Search NASA⌕ Search

SEARCH · Search NASA

Results for “plasma environments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

High-Frequency Density Oscillations from a Plasma Source Used for Simulating Low-Earth Orbit Plasma Environment

We present data from ground-based, vacuum-chamber tests demonstrating the ability to modulate the output of a plasma source capable of producing a low-Earth orbit (LEO) type plasma. We obtained plasma oscillations up to 2.5 kHz impingent on stationary test equipment, which corresponds to meter-level ionospheric structures in LEO. This plasma source is, therefore, suitable for developing scientific instruments that measure the LEO plasma environment, in situ, with meter-level spatial resolution. Measurements were made using a fixed-bias collector and an electrometer sampling at 40 kHz. A mechanical aperture was established at the output of the plasma source via two concentric grids. The outer grid was free to rotate in the azimuthal direction with respect to the fixed inner grid. An identical, alternating hole pattern in the two grids resulted in a variable aperture that cycles through 90 open/close cycles per revolution. The frequency of the plasma oscillations is limited by the mechanism used to spin the grids and the bearing assembly on which the grids rotate. Higher frequencies are obtainable by upgrading the drive mechanism, allowing the possibility of centimeter-level spatial resolution.

McTernan, Jesse K.↗
NASA NTRS2017

Influence of Plasma Environment on K-Line Emission in Highly Ionized Iron Atoms Evaluated Using a Debye-Huckel Model

The influence of plasma environment on the atomic parameters associated with the K-vacancy states has been investigated theoretically for several iron ions. To do this, a time-averaged Debye-Huckel potential for both the electron-nucleus and electron-electron interactions has been considered in the framework of relativistic multiconfiguration Dirac-Fock computations. More particularly, the plasma screening effects on ionization potentials, K-thresholds, transition energies, and radiative rates have been estimated in the astrophysical context of accretion disks around black holes. In the present paper, we describe the behavior of those atomic parameters for Ne-, Na-, Ar-, and K-like iron ions.

Deprince, J.↗
NASA NTRS2004

Representation of the Geosynchronous Plasma Environment for Spacecraft Charging Calculations

Historically, our ability to predict and postdict surface charging has suffered from both a lack of reliable secondary emission and backscattered electron yields and poor characterization of the plasma environment. One difficulty lies in the common practice of fitting the plasma data to a Maxwellian or Double Maxwellian distribution function, which may not represent the data well for charging purposes. For 13 years Los Alamos National Laboratory (LANL) has been accumulating measurements of electron and proton spectra from Magnetospheric Plasma Analyzer (MPA) instruments aboard a series of geosynchronous satellites. These data provide both a plasma characterization and the potential of the instrument ground. We use electron and ion flux spectra measured by the LANL MPA to examine how the use of different spectral representations of the charged particle environment in computations of spacecraft potentials during magnetospheric substorms affects the accuracy of the results. We calculate the spacecraft potential using both the measured fluxes and several different fits to these fluxes. These flux measurements and fits have been corrected for the difference between the measured and calculated potential. The potentials computed using the measured fluxes, the best available material properties of graphite carbon, and a secondary electron escape fraction of 81%, are within a factor of three of the measured potential for nearly all the data. Using a Kappa fit to the electron distribution function and a Maxwellian fit to the ion distribution function gives agreement similar to the calculations using the actual data. Alternative spectral representations, including Maxwellian and double Maxwellian for both species, lead to less satisfactory agreement between predicted and measured potentials.

Davis, V. A.↗
NASA NTRS2011

The Plasma Environment at Mercury

Mercury is the least explored terrestrial planet, and the one subjected to the highest flux of solar radiation in the heliosphere. Its highly dynamic, miniature magnetosphere contains ions from the exosphere and solar wind, and at times may allow solar wind ions to directly impact the planet's surface. Together these features create a plasma environment that shares many features with, but is nonetheless very different from, that of Earth. The first in situ measurements of plasma ions in the Mercury space environment were made only recently, by the Fast Imaging Plasma Spectrometer (FIPS) during the MESSENGER spacecraft's three flybys of the planet in 2008-2009 as the probe was en route to insertion into orbit about Mercury earlier this year. Here. we present analysis of flyby and early orbital mission data with novel techniques that address the particular challenges inherent in these measurements. First. spacecraft structures and sensor orientation limit the FIPS field of view and allow only partial sampling of velocity distribution functions. We use a software model of FIPS sampling in velocity space to explore these effects and recover bulk parameters under certain assumptions. Second, the low densities found in the Mercury magnetosphere result in a relatively low signal-to-noise ratio for many ions. To address this issue, we apply a kernel density spread function to guide removal of background counts according to a background-signature probability map. We then assign individual counts to particular ion species with a time-of-flight forward model, taking into account energy losses in the carbon foil and other physical behavior of ions within the instrument. Using these methods, we have derived bulk plasma properties and heavy ion composition and evaluated them in the context of the Mercury magnetosphere.

Raines, James M.↗
NASA NTRSDate not supplied

SelenITA: A Dual-Spacecraft Lunar Cubesat Mission to Characterize the Near-Surface Electromagnetic Plasma Environment

SelenITA is an international interdisciplinary mission consisting of two CubeSats that will provide the first multi-point measurement in a sustained low lunar orbit. This mission will advance the understanding of spatiotemporal differentiation of the electromagnetic space environment at the Moon in support of Artemis crew and the geosciences. The mission science objectives are to: (1) further constrain the origins of crustal magnetic fields and their applications; (2) determine the nature of plasma interactions with crustal magnetic fields; (3) characterize plasma waves and turbulence at the Moon; (4) characterize the lunar surface potential in all plasma environments; (5) constrain the composition, thermal state, and structure of the lunar upper mantle and crust; (6) characterize the ionizing radiation in lunar orbit; (7) determine the density of the dust exosphere as a function of latitude, longitude, and altitude, including the lunar polar space environment. The measurement requirements include: 3-component vector magnetic field, plasma distribution (flux, energy, density, temperature), energetic particles (protons, electrons, gamma rays), and dust. SelenITA builds on a rich history of electromagnetic plasma observations of the near lunar surface and space environment, and it answers high level science questions with state of the art instruments in a small package.

space weather↗
NASA NTRS1994

Hypervelocity impact induced arcing and Kapton pyrolization in a plasma environment

Tests were performed on the Space Station Freedom (SSF) solar array flat conductor circuit (FCC) to determine if hypervelocity impacts could induce pyrolization of Kapton and/or cross-conductor arcing. A sample piece of FCC was placed in a plasma environment and biased to +200 V relative to the plasma potential. The FCC was then impacted with particles in the 100 micron size range with hypervelocities of about 7 km/s. These tests were unable to induce Kapton pyrolization, cross-conductor arcing, or any other plasma interaction.

Christie, Robert J.↗
NASA NTRS2014

Titan's Plasma Environment : 3D Hybrid Kinetic Modeling of the TA Flyby and Comparison with CAPS-ELS and RPWS LP Observations

In this report we discuss the global plasma environment of the TA flyby from the perspective of 3D hybrid modeling. In our model the background, pickup, and ionospheric ions are considered as particles, whereas the electrons are described as a fluid. In homogeneous photoionization, electron-impact ionization and charge exchange are included in our model. We also take into account the collisions between the ions and neutrals. Our modeling shows that mass loading of the background plasma (H(+), O(+)) by pick up ions H2(+), CH4(+) and N2(+) differs from theT9 encounter simulations when O(+) ions are not introduced into the background plasma. In our hybrid-modeling we use Chamberlain profiles for the atmospheric components. We also include a simple ionosphere model with average mass M=28 amu ions that were generated inside the ionosphere. Titan's interior is considered as a weakly conducting body. Special attention has been paid to comparing the simulated pickup ion density distribution with CAPS-ELS and with RPWS LP observations by the Cassini-Huygens spacecraft along theta trajectory. Our modeling shows an asymmetry of the ion density distribution and the magnetic field, including the formation of Alfven wing-like structures.

induced magnetospheres↗
NASA NTRS1996

3-D Simulations of NSTAR Ion Thruster Plasma Environment

Full three-dimensional numerical models based on partical-in-cell with Monte Carlo collisions (PIC-MCC) simulations are developed to study ion thruster plasma interactions. 3-D simulation results for the NSTAR ion thruster plasma environment are presented.

NSTAR↗
NASA NTRS2020

Plasma environment effects on K lines of astrophysical interest IV. IPs, K thresholds, radiative rates, and Auger widths in Fe ii–Fe viii

Aims. Within the framework of compact-object accretion disks, we calculate plasma environment e ects on the atomic structure and decay parameters used in the modeling of K lines in lowly charged iron ions, namely Fe ii–Fe viii. Methods. For this study, we used the fully relativistic multiconfiguration Dirac–Fock method approximating the plasma electron–nucleus and electron-electron screenings with a time-averaged Debye-Hückel potential. Results. We report modified ionization potentials, K-threshold energies, wavelengths, radiative emission rates, and Auger widths for plasmas characterized by electron temperatures and densities in the ranges 10(exp 5)-10(exp 7) K and 10(exp 18)-10(exp 22) per cu.cm. In addition, we propose two universal fitting formulae to predict the IP and K-threshold lowerings in any elemental ion. Conclusions. We conclude that the high-resolution X-ray spectrometers onboard the future XRISM and ATHENA space missions will be able to detect the lowering of the K edges of these Fe ions due to the extreme plasma conditions occurring in the accretion disks around compact objects.

J. Deprince↗
NASA NTRS1992

Arcing of negatively biased solar cells in a plasma environment. I - Experimental observations

A variety of experiments have been performed which identify key factors contributing to the arcing of negatively biased high voltage solar cells operating in a low earth orbit plasma environment. These efforts have led to a reduction of greater than a factor of 100 in the arc frequency of a single cells following proper remeditation procedures. Experiments naturally led to and focused on the adhesive/encapsulating that is used to bond the protective cover slip to the solar cell. An image-intensified CCD camera system recorded UV emission from arc events which occurred exclusively along the interfacial edge between the cover slip and the solar cell. Microscopic inspection of this interfacial region showed a bead of encapsulant along this entire edge. Elimination of this encapsulant bead reduced the arc frequency by two orders of magnitude.

Upschulte, B. L.↗
NASA NTRS2020

Plasma-environment effects on K lines of astrophysical interest III. IPs, K thresholds, radiative rates, and Auger widths in Fe ix – Fe xvi

Aims. In the context of black-hole accretion disks, we aim to compute the plasma-environment e ects on the atomic parameters used to model the decay of K-vacancy states in moderately charged iron ions, namely Fe ix – Fe xvi. Methods. We used the fully relativistic multiconfiguration Dirac–Fock method approximating the plasma electron–nucleus and electron–electron screenings with a time-averaged Debye–Hückel potential. Results. We report modified ionization potentials, K-threshold energies, wavelengths, radiative emission rates, and Auger widths for plasmas characterized by electron temperatures and densities in the ranges 10^(5)-10^(7) K and 10^(18)-10^(22)/cu. cm. Conclusions. This study confirms that the high-resolution X-ray spectrometers onboard the future XRISM and Athena space missions will be capable of detecting the lowering of the K edges of these ions due to the extreme plasma conditions occurring in accretion disks around compact objects.

J. Deprince↗
NASA NTRS2006

Radiation and Plasma Environments for Lunar Missions

Space system design for lunar orbit and extended operations on the lunar surface requires analysis of potential system vulnerabilities to plasma and radiation environments to minimize anomalies and assure that environmental failures do not occur during the mission. Individual environments include the trapped particles in Earth s radiation belts, solar energetic particles and galactic cosmic rays, plasma environments encountered in transit to the moon and on the lunar surface (solar wind, terrestrial magnetosheath and magnetotail, and lunar photoelectrons), and solar ultraviolet and extreme ultraviolet photons. These are the plasma and radiation environments which contribute to a variety of effects on space systems including total ionizing dose and dose rate effects in electronics, degradation of materials in the space environment, and charging of spacecraft and lunar dust. This paper provides a survey of the relevant charged particle and photon environments of importance to lunar mission design ranging from the lowest (approx.few 10 s eV) photoelectron energies to the highest (approx.GeV) cosmic ray energies.

Minow, Joseph I.↗
NASA NTRS2019

Plasma environment effects on K lines of astrophysical interest II. Ionization potentials, K thresholds, radiative rates, and Auger widths in Ne- through He-like iron ions (Fe xvii – Fe xxv)

Aims. In the context of accretion disks around black holes, we estimate plasma-environment effects on the atomic parameters associated with the decay of K-vacancy states in highly charged iron ions, namely Fe XVII – Fe XXV. Methods. Within the relativistic multiconfiguration Dirac–Fock (MCDF) framework, the electron–nucleus and electron–electron plasma screenings were approximated with a time-averaged Debye–Hückel potential. Results. Modified ionization potentials, K thresholds, wavelengths, radiative emission rates, and Auger widths are reported for astrophysical plasmas characterized by electron temperatures and densities in the ranges 10^5 − 10^7 K and 10^18 − 10^22 per cu.cm, respectively. Conclusions. We conclude that the high-resolution microcalorimeters on board future X-ray missions such as XRISM and ATHENA are expected to be sensitive to the lowering of the iron K edge due to the extreme plasma conditions occurring in accretion disks around compact objects.

J. Deprince↗
NASA NTRS2018

Venera-D Mission Concept to Study Atmosphere, Surface and Plasma Environment: Phase II Report of the Venera-D Joint Science Definition Team

Venus and Earth were formed approximately the same distance from the Sun, and have almost the same masses and volumes: they should be the most similar pair of planets in the Solar System. A vital, outstanding question is how and when these planets diverged in their atmospheric evolutions. Significantly, recent investigations present evidence for microbial life in Venus' cloud deck. Venus presents us with fundamental questions about the origin and evolution of planetary bodies and life in our Solar System.Venera-D (D stands for the Russian word for "long-lived:" dolgozhivushaya) is a potential mission that would combine simultaneous observations of Venus' atmosphere, plasma environment, and surface to try to answer these essential questions.

Zasova, L.↗
DOE OSTI2026

Automation of Nanoparticle Synthesis Processes in a Plasma Environment Using LabVIEW

This work presents an automated control system for the synthesis of nanomaterials by plasma-enhanced chemical vapor deposition (PECVD), implemented using the LabVIEW software environment. The main objective of the study is to develop an integrated hardware-software platform that enables sequential control of the key stages of the PECVD process, including vacuum chamber preparation, pressure monitoring, working gas supply, plasma ignition, power matching, cyclic nanomaterial growth, and optical monitoring of nanoparticles in the plasma environment. The use of LabVIEW made it possible to integrate actuator control, experimental parameter acquisition, and realtime process visualization within a single automated system. The automated cycle begins with evacuation of the reaction chamber to a predefined base pressure. Transition to the next stage is permitted only after the specified pressure threshold has been reached, ensuring reproducible initial conditions for each experiment. The program then controls the supply of the working gas through mass flow controllers (MFCs). In this work, two gas-flow control modes were considered: analog control using a 0-5 V voltage signal and digital communication via RS-232 interface. It was shown that the analog approach requires accurate scaling of the control voltage, since applying 5 V corresponds to full-scale opening of the controller and results in the maximum gas flow. In contrast, the RS232 interface enables the gas flow rate to be specified directly in sccm, improving the accuracy, flexibility, and convenience of gas-environment control. After pressure stabilization, LabVIEW initiates RF plasma ignition and executes the RF matching algorithm aimed at minimizing reflected power and improving the stability of the plasma process. A separate software module implements the cyclic nanomaterial growth mode, in which the plasma-on time, plasma duration, and total number of synthesis cycles are predefined. This approach makes it possible to control material accumulation on the substrate and to correlate the process parameters with the morphological characteristics of the resulting nanostructures. The final module of the system is designed for optical monitoring of the nanoparticle cloud density in dusty plasma. For this purpose, the change in the intensity of laser radiation passing through the plasma region is recorded using a photodetector and a Keithley 2401 measuring unit connected to LabVIEW via RS-232 interface. The difference between the initial and modified optical signal intensity is used as a diagnostic parameter characterizing the formation and temporal evolution of nanoparticles. The developed system demonstrates that LabVIEW can be effectively applied not only for the automation of individual instruments, but also for the implementation of a complete digital control cycle for PECVD-based nanomaterial synthesis.

PECVD↗
NASA NTRS1989

Kinetic modeling of the Saturn ring-ionosphere plasma environment

A time-independent kinetic plasma model was developed on the basis of the Li et al. (1988) semikinetic plasma model and was used to study the interaction of the Saturnian ionosphere and ring plasma. The model includes the gravitational magnetic mirror and centripetal and ambipolar electric forces, and the effect of the mixing of two plasma populations. The results obtained indicate that the density, temperature, and composition of plasma near the rings changing in the direction from the inner C ring to the outer A ring, due to the fact that the predominant source of plasma changes from the ionosphere to the rings. The model results also suggest that the outflow of hydrogen from the ionosphere to the rings may be shut off for field lines passing through the outer B and A ring, due to the ambipolar electric field set up by the warm ring plasma trapped near the ring plane by the centipetal force. In these regions, there will be a net flux of O(+) ions from the rings to the ionosphere.

Wilson, G. R.↗
NASA NTRS2023

SelenITA: A Dual Point Lunar Mission to Characterize the Near Surface Dust and Electromagnetic Plasma Environment

SelenITA is a dual CubeSat mission that will provide the first multi-point dust, plasma, and magnetic field measurements in lunar orbit. This mission will advance the understanding of the electromagnetic space environment at the Moon in support of the Artemis program, exploration, and the geosciences. Here we present the science rationale motivating the mission. The candidate mission science objectives include: (1) constrain the origins of crustal magnetic fields; (2) determine the nature of plasma interactions with crustal magnetic fields; (3) characterize plasma waves and turbulence at the Moon; (4) characterize the lunar surface electric potential in varying plasma environments; (5) constrain the composition, thermal state, and structure of the lunar upper mantle and crust; (6) characterize the ionizing radiation in lunar orbit; and lastly, (7) determine the density of the dust exosphere as a function of latitude, longitude, and altitude, including the lunar polar space environment. The measurement requirements include simultaneous two-point observations of the 3-component vector magnetic field, plasma distribution (flux, energy, density, temperature), and single-point observations of energetic particles (protons, electrons, gamma rays), and dust. These measurements are important because it helps us understand how future astronauts, robots, and space hardware will live and work on the lunar surface.

space weather↗