Search NASA⌕ Search

SEARCH · Search NASA

Results for “plastic circularity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Solventless, Ambient-Pressure Production of Bio-Based Lactones Over Earth-Abundant, Mixed Metal Oxide Catalysts for Circular Polyesters

Transitioning to a circular plastics economy will require use of renewable feedstocks, energy-efficient processes, and closed-loop recyclable polymers, such as polyesters. A key challenge lies in sustainably sourcing monomers used to make recyclable polyesters. This work presents a catalytic platform utilizing earth-abundant Cu(x)Ca(1-x)O mixed metal oxides for the oxidative dehydrocyclization of bio-based diols to lactones, which are advantaged for energy-efficient ring-opening polymerization. Operating below 200 degrees C, at ambient pressure, and without solvent, the process uses air as the sole oxidant, achieving high yields of lactones across a broad substrate scope of C4-8 diols in the liquid phase. The oxidative dehydrocyclization reaction is thermodynamically downhill due to water formation and energy-efficient compared to incumbent, non-redox pathways utilized in fossil carbon-based industrial processes for lactone production. Mechanistic studies reveal facile redox cycling of Cu2+-O(Ca2+)-Cu2+ interfacial sites unique to the developed catalyst. Techno-economic analysis and life cycle assessment estimate 40% lower energy demand and 15% lower GHG intensity per mass of butyrolactone produced compared to the fossil carbon-based route. Liquid-phase oxidative dehydrocyclization offers a promising approach for scalable lactone production from renewable, bio-based diols to enable circular polyesters.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Investigation of pressure-controlled injection molding on the mechanical properties and embodied energy of recycled high-density polyethylene

Manufacturing with secondary feedstock has been identified as an effective strategy to improve plastic circularity. However, product quality inconsistencies arise due to variations in molecular weight, rheology, and mechanical properties. This work evaluates the processing of recycled high-density polyethylene using pressure-controlled injection molding with a focus on processing behavior and energy consumption. Further, the effects of injection velocity, packing pressure, and transfer position are benchmarked against a conventional velocity-controlled process. The experimental results show that the novel process control strategy significantly affects the mechanical properties, in-mold rheology, and energy consumption. Parts fabricated using pressure-controlled injection molding showed higher tensile properties due to increased macromolecular orientation. Additionally, reduced energy was used due to lower melt pressures required to completely replicate the cavity geometry. The results demonstrate the potential of the technology to support increased utilization of secondary feedstock and reduced carbon footprint.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Chemical recycling of polymer composites induced by selective variable frequency microwave heating

Abstract The application of variable frequency microwave (VFM) heating to achieve rapid thermal depolymerization of polymer composites is reported for the first time. The thermal and chemical influence of composite additives on polymer decomposition has been studied for a set of chemically recyclable polymers, including polyphthalaldehyde, polypropylene carbonate, two polyhydroxyalkanoates, and nylon 6. Carbon‐based additives, specifically nanocarbon particles, were used as effective microwave absorbers to controllably degrade the surrounding polymer matrix into valuable, monomeric compounds. Depolymerization and byproduct confirmation were quantified by gel permeation chromatography and nuclear magnetic resonance spectroscopy. Synergistic effects can be leveraged from pre‐treating composite samples to further reduce the total microwave energy required to depolymerize composite samples. This study establishes the use of VFM heating for chemical recycling of polymer composites that can be leveraged toward a plastic circular economy.

Polymer Science↗
DOE OSTI2026

Covalent Adaptable Networks: Reprocessable Cross-Linked Polymers

Thermoset polymers have desirable properties, such as excellent thermal and mechanical stability, but their covalent cross-links typically prevent repair or recycling. By enabling and controlling dynamic exchange reactions within polymer networks, their covalent bonds rearrange and allow the polymer to be reshaped. These viscoelastic polymer networks, now known as covalent adaptable networks (CANs), are an important frontier for improving plastic circularity, as well as for designing valuable stimuli-responsive materials. This Review describes the history of CANs, dating back to the early days of polymer science, and the evolution of their classification and nomenclature. A comprehensive survey of dynamic reactions and linkage chemistries is provided, as well as methods to characterize and reprocess CANs. Beyond straightforward reprocessing, many advanced applications of CANs and their composites are now emerging. Lastly, we provide perspective on how the development of new chemistries, strategies to control stimuli-responsive bond exchange and mechanical properties, and a deep understanding of exchange reactions will advance this field toward scalable, sustainable, and high-value materials.

Sun, Molly [Northwestern University, Evanston, IL ↗
DOE OSTI2026

Universal Approach for the Depolymerization of Polyamides via Photothermal Conversion

Polyamides (PAs) exhibit excellent chemical stability and mechanical resistance, yet these same characteristics lead to their widespread accumulation in the environment as pollution. In this work, we developed an inclusive and operationally simple photothermal strategy to recycle PAs, overcoming the high energy barriers necessary to break down these materials. PAs can be depolymerized using photothermally mediated ring-closing depolymerization and acidic hydrolysis to afford cyclic and linear monomers using carbon black as a photothermal agent (PTA) under visible light irradiation. We showed that polyamide 6 is efficiently depolymerized to ε-caprolactam with 74% yield in 10 min. Similarly, in 1 h, the photothermal acidic hydrolysis of polyamide 6,6 afforded hexamethylene diamine and adipic acid with 97 and 96% yields, respectively. This method was further applied to a variety of aliphatic and aromatic PAs and mixed PA waste. Both photothermally promoted processes effectively depolymerize pigment-containing postconsumer waste by leveraging existing black pigments as PTAs. Here, photothermal conversion provided a general and rapid route for PA depolymerization under visible light irradiation, enabling high monomer yields with inexpensive reagents and a general tolerance to additives, demonstrating this approach’s potential for a circular plastic economy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Population balance models for polymer upcycling: signatures of the mechanism in the molecular weight evolution

Chemical and catalytic upcycling processes could help realize a circular plastics economy, but current models for testing mechanistic hypotheses and designing catalysts remain primitive. This work shows how proposed catalytic mechanisms can be incorporated into population balance models to predict the time evolution of molecular weight distributions. We develop models for homogeneous and heterogeneous catalysts, including catalysts that cut at chain ends and catalysts that cut at random locations. For heterogeneous catalysts, we illustrate the effect of adsorption constants that depend on polymer chain length. Here, we discuss ongoing efforts and challenges in measuring and modeling the time evolving molecular weight distributions in polymer upcycling processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Scaling the polymerization of polyaldehydes through continuous flow synthesis

Abstract A plug flow reactor was constructed to scale the synthesis of metastable, phthalaldehyde-based polymers to achieve production rates of 1–2 kg per day. The flow-induced mixing and in-line polymerization quench and precipitation sequences resulted in improved polymer purity and long-term stability compared to the same materials made from a conventional batch process. Cryogenic rheology was used to probe the complex fluid dynamics encountered during the polymerization of PPA homopolymers. It is envisioned that this continuous flow manufacturing approach could be extended to other low ceiling temperature or aldehyde monomer systems to help implement and support a plastic circular economy. Graphical abstract

Schwartz, Jared M.↗
DOE OSTI2020

Plastics for a Circular Economy Workshop: Summary Report

This report summarizes the results of a public workshop sponsored by the Bioenergy Technologies Office, the Advanced Manufacturing Office, and Mars held on December 11–12, 2019 in Golden, Colorado. The Plastics for a Circular Economy Workshop brought together experts from industry, academia, and national laboratories to discuss opportunities and challenges facing the development of new technologies to address plastic waste.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Systems Analysis Approach to Polyethylene Terephthalate and Olefin Plastics Supply Chains in the Circular Economy: A Review of Data Sets and Models

The environmental and economic impacts of implementing a circular economy in plastic waste supply chains are not well understood. The proposed systems analysis framework assesses environmental, social, and economic impacts of plastic waste supply chains in a circular economy. The first objective of this article is to identify datasets, models and knowledge gaps associated with waste plastic supply chain processes, mainly in the U.S. Our literature review indicated that the best datasets exist for virgin plastic resin production, mechanical recycling, landfilling, and incineration, with materials recovery facility being intermediate, and with chemical recycling the lowest. The second objective of this article is to develop an illustrative application of the framework by conducting a preliminary systems analysis of PET bottles with closed-loop recycling. Here, the preliminary systems analysis of PET bottles utilized a linear programming optimization method. Our optimization model indicated that both chemical and mechanical recycling processes are needed to achieve a true circular economy of PET bottles with the least greenhouse gas emissions, specifically reductions of 24% when compared with the linear economy. Good quality and standardized life cycle assessment and techno-economic analysis studies are needed to better understand the environmental, economic, and social impacts of advanced sorting and chemical recycling technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Ecologically inspired metrics for transitioning to a sustainable and resilient circular economy with application to multilayer plastic films

Current Circular Economy (CE) frameworks applied to product chains exhibit notable shortcomings. These include neglecting the resilience and robustness of design, requiring detailed economic and environmental data for impact assessment, and relying on qualitative rather than quantitative metrics capturing certain CE design aspects. In the current contribution, we addressed these shortcomings by developing an Ecologically inspired (Eco-inspired) Framework using the mathematical foundations of Ecological Network Analysis (ENA). While ENA metrics have previously found application in designing circular economies, particularly in Industrial Symbiosis (IS) networks, our adaptation tailors these metrics for use in product-level CE, recognizing the inherent distinctions between product-level CE and IS. Our Eco-inspired Framework comprises three key categories to provide holistic and granular-level metrics for designing product-level CE. The first set of metrics assesses circularity and resource efficiency. The second set gauges network intensity and robustness as complementary indicators ensuring a CE is both sustainable and resilient. The third group of metrics evaluates enhancement potential of CE strategies through introducing quantitative metrics for measuring the degree of closed-loop strategies and average circularity level of a CE design. The three comprehensive set of indicators within the Eco-inspired Framework uniquely captures various facets of circular design, whether originating from technological innovations and recovery improvement at the end of life (EoL), shifts in human consumption patterns, alterations in product design, or changes in business models. The framework’s application is tested in designing a CE for multilayer Polyethylene-Polyamide (PE-PA) films. Using the Eco-inspired Framework, we identified the best strategy for designing a resilient and sustainable CE for PE-PA films. A diverse set of EoL strategies along with a reduction in product consumption can improve circularity and resilience by 650% and 255%, respectively, and mitigate greenhouse gas emissions by 90%. The framework minimizes trade-offs between sustainability and circularity goals and offers insights on how to enhance each strategy for achieving a resilient and sustainable CE for products.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Thermal Oxo-degradation and Catalytic Upgrading of Plastic Waste to Light Olefins for a Circular Economy

The commercialization of conventional pyrolysis of plastic in an inert atmosphere has been hindered by large thermal requirements stemming from long reaction rates. The rate of thermal depolymerization of waste plastics can be accelerated by the addition of oxygen in a process known as thermal oxo-degradation (TOD). This study offers the prospect of TOD to upcycle postconsumer waste rapidly and efficiently. Using moderate temperatures and small amounts of air in a fluidized bed reactor, we demonstrated that waste high-density polyethylene and polypropylene are rapidly deconstructed to condensable products. These condensable products were catalytically upgraded in a micropyrolysis reactor using commercially available zeolite (HZSM-5) to monomeric olefins. The olefin yields proved to be greater than those achieved through the catalytic upgrading of condensable products from (nonoxidative) the pyrolysis of the same plastic wastes. The coupling of TOD with catalytic upgrading proves to be an energy-efficient pathway in a plastics circular economy for the production of light olefins from wastes.

Enthalpy↗
DOE OSTI2021

Plastic waste upcycling toward a circular economy

Large amounts of plastics are discarded worldwide each year, leading to a significant mass of waste in landfills and pollution to soil, air, and waterways. Upcycling is an efficient way to transform plastic waste into high-value products and can significantly lessen the environmental impact of plastic production/consumption. In this article, current advances and future directions in plastic waste upcycling technologies are discussed. In particular, this review focuses on the production of high-value materials from plastic waste conversion methods, including pyrolysis, gasification, photoreforming, and mechanical reprocessing. Plastic waste compositions, conversion products, reaction mechanisms, catalyst selection, conversion efficiencies, polymer design, and polymer modification are also explored. Furthermore, the main challenges facing the adoption and scale-up of these technologies are highlighted. Suggestions are given for focusing future research and development to increase the efficiency of upcycling practices.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Optimal Design of Food Packaging Considering Waste Management Technologies to Achieve Circular Economy

Plastic packaging plays a fundamental role in the food industry, avoiding food waste and facilitating food access. The increasing plastic production and the lack of appropriate plastic waste management technologies represent a threat to the environmental and human welfare. Therefore, there is an urgent need to identify sustainable packaging solutions. Circular economy (CE) promotes reducing waste and increasing recycling practices to achieve sustainability. In this work, we propose a CE framework based on multi-objective optimization, considering both economic and environmental impacts, to identify optimal packaging designs and waste management technologies. Using mixed-integer linear programming (MILP), techno-economic analysis (TEA), and life cycle assessment (LCA), this work aims to build the first steps in packaging design, informing about the best packaging alternatives and the optimal technology or technologies to process packaging waste. For the economic analysis, we consider the minimum increase in price (MIP) when adding recycling to the cost of each packaging solution, while for the environmental analysis, the greenhouse gas emissions impact was considered. A case study on ground coffee packaging is used to illustrate the proposed framework. The results demonstrate that the multilayer bag option is the most convenient when considering both the chosen economic and environmental impacts.

Life Cycle Analysis↗