Search NASA⌕ Search

SEARCH · Search NASA

Results for “plastic waste”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Non-equilibrium plasma co-upcycling of waste plastics and CO 2 for carbon-negative oleochemicals

Mechanical recycling and chemical upcycling by thermochemical reactions have been the major approaches for recycling end-of-life plastics. Herein, we report an electrified approach to upcycle waste plastics into carbon-negative commodity chemicals using greenhouse gas CO 2 as the oxidant and additional carbon source. In this non-equilibrium plasma process, waste polyolefins were oxidatively depolymerized by plasma-activated CO 2 to produce oleochemicals and hydrocarbon chemicals in a single-step process at high reaction rates. In addition, a mixture of CO 2 and a small amount of O 2 was employed as plasma gases to selectively produce fatty alcohols from polyolefins. Based on this atmospheric pressure, non-solvent, and non-catalyst process, up to 97.6% of fatty alcohols could be produced within minutes. In this article, the co-conversion approach was demonstrated using common polyolefins and real-world mixed waste plastics to obtain comparable results. The techno-economic analysis estimates the internal rate of return to be 42.2% and 43.5% for the plasma-based conversion of waste plastics, depending on the plasma gas composition. Lifecycle assessment indicates the global warming potential is between −3.33 and −3.07 kg CO 2e per kg of plastic.

42 ENGINEERING↗
DOE OSTI2021

Synthetic Lubricants Derived from Plastic Waste and their Tribological Performance

The energy efficiency, mechanical durability, and environmental compatibility of all moving machine components rely heavily on advanced lubricants for smooth and safe operation. Herein an alternative family of high-quality liquid (HQL) lubricants was derived by the catalytic conversion of pre- and post-consumer polyolefin waste. The plastic-derived lubricants performed comparably to synthetic base oils such as polyalphaolefins (PAOs), both with a wear scar volume (WSV) of 7.5×10 -5 mm -3 . HQLs also performed superior to petroleum-based lubricants such as Group III mineral oil with a WSV of 1.7×10 -4 mm -3 , showcasing a 44% reduction in wear. Furthermore, a synergistic reduction in friction and wear was observed when combining the upcycled plastic lubricant with synthetic oils. Additionally, life cycle and techno-economic analyses also showed this process to be energetically efficient and economically feasible. This novel technology offers a cost-effective opportunity to reduce the harmful environmental impact of plastic waste on our planet and to save energy through reduction of friction and wear-related degradations in transportation applications akin to synthetic oils.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Chemical Recycling of Plastic Waste to Higher Value Lubricants

The aim of this project was to develop scalable methods to convert plastic waste to petrochemical-equivalent feedstocks and demonstrate their utility in lubricant base oil and wax applications. These objectives were partially accomplished, by scaling up the synthesis of platinum-on-strontium titanate catalysts to twenty gram batches, scaling up the conversion of plastic waste to twenty-five grams of plastic, producing high-melt waxes and characterizing their properties, and demonstrating the purification of high-melt waxes. High-melt waxes are one petrochemical-equivalent feedstock that can be made from plastic waste, consisting of a hard wax with a melt point above 65 C. They are used as ingredients in hot melt adhesives, coatings, and cosmetics. Producing a petrochemical-equivalent feedstock from plastic waste provides an advantage in lower carbon footprint and manufacturing cost, as the waste feedstock costs less than crude oil.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Mixed Plastics Waste Valorization through Tandem Chemical Oxidation and Biological Funneling

Mixed plastics waste represents an abundant and largely untapped feedstock for the production of valuable products. The chemical diversity and complexity of these materials, however, present major barriers to realizing this opportunity. In this work, we show that metal-catalyzed autoxidation depolymerizes comingled polymers into a mixture of oxygenated small molecules that are advantaged substrates for biological conversion. We engineer a robust soil bacterium, Pseudomonas putida, to funnel these oxygenated compounds into a single exemplary chemical product, either ..beta..-ketoadipate or polyhydroxyalkanoates. This hybrid process establishes a strategy for the selective conversion of mixed plastics waste into useful chemical products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Techno-Economic and Life Cycle Assessment of Chemical Recycling and Upcycling of Mixed Plastics Waste Containing Poly-vinyl-chloride

Developing technologies that completely remove chlorine from plastic waste can allow its chemical recycling and upcycling with catalytic methods. Here, this study compares eight processes involving different dechlorination methods (absorption columns, adsorption in beds of zeolites, catalytic dechlorination, and dissolution in ionic liquids) and chemical conversion technologies (incineration, pyrolysis, hydrogenolysis) to upgrade mixed plastics waste to various products (e.g., electricity, fuels, virgin polymers, and lubricant oil). The analysis determines that the absorption of chlorine in columns with basic aqueous solutions is limited to plastics waste with PVC concentrations below 0.1%. Dissolution in ionic liquids is not cost-competitive. On the contrary, two-step processes with catalytic dechlorination followed by thermochemical catalytic depolymerization, either pyrolysis or hydrogenolysis, significantly improve process economics and emissions. The most economically viable alternative is hydrogenolysis for producing lubricants, while the technology with the lowest global warming potential is chemical recycling via catalytic pyrolysis.

circular economy↗
DOE OSTI2020

Flash Graphene from Plastic Waste

In this work, an approach to upcycling plastic waste (PW) products is presented. The method relies on flash Joule heating (FJH) to convert PW into flash graphene (FG). In addition to FG, the process results in the formation of carbon oligomers, hydrogen, and light hydrocarbons. In order to make high quality graphene, a sequential alternating current (AC) and direct current (DC) flash is used. Here, the FJH process requires no catalyst and works for PW mixtures, which makes the process suitable for handling landfill PW. The energy required to convert PW to FG is ~ 23 kJ/g or ~ $125 in electricity per ton of PW, potentially making this process economically attractive for scale-up. The FG was characterized by Raman spectroscopy and had a I 2D /I G peak ratio up to 6 with a low-intensity D band. Moreover, transmission electron microscopy and X-ray diffraction analysis show that the FG is turbostratic with an interlayer spacing of 3.45 Å. The large interlayer spacing will facilitate its dispersion in liquids and composites. Analysis of FG dispersions in 1% Pluronic aqueous solution shows that concentrations up to 1.2 mg/mL can be achieved. The carbon oligomers that distilled from the process were characterized by Fourier-transform infrared spectroscopy and have chemical structures similar to the starting PW. Initial analysis of gas phase products shows the formation of considerable amounts of hydrogen along with other light hydrocarbons. Since graphene is naturally occurring and it shows a low toxicity profile, this could be an environmentally beneficial method to upcycle PE.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Conversion of plastic waste into high-value lubricants: techno-economic analysis and life cycle assessment

Given the low recycling rate of plastic waste in the United States due to low economic incentives, it is of great interest to develop a technology to upgrade plastic waste with favorable economics. Plastic upcycling to valuable chemicals could ensure a circular economy for plastics and reduce the environmental burden caused by their end use cycle and disposal. A conceptual facility to convert 250 metric ton (MT) per day of plastic waste was modeled; the main product was a high-quality liquid (HQL) with a similar performance to polyalphaolefin (PAO) lubricants. The modeled process had a lubricant yield of up to 90% based on the experimental results at the laboratory scale. Techno-economic analysis (TEA) and life cycle assessment (LCA) were also performed to evaluate the process economics and its environmental impact. By using a mixture of colored and natural high-density polyethylene (HDPE), the production cost was in the range of 0.6–1.98 dollars per kg of lubricant, depending on the operating conditions. The life cycle emissions were in the range of 0.48–1.2 kg CO 2e kg Lub -1 showing, for the best case scenario, a 52% reduction relative to the emissions for petroleum lubricants, and a 74% reduction relative to the emissions for PAO lubricants. Finally, the impacts of the lubricant yield, the catalyst amount, and reaction time were evaluated, and their effect on the final production cost was discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Evaluating the potential of plastic waste upcycling using thermochemical technologies: A case study in Spain

A plastic waste upcycling value chain model has been applied to assess the potential of processing packaging waste in Spain using thermo-chemical technologies to produce low-density polyethylene (LDPE) and polypropylene (PP), which are highly valuable materials. The model projects an annual profit of 120.6 M$\$$/yr, with a capital investment of 789.3 M$\$$, generating 3285 jobs and contributing 65.5 M$\$$/yr to Spain’s economy. The achieved circularity rate of the waste processing infrastructure exceeds 40 %, incorporating recycled HDPE and PET. Despite these advantages, regulatory gaps and market hesitancy toward recycled materials due to quality concerns hinder adoption. Additionally, economies of scale remain underutilized in Spain due to lower plastic waste collection levels compared to countries such as the United States. This network, while less profitable, is environmentally superior, yielding upcycled products with a Global Warming Potential 20–35 % lower than their virgin, fossil-fuel counterparts, confirming this as a viable and sustainable alternative.

Chemical upcycling↗
DOE OSTI2023

Thermodynamic Properties of Aggregate Coated by Different Types of Waste Plastic: Adhesion and Moisture Resistance of Asphalt-Aggregate Systems

The utilization of acidic aggregates in hot-mix asphalt (HMA) is often inevitable due to the limited supply of locally available aggregates, posing a potential threat of moisture damage to asphalt pavements. In this regard, the use of urban waste plastic to coat the low-quality aggregates is a promising way to improve the moisture resistance. This study fundamentally evaluated the compatibility between asphalt and plastic-coated aggregate by measuring surface energy, and for the first time compared the effects of different types of waste plastic including high-density polyethylene (HDPE), low-density polyethylene (LDPE), polyethylene terephthalate (PET), polyvinyl chloride (PVC), and polypropylene (PP). The plastic-coating significantly altered the chemistry of aggregate surface by increasing the nonpolar components and reducing the polar components. Such changes remarkably increased the dry adhesion energy between asphalt and aggregate and enhanced the wettability of aggregate. For the acidic aggregates, the polymeric treatment could decrease the value of wet adhesive, which indicated the debonding tendency in the presence of water was reduced. Finally, the energy ratios of the asphalt-aggregate combinations significantly increased by the surface pretreatment, which proved the effect of waste plastic coating on improving the moisture damage resistance of asphalt mixtures. By comparison, the HDPE coating was the most effective way to enhance the compatibility with asphalt, followed by PP and LDPE coatings. The PVC and PET coatings were investigated as the least effective way. In conclusion, this study cannot only contribute to the potential large-scale utilization of waste plastic but also remove the obstacles of using large quantities of acidic natural aggregate in asphalt pavements.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Plastic Waste Product Captures Carbon Dioxide in Nanometer Pores

We discuss, plastic waste (PW) and increasing atmospheric carbon dioxide (CO 2 ) levels are among the top environmental concerns presently facing humankind. With an ambitious 2050 zero-CO 2 emissions goal, there is a demand for economical CO 2 capture routes. Here we show that the thermal treatment of PW in the presence of potassium acetate yields an effective carbon sorbent with pores width of 0.7–1.4 nm for CO 2 capture. The PW to carbon sorbent process works with single or mixed streams of polyolefin plastics. The CO 2 capacity of the sorbent at 25 °C is 17.0 ± 1.1 wt % (3.80 ± 0.25 mmol g –1 ) at 1 bar and 5.0 ± 0.6 wt % (1.13 ± 0.13 mmol g –1 ) at 0.15 bar, and it regenerates upon reaching 75 ± 5 °C. The CO 2 capture cost from flue gas via this technology is estimated to be <$21 ton –1 CO 2 , much lower than competing CO 2 capture technologies. Hence, this PW-derived carbon material should find utility in the capture of CO 2 from point sources of high CO 2 emissions while providing a use for otherwise deleterious PW.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2026

Closing the loop on plastics: Biological and hybrid routes for converting plastic waste to polyhydroxyalkanoates

Polyhydroxyalkanoate (PHA) production from plastic-derived substrates offers a promising route to mitigate plastic pollution while reducing dependence on conventional PHA feedstocks. Plastic waste represents an abundant carbon source for microbial fermentation, but efficient conversion remains limited by incomplete deconstruction, inhibitory intermediates, low carbon recovery, and challenges in process integration. Plastic-derived streams contain diverse compounds, including fatty acids, hydrocarbons, fatty alcohols, aldehydes, esters, and aromatic compounds generated during depolymerization. These intermediates can be metabolized by selected microorganisms, particularly Pseudomonas species with versatile fatty-acid and hydrocarbon pathways, as well as Cupriavidus necator and mixed microbial cultures. Unlike reviews that address plastic upcycling or PHA biosynthesis separately, this review focuses on the deconstruction–fermentation interface that governs plastic-to-PHA conversion. It consolidates current progress in plastic deconstruction, substrate conditioning, microbial metabolism, fermentation control, polymer recovery, and techno-economic and life-cycle considerations. Here, by emphasizing substrate composition, biological compatibility, plastic‑carbon recovery, and final polymer quality, the review identifies priorities for scalable and environmentally sustainable PHA production from plastic-derived substrates.

42 ENGINEERING↗
DOE OSTI2025

A solvent-targeted recovery and precipitation scheme for the recycling of up to ten polymers from post-industrial mixed plastic waste

Solvent-Targeted Recovery and Precipitation (STRAP TM ) separates polymers within a plastic waste stream by selective dissolution. In this work, the STRAP framework, which combines computational modeling and experiments, was applied to develop a series of steps to separate up to 10 polymers from post-industrial mixed plastic waste (MPW) and the main components recovered were LDPE, HDPE, and PET. The STRAP steps were initially demonstrated with a physical polymer mixture containing LDPE, HDPE, PS, PVC, EVOH, PET, PP, PA6, PA66, and PA66/6, in which recoveries of 89% or higher were achieved for each polymer. Furthermore, this paper demonstrates a solvent selection approach that can be applied to separate unknown plastics materials into purer components.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Converting plastic waste pyrolysis ash into flash graphene

Pyrolysis of plastic waste (PW), a commercial method of recycling, is currently economically challenging and produces up to 20% by mass valueless pyrolysis ash (PA) as a byproduct. Here, direct, facile upcycling of PW-derived PA into high purity turbostratic flash graphene (tFG) is demonstrated. The tFG displays excellent dispersibility, yielding a concentration of 2.84 mg/mL in aqueous surfactant solution. The tFG was used to fabricate tFG-PVA nanocomposites, and low doses of tFG (0.1%–1%) improve failure strain by 15%–30% when compared to the samples of neat PVA. Furthermore, the addition of tFG to PVA films showed decreased hydrophilic interactions, increasing the water contact angle by 235% and adsorbing 500% less water than neat PVA. The tFG was also added to Portland cement paste as well as concrete, and exhibited 43% and 25% increases in compressive strength, respectively. The tFG is used directly in both composite applications, requiring no purification or chemical functionalization, unlike many other products used in nanocomposites.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Converting polycarbonate and polystyrene plastic wastes intoaromatic hydrocarbons via catalytic fast co-pyrolysis

Thermochemical conversion of plastic wastes is a promising approach to produce alternative energy-based fuels. Herein, we conducted catalytic fast co-pyrolysis of polycarbonate (PC) and polystyrene (PS) to generate aromatic hydrocarbons using HZSM-5 (Zeolite Socony Mobil-5, hydrogen, Aluminosilicate) as a catalyst. The results indicated that employing HZSM-5 in the catalytic conversion of PC facilitated the synthesis of aromatic hydrocarbons in comparison to the non-catalytic run. A competitive reaction between aromatic hydrocarbons and aromatic oxygenates was observed within the studied temperature region, and catalytic degradation temperature of 700 °C maximized the competing reaction towards the formation of targeted aromatic hydrocarbons at the expense of phenolic products. Catalyst type also played a vital role in the catalytic decomposition of PC wastes, and HZSM-5 with different Si/Al molar ratios produced more aromatic hydrocarbons than HY (Zeolite Y, hydrogen, Faujasite). Regarding the effect of Si/Al molar ration in HZSM-5 on the distribution of monocyclic aromatic hydrocarbons (MAHs), a Si/Al molar ratio of 38 maximized benzene formation with an advanced factor of 5.1. Catalytic fast co-pyrolysis of PC with hydrogen-rich plastic wastes including polypropylene (PP), polyethylene (PE), and polystyrene (PS) favored the production of MAHs, and PS was the most effective hydrogen donor with a ~2.5-fold increase. The additive effect of MAHs increased at first and then decreased when the PC percentage was elevated from 30 % to 90 %, achieving the maximum value of 32.4 % at 70 % PC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Plastic waste gasification for low-carbon hydrogen production: a comprehensive review

Hydrogen is one of the most important feedstocks for the chemical industry, power production, and the decarbonization of other sectors that rely on natural gas. The production of hydrogen from plastics enables sustainable use of plastic waste and offers significant environmental benefits. Gasification emerges as a promising route for chemical recycling, converting plastic into hydrogen and other valuable chemicals. Although the gasification of plastic waste has recently gained attention, the number of studies regarding low-carbon hydrogen production is still limited. The effective integration of carbon capture, utilization, and storage (CCUS) is essential for achieving low-carbon hydrogen production via gasification, which enables the efficient capture and storage of CO 2 emissions. Incorporating coal waste and biomass into plastic gasification can synergistically enhance reforming reactions for hydrogen production, reduce tar content, and resolve feeding issues caused by plastic stickiness. Based on the previous studies, this paper briefly reviews the mechanisms of plastic gasification including plastic depolymerization, reforming, tar and char formation, and gasification; the discussions on feedstocks and effects of operating conditions on H 2 production including plastic-type, temperature, steam/carbon ratio, equivalence ratio, and catalysts; and the integration of CCUS and alternative recovery processes in plastic gasification for low-carbon hydrogen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Plastic waste upcycling toward a circular economy

Large amounts of plastics are discarded worldwide each year, leading to a significant mass of waste in landfills and pollution to soil, air, and waterways. Upcycling is an efficient way to transform plastic waste into high-value products and can significantly lessen the environmental impact of plastic production/consumption. In this article, current advances and future directions in plastic waste upcycling technologies are discussed. In particular, this review focuses on the production of high-value materials from plastic waste conversion methods, including pyrolysis, gasification, photoreforming, and mechanical reprocessing. Plastic waste compositions, conversion products, reaction mechanisms, catalyst selection, conversion efficiencies, polymer design, and polymer modification are also explored. Furthermore, the main challenges facing the adoption and scale-up of these technologies are highlighted. Suggestions are given for focusing future research and development to increase the efficiency of upcycling practices.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Influence of functional additives, fillers, and pigments on thermal and catalytic pyrolysis of polyethylene for waste plastic upcycling

Pyrolysis offers a relatively green and economical method to convert waste plastics into valuable chemicals and fuels without the need for harmful solvents, toxic chemicals, or costly high-pressure reactors. Despite its popularity among chemical upcycling technologies, industrial adoption suffers from feedstock heterogeneity, low-quality products, and catalyst deactivation. Most plastics in our daily lives are formulated with functional additives, fillers, and colorants. These additives remaining in end-of-life waste streams increase feedstock heterogeneity, creating a challenging issue in recycling plastics. Still, the potential impacts of additives on the chemical upcycling of plastics have been poorly understood. In this study, polyethylene compounded with a range of widely used additives (antioxidants, stabilizers, pigments, fillers, slip agents, and flame retardants) was subjected to both thermal pyrolysis and catalytic pyrolysis in different catalyst-to-feedstock contact modes. It showed that many inorganic additives, such as talc, kaolin, CaCO 3 , TiO 2 , carbon black, and zinc stearate, facilitated polymer decomposition during pyrolysis, increasing light hydrocarbons while also promoting aromatic and carbon residue formation. Conversely, antioxidants and stabilizers inhibited depolymerization, favoring heavier hydrocarbons. During catalytic pyrolysis with HZSM-5 zeolite, additives strongly enhanced aromatic and catalytic coke formation, especially when there was direct contact between plastics and catalysts. Although certain additives seem beneficial in the short term by promoting polymer cracking and improving the selectivity of aromatics, the transport of the additives and their degradation products and increased carbon coking can contaminate products, deactivate or modify catalysts, and foul reactors. These findings address a critical knowledge gap in effectively converting waste plastics via a greener route.

42 ENGINEERING↗