Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A Monte Carlo Approach to Approximating the Effects of Pore Geometry on the Phase Behavior of Soil Freezing

Abstract Freezing in porous media is associated with a host of dynamic phenomena that stem from the presence and mobility of premelted liquid at subzero temperatures. Accurate assessments of the progressive liquid‐ice phase transition is required for predictive models of frost damage, glacier‐till coupling, and many other cold regions processes, as well as for evaluating the capacity for water storage in near‐surface extraterrestrial environments. We use a Monte Carlo approach to sample the pore space in a synthetic 3D packing of poly‐dispersed spherical particles and evaluate local geometrical constraints that allow us to assess changes in the relative proportions of pore fluid and ice. By approximating the phase boundary geometry in fine‐grained pores while considering both the curvature of the liquid‐ice interface and wetting interactions with matrix particles, our model predicts changes in phase equilibrium in granular media over a broad temperature range, where present accounting for the colligative effects of chloride and perchlorate solutes. In addition to formulating the constitutive behavior needed to better understand properties and processes in frozen soils, our results also provide insight into other aspects of phase equilibria in porous media, including the formation of methane hydrates in permafrost and marine sediments, and the partitioning between liquid water and vapor in the vadose zone.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Tracking Active Phase Behavior on Boron Nitride during the Oxidative Dehydrogenation of Propane Using Operando X-ray Raman Spectroscopy

Hexagonal boron nitride (hBN) is a highly selective catalyst for the oxidative dehydrogenation of propane (ODHP) to propylene. Using a variety of ex situ characterization techniques, the activity of the catalyst has been attributed to the formation of an amorphous boron oxyhydroxide surface layer. The ODHP reaction mechanism proceeds via a combination of surface mediated and gas phase propagated radical reactions with the relative importance of both depending on the surface-to-void-volume ratio. Here we demonstrate the unique capability of operando X-ray Raman spectroscopy (XRS) to investigate the oxyfunctionalization of the catalyst under reaction conditions (1 mm outer diameter reactor, 500 to 550 °C, P = 30 kPa C 3 H 8 , 15 kPa O 2 , 56 kPa He). We probe the effect of a water cofeed on the surface of the activated catalyst and find that water removes boron oxyhydroxide from the surface, resulting in a lower reaction rate when the surface reaction dominates and an enhanced reaction rate when the gas phase contribution dominates. Computational description of the surface transformations at an atomic-level combined with high precision XRS spectra simulations with the OCEAN code rationalize the experimental observations. Finally, this work establishes XRS as a powerful technique for the investigation of light element-containing catalysts under working conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Photophysical Properties and Phase Behavior of Ultrawide Photovoltaic Bandgap Cesium–Lead-Based Triple Halide Perovskites

Metal halide perovskite films in the top cell of triple-junction tandems require bandgaps around 2.0 eV to achieve current matching, assuming that the middle absorbing layer is the commonly used FAPbI 3 composition and the bottom cell has a bandgap around 1.1 eV. Unfortunately, mixed organic/inorganic metal halide perovskites that have the necessary Br content to reach a bandgap of 2.0 eV segregate into iodine-rich and bromine-rich phases under illumination, limiting their obtainable voltage. Previous reports have shown improved photostability using either Cs-based inorganic compositions or Cl incorporation on the X-site. Here, we investigate the inorganic triple halide compositional space CsPb­(I 1–x–y Br y Cl x ) 3 where bandgaps near 2.0 eV are expected based on the knowledge that CsPbI2Br has a bandgap of 1.90 eV. Incorporation of Cl occurs readily for x ≤ 0.07–0.10 within perovskites with a Br content of 0.3 ≤ y ≤ 0.42. When x >0.1, X-ray diffraction and photoluminescence (PL) measurements indicate that multiple compositional phases form. We hypothesize that the variable sizes of the three halide ions are not supported within the rigid Cs lattice, resulting in the formation of multiple compositional phases. The photoluminescence quantum yield of the single-phase compositional space–CsPb­(I 1–x–y Br y Cl x ) 3 where x ≤ 0.07was typically 0.001–0.004%, most likely as a result of a high defect density, including mobile iodine species. PL light-soaking measurements of many perovskite compositions with bandgaps in the range of 1.89–2.05 eV demonstrate that phase segregation occurs when initial bandgaps are above 1.95 eV regardless of halide content: indicating further iodide oxidation and corresponding migration under illumination. The conclusion is that further compositional or additive engineering is necessary for the development of inorganic triple halide compositions that accomplish the elusive goal of fabricating high-quality and photostable 2.0 eV films for use in multijunction tandems.

Electrical conductivity↗
NASA NTRS2025

Lyotropic Liquid Crystalline Phase Behavior of Boron Nitride Nanotube Aqueous Dispersions

Boron nitride nanotubes (BNNTs) are gaining significant interest due to their outstanding mechanical and thermal properties, as well as their potential to serve as a model nanorod system. Processing BNNT liquid crystalline (LC) dispersions enables precise control over BNNT orientation in macroscopic assemblies, while their low absorption in the visible spectrum facilitates studying LCs at exceptionally high concentrations. Here, we investigate the behavior of BNNTs in aqueous solutions stabilized by the surfactant sodium deoxycholate (SDC), examining the effect of BNNT purity and BNNT−SDC concentrations on lyotropic LC formation. We disperse up to 15wt% BNNT in SDC solutions and use polarized light microscopy to detail the transition from an isotropic state to a biphasic regime, where isotropic and nematic domains coexist due to phase separation, to a single fully nematic phase. Cryogenic electron microscopy provides direct evidence of BNNT alignment within nematic domains. Our results show that enhanced depletion-induced attractions, driven by increased surfactant concentration, lower the threshold concentration of BNNT required to form nematic domains. In contrast, low surfactant concentrations relative to BNNT result in insufficiently coated nanotube surfaces, leading to poor dispersions and BNNT aggregation. Additionally, we fabricate well-aligned BNNT films from aqueous LC dispersions. Our findings advance the understanding of BNNT LCs, offering insight into controlling their orientation and highlighting their potential for high-performance materials.

Joe Khoury↗
DOE OSTI2023

First-Principles-Based Machine Learning Models for Phase Behavior and Transport Properties of CO 2

In this work, we construct distinct first-principles-based machine-learning models of CO 2 , reproducing the potential energy surface of the PBE-D3, BLYP-D3, SCAN and SCAN-rvv10 approximations of density functional theory. Here we employ the Deep Potential methodology to develop the models and consequently achieve a significant computational efficiency over ab initio molecular dynamics (AIMD) that allows for larger system sizes and time scales to be explored. Although our models are trained only with liquid phase configurations, they are able to simulate a stable interfacial system and predict vapor-liquid equilibrium properties, in good agreement with results from the literature. Because of the computational efficiency of the models, we are also able to obtain transport properties, such as viscosity and diffusion coefficients. We find that the SCAN-based model presents a temperature shift in the position of the critical point, while the SCAN-rvv10-based model shows improvement but still exhibits a temperature shift that remains approximately constant for all properties investigated in this work. We find that the BLYP-D3-based model generally performs better for liquid phase and vapor-liquid equilibrium properties, but the PBE-D3-based model is better suited for predicting transport properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Phase Behavior of the Ternary NaCl-PuCl 3 -Pu Molten Salt

There is a gap in our understanding of the behavior of fused and molten fuel salts containing unavoidable contamination, such as those due to fabrication, handling, or storage. Therefore, this work used calorimetry to investigate the change in liquidus temperature of PuCl 3 , having an unknown purity and that had been in storage for several decades. Further research was performed by additions of NaCl, making several compositions within the binary system, and summarizing the resulting changes, if any, to the phase diagram. The melting temperature of the PuCl 3 was determined to be 746.5°C, approximately 20°C lower than literature reported values, most likely due to an excess of Pu metal in the PuCl 3 either due to the presence of metallic plutonium remaining from incomplete chlorination or due to the solubility of Pu in PuCl 3 . From the melting temperature, it was determined that the PuCl 3 contained between 5.9 to 6.2mol% Pu metal. Analysis of the NaCl-PuCl 3 samples showed that using the Pu rich PuCl 3 resulted in significant changes to the NaCl-PuCl 3 phase diagram. Most notably an unreported phase transition occurring at approximately 406°C and a new eutectic composition of 52.7mol% NaCl–38.7mol% PuCl 3 –2.5mol% Pu which melted at 449.3°C. Additionally, an increase in the liquidus temperatures was seen for NaCl rich compositions while lower liquidus temperatures were seen for PuCl 3 rich compositions. It can therefore be concluded that changes will occur in the NaCl-PuCl 3 binary system when using PuCl 3 with excess Pu metal. However, melting temperature analysis can provide valuable insight into the composition of the PuCl 3 and therefore the NaCl-PuCl 3 system.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Compositional heterogeneity in Cs y FA 1- y Pb(Br x I 1- x ) 3 perovskite films and its impact on phase behavior

Hybrid organic inorganic lead halide perovskite semiconductors of the form Cs y FA 1-y Pb(Br x I 1-x ) 3 are promising candidate materials for high-efficiency photovoltaics. Notably, cation and anion substitution can be used to tune the band gaps to optimize performance and improve stability. However, multi-component materials can be prone to compositional and structural inhomogeneity and the extent, length scale and impact of this heterogeneity on lead halide perovskite properties are not well understood. Here we use synchrotron X-ray diffraction to probe the evolution of crystal structure across the tetragonal-to-cubic phase transition for a series of Cs y FA 1-y Pb(Br x I 1-x ) 3 thin films with x = 0.05 to 0.3 and y = 0.17 to 0.40. We find that the transition occurs across a broad temperature range of approximately 40 °C, much larger than for pure compounds such as MAPbI 3 and MAPbBr 3 . Finally, we hypothesize that this smearing of the phase transition is due to compositional inhomogeneities that give rise to a distribution of local transition temperatures and we estimate the composition varies by about 10% to 15% with likely greater heterogeneity for the halide anion than the cation. This approach of mapping the transition is a simple and effective method of assessing heterogeneity, enabling evaluation of its impact.

36 MATERIALS SCIENCE↗
DOE OSTI2025

The Influence of Charge Correlation and Ion Solvation on the Phase Behavior of Single-Ion Conducting Polymer Blend Electrolytes Using SAXS/SANS

Single-ion conducting polymer blends (SICPBs) have demonstrated exceptional electrochemical performance as solid-state battery electrolytes; however, their nanoscale morphology and thermodynamic behavior remain unexplored. In this work, we investigate blends composed of deuterated poly(ethylene oxide) and poly[lithium sulfonyl(trifluoromethane sulfonyl)imide methacrylate], dPEO/P(LiMTFSI), and report the first experimental study of the nanostructures of charge-neutral polymer blends using small-angle neutron scattering (SANS) and small-angle X-ray scattering (SAXS). Despite the macroscopic miscibility indicated by a single glass-transition temperature, SANS and SAXS results reveal disordered, charge-correlated nanostructures that are strongly influenced by blend composition and temperature. At low concentrations of charge polymer, the scattering is dominated by concentration fluctuations, and the random phase approximation is applied to extract values of the Flory–Huggins interaction parameter, χ SC . At higher charged polymer content, concentration fluctuations are suppressed, and a correlation model is used to characterize the nanostructures of the charge correlations. We find that the structures of the charge correlations are highly dependent on blend composition─consistent with predictions from Sing’s self-consistent field theory-liquid state models. Understanding these features is essential for uncovering the ion transport mechanism that leads to improved electrochemical performance previously reported in SICPB systems.

25 ENERGY STORAGE↗
DOE OSTI2020

Dynamic Structure and Phase Behavior of a Block Copolymer Electrolyte under dc Polarization

There is an important consideration when designing lithium battery electrolytes for advanced applications is how the electrolyte facilitates ion transport at fast charge and discharge rates. Large current densities are accompanied by large salt concentration gradients across the electrolyte. Nanostructured composite electrolytes have been proposed to enable the use of high energy density lithium metal anodes, but many questions about the interplay between the electrolyte morphology and the salt concentration gradient that forms under dc polarization remain unanswered. To address these questions, we use an in situ small-angle X-ray scattering technique to examine the nanostructure of a polystyrene- block -poly(ethylene oxide) copolymer electrolyte under dc polarization with spatial and temporal resolution. In the quiescent state, the electrolyte exhibits a lamellar morphology. The passage of ionic current in a lithium symmetric cell leads to the formation of concurrent phases: a disordered morphology near the negative electrode, lamellae in the center of the cell, and coexisting lamellae and gyroid near the positive electrode. The most surprising result of this study was obtained after the applied electric field was turned off: a current-induced gyroid phase grows in volume for 6 h in spite of the absence of an obvious driving force. We show that this reflects the formation of localized pockets of salt-dense electrolyte, termed concentration hotspots, under dc polarization. Our methods may be applied to understand the dynamic structure of composite electrolytes at appreciable current densities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Elucidating the Gas-Phase Behavior of Nitazene Analog Protomers Using Structures for Lossless Ion Manipulations Ion Mobility-Orbitrap Mass Spectrometry

2-benzylbenzimidazoles, or “nitazenes”, are a class of novel synthetic opioids (NSOs) that are increasingly being detected alongside fentanyl analogs and other opioids in drug overdose cases. Nitazenes can be 20x more potent than fentanyl but are not routinely tested for during postmortem or clinical toxicology drug screens; thus, their prevalence in drug overdose cases may be under-reported. Traditional analytical workflows utilizing liquid chromatography-tandem mass spectrometry (LC-MS/MS) often require additional confirmation with authentic reference standards to identify a novel nitazene. However, additional analytical measurements with ion mobility spectrometry (IMS) may provide a path towards reference-free identification, which would greatly accelerate NSO identification rates in toxicology labs. Presented here are the first IMS and collision cross section (CCS) measurements on a set of fourteen nitazene analogs using a Structures for Lossless Ion Manipulations (SLIM)-Orbitrap MS. All nitazenes exhibited two high intensity baseline-separated IMS distributions, which fentanyls and other drug and drug-like compounds also exhibit. Incorporating water into the electrospray ionization (ESI) solution caused the intensities of the higher mobility IMS distributions to increase the intensities of the lower mobility IMS distributions to decrease. Nitazenes lacking a nitro group at the R1 position exhibited the greatest shifts in signal intensities due to water. Furthermore, IMS-MS/MS experiments showed that the higher mobility IMS distributions of all nitazenes produced fragment ions with m/z 72, 100, and other low intensity fragments while the lower mobility IMS distributions only produced fragment ions with m/z 72 and 100. The IMS, solvent, and fragmentation studies provide experimental evidence that nitazenes potentially exhibit three gas-phase protomers. In conclusion, the cyclic IMS capability of SLIM was also employed to partially resolve four sets of structurally similar nitazene isomers (e.g., protonitazene/isotonitazene, butonitazene/isobutonitazene/secbutonitazene), showcasing the potential of using high-resolution IMS separations in MS-based workflows for reference-free identification of emerging nitazenes and other NSOs.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗