Search NASA⌕ Search

SEARCH · Search NASA

Results for “polymer membranes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Single‐Step Recovery of Water from Stable Crude Oil‐Water Emulsion Using Surface Engineered Hybrid Inorganic‐Polymer Membranes

ABSTRACT Separating crude oil from water remains one of the most stubborn challenges in environmental remediation, especially for surfactant‐stabilized emulsions that resist conventional demulsification methods. Here, we report a scalable strategy for achieving near‐zero‐discharge separation of crude oil emulsions using a single superhydrophilic membrane. By applying low‐temperature atomic layer deposition (ALD) of various metal oxides onto activated polyvinylidene fluoride (PVDF) membranes, we create atomically precise surface‐engineered (SE) membranes that maintain an exceptionally strong hydration layer at the membrane‐feed interface, even at high oil loadings. Among the various metal oxides, TiO 2 ‐modified SE membranes exhibit superior interfacial water stability, enabling sustained dewatering of complex crude oil‐water emulsions with >98% separation efficiency and >97% water recovery, compared to only 24.6% water recovery for the pristine membrane. This separation performance surpasses conventional hydrophilic membranes and is comparable to complex Janus channel membrane systems, demonstrating near‐complete emulsion separation using a single membrane. This low‐temperature membrane surface engineering process with atomic‐level precision and potential for scalability via roll‐to‐roll fabrication is promising for industrial‐scale, energy‐efficient water treatment and oil spill remediation applications.

Sengupta, Bratin [Applied Materials Division Argon↗
DOE OSTI2023

Photo-actuators via epitaxial growth of microcrystal arrays in polymer membranes

Photomechanical crystals composed of three-dimensionally ordered and densely packed photochromes hold promise for high-performance photochemical actuators. However, bulk crystals with high structural ordering are severely limited in their flexibility, resulting in poor processibility and a tendency to fragment upon light exposure, while previous nano- or microcrystalline composites have lacked global alignment. Here we demonstrate a photon-fuelled macroscopic actuator consisting of diarylethene microcrystals in a polyethylene terephthalate host matrix. These microcrystals survive large deformations and show a high degree of three-dimensional ordering dictated by the anisotropic polyethylene terephthalate, which critically also has a similar stiffness. Overall, these ordered and compliant composites exhibit rapid response times, sustain a performance of over at least hundreds of cycles and generate work densities exceeding those of single crystals. In conclusion, our composites represent the state-of-the-art for photochemical actuators and enable properties unattainable by single crystals, such as controllable, reversible and abrupt jumping (photosalient behaviour).

36 MATERIALS SCIENCE↗
DOE OSTI2022

Machine learning enables interpretable discovery of innovative polymers for gas separation membranes

Polymer membranes perform innumerable separations with far-reaching environmental implications. Despite decades of research, design of new membrane materials remains a largely Edisonian process. To address this shortcoming, we demonstrate a generalizable, accurate machine learning (ML) implementation for the discovery of innovative polymers with ideal performance. Specifically, multitask ML models are trained on experimental data to link polymer chemistry to gas permeabilities of He, H 2 , O 2 , N 2 , CO 2 , and CH 4 . We interpret the ML models and extract valuable insights into the contributions of different chemical moieties to permeability and selectivity. We then screen over 9 million hypothetical polymers and identify thousands that lie well above current performance upper bounds, including hundreds of never-before-seen ultrapermeable polymer membranes with O 2 and CO 2 permeability greater than 10 4 and 10 5 Barrers, respectively. High-fidelity molecular dynamics simulations confirm the ML-predicted gas permeabilities of the promising candidates, which suggests that many can be translated to reality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Nanoporous Iridium Nanosheets for Polymer Electrolyte Membrane Electrolysis

The growth of the hydrogen economy is predicated on advancements in electrochemical energy technologies, with water electrolysis as a key component to the technological portfolio. Much of the focus on anode catalyst development for polymer electrolyte membrane water electrolyzers (PEMWE) is centered on activity as controlled by compositional and morphological impacts on reactant/intermediate/product adsorption. However, the effectiveness of this strategy is found to be limited upon integration of these materials into PEMWE membrane electrode assemblies (MEA). Regardless of catalyst activity, the combination of electrode inhomogeneity, ionomer integration, and high density of oxide-oxide interfaces yields significant performance losses associated with poor catalytic electrode conductivity. Here many of these limitations are addressed through the development of a unique catalyst morphology composed of nanoporous Ir nanosheets (npIr(x)-NS) that exhibit high catalytic activity for the anodic oxygen evolution reaction and superior electrode electronic conductivity in comparison to a commercial IrO2 nanoparticle catalyst. The utility of the npIr(x)-NS is demonstrated through incorporation into PEMWE MEAs where their performance exceeds that of commercial catalyst coated membranes at loadings as low as 0.06 mg(Ir) cm(-2) while exhibiting a negligible loss in performance following 50 000 accelerated stress test cycles.

Polymer Electrolyte Membrane Electrolysis↗
DOE OSTI2023

Thermally-rearranged polymer blends for gas separation membranes

Polymer blends comprising an ortho-functionalized polyimide homo or copolymer and a polybenzimidazole homo or copolymer, wherein the ortho-functionalized polyimide thermally rearranges to a polymer comprising a phenylene heterocyclic group, such as, polybenzoxazole, polybenzothiazole, polybenzimidazole and/or other heterocyclic structure upon heating. Also disclosed are method of forming a polymer blend comprising dissolving an ortho-functionalized polyimide homo or copolymer and a polybenzimidazole homo or copolymer in a solvent, and optional compatibilizer, to form a polymer solution; contacting a support with the polymer solution; and evaporating the solvent to provide a thin layer comprising the polymer blend on the support. Further, methods of heat treating these polymer blends to thermally rearrange the disclosed polyimides are disclosed, as are the polymer blends prepared thereby. Methods of using these polymer blends to separate gases are also disclosed.

Freeman, Benny D.↗
DOE OSTI2024

Mitigation and Diagnosis of Pin-Hole Formation in Polymer Electrolyte Membrane Fuel Cells

In this work, we implement a calendering technique to flatten stray fibers within the gas diffusion media, thereby mitigating pin-hole formation in the hot-pressed MEAs. We have investigated the influence of calendering on the long-term durability for several types of gas diffusion electrodes (GDEs) using a combined chemical and mechanical accelerated stress test (AST). The calendered MEAs demonstrate an average AST lifetime improvement of 77% relative to the as-fabricated MEAs.

AMR↗
DOE OSTI2021

Visualization, understanding, and mitigation of process-induced-membrane irregularities in gas diffusion electrode-based polymer electrolyte membrane fuel cells

Polymer electrolyte membrane fuel cells (PEMFC) show substantial promise for their application in electric vehicles. For large-scale manufacturing of PEMFCs, roll-to-roll coated gas-diffusion-electrodes (GDE) offer certain advantages over other production pathways. Procedures including hot pressing and coating an ionomer overlayer may be necessary for this manufacturing pathway to enable a suitable catalyst layer/membrane interface. The same procedures may potentially introduce membrane irregularities, especially when thin membranes are used. Limited understanding exists regarding if and to what extent such irregularities impact PEMFC performance and lifetime, and therefore be considered defects. In this study, NREL's customized fuel cell hardware that enables quasi in-situ infrared (IR) thermography studies was utilized to visualize spatial hydrogen crossover and identify membrane irregularities that originated from the GDE-based MEA fabrication process. The structure of these membrane irregularities was investigated by scanning electron microscopy (SEM) and its impact on initial H2/air performance was determined. Accelerated stress testing (AST) revealed that these irregularities develop into failure point locations. These results were validated across many MEAs with identified process-induced membrane irregularities. By selecting specific gas diffusion media properties and by fine tuning the MEA hot pressing parameters, the formation of such membrane irregularities was mitigated.

08 HYDROGEN↗
DOE OSTI2022

Ultra‐Thin Single‐Particle‐Layer Sodium Beta‐Alumina‐Based Composite Polymer Electrolyte Membrane for Sodium‐Metal Batteries

Inorganic/organic composite polymer electrolytes (CPEs) with good flexibility and electrode contact have been pursued for solid-state sodium-metal batteries. However, the application of CPEs for high energy density solid-state sodium-metal batteries is still limited by the low Na + conductivity, large thickness, and low ion transference number. Herein, an ultra-thin single-particle-layer (UTSPL) composite polymer electrolyte membrane with a thickness of ≈20 µm straddled by a sodium beta-alumina ceramic electrolyte (SBACE) is presented. A ceramic Na + -ion electrolyte that bridges or percolates across an ultra-thin and flexible polymer membrane provides: 1) the strength and flexibility from the polymer membrane, 2) excellent electrolyte/electrode interfacial contact, and 3) a percolation path for Na + -ion transfer. Owing to this novel design, the obtained UTSPL-35SBACE membrane exhibits a high Na+-ion conductivity of 0.19 mS cm -1 and a transference number of 0.91 at room temperature, contributing to long-term cycling stability of symmetric sodium cells with a small overpotential. The assembled quasi-solid-state cell with the as-prepared UTSPL-35SBACE membrane displays superior cycling performance with a discharge capacity of 105 mAh g -1 at 0.5 °C rate after 100 cycles and excellent rate performance (82 mAh g -1 at 5 °C rate) at room temperature with the potassium manganese hexacyanoferrate (KMHCF)@CNTs/CNFs cathode, where KMHCF refers to potassium manganese hexacyanoferrate.

25 ENERGY STORAGE↗
DOE OSTI2023

Highly tunable structure-by-design polymer brush membranes for organic solvent nanofiltration

Synthetic polymeric nanofiltration membrane processes offer an alternate low-energy option to energy-intensive distillation to fractionate similar size organic solvents for chemical, petroleum, food and biotechnology industries. Here, in this study, we synthesize and test a new class of structure-by-design hydrophilic polymeric brush membranes, that address the limitations of commercial polymer membranes, are tunable and exhibit commercially relevant filtration performance. Because these brush membranes are grafted by Single Electron Transfer-Living Radical Polymerization (SET-LRP) and replace statistically random phase inversion or interfacial polymerization used for synthesizing commercial polymer membranes, their porous structure can be remodeled by varying their morphology and chemistry. We graft hydroxyethyl methacrylate (HEMA) brush structures with short and long crosslinkers, demonstrate two competing phenomena - pore stiffening and opening - and obtain high selectivity at reasonable permeability for commercially relevant methanol/toluene separation. This new class of stable, tunable, and scalable membranes offers exciting opportunities to reduce energy for separation of organic solvents.

42 ENGINEERING↗
DOE OSTI2025

The Effects of Morphology and Hydration on Anion Transport in Self-Assembled Nanoporous Membranes

Ordered nanoporous polymer membranes offer opportunities for systematically probing the mechanisms of ion transport under confinement and for realizing useful materials for electrochemical devices. Here, we examine the impact of morphology and ion hydration on the transport of hydroxide and bromide anions in nanostructured polymer membranes with 1 nm scale pores. We use aqueous lyotropic self-assembly of an amphiphilic monomer, with a polymerizable surfactant to create direct hexagonal (H I ) and gyroid mesophases. UV-induced cross-linking leads to the formation of nanoporous polymers with water continuous channels. The membranes are mechanically robust and chemically durable, resisting degradation during extended exposure to 1 M NaOH solutions. We use a combination of electrochemical impedance spectroscopy, pulsed-field gradient NMR spectroscopy, and molecular simulations to elucidate anion and water transport. The as-prepared hexagonal systems display higher conductivity and lower activation energies for both anions relative to the gyroid system. When compared at equivalent hydration, however, gyroid and hexagonal membranes show similar activation energies, with nearly identical conductivities at ambient temperatures. Both ionic conductivity and water diffusivity increase with increasing hydration. Here, the water uptake as a function of relative humidity for the hexagonal and gyroid mesophases ultimately dictates the water diffusion and magnitude of the ionic conductivity, with the hexagonal system showing overall higher capacity for hydration and thus faster ion transport. The durability of these materials under aggressive alkaline conditions and their relatively high hydroxide ion conductivity suggest that these nanostructured polymers could be of interest as membranes for alkaline fuel cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Towards deep computer vision for in-line defect detection in polymer electrolyte membrane fuel cell materials

Polymer Electrolyte Membrane (PEM) fuel cells are a promising source of alternative energy. However, their production is limited by a lack of well-established methods for quality control of their constituent materials like the membrane-electrode assembly during roll-to-roll manufacturing. One potential solution is the implementation of deep learning methods to detect unwanted defects through their detection in scanned images. Here we explore the detection of defects like scratches, pinholes, and scuffs in a sample dataset of PEM optical images using two deep learning algorithms: Patch Distribution Modeling (PaDiM) for unsupervised anomaly detection and Faster-RCNN for supervised object detection. Both methods achieve scores on performance metrics (ROC-AUC and PRO-AUC for PaDiM and AP for Faster-RCNN) that are comparable to their scores on benchmark datasets. These methods also have the potential to detect a wider range of defects compared to IR thermography and previous optical inspection methods. Overall, deep learning shows promise at detecting relevant defects of interest and has the potential to achieve real-time defect detection.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

One-Component Nanocomposite Membranes from Polymer Grafted Cellulose Nanocrystals

Membrane filtration is an important industrial purification process used to access clean and potable water. The fabrication of the membranes used in these purification applications often involves expensive and energy-intensive processes that have a large negative impact on the environment. Sustainable alternatives with a high water flux and strong rejection performance are needed to purify water. Here, the focus of this work is to investigate the use of polymer-grafted cellulose nanocrystals (CNCs) in membrane applications. The impact of the polymer grafting density and polymer conformation was investigated and it is shown that by increasing the grafting density of PEG such that it adopts a semidilute polymer brush conformation, the water flux through the membranes could be increased from 3.5 to 2900 L h –1 m –2 for CNC membranes without and with grafted PEG, respectively. These membranes also exhibited rejection performances with molecular weight cutoffs between 62 and 100 kDa for all polymer-grafted samples, consistent with the ultrafiltration regime. Thus, the design of these one-component composite materials can enhance the water permeability of ultrafiltration membranes while maintaining effective selectivity.

cellulose nanocrystals↗