Search NASA⌕ Search

SEARCH · Search NASA

Results for “point cloud analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Cross-Calibration of GNC and OLA LIDAR Systems Onboard OSIRIS-REx

The Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) mission carried two distinct light detection and ranging (LIDAR) systems: A scanning LIDAR called OSIRIS-REx Laser Altimeter (OLA) as part of the science payload, and a flash LIDAR system has part of the Guidance, Navigation, & Control (GNC) subsystem to serve as a navigation sensor during TAG. This presents a unique opportunity to compare the performance of the two LIDAR systems in close proximity to a small asteroid body. During the Orbital B mission phase, between June to August 2019, the OSIRIS-REx spacecraft orbited Bennu in a near-circular terminator orbit during which the altitude above the surface varied between 645 m to 740 m. Over five-week period observations were recorded with the OLA instrument that were subsequently used to construct a global digital terrain map (DTM) with a resolution of 5 cm and accuracy of ±20 cm. This model provides an excellent reference for assessing the performance of the GNC LIDAR system. Two different GNC LIDAR checkout activities were also conducted during the Orbital B phase: A limb-crossing check-out featured a series of slews to collect GNC LIDAR data across varying ranges and phase angles and operate the automatic gain control modes of the device; An OLA-GNC LIDAR cross calibration was designed to collect data from both the OLA and GNC LIDAR devices with overlapping footprints while the spacecraft was pointed nadir. This paper compares the on-orbit performance observed during the cross-calibration activity. The OLA-based global DTM and point clouds are used to evaluate the GNC LIDAR not available during previous analysis. The GNC LIDAR measurements were found to be well within accuracy and precision specified for the instrument, but much noisier than the measurements from OLA within this operating regime.

Jason M Leonard↗

Algorithm for Detection of Ground and Canopy Cover in Micropulse Photon-Counting Lidar Altimeter Data in Preparation for the ICESat-2 Mission

NASA's Ice, Cloud and Land Elevation Satellite-II (ICESat-2) mission is a decadal survey mission (2016 launch). The mission objectives are to measure land ice elevation, sea ice freeboard, and changes in these variables, as well as to collect measurements over vegetation to facilitate canopy height determination. Two innovative components will characterize the ICESat-2 lidar: 1) collection of elevation data by a multibeam system and 2) application of micropulse lidar (photon-counting) technology. A photon-counting altimeter yields clouds of discrete points, resulting from returns of individual photons, and hence new data analysis techniques are required for elevation determination and association of the returned points to reflectors of interest. The objective of this paper is to derive an algorithm that allows detection of ground under dense canopy and identification of ground and canopy levels in simulated ICESat-2 data, based on airborne observations with a Sigma Space micropulse lidar. The mathematical algorithm uses spatial statistical and discrete mathematical concepts, including radial basis functions, density measures, geometrical anisotropy, eigenvectors, and geostatistical classification parameters and hyperparameters. Validation shows that ground and canopy elevation, and hence canopy height, can be expected to be observable with high accuracy by ICESat-2 for all expected beam energies considered for instrument design (93.01%-99.57% correctly selected points for a beam with expected return of 0.93 mean signals per shot (msp), and 72.85%-98.68% for 0.48 msp). The algorithm derived here is generally applicable for elevation determination from photoncounting lidar altimeter data collected over forested areas, land ice, sea ice, and land surfaces, as well as for cloud detection.

Algorithms↗

Understanding the Uncertainty and Variability of Earth’s Radiation Budget Components Over the Past 3 Decades from the NASA’s GEWEX Surface Radiation Budget Release 4 Integrated Product

The NASA/GEWEX Surface Radiation Budget (SRB) project produced a 30+ year time series of 3-hourly Top-of-Atmosphere (TOA) and surface radiative flux components at a 1x1 degree resolution. This SRB Release 4 Integrated Productare derived using imager data products from the cross-calibrated from ISCCP (International Satellite Cloud Climatology Project) “HSeries” radiance, cloud and surface property data products. The ISCCP HXS product replaces ISCCP DX with a ninefold increase in pixel count (10km instead of 30km). ISCCP also provides an atmospheric temperature and moisture dataset known as nnHIRS which we use and discuss radiative flux sensitivities to in this presentation. Total solar irradiance is now variable consistent with SORCE measurements. Sea surface (SeaFlux v2.0) and land surface products (LandFlux) are utilized to achieve an radiative flux estimatesintegrated with global data sets from these GEWEX projects. The variable aerosol composition are specified using a detailed aerosol history from the Max Planck Institute Aerosol Climatology (MAC) also used for background aerosol in the ISCCP HX. Numerous other improvements were made to the SW and LW algorithms including improved cloud optical property treatments and specification of surface spectral albedo and emissivity for various surface conditions. Here we analyze the new SWand LWSRB datasets, comparing them to the previous Release 3, BSRN, GEBA and PMEL surface measurements, and ERBE and CERES satellite datasets. For surface flux validation besides ensemble comparisons, we show the variability of SRB vs surface measurements from BSRN beginning in 1992 and GEBA SW from 1983. We assess the variability of the surface flux anomalies, particularly the net fluxes and the cloud radiative effects, over the entire time period including the period containing CERES overlap. For the TOA fluxes, the anomalies of the fluxes in the early period are compared to the MEaSURES ERBE and the latter period to CERES EBAF/SYN1Deg datasets for a benchmark. Long-term changes in the surface radiation budget components and cloud radiative effects are shown and discussed relative to CERES and surface measurements. This includes a change point analysis that helps associate various changes in the ISCCP GEO/LEO configurations and other inputs to variations in the radiative budget components.

Earth Radiation Budget↗

Star Formation In Nearby Clouds (SFiNCs): X-Ray and Infrared Source Catalogs and Membership

The Star Formation in Nearby Clouds (SFiNCs) project is aimed at providing a detailed study of the young stellar populations and of star cluster formation in the nearby 22 star-forming regions (SFRs) for comparison with our earlier MYStIX survey of richer, more distant clusters. As a foundation for the SFiNCs science studies, here, homogeneous data analyses of the Chandra X-ray and Spitzer mid-infrared archival SFiNCs data are described, and the resulting catalogs of over 15,300 X-ray and over 1,630,000 mid-infrared point sources are presented. On the basis of their X-ray/infrared properties and spatial distributions, nearly 8500 point sources have been identified as probable young stellar members of the SFiNCs regions. Compared to the existing X-ray/mid-infrared publications, the SFiNCs member list increases the census of YSO members by 6%–200% for individual SFRs and by 40% for the merged sample of all 22 SFiNCs SFRs.

79 ASTRONOMY AND ASTROPHYSICS↗

Unsupervised Change Detection for Space Habitats Using 3D Point Clouds

This work presents an algorithm for scene change detection from point clouds to enable autonomous robotic caretaking in future space habitats. Autonomous robotic systems will help maintain future deep-space habitats, such as the Gateway space station, which will be uncrewed for extended periods. Existing scene analysis software used on the International Space Station (ISS) relies on manually-labeled images for detecting changes. In contrast, the algorithm presented in this work uses raw, unlabeled point clouds as inputs. The algorithm first applies modified Expectation-Maximization Gaussian Mixture Model (GMM) clustering to two input point clouds. It then performs change detection by comparing the GMMs using the Earth Mover’s Distance. The algorithm is validated quantitatively and qualitatively using a test dataset collected by an Astrobee robot in the NASA Ames Granite Lab comprising single frame depth images taken directly by Astrobee and full-scene reconstructed maps built with RGB-D and pose data from Astrobee. The runtimes of the approach are also analyzed in depth. The source code is publicly released to promote further development.

robotics↗

Real-time kinematic (RTK) Drone-collected Data and Processed Models of Port Arthur Coastal Neighborhood and Pleasure Island Golf Course, June 2024

The Southeast Texas Urban Integrated field lab’s Co-design team captured aerial photos in the Port Arthur Coastal Neighborhood Community and the Golf Course on Pleasure Island, Texas, in June 2024. Aerial photos taken were through autonomous flight, and models were processed through the DroneDeploy engine. All aerial photos are in .JPG format and contained in zipped files for each area. The processed data package includes 3D models, geospatial data, mappings, and point clouds. Please be aware that DTM, Elevation toolbox, Point Cloud, and Orthomosaic use EPSG: 6588. And 3D Model uses EPSG: 3857.For using these data:- The Adobe Suite gives you great software to open .Tif files.- You can use LASUtility (Windows), ESRI ArcGIS Pro (Windows), or Blaze3D (Windows, Linux) to open a LAS file and view the data it contains.- Open an .OBJ file with a large number of free and commercial applications. Some examples include Microsoft 3D Builder, Apple Preview, Blender, and Autodesk.- You may use ArcGIS, Merkaartor, Blender (with the Google Earth Importer plug-in), Global Mapper, and Marble to open .KML files.- The .tfw world file is a text file used to georeference the GeoTIFF raster images, like the orthomosaic and the DSM. You need suitable software like ArcView to open a .TFW file.This dataset provides researchers with sufficient geometric data and the status quo of the land surface at the locations mentioned above. This dataset will support researchers' decision-making processes under uncertainties.

2D mapping↗

Aerial Data and Processed Models of Port Arthur Coastal Neighborhood and Pleasure Island Golf Course, June 2024

Our Co-design team is from the University of Texas, working on a Department of Energy-funded project focused on the Beaumont-Port Arthur area. As part of this project, we will be developing climate-resilient design solutions for areas of the region. More on www.caee.utexas.edu.We captured aerial photos in the Port Arthur Coastal Neighborhood Community and the Golf Course on Pleasure Island, Texas, in June 2024.Aerial photos taken were through DroneDeploy autonomous flight, and models were processed through the DroneDeploy engine as well. All aerial photos are in .JPG format and contained in zipped files for each area.The processed data package includes 3D models, geospatial data, mappings, and point clouds. Please be aware that DTM, Elevation toolbox, Point cloud, and Orthomosaic use EPSG: 6588. And 3D Model uses EPSG: 3857.For using these data:- The Adobe Suite gives you great software to open .Tif files.- You can use LASUtility (Windows), ESRI ArcGIS Pro (Windows), or Blaze3D (Windows, Linux) to open a LAS file and view the data it contains.- Open an .OBJ file with a large number of free and commercial applications. Some examples include Microsoft 3D Builder, Apple Preview, Blender, and Autodesk.- You may use ArcGIS, Merkaartor, Blender (with the Google Earth Importer plug-in), Global Mapper, and Marble to open .KML files.- The .tfw world file is a text file used to georeference the GeoTIFF raster images, like the orthomosaic and the DSM. You need suitable software like ArcView to open a .TFW file.This dataset provides researchers with sufficient geometric data and the status quo of the land surface at the locations mentioned above. This dataset could streamline researchers' decision-making processes and enhance the design as well.

2D mapping↗

Quantifying vegetation and canopy structural complexity from terrestrial LiDAR data using the FORESTR R package

Terrestrial LiDAR (light detection and ranging) technologies have created new means of quantifying forest canopy structure, allowing not only the estimation of biomass, but also descriptions of the position and variability in canopy elements in space. Such measures provide novel structural information broadly useful to ecologists. There is a growing need for both a detailed taxonomy of forest canopy structural complexity (CSC) and open, transparent, and flexible tools to quantify complexity in ways that will advance foundational ecological knowledge of structure-function relationships. The CSC taxonomy we present groups structural descriptors into five categories: leaf area and density, canopy height, canopy arrangement, canopy openness, and canopy variability. This paper also introduces the r package forestr, the first open-source r package for the calculation of CSC metrics from terrestrial LiDAR data. The r package forestr is an analysis toolbox that works with portable canopy LiDAR (PCL) data and other pixelated/voxelized point clouds derived from terrestrial LiDAR scanning (TLS) data to calculate CSC metrics of interest to ecologists, modellers, forest managers, and remote sensing scientists.

52 ecosystem↗

Tuning the Performance of a Computational Persistent Homology Package

In recent years, persistent homology has become an attractive method for data analysis. It captures topological features, such as connected components, holes, and voids from point cloud data and summarizes the way in which these features appear and disappear in a filtration sequence. In this project, we focus on improving the performanceof Eirene, a computational package for persistent homology. Eirene is a 5000-line open-source software library implemented in the dynamic programming language Julia. We use the Julia profiling tools to identify performance bottlenecks and develop novel methods to manage them, including the parallelization of some time-consuming functions on multicore/manycore hardware. Empirical results show that performance can be greatly improved.

Persistent Homology↗

Aerosol variability, synoptic‐scale processes, and their link to the cloud microphysics over the northeast Pacific during MAGIC

Abstract Shipborne aerosol measurements collected from October 2012 to September 2013 along 36 transects between the port of Los Angeles, California (33.7°N, 118.2°), and Honolulu, Hawaii (21.3°N, 157.8°W), during the Marine ARM GPCI (Global Energy and Water Cycle Experiment (GEWEX)‐Cloud System Study (GCSS)‐Pacific Cross‐section Intercomparison) Investigation of Clouds campaign are analyzed to determine the circulation patterns that modulate the synoptic and monthly variability of cloud condensation nuclei (CCN) in the boundary layer. Seasonal changes in CCN are evident, with low magnitudes during autumn/winter, and high CCN during spring/summer accompanied with a characteristic westward decrease. CCN monthly evolution is consistent with satellite‐derived cloud droplet number concentration N d from the Moderate Resolution Imaging Spectroradiometer. One‐point correlation ( r ) analysis between the 1000 hPa zonal wind time series over a region between 125°W and 135°W, 35°N and 45°N, and the N d field yields a negative r (up to −0.55) over a domain that covers a zonal extent of at least 20° from the California shoreline, indicating that N d decreases when the zonal wind intensifies. The negative r expands southwestward as the zonal wind precedes N d by up to 3 days, suggesting a transport mechanism from the coast of North America mediated by the California low‐coastal jet, which intensifies in summer when the aerosol concentration and N d reach a maximum. A first assessment of aerosol‐cloud interaction (ACI) is performed by combining CCN and satellite N d values from the Fifteenth Geostationary Operational Environmental Satellite. The CCN‐ N d correlation is 0.66–0.69, and the ACI metric defined as ACI = ∂ln( N d )/∂ln(CCN) is high at 0.9, similar to other aircraft‐based studies and substantially greater than those inferred from satellites and climate models.

Painemal, David↗

Multi-View, Deep Learning, and Contextual Analysis: Promising Approaches for sUAS Land Cover Classification

Small Unmanned Aircraft System (sUAS) image collection and preprocessing to produce orthoimages, point clouds, and digital surface models have made great leaps forward in the past years. These advances and the wide spectrum of existing and emerging sUAS applications mandate parallel improvements in the algorithms used for image classification that take into consideration the specific characteristics of sUAS imagery. This chapter presents several alternative approaches to improve classification accuracy using redundant information in overlapped sUAS imagery captured in a typical sUAS mission. These include Deep Convolution Neural Network (DCNN) classification, Fully Convolutional Neural (FCN) Network, and contextual relationships under an Object-Based Image Analysis (OBIA) framework. The chapter synthesizes the results of implementing the introduced classification approaches using a case study of high-resolution sUAS images captured in a wetland area in Central Florida.

Liu, Tao↗

An Algorithm for Detection of Ground and Canopy Cover in Micropulse Photon-Counting Lidar Altimeter Data in Preparation of the ICESat-2 Mission

The Ice, Cloud and Land Elevation Satellite-II (ICESat-2) mission has been selected by NASA as a Decadal Survey mission, to be launched in 2016. Mission objectives are to measure land ice elevation, sea ice freeboard/ thickness and changes in these variables and to collect measurements over vegetation that will facilitate determination of canopy height, with an accuracy that will allow prediction of future environmental changes and estimation of sea-level rise. The importance of the ICESat-2 project in estimation of biomass and carbon levels has increased substantially, following the recent cancellation of all other planned NASA missions with vegetation-surveying lidars. Two innovative components will characterize the ICESat-2 lidar: (1) Collection of elevation data by a multi-beam system and (2) application of micropulse lidar (photon counting) technology. A micropulse photon-counting altimeter yields clouds of discrete points, which result from returns of individual photons, and hence new data analysis techniques are required for elevation determination and association of returned points to reflectors of interest including canopy and ground in forested areas. The objective of this paper is to derive and validate an algorithm that allows detection of ground under dense canopy and identification of ground and canopy levels in simulated ICESat-2-type data. Data are based on airborne observations with a Sigma Space micropulse lidar and vary with respect to signal strength, noise levels, photon sampling options and other properties. A mathematical algorithm is developed, using spatial statistical and discrete mathematical concepts, including radial basis functions, density measures, geometrical anisotropy, eigenvectors and geostatistical classification parameters and hyperparameters. Validation shows that the algorithm works very well and that ground and canopy elevation, and hence canopy height, can be expected to be observable with a high accuracy during the ICESat-2 mission. A result relevant for instrument design is that even the two weaker beam classes considered can be expected to yield useful results for vegetation measurements (93.01-99.57% correctly selected points for a beam with expected return of 0.93 mean signals per shot (msp9) and 72.85% - 98.68% for 0.48 msp (msp4)). Resampling options affect results more than noise levels. The algorithm derived here is generally applicable for analysis of micropulse lidar altimeter data collected over forested areas as well as other surfaces, including land ice, sea ice and land surfaces.

Herzfeld, Ute C.↗

Performance Enhancement of a Computational Persistent Homology Package

In recent years, persistent homology has become an attractive method for data analysis. It captures topological features, such as connected components, holes, voids, etc., from a point cloud by finding out when these features appear and disappear in the filtration sequence. In this project, we focus on improving the performance of Eirene, a fancy computational persistent homology package. Eirene is a 5000-line opensource software implemented by using the dynamic programming language Julia. We use the Julia profiling tools to identify the performance bottlenecks and develop different methods to manage the bottlenecks, including the parallelization of some time-consuming functions on the multicore/manycore hardware. The empirical results show that the performance can be greatly improved.

Profiling↗

Detection of Outliers in LiDAR Data Acquired by Multiple Platforms over Sorghum and Maize

High-resolution point cloud data acquired with a laser scanner from any platform contain random noise and outliers. Therefore, outlier detection in LiDAR data is often necessary prior to analysis. Applications in agriculture are particularly challenging, as there is typically no prior knowledge of the statistical distribution of points, plant complexity, and local point densities, which are crop-dependent. The goals of this study were first to investigate approaches to minimize the impact of outliers on LiDAR acquired over agricultural row crops, and specifically for sorghum and maize breeding experiments, by an unmanned aerial vehicle (UAV) and a wheel-based ground platform; second, to evaluate the impact of existing outliers in the datasets on leaf area index (LAI) prediction using LiDAR data. Two methods were investigated to detect and remove the outliers from the plant datasets. The first was based on surface fitting to noisy point cloud data via normal and curvature estimation in a local neighborhood. The second utilized the PointCleanNet deep learning framework. Both methods were applied to individual plants and field-based datasets. To evaluate the method, an F-score was calculated for synthetic data in the controlled conditions, and LAI, the variable being predicted, was computed both before and after outlier removal for both scenarios. Results indicate that the deep learning method for outlier detection is more robust than the geometric approach to changes in point densities, level of noise, and shapes. The prediction of LAI was also improved for the wheel-based vehicle data based on the coefficient of determination (R2) and the root mean squared error (RMSE) of the residuals before and after the removal of outliers.

36 MATERIALS SCIENCE↗

Entwine Point Tiles for 3D Visualization and Querying of ICESat-2

Point Cloud data from non-optical sensors present challenges in scientific computing in both volume of data and files, even for cloud services environments. As part of the Multi-Mission Algorithm and Analysis Platform (MAAP), a joint open science platform for global biomass modelling, we’ve developed a cloud optimized workflow for using ATL08 (ICESat-2) data as a point cloud. For MAAP, the ATL08 data product is published as Entwine Point Tiles (EPT), allowing users to visualize and query the full extent of this collection interactively without pre-downloading, or preprocessing. The EPT format is a cloud-optimized point cloud data format which re-organizes points into a cloud friendly spatially indexed data structure. MAAP uses AWS S3 to store these point clouds and serves them over OGC specified APIs, 3DTiles for visualization, and WFS for querying. This workflow allows for interactive 3D visualizations in a web browser, including notebook environments and facilitates on the fly subsetting for interactive data exploration, all of which can be applied to other similar sensors.

Alex Mandel↗

SWIFT X-RAY OBSERVATIONS OF CLASSICAL NOVAE. II. THE SUPER SOFT SOURCE SAMPLE

The Swift gamma-ray burst satellite is an excellent facility for studying novae. Its rapid response time and sensitive X-ray detector provides an unparalleled opportunity to investigate the previously poorly sampled evolution of novae in the X-ray regime. This paper presents Swift observations of 52 Galactic/Magellanic Cloud novae. We included the X-Ray Telescope (0.3-10 keV) instrument count rates and the UltraViolet and Optical Telescope (1700-8000 A) filter photometry. Also included in the analysis are the publicly available pointed observations of 10 additional novae the X-ray archives. This is the largest X-ray sample of Galactic/Magellanic Cloud novae yet assembled and consists of 26 novae with Super Soft X-ray emission, 19 from Swift observations. The data set shows that the faster novae have an early hard X-ray phase that is usually missing in slower novae. The Super Soft X-ray phase occurs earlier and does not last as long in fast novae compared to slower novae. All the Swift novae with sufficient observations show that novae are highly variable with rapid variability and different periodicities. In the majority of cases, nuclear burning ceases less than three years after the outburst begins. Previous relationships, such as the nuclear burning duration versus t{sub 2} or the expansion velocity of the eject and nuclear burning duration versus the orbital period, are shown to be poorly correlated with the full sample indicating that additional factors beyond the white dwarf mass and binary separation play important roles in the evolution of a nova outburst. Finally, we confirm two optical phenomena that are correlated with strong, soft X-ray emission which can be used to further increase the efficiency of X-ray campaigns.

79 ASTRONOMY AND ASTROPHYSICS↗

Aerosol Complexity and Implications for Predictability and Short-Term Forecasting

There are clear NWP and climate impacts from including aerosol radiative and cloud interactions. Changes in dynamics and cloud fields affect aerosol lifecycle, plume height, long-range transport, overall forcing of the climate system, etc. Inclusion of aerosols in NWP systems has benefit to surface field biases (e.g., T2m, U10m). Including aerosol affects has impact on analysis increments and can have statistically significant impacts on, e.g., tropical cyclogenesis. Above points are made especially with respect to aerosol radiative interactions, but aerosol-cloud interaction is a bigger signal on the global system. Many of these impacts are realized even in models with relatively simple (bulk) aerosol schemes (approx.10 -20 tracers). Simple schemes though imply simple representation of aerosol absorption and importantly for aerosol-cloud interaction particle-size distribution. Even so, more complex schemes exhibit a lot of diversity between different models, with issues such as size selection both for emitted particles and for modes. Prospects for complex sectional schemes to tune modal (and even bulk) schemes toward better selection of size representation. I think this is a ripe topic for more research -Systematic documentation of benefits of no vs. climatological vs. interactive (direct and then direct+indirect) aerosols. Document aerosol impact on analysis increments, inclusion in NWP data assimilation operator -Further refinement of baseline assumptions in model design (e.g., absorption, particle size distribution). Did not get into model resolution and interplay of other physical processes with aerosols (e.g., moist physics, obviously important), chemistry

Predictability↗

Launch window definition for sky target experiments.

This paper is a brief report on the computer program developed for the Extraterrestrial Physics Barium Ion Cloud (BIC) Project. The mathematical analysis developed for the program along with its programing characteristics are pointed out to show that this program is adaptable to similar sky target projects. Definite viewing constraints are specified so that the chosen ground tracking stations can photograph the behavior of the sky target after its release. Viewing factors include the illumination of the target by the sun, the relative elevation look angle to the target from each tracking station, the solar and lunar depression angles at each tracking station, and the total sky background brightness of the target relative to each tracking station. Numeric values are assigned to each factor through program input. The program output is flexible so that the results of the window calculations can be studied to the depth required.

Michaud, N. H.↗