SEARCH · Search NASA

Results for “parametric”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Parametrically amplified Josephson plasma waves in YBa 2 Cu 3 O 6+ x : Evidence for local superconducting fluctuations up to the pseudogap temperature T ∗

Experiments that subject underdoped YBa 2 Cu 3 O 6+x (YBCO) to intense terahertz pulses at temperatures between the transition temperature T c and the pseudogap scale T ∗ have revealed a reflectivity edge that resembles that of the superconducting state, together with second harmonic generation of a probe pulse modulated at a similar frequency. These have been interpreted in terms of parametric amplification of the lower Josephson plasmon mode. Since this mode is often associated with coherent oscillations between bilayers in the YBCO structure, these experiments have led to the suggestion that the intense pump has created (or revealed) in-plane pair coherence up to T ∗ ≈ 400 K. In this paper we propose an alternative explanation by assuming the existence of local pair amplitude and phase at equilibrium for T c < T < T ∗ . The phase correlation spans only a few lattice constants and we do not assume any pump-induced enhancement of this correlation, either in-plane or between bilayers. Instead, the coherent drive, via a parametric amplification process, induces coherence in the Josephson currents between members of bilayers. When combined with a Floquet framework, the reflectivity data can be explained. The key point is that in the lower Josephson plasmon, the coupling between bilayers is mainly capacitive; the Josephson current between bilayers can be set to zero without strongly affecting the parametric amplification process. Importantly, while superconducting coherence may not be created by the pump, the pseudogap phase must possess a local pairing amplitude at equilibrium. Consequently, these experiments have strong implications for the understanding of the pseudogap phase.

parametric amplification↗

DOE OSTI2026

Parametric amplification of spin-motion coupling in three-dimensional trapped-ion crystals

Three-dimensional (3D) crystals offer a route to scaling up trapped-ion systems for quantum sensing and quantum simulation applications; however, engineering coherent spin-motion couplings and effective spin-spin interactions in large crystals poses technical challenges associated with decoherence and prolonged timescales to generate appreciable entanglement. Here, we explore the possibility of speeding up these interactions in 3D crystals via parametric amplification. For this purpose, we derive a general Hamiltonian for the parametric amplification of spin-motion coupling that is broadly applicable to normal modes with motion transverse to or along the spatial extent of the crystal. Unlike in lower-dimensional crystals, we find that the ability to faithfully (uniformly) amplify the spin-spin interactions in 3D crystals depends on the physical implementation of the spin-motion coupling. We consider the light-shift gate, and the so-called phase-insensitive and phase-sensitive Mølmer-Sørensen (MS) gates, and we find that only the phase-sensitive MS gate can be faithfully amplified in general 3D crystals. We discuss a situation where nonuniform amplification can be advantageous. We also reconsider the effect of counter-rotating terms on parametric amplification and find that they are not as detrimental as previous studies suggest.

Optical parametric oscillators & amplifiers↗

DOE OSTI2021

Enhancement of Parametric Effects in Polariton Waveguides Induced by Dipolar Interactions

Exciton-polaritons are hybrid light-matter excitations arising from the nonperturbative coupling of a photonic mode and an excitonic resonance. Behaving as interacting photons, they show optical third-order nonlinearities providing effects such as optical parametric oscillation or amplification. It has been suggested that polariton-polariton interactions can be greatly enhanced by inducing aligned electric dipoles in their excitonic part. However, direct evidence of a true particle-particle interaction, such as superfluidity or parametric scattering, is still missing. In this Letter, we demonstrate that dipolar interactions can be used to enhance parametric effects such as self-phase modulation in waveguide polaritons. By quantifying these optical nonlinearities, we provide a reliable experimental measurement of the direct dipolar enhancement of polariton-polariton interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2026

Hybrid Symbolic-Numerical Modeling and Parametric Stability Analysis of DC–AC Power Systems

Hybrid DC-AC power systems integrating diverse inverter-based resources (IBRs) and multi-terminal high-voltage direct current (MTDC) networks represent a promising architecture for future power grids, while introducing challenges for modeling, stability analysis, and control design. This paper develops a hybrid symbolic-numerical modeling framework and tool to characterize the parametric small-signal stability of DC-AC coupled power systems. The proposed approach constructs parametric state-space models to enable efficient representation of system dynamics under varying control parameters and network configurations, with target parameters retained as symbolic variables and the remainder treated numerically. The stability analysis framework covers eigenvalue, sensitivity, and stability boundary and region characterization. Enhanced linear matrix inequality (LMI) techniques are proposed to directly certify small-signal stability over regions of parameter space while also reducing the conservativeness and computational burden. The resulting tools and frameworks enable rapid parametric model construction across diverse grid conditions, thereby facilitating stability-informed control and operation in complex DC–AC power systems.

DC–AC power systems↗

DOE OSTI2020

Affine Approximation of Parametrized Kernels and Model Order Reduction for Nonlocal and Fractional Laplace Models

In this work, we consider parametrized problems driven by spatially nonlocal integral operators with parameter-dependent kernels. In particular, kernels with varying nonlocal interaction radius $\delta > 0$ and fractional Laplace kernels, parametrized by the fractional power $s\in(0,1)$, are studied. Furthermore, in order to provide an efficient and reliable approximation of the solution for different values of the parameters, we develop the reduced basis method as a parametric model order reduction approach. Major difficulties arise since the kernels are not affine in the parameters, singular, and discontinuous. Moreover, the spatial regularity of the solutions depends on the varying fractional power $s$. To address this, we derive regularity and differentiability results with respect to $\delta$ and $s$, which are of independent interest for other applications such as optimization and parameter identification. We then use these results to construct affine approximations of the kernels by local polynomials. Finally, we certify the method by providing reliable a posteriori error estimators, which account for all approximation errors, and support the theoretical findings by numerical experiments.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2020

Parametric Study to Assess Technical Prospect Feasibility for Offshore CO 2 Storage

This report is a white paper on the parametric study to assess technical prospect feasibility for CO 2 storage with and without CO 2 -EOR. The SECARB Offshore GOM team reviewed key parameters that previous modeling experience suggests have the largest impact on CO 2 plume size and CO 2 -EOR performance (SSEB, 2019) These parameters include tectonic impacts (reservoir dip and fault block size), reservoir properties (permeability) and development strategies (well field payout, waterflood, and CO 2 flooding strategies). These parameters are further evaluated in this study in order to identify upper and lower boundary conditions for the parametric values. The boundary conditions are needed to set constraints for key parameters when performing modeling assessments. Understanding the key parametric values for the GOM will facilitate locating successful offshore carbon capture utilization and storage (CCUS) projects in terms of plume size, CO 2 stored and, in the case of EOR, oil recovery. Importantly, this white paper focuses on both technical factors (geologic and engineering), but does not address economic, commercial, or stakeholder considerations. The report is organized into four sections and includes a review of the datasets used to define the parameter ranges, the results of a full-physics reservoir simulation, a summary of a reduced order modeling approach to evaluate the impact of the study parameters, and, finally, a discussion of the work that will occur during the next phase of the project.

02 PETROLEUM↗

DOE OSTI2021

Parametrizations of the spin density matrix

Highlights: • Proposed two methods for parametrizing the SDM of spinning, unstable particles. • All non-negativity conditions fulfilled; adaptability to various constraints. • First method: based on a theorem; applicable in a simple and flexible way. • Second method: particularly suitable for especial conditions. • Applications: two of them interesting in the search for new physics. We propose for the spin density matrix two parametrizations which automatically fulfill the non-negativity conditions, without setting any bound on the parameters. The first one relies on a theorem, that we prove, and it is rather simple and easily adaptable to some specific reactions, where, for example, parity is conserved or angular momentum conservation entails selection rules. Moreover, in the case when the rank is less than the order of the density matrix, we show how to improve the fits to the data, either by implementing previous suggestions, or by elaborating an alternative method, for which we prove a second theorem. Our second parametrization is a variant of previous treatments, it appears suitable for some particular processes. Moreover, we discuss about the possibility of inferring the elements of the density matrix from the differential decay width. Last, we illustrate various examples of current interest, both in strong and weak decays; some of them may be helpful in the investigation of physics beyond the standard model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2023

A parametric finite element study for determining burst strength of thin and thick-walled pressure vessels

To accurately predict the burst strength of both thin and thick-walled pressure vessels (PVs), a parametric study of PV burst strength was performed for a wide range of vessel geometries and materials using elastic-plastic finite element analysis (FEA). A valid FEA model was established through a detailed study of 2D versus 3D FEA models, the critical stress failure criterion versus the limit load criteria, and the thick-wall effect on the FEA simulations. Here, the results show that the stresses and strains at the mean diameter, rather than outside diameter, determines a more accurate burst strength for both thin and thick-walled PVs. On this basis, a parametrized FEA script using the ABAQUS Python application programming interface (API) was used to create a large database of PV burst strengths for a variety of vessel geometries and materials, demonstrating that Python scripting is a powerful technique for performing parametric studies or generating large databases. From the FEA results, using the regression method, a new burst pressure model was developed as a function of the vessel geometry (D/t ratio) and material properties (UTS and n). As validated by a large number of full-scale burst test data, the proposed burst model can very accurately predict the burst strength for both thin and thick-walled PVs.

42 ENGINEERING↗

DOE OSTI2025

Direct local parametrization of nuclear state densities using the back-shifted Bethe formula

Level densities are often parametrized using the back-shifted Bethe formula (BBF) for nuclei that possess experimental data for s-wave neutron resonance average spacings and a complete discrete level sequence at low excitation energies. However, these parametrizations require the additional modeling of the dependence of the spin-cutoff parameter on excitation energy. Here, in this work, we avoid the need to model the spin distribution of level densities by using the experimental data to parametrize directly the state densities, for which the BBF does not depend on the spin-cutoff parameter. This approach allows for a local parameterization of state densities that is independent of the spin-cutoff parameter. We provide these parameters in a tabulated form for applications in nuclear reaction calculations and for testing microscopic approaches to state densities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2026

Contrasting Parametric Sensitivities in Two Global Vegetation Models Using Parameter Perturbation Ensembles

Uncertainty in land model projections remains high and the roles of parametric and structural uncertainty are difficult to disentangle. To compare parametric sensitivity across model structures we present two parameter perturbation ensembles using the Community Land Model (CLM) operating in satellite phenology mode. The ensembles contrast two vegetation modules: (a) the default CLM vegetation module and (b) the Functionally Assembled Terrestrial Ecosystem Simulator (CLM-FATES). We perturbed over 300 parameters and quantified their effects on biophysical fluxes globally and across biomes. Most parameters have minimal impact on biophysical fluxes, with only a few substantially influencing results. While both models exhibit similar parameter sensitivity for some fluxes, CLM-FATES shows larger spread in gross primary productivity (GPP), driven by strong sensitivity to carboxylation rate. CLM-FATES also shows a weaker GPP response to soil hydrology parameters and exhibits higher water use efficiency (WUE). Cross-model comparisons reveal similar sensitivities for some parameters (e.g., leaf dimension) but divergent responses to others (e.g., stomatal intercept), highlighting underlying structural differences. Differences in WUE and sensitivity to hydrology and stomatal conductance parameters underscore how model structure fundamentally alters parametric sensitivity. The data sets generated from these ensembles can be used to identify influential parameters and guide future calibration efforts.

Foster, A. C. [NSF National Center for Atmospheric↗

DOE OSTI2024

A parametrically programmable delay line for microwave photons

Delay lines that store quantum information are crucial for advancing quantum repeaters and hardware efficient quantum computers. Traditionally, they are realized as extended systems that support wave propagation but provide limited control over the propagating fields. Here, we introduce a parametrically addressed delay line for microwave photons that provides a high level of control over the stored pulses. By parametrically driving a three-wave mixing circuit element that is weakly hybridized with an ensemble of resonators, we engineer a spectral response that simulates that of a physical delay line, while providing fast control over the delay line’s properties. We demonstrate this novel degree of control by choosing which photon echo to emit, translating pulses in time, and even swapping two pulses, all with pulse energies on the order of a single photon. We also measure the noise added from our parametric interactions and find it is much less than one photon.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2025

Multi-modality deep learning for pulse prediction in homogeneous nonlinear systems via parametric conversion

In this Letter, we introduce FusionNet, a multi-modality deep learning framework designed to predict and analyze output pulses in high-power rare-earth-doped laser systems driving parametric conversion in homogeneous guided nonlinear media. FusionNet integrates temporal, spectral, and physical experimental conditions to model ultrafast nonlinear phenomena, including parametric nonlinear frequency conversion, self-phase modulation, and cross-phase modulation in homogeneous guided systems such as gas-filled hollow-core fibers. These systems bridge physical models with experimental data, advancing our understanding of light-guiding principles and nonlinear interactions while expediting the design and optimization of on-demand high-power, high-brightness systems. Our results demonstrate a 73% reduction in prediction error and an 83% improvement in computational efficiency compared to conventional neural networks. This work establishes a new paradigm for accelerating parametric simulations and optimizing experimental designs in high-power laser systems, with further implications for high-precision spectroscopy, quantum information science, and distributed entangled interconnects.

47 OTHER INSTRUMENTATION↗

DOE OSTI2022

A fully Lagrangian, non-parametric bias model for dark matter halos

Here, we present a non-parametric Lagrangian biasing model and fit the ratio of the halo and mass densities at the field level using the mass-weighted halo field in the AbacusSummit simulations at z=0.5. Unlike the perturbative halo bias model that has been widely used in interpreting the observed large-scale structure traced by galaxies, we find a non-negative halo-to-mass ratio that increases monotonically with the linear overdensity δ 1 in the initial Lagrangian space. The bias expansion, however, does not guarantee non-negativity of the halo counts, and may lead to rising halo number counts at negative overdensities. The shape of the halo-to-mass ratio is unlikely to be described by a polynomial function of δ 1 and other quantities. Especially for massive halos with 6×10 12 h -1 M ⊙ , the halo-to-mass ratio starts soaring up at δ 1 >0, substantially different from the predictions of the bias expansion. We show that for the halo masses we consider (M>3×10 11 h -1 M ⊙ ) a non-parametric halo-to-mass ratio as a function of δ 1 and its local derivative ∇^2δ 1 can recover the halo power spectra to sub-percent level accuracy for wavenumbers k=0.01-0.1 h Mpc -1 given a proper smoothing scale to filter the initial density field, even though we do not fit the power spectrum directly. However, there is mild dependence of the recovery of the halo power spectrum on the smoothing scale and other input parameters. At k<0.01 h Mpc -1 and for massive halos with M>6x10 12 h -1 M ⊙ , our non-parametric model leads to a few percent overestimation of the halo power spectrum, indicating the need for larger or multiple smoothing scales. The halo-to-mass ratios obtained qualitatively agree with intuitions from extended Press-Schechter theory. We compare our framework to the bias expansion and discuss possible extensions.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Exploring modified gravity: constraints on the μ and Σ parametrization with WMAP , ACT, and SPT

ABSTRACT The cosmic acceleration problem remains one of the most significant challenges in cosmology. One of the proposed solutions to this problem is the modification of gravity on large scales. In this paper, we explore the well-known μ–Σ parametrization scenarios and confront them with observational data, including the cosmic microwave background (CMB) radiation from the Wilkinson Microwave Anisotropy Probe (WMAP), Atacama Cosmology Telescope (ACT), and South Pole Telescope (SPT), as well as large-scale structure data from the Sloan Digital Sky Survey (SDSS; baryon acoustic oscillation + redshift-space distortion) and Pantheon supernova (SN) catalogue. We employ a Bayesian framework to constrain the model parameters and discuss the implications of our results on the viability of modified gravity theories. Our analysis reveals the strengths and limitations of the μ–Σ parametrization and provides valuable insights into the nature of gravity on cosmological scales. From the joint analysis of the ACT + WMAP + SDSS + SN, we find μ0 − 1 = 0.02 ± 0.19 and Σ0 − 1 = 0.021 ± 0.068 at 68 per cent confidence level (CL). In light of the SPT + WMAP + SDSS + SN, we find μ0 − 1 = 0.07 ± 0.18 and $\Sigma _0 -1 = -0.009^{+0.078}_{-0.11}$ at 68 per cent CL. In all the analyses carried out, we do not find any deviations from the theory of general relativity. Our results represent an observational update on the well-known μ–Σ parametrization in view of current CMB data, independent of and competitive with the constraints obtained with the Planck data.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

Toward improved quantum simulations and sensing with trapped two-dimensional ion crystals via parametric amplification

Improving coherence is a fundamental challenge in quantum simulation and sensing experiments with trapped ions. Here we discuss, experimentally demonstrate, and estimate the potential impacts of two different protocols that enhance, through motional parametric excitation, the coherent spin-motion coupling of ions obtained with a spin-dependent force. The experiments are performed on two-dimensional crystal arrays of approximately 100 9 ⁢Be + ions confined in a Penning trap. By modulating the trapping potential at close to twice the center-of-mass mode frequency, we squeeze the motional mode and enhance the spin-motion coupling while maintaining spin coherence. With a stroboscopic protocol, we measure 5.4 ± 0.9 dB of motional squeezing below the ground-state motion, from which theory predicts a 10-dB enhancement in the sensitivity for measuring small displacements using a recently demonstrated protocol [K. A. Gilmore et al., Science 373, 673 (2021)]. With a continuous squeezing protocol, we measure and accurately calibrate the parametric coupling strength. Theory suggests this protocol can be used to improve quantum spin squeezing, limited in our system by off-resonant light scatter. Finally, we illustrate numerically the trade-offs between strong parametric amplification and motional dephasing in the form of center-of-mass frequency fluctuations for improving quantum spin squeezing in our setup.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2021

Shadow poles in the alternative parametrization of R-matrix theory

In this work, we discover new, hitherto unknown, shadow poles in Brune’s alternative parametrization of R-matrix theory [C. R. Brune, Phys. Rev. C 66, 044611 (2002)]. Where these poles are, and how many, depends on how one continues R-matrix operators to complex wavenumbers (specially the shift S and penetration P functions). This has little consequence for the exact R-matrix formalism (past the last energy threshold), as we show one can still always fully reconstruct the scattering matrix with only the previously known alternative parameters (poles and corresponding resonance widths), for which there were as many poles as the number of levels Nλ. However, we generalize the alternative parametrization to the Reich-Moore formalism, and show that the choice of continuation is now critical as it changes the alternative parameters values (poles and residue widths are now complex). In order to establish nuclear libraries with alternative parameters, the nuclear community will thus have to decide what convention to adopt. We argue in favor of analytical continuation (against the legacy Lane and Thomas approach) in a follow-up article [P. Ducru, Phys. Rev. C, submitted (2020)]. We observe the first evidence of shadow poles in the alternative parametrization of R-matrix theory in isotope xenon 134 Xe spin-parity group J π = 1=2 (–) , and show how they indeed depend on the choice of continuation to complex wavenumbers.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

String-based parametrization of nucleon GPDs at any skewness: A comparison to lattice QCD

We introduce a string-based parametrization for nucleon quark and gluon generalized parton distributions (GPDs) valid at all skewness values. The conformal moments of the GPDs are expressed as sums of the spin-j nucleon A-form factor and the skewness-dependent spin-j nucleon D-form factor. This representation, which fulfills the polynomiality condition (due to Lorentz invariance) and does not rely on model-specific assumptions, is derived from t-channel string exchanges in anti-de Sitter spaces. The spin-j nucleon D-form factor is closely related to the spin-j nucleon A-form factor. We use the Mellin moments from empirical parton distributions to model the spin-j nucleon A-form factors. Using only five Regge slope parameters, fixed from the electromagnetic and gravitational form factors, our string-based parametrization generates accurate singlet, nonsinglet, isovector, and flavor-separated nucleon quark GPDs, along with symmetric nucleon gluon GPDs from their Mellin-Barnes integral representations. Our isovector nucleon quark GPD is in agreement with existing lattice data. Our string-based parametrization should facilitate the empirical extraction and global analysis of nucleon GPDs in exclusive processes, bypassing the deconvolution challenge.

Electron-ion collisions↗

DOE OSTI2022

Large-scale parametric modeling of spent nuclear fuel dynamics in the 30 cm package drop scenario

Packages used to transport spent nuclear fuel (SNF) are required by the U.S. Code of Federal Regulations 10 CFR 71.71 to demonstrate satisfactory performance during a drop scenario. While the CFR is meant to ensure safe package function, it does not evaluate survival of the SNF within. The U.S. Department of Energy Spent Fuel and Waste Science and Technology program is working on closing the knowledge gap related to the response of SNF to external mechanical loads, including the hypothetical 30 cm package drop scenario in the CFR. In support of this effort, LS-DYNA finite element simulations were developed by Pacific Northwest National Laboratory (PNNL) to model generic drop scenarios at both the package and fuel assembly level. The models were validated against one-third scale package and full scale fuel assembly drop test data and were exercised to predict fuel cladding strains in a narrow range of model configurations. This work describes a large-scale parametric study conducted by PNNL using the previously developed and validated PWR finite element model, with the addition of a new generic BWR assembly model. The motivation for the parametric study was to characterize the broad range of SNF responses in the 30 cm package drop scenario. This was accomplished by varying the drop orientation, fuel assembly type (17x17 PWR and 10x10 BWR), burnup, cladding temperature, spacer grid buckling load, package mass, impact limiter stiffness, and mechanical gap conditions within the basket. A MATLAB framework was developed to automate LS-DYNA model generation and execution on PNNL institutional computing resources. In total, over 2000 simulations were performed. For each simulation, the SNF response was quantified in terms of permanent grid deformation, fuel rod contact pressure, and strains within the fuel rods, guide tubes, and water rods. The results provide valuable insight into the range of responses that could be reasonably expected from SNF in the hypothetical drop scenario, as well as the sensitivity to each input parameter. The results of this parametric study are a key component of the testing and modeling strategy the Spent Fuel and Waste Science and Technology program is using to close the external loads knowledge gap.

Kadooka, Kevin↗