Search NASA⌕ Search

SEARCH · Search NASA

Results for “plasma control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Mass analysis addition to the Differential Ion Flux Probe (DIFP) study

The objective of this study is to develop a technique to measure the characteristics of space plasmas under highly disturbed conditions; e.g., non-Maxwellian plasmas with strong drifting populations and plasmas contaminated by spacecraft outgassing. The approach, conducted in conjunction with current MSFC activities, is to extend the capabilities of the Differential Ion Flux Probe (DIFP) to include a high throughput mass measurement that does not require either high voltage or contamination sensitive devices such as channeltron electron multipliers or microchannel plates. This will significantly reduce the complexity and expense of instrument fabrication, testing, and integration of flight hardware compared to classical mass analyzers. The feasibility of the enhanced DIFP has been verified by using breadboard test models in a controlled plasma environment. The ability to manipulate particles through the instrument regardless of incident angle, energy, or ionic component has been amply demonstrated. The energy analysis mode is differential and leads directly to a time-of-flight mass measurement. With the new design, the DIFP will separate multiple ion streams and analyze each stream independently for ion flux intensity, velocity (including direction of motion), mass, and temperature (or energy distribution). In particular, such an instrument will be invaluable on follow-on electrodynamic TSS missions and, possibly, for environmental monitoring on the space station.

Wright, K. H., Jr.↗
NASA NTRS1979

Hyperthermia and exercise

The paper emphasizes fluid and electrolyte parameters that affect the hyperthermia of physical exercise (metabolic heat production). The major hypothesis discussed is that fluid and electrolyte changes influence thermal regulation within the fine control boundaries. A second working hypothesis is that the elevation of core temperature during exercise is a regulated phenomenon that is beneficial to the organism in terms of efficiency and potential for survival and is not merely a failure of the thermoregulatory control system. The central thermoregulatory mechanism seems more responsive to the hypothermic effect of calcium than to the hyperthermic effect of sodium. The mechanisms controlling plasma fluid-electrolyte shifts, particularly during exercise and recovery from exercise, may play an important part in exercise thermoregulation.

Greenleaf, J. E.↗
NASA NTRS1984

The DE-AC accelerator system for high beam current density

A radically different ion accelerator system design has been developed to increase the extracted beam current density of ion thrusters. By independently controlling plasma ion extraction and acceleration, the Decoupled Extraction and Amplified Current (DE-AC) accelerator system gives higher beam currents at lower electric field stress levels. Results are presented for DE-AC grid system operation with the Test Bed Ion Engine. Using argon propellant, feasibility of a 60 mA/sq cm beam current density is shown. A discussion of power supply requirements, specific impulse operation and grid system geometrical design is presented also.

Aston, G.↗
NASA NTRS1985

An analysis of doping modulated superlattice structures

A new method of growing doping modulated superlattice structures is discussed. This method uses organo-metallic chemical vapor deposition (MO-CVD) with the added feature of controlled plasma in the growth regions. The main objective was to study how the growth environment affected the electronic and optical properties of the superlattice structures. Because a serious safety hazard was discovered in the growth process, no superlattice structures were fabricated and the research on this material had to be terminated. The hazard had to do with the lack of adequate means for the disposal of toxic elemental beryllium.

Buoncristiani, A. M.↗
NASA NTRS2000

The pressor response to water drinking in humans : a sympathetic reflex?

BACKGROUND: Water drinking increases blood pressure profoundly in patients with autonomic failure and substantially in older control subjects. The mechanism that mediates this response is not known. METHODS AND RESULTS: We studied the effect of drinking tap water on seated blood pressure in 47 patients with severe autonomic failure (28 multiple system atrophy [MSA], 19 pure autonomic failure patients [PAF]). Eleven older controls and 8 young controls served as control group. We also studied the mechanisms that could increase blood pressure with water drinking. Systolic blood pressure increased profoundly with water drinking, reaching a maximum of 33+/-5 mm Hg in MSA and 37+/-7 in PAF mm Hg after 30 to 35 minutes. The pressor response was greater in patients with more retained sympathetic function and was almost completely abolished by trimethaphan infusion. Systolic blood pressure increased by 11+/-2.4 mm Hg in elderly but not in young controls. Plasma norepinephrine increased in both groups. Plasma renin activity, vasopressin, and blood volume did not change in any group. CONCLUSIONS: Water drinking significantly and rapidly raises sympathetic activity. Indeed, it raises plasma norepinephrine as much as such classic sympathetic stimuli as caffeine and nicotine. This effect profoundly increases blood pressure in autonomic failure patients, and this effect can be exploited to improve symptoms due to orthostatic hypotension. Water drinking also acutely raises blood pressure in older normal subjects. The pressor effect of oral water is an important yet unrecognized confounding factor in clinical studies of pressor agents and antihypertensive medications.

Non-NASA Center↗
NASA NTRS2020

NASA Next-Generation Sensing Technologies for Earth & Planetary Science

Dr. Ved Chirayath's seminar will highlight new sensing technologies and airborne platforms he is developing for Earth & Space Science as director of the NASA Silicon Valley Laboratory for Advanced Sensing. His talk will feature recent work on Fluid Lensing, the first remote sensing technology capable of imaging through ocean waves in 3D at sub-cm resolutions, MiDAR, a next-generation active hyperspectral remote sensing and optical communications instrument, airborne gas sensing of multipollutant combustion sources, and a plasma actuated unmanned aerial vehicle (UAV) that utilized high-voltage dielectric discharge devices to achieve the first plasma controlled flight in history.Fluid Lensing and the NASA FluidCam instrument have been used extensively to provide distortion-free 3D multispectral imagery from UAVs of shallow marine systems around the world. MiDAR is being deployed on aircraft and underwater remotely operated vehicles (ROVs) as a new method to remotely sense living and nonliving structures in extreme environments as an analog for future Ocean Worlds robotic exploration missions. Finally, Chirayath will present preliminary results from NeMO-Net, a supercomputer-based neural network that uses a citizen science video game for global multimodal coral reef benthic habitat mapping, fusing remote sensing data from Fluid Lensing, MiDAR, NASA's Earth Observing System, and commercial satellites, to better understand the present and past dynamics of shallow marine systems. Together, these maturing technologies present promising new ways in which to explore terrestrial, marine, and aerial systems on Earth, and, ultimately, aid in the search for extraterrestrial life within our solar system and beyond.

Chirayath, Ved↗
NASA NTRS2003

Enhanced Design of Turbo-jet LPT by Separation Control Using Phased Plasma Actuators

This work deals with the documentation and control of flow separation that occurs over turbine blades in the low-pressure turbine stage at low Reynolds numbers that exist at high altitude cruise. We utilize a specially constructed linear cascade that is designed to study the flow field over a generic LPT cascade consisting of Pratt & Whitney 'Pak B' shaped blades. This facility was constructed under a previous one-year NASA Glenn RC initiative. The center blade in the cascade is instrumented to measure the surface pressure coefficient distribution. Optical access allows two-component LDV measurement for boundary layer profiles. Experimental conditions have been chosen to give a range of chord Reynolds numbers from 10 to 100K, and a range of free-stream turbulence levels from u'/U(sub infinity)= 0.08 to 3 percent. The surface pressure measurements were used to define a region of separation and reattachment that depend on the free-stream conditions. The location of separation was found to be relatively insensitive to the experimental conditions. However, reattachment location was very sensitive to the turbulence level and Reynolds number. Excellent agreement was found between the measured pressure distributions and predictions from Euler and RANS simulations. Two-component LDV measurements are presently underway to document the mean and fluctuating velocity components in the boundary layer over the center blade for the range of experimental conditions. The fabrication of the plasma actuator is underway. These are designed to produce either streamwise vortices, or a downstream-directed wall jet. A precursor experiment for the former approach was performed with an array of vortex generators placed just upstream of the separation line. These led to reattachment except for the lowest Reynolds number. Progress has also been made on the proposed concept for a laterally moving wake. This involved constructing a smaller wind tunnel and molding an array of symmetric airfoils to form an array. Following its development, it will be scaled up and used to introduce lateral moving wakes upstream up the Pak-B cascade.

Ashpis, David↗
NASA NTRS1987

Hollow cathode plasma source for active spacecraft charge control

A prototype plasma source spacecraft discharge device has been developed to control overall and differential spacecraft surface charging. The plasma source is based on a unique hollow cathode discharge, where the plasma generation process is contained completely within the cathode. This device can be operated on argon, krypton, or xenon and has a rapid cold start time of less than 4 s. The discharge system design includes a spacecraft-discharge/net-charge sensing circuit which provides the ability to measure the polarity, magnitude, pulse shape, and time duration of a discharging event. Ion currents of up to 325 microA and electron currents ranging from 0.02 to 6.0 A have been extracted from the device. In addition, the spacecraft discharge device successfully discharged capacitively biased plates, from as high as + or - 2500 V, to ground potential, and discharged and clamped actively biased plates at +5 V with respect to ground potential during ground simulation testing.

Deininger, William D.↗
NASA NTRS2003

Demonstration of Separation Control Using Glow-Discharge Plasma Actuators

Active flow control of boundary-layer separation using glow-discharge plasma actuators is studied experimentally. Separation is induced on a flat plate installed in a closed-circuit wind tunnel by a shaped insert on the opposite wall. The flow conditions represent flow over the suction surface of a modem low-pressure-turbine airfoil. The Reynolds number, based on wetted plate length and nominal exit velocity, is varied from 50,000 to 300,000, covering cruise to takeoff conditions. Low (0.2%) and high (2.5%) free-stream turbulence intensities are set using passive grids. A spanwise-oriented phased-plasma-array actuator, fabricated on a printed circuit board, is surface-flush-mounted upstream of the separation point and can provide forcing in a wide frequency range. Static surface pressure measurements and hot-wire anemometry of the base and controlled flows are performed and indicate that the glow-discharge plasma actuator is an effective device for separation control.

Hultgren, Lennart S.↗
NASA NTRS2004

Glow Discharge Plasma Demonstrated for Separation Control in the Low-Pressure Turbine

Flow separation in the low-pressure turbine (LPT) is a major barrier that limits further improvements of aerodynamic designs of turbine airfoils. The separation is responsible for performance degradation, and it prevents the design of highly loaded airfoils. The separation can be delayed, reduced, or eliminated completely if flow control techniques are used. Successful flow control technology will enable breakthrough improvements in gas turbine performance and design. The focus of this research project was the development and experimental demonstration of active separation control using glow discharge plasma (GDP) actuators in flow conditions simulating the LPT. The separation delay was shown to be successful, laying the foundation for further development of the technologies to practical application in the LPT. In a fluid mechanics context, the term "flow control" means a technology by which a very small input results in a very large effect on the flow. In this project, the interest is to eliminate or delay flow separation on LPT airfoils by using an active flow control approach, in which disturbances are dynamically inserted into the flow, they interact with the flow, and they delay separation. The disturbances can be inserted using a localized, externally powered, actuating device, examples are acoustic, pneumatic, or mechanical devices that generate vibrations, flow oscillations, or pulses. A variety of flow control devices have been demonstrated in recent years in the context of the external aerodynamics of aircraft wings and airframes, where the incoming flow is quiescent or of a very low turbulence level. However, the flow conditions in the LPT are significantly different because there are high levels of disturbances in the incoming flow that are characterized by high free-stream turbulence intensity. In addition, the Reynolds number, which characterizes the viscous forces in the flow and is related to the flow speed, is very low in the LPT passages.

Ashpis, David e.↗
NASA NTRS2002

Variable Specific Impulse Magnetoplasma Rocket Engine

An engine is disclosed, including a controllable output plasma generator, a controllable heater for selectably raising a temperature of the plasma connected to an outlet of the plasma generator, and a nozzle connected to an outlet of the heater, through which heated plasma is discharged to provide thrust. In one embodiment, the source of plasma is a helicon generator. In one embodiment, the heater is an ion cyclotron resonator. In one embodiment, the nozzle is a radially diverging magnetic field disposed on a discharge side of the heater so that helically travelling particles in the beater exit the heater at high axial velocity. A particular embodiment includes control circuits for selectably directing a portion of radio frequency power from an RF generator to the helicon generator and to the cyclotron resonator so that the thrust output and the specific impulse of the engine can be selectively controlled. A method of propelling a vehicle is also disclosed. The method includes generating a plasma, heating said plasma, and discharging the heated plasma through a nozzle. In one embodiment, the nozzle is a diverging magnetic field. In this embodiment, the heating is performed by applying a radio frequency electro magnetic field to the plasma at the ion cyclotron frequency in an axially polarized DC magnetic field.

Franklin R Chang-Diaz↗
NASA NTRS1986

Controlling Arc Length in Plasma Welding

Circuit maintains arc length on irregularly shaped workpieces. Length of plasma arc continuously adjusted by control circuit to maintain commanded value. After pilot arc is established, contactor closed and transfers arc to workpiece. Control circuit then half-wave rectifies ac arc voltage to produce dc control signal proportional to arc length. Circuit added to plasma arc welding machines with few wiring changes. Welds made with circuit cleaner and require less rework than welds made without it. Beads smooth and free of inclusions.

Iceland, W. F.↗
NASA NTRS1971

Induction plasma calcining of pigment particles for thermal control coatings

Induction plasma heating techniques were studied for calcining zinc orthotitanate particles for use in thermal control coatings. Previous studies indicated that the optimum calcining temperature is between 1400 and 1750 C. An intermediate temperature (1670 C) was chosen as a reference point for running a temperature series at the reference point and 220 C on both sides. The effect of varying chamber temperature on the reflectance spectra, before and after vacuum UV irradiation, is presented. The correlation between Zn2Ti04 paramagnetic resonance activity and its susceptibility to vacuum UV damage is discussed.

Farley, E. P.↗
NASA NTRS1998

Spacecraft Potential Control by the Plasma Source Instrument on the POLAR Satellite

This increasingly recognized that the low-energy core plasma is a critically important part of magnetospheric plasma transport, yet this plasma cannot be accurately measured from spacecraft at potentials much different from that of the ambient plasma. In low-density regions such as the polar cap and lobes, spacecraft charge positively, excluding core ions from the spacecraft and accelerating core electrons so much that their velocities cannot be measured with any accuracy. In regions of high electron pressure and temperature, spacecraft charge negatively, excluding the ambient core electrons and accelerating the core ions so much that their velocity cannot be accurately measured. Plasma contactors have been used on a number of spacecraft operating in low-plasma-density regions to prevent charging of spacecraft to high potentials, particularly when exposed to high fluxes of energetic particles. This concern has prompted extensive studies by NASA for use of plasma contractors on the international space station where solar arrays may significantly affect the spacecraft potential.

Comfort, R. H.↗
NASA NTRS1995

Anti-dopamine beta-hydroxylase immunotoxin-induced sympathectomy in adult rats

Anti-dopamine beta-hydroxylase immunotoxin (DHIT) is an antibody-targeted noradrenergic lesioning tool comprised of a monoclonal antibody against the noradrenergic enzyme, dopamine beta-hydroxylase, conjugated to saporin, a ribosome-inactivating protein. Noradrenergic-neuron specificity and completeness and functionality of sympathectomy were assessed. Adult, male Sprague-Dawley rats were given 28.5, 85.7, 142 or 285 micrograms/kg DHIT i.v. Three days after injection, a 6% to 73% decrease in the neurons was found in the superior cervical ganglia of the animals. No loss of sensory, nodose and dorsal root ganglia, neurons was observed at the highest dose of DHIT. In contrast, the immunotoxin, 192-saporin (142 micrograms/kg), lesioned all three ganglia. To assess the sympathectomy, 2 wk after treatment (285 micrograms/kg), rats were anesthetized with urethane (1 g/kg) and cannulated in the femoral artery and vein. DHIT-treated animals' basal systolic blood pressure and heart rate were significantly lower than controls. Basal plasma norepinephrine levels were 41% lower in DHIT-treated animals than controls. Tyramine-stimulated release of norepinephrine in DHIT-treated rats was 27% of controls. Plasma epinephrine levels of DHIT animals were not reduced. DHIT-treated animals exhibited a 2-fold hypersensitivity to the alpha-adrenergic agonist phenylephrine. We conclude that DHIT selectively delivered saporin to noradrenergic neurons resulting in destruction of these neurons. Anti-dopamine beta-hydroxylase immunotoxin administration produces a rapid, irreversible sympathectomy.

NASA Discipline Regulatory Physiology↗
NASA NTRS1983

A deficiency of O III in the Io plasma torus

Evidence for a deficiency of O III ions in the Io plasma torus is reported and implications of this deficiency for the physical processes controlling the plasma are considered. Observations of the O III 5007-A as well as Cl III and S III emissions from the Io plasma torus were made by a ground-based echelle spectrograph and intensified Reticon detector in February and May, 1981. The O III observations allow an upper limit of 4/cu cm to be placed on torus O III abundance, which is inconsistent with expectations for a low density plasma controlled by electron collisions. The inclusion of ion-ion and ion-atom charge exchange reactions and a depleted high energy electron component in the model is found to suppress O III levels, however observed limiting values are only achieved if it is assumed that the O III is kinetically hot. In addition, the charge-exchange model developed is inconsistent with previous observations of the kinetics of the S II-S III system. The present observations also establish upper limits of 2 R on 5518-A and 5538-A Cl III emission, and an emission rate of 58 + or - 40 R for the S III 6312-A line in the hot torus.

Brown, R. A.↗