Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase boundary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

A twist grain boundary phase in aqueous solutions of the nucleic acid tetramer GTAC

At high concentration, long Watson/Crick (WC) double-helixed DNA forms columnar crystal or liquid crystal phases of linear, parallel duplex chains packed on periodic lattices. This can also be a structural motif of short NA oligomers such as the 5’-GTAC-3’ studied here, which makes four-base WC duplexes having hydrophobic blunt ends. End-to-end aggregation then assembles these duplexes into columns and columnar phases are stabilized, in spite of breaks in the double helix every four bases. But the new degrees of freedom introduced by such breaks also enable opportunities for a more diverse palette of self-assembly modes, producing striking self-assemblies of DNA that would not be achievable with contiguous polymers. These include recently reported three-dimensional (3D) periodic low-density nanoscale networks of GCCG, and the twist grain boundary (TGB) phase presented here. In the TGB, columns of GTAC pairs assemble into monolayer sheets in which the duplex columns are mutually parallel. However, unlike in the columnar crystals, these sheets stack in helical fashion into lamellar arrays in which the column axis of each layer is rotated through a 60° angle with respect to the columns in neighboring layers. This assembly of DNA is unique in that it the fills a 3D volume wherein the major grooves of columns in each layer mutually enter and interlock with the major grooves of columns in neighboring layers. This locking is optimized by small adjustments in structure enabled by the breaks in the duplex backbones.

DNA↗
DOE OSTI2024

Cubic and hexagonal boron nitride phases and phase boundaries

We used temperature-dependent spark plasma sintering to induce phase transformations of metastable 3D c-BN to mixed-phase 3D/2D c-BN/h-BN and ultimately to the stable 2D h-BN phase at high temperature, useful for extreme-temperature technology.

Materials Science↗
DOE OSTI2023

Grain Boundary Phases in NbFeSb Half‐Heusler Alloys: A New Avenue to Tune Transport Properties of Thermoelectric Materials

Abstract Many thermoelectric materials benefit from complex microstructures. Grain boundaries (GBs) in nanocrystalline thermoelectrics cause desirable reduction in the thermal conductivity by scattering phonons, but often lead to unwanted loss in the electrical conductivity by scattering charge carriers. Therefore, modifying GBs to suppress their electrical resistivity plays a pivotal role in the enhancement of thermoelectric performance, zT . In this work, different characteristics of GB phases in Ti‐doped NbFeSb half‐Heusler compounds are revealed using a combination of scanning transmission electron microscopy and atom probe tomography. The GB phases adopt a hexagonal close‐packed lattice, which is structurally distinct from the half‐Heusler grains. Enrichment of Fe is found at GBs in Nb 0.95 Ti 0.05 FeSb, but accumulation of Ti dopants at GBs in Nb 0.80 Ti 0.20 FeSb, correlating to the bad and good electrical conductivity of the respective GBs. Such resistive to conductive GB phase transition opens up new design space to decouple the intertwined electronic and phononic transport in thermoelectric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Shock melting and the hcp-bcc phase boundary of Mg under dynamic loading

The high-temperature and high-pressure response of magnesium has been investigated through shock-release experiments performed up to shock melting. The longitudinal and bulk sound speeds of Mg are reported along the Hugoniot from 25 to 56 GPa and used to determine the elastic properties and Grüneisen parameter. The hexagonal close-packed (hcp)–body-centered cubic (bcc) phase transition is marked by a reduction in the determined shear wave speed. Thermal softening is observed to begin between 40 and 44 GPa, with incipient melt at 55.5 GPa, in close agreement with previous diffraction measurements under laser shock loading. Examination of the release profiles showed that two different responses were observed, depending on the peak stress. When plotted in a stress-energy phase diagram, the two responses are observed to form separate lines that intersect the static hcp-bcc phase transition and incipient melt. The results indicate that the hcp-bcc transition occurs on the Hugoniot at 28.4 GPa and place the hcp-bcc-liquid triple point ~20 GPa. In conclusion, a multiphase equation of state is developed which places the melt boundary below the previously reported static measurements.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Co-, Ni- and Fe-rich grain-boundary phases enhance creep resistance in θ'-strengthened Al-Cu alloys

Here, microstructural evolution and creep response were investigated in the cast Al-5.0Cu-0.3Mn-0.2Zr (wt.%) alloy with and without addition of slow-diffusing, intermetallic-forming elements Fe, Ni, or Co. Baseline Al-5.0Cu-0.3Mn-0.2Zr alloy exhibits high creep resistance at 300 °C, up to ~75 MPa, which is attributed to high-aspect-ratio, intragranular θ'-Al 2 Cu precipitates that effectively suppress dislocation climb. However, θ'-Al 2 Cu precipitate-free zones form along grain boundaries upon heat treatment, whose extent is amplified during subsequent creep. Such weak regions experience dislocation creep, leading to strain localization and acceleration of grain-boundary sliding. Adding Ni and Co, individually or in combination, leads to the formation of grain-boundary precipitates (Al 9 Co 2 , Al 3 Ni 2 ) which are resistant to coarsening, thus suppressing the formation of θ'-Al 2 Cu precipitate-free zones. This microstructure provides high creep resistance at stresses up to 75–80 MPa, with strain rates much lower than in unmodified Al-5.0Cu-0.3Mn-0.2Zr. Adding Fe, which results in extensive decoration of grain boundaries with coarsening-resistant Al 7 Cu 2 Fe, and then increasing the Cu content to compensate for the Cu loss to this new phase, leads to a new Al-7.4Cu-1.6Fe-0.3Mn-0.2Zr alloy with creep resistance at 300 °C that surpasses known cast aluminum alloys. Adding Fe to improve the creep resistance of Al-Cu alloys is both cost-effective and sustainable. Our findings offer guidelines applicable to various alloy systems on controlling the evolution of precipitate-free zones and its ensuing effects on creep deformation.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A spall and diffraction study of nanosecond pressure release across the iron ε-α phase boundary

The extreme response of polycrystalline iron at high pressures and high strain rates is revealed by means of high-power laser pulses. The compression portion of the pulse coupled with x-ray diffraction identifies the expected body-centered cubic (α) to hexagonal close packed (ε) displacive transformation. Upon release, observation shows that the complete reverse transformation takes approximately 8 ns and that the structure returns to its initial microstructural configuration, in a reversible transformation path. This is in good agreement with molecular dynamics (MD) simulations which predict an inverse dependence between transformation time and strain rate. The grain size is reduced from μm to nm range during compression and begins increasing back to the original grain size on decompression. The kinetics of the transition is dictated by heterogenous nucleation as it follows the Johnson-Mehl-Avrami-Kolmogorov equation with the appropriate time exponent of ~1. This is confirmed by MD simulations which also identify profuse twinning and dislocation generation. Here, the tensile pulse generated upon reflection at the free surface is captured by time-resolved free surface velocity measurements from which a peak tensile stress of 7 GPa is obtained, in stark contrast with its quasi-static value of ~200 MPa. At these strain rates, the strength of grain interiors, which is determined by twinning and slip exceeds the strength of the boundaries, and failure initiates preferentially in the latter.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Interfacial intermixing and anti-phase boundaries in GaP/Si(0 0 1) heterostructures

Epitaxial GaP/Si heterostructures grown by molecular beam epitaxy (MBE) and migration-enhanced epitaxy (MEE) have been studied, primarily using aberration-corrected scanning transmission electron microscopy (AC-STEM). Atomically-resolved structure images, which are sensitive to atomic-column intensity revealed the detailed geometry of antiphase boundaries that were both parallel and also inclined to the growth direction. The polar/non-polar GaP/Si interfaces were neither atomically flat laterally nor abrupt vertically. Measurements of intensity profiles using both bright-field and dark-field AC-STEM images, as well as chemically-sensitive g 002 dark-field imaging, indicated substantial interfacial intermixing, which increased significantly from ~1.3 nm (MEE growth at 440 °C) to ~2.1 nm (MBE growth at 600 °C). The finite interface width will impact theoretical predictions of charge imbalance and strong electric fields across the heterointerface.

36 MATERIALS SCIENCE↗