASA NTRS1989

Inviscid spatial stability of a compressible mixing layer

Presented are the results of a study of the inviscid spatial stability of a parallel compressible mixing layer. The parameters of this study are the Mach number of the moving stream, the ratio of the temperature of the stationary stream to that of the moving stream, the frequency and the direction of propagation of the disturbance wave. Stability characteristics of the flow as a function of these parameters are given. It is shown that if the Mach number exceeds a critical value there are always two groups of unstable waves. One of these groups is fast with phase speeds greater than 1/2, and the other is slow with speeds less than 1/2. Phase speeds for the neutral and unstable modes are given, as well as growth rates for the unstable modes. It is shown that three-dimensional modes have the same general behavior as the two-dimensional modes but with higher growth rates over some range of propagation direction. Finally, a group of very low frequency unstable modes was found for sufficiently large Mach numbers. These modes have very low phase speeds but large growth rates.

Jackson, T. L.↗
NASA NTRS1992

Stability and bifurcation of quasiparallel Alfven solitons

The inverse scattering transformation (IST) is used to study the one-parameter and two-parameter soliton families of the derivative nonlinear Schroedinger (DNLS) equation. The two-parameter soliton family is determined by the discrete complex eigenvalue spectrum of the Kaup-Newell scattering problem and the one-parameter soliton family corresponds to the discrete real eigenvalue spectrum. The structure of the IST is exploited to discuss the existence of discrete real eigenvalues and to prove their structural stability to perturbations of the initial conditions. Also, though the two-parameter soliton is structurally stable in general, it is shown that a perturbation of the initial conditions may change the two-parameter soliton into a degenerate soliton which, in turn, is structurally unstable. This degenerate, or double pole, soliton may bifurcate due to a perturbation of the initial conditions into a pair of one-parameter solitons. If the initial profile is on compact support, then this pair of one-parameter solitons must be compressive and rarefactive respectively. Finally, the Gelfand-Levitan equations appropriate for the double pole soliton are solved.

Hamilton, R. L.↗