Search NASA⌕ Search

SEARCH · Search NASA

Results for “polymer stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

The Use of Solar Heating and Heat Cured Polymers for Lunar Surface Stabilization

Dust ejecta can affect visibility during a lunar landing, erode nearby coated surfaces and get into mechanical assemblies of in-place infrastructure. Regolith erosion was observed at many of the Apollo landing sites. This problem needs to be addressed at the beginning of the lunar base missions, as the amount of infrastructure susceptible to problems will increase with each landing. Protecting infrastructure from dust and debris is a crucial step in its long term functionality. A proposed way to mitigate these hazards is to build a lunar launch pad. Other areas of a lunar habitat will also need surface stabilization methods to help mitigate dust hazards. Roads would prevent dust from being lifted during movement and dust free zones might be required for certain areas critical to crew safety or to critical science missions. Work at NASA Kennedy Space Center (KSC) is investigating methods of stabilizing the lunar regolith including: sintering the regolith into a solid and using heat or UV cured polymers to stabilize the surface. Sintering, a method in which powders are heated until fusing into solids, has been proposed as one way of building a Lunar launch/landing pad. A solar concentrator has been built and used in the field to sinter JSC-1 Lunar stimulant. Polymer palliatives are used by the military to build helicopter landing pads and roads in dusty and sandy areas. Those polymers are dispersed in a solvent (water), making them unsuitable for lunar use. Commercially available, solvent free, polymer powders are being investigated to determine their viability to work in the same way as the solvent borne terrestrial analog. This presentation will describe the ongoing work at KSC in this field. Results from field testing will be presented. Physical testing results, including compression and abrasion, of field and laboratory prepared samples will be presented.

Hintze, Paul↗
DOE OSTI2020

An Optimized Fibril Network Morphology Enables High‐Efficiency and Ambient‐Stable Polymer Solar Cells

Abstract Morphological stability is crucially important for the long‐term stability of polymer solar cells (PSCs). Many high‐efficiency PSCs suffer from metastable morphology, resulting in severe device degradation. Here, a series of copolymers is developed by manipulating the content of chlorinated benzodithiophene‐4,8‐dione (T1‐Cl) via a random copolymerization approach. It is found that all the copolymers can self‐assemble into a fibril nanostructure in films. By altering the T1‐Cl content, the polymer crystallinity and fibril width can be effectively controlled. When blended with several nonfullerene acceptors, such as TTPTT‐4F, O‐INIC3, EH‐INIC3, and Y6, the optimized fibril interpenetrating morphology can not only favor charge transport, but also inhibit the unfavorable molecular diffusion and aggregation in active layers, leading to excellent morphological stability. The work demonstrates the importance of optimization of fibril network morphology in realizing high‐efficiency and ambient‐stable PSCs, and also provides new insights into the effect of chemical structure on the fibril network morphology and photovoltaic performance of PSCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Lyotropic Liquid Crystal Mediated Assembly of Donor Polymers Enhances Efficiency and Stability of Blade-Coated Organic Solar Cells

Conjugated polymers can undergo complex, concentration-dependent self-assembly during solution processing, yet little is known about its impact on film morphology and device performance of organic solar cells. Herein, lyotropic liquid crystal (LLC) mediated assembly across multiple conjugated polymers is reported, which generally gives rise to improved device performance of blade-coated non-fullerene bulk heterojunction solar cells. Using D18 as a model system, the formation mechanism of LLC is unveiled employing solution X-ray scattering and microscopic imaging tools: D18 first aggregates into semicrystalline nanofibers, then assemble into achiral nematic LLC which goes through symmetry breaking to yield a chiral twist-bent LLC. The assembly pathway is driven by increasing solution concentration – a common driving force during evaporative assembly relevant to scalable manufacturing. This assembly pathway can be largely modulated by coating regimes to give 1) lyotropic liquid crystalline assembly in the evaporation regime and 2) random fiber aggregation pathway in the Landau–Levich regime. The chiral liquid crystalline assembly pathway resulted in films with crystallinity 2.63 times that of films from the random fiber aggregation pathway, significantly enhancing the T80 lifetime by 50-fold. The generality of LLC-mediated assembly and enhanced device performance is further validated using polythiophene and quinoxaline-based donor polymers.

14 SOLAR ENERGY↗
DOE OSTI2023

Solid–Adsorbed Polymer–Electrolyte Interphases for Stabilizing Metal Anodes in Aqueous Zn and Non–Aqueous Li Batteries

Polymers are known to adsorb spontaneously from liquid solutions in contact with high-energy substrates to form configurationally complex, but robust phases that often exhibit higher durability than might be expected from the individual physical bonds formed with the substrate. Rational control of the physical, chemical, and transport properties of such interphases has emerged as a fundamental opportunity for scientific and technological advances in energy storage technology but requires in-depth understanding of the conformation states and electrochemical effect of the adsorbed polymers. Here, we analyze the interfacial adsorption of oligomeric polyethylene glycol (PEG) chains of moderate sizes dissolved in protic and aprotic liquid electrolytes and find that there is an optimum polymer molecular weight of approximately 400 Da at which the highest columbic efficiency is achieved for both Zn and Li deposition. Furthermore, these findings point to a simple, versatile approach for extending the lifetime of batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2004

New High-Temperature Membranes Developed for Proton Exchange Membrane Fuel Cells

Fuel cells are receiving a considerable amount of attention for potential use in a variety of areas, including the automotive industry, commercial power generation, and personal electronics. Research at the NASA Glenn Research Center has focused on the development of fuel cells for use in aerospace power systems for aircraft, unmanned air vehicles, and space transportation systems. These applications require fuel cells with higher power densities and better durability than what is required for nonaerospace uses. In addition, membrane cost is a concern for any fuel cell application. The most widely used membrane materials for proton exchange membrane (PEM) fuel cells are based on sulfonated perfluorinated polyethers, typically Nafion 117, Flemion, or Aciplex. However, these polymers are costly and do not function well at temperatures above 80 C. At higher temperatures, conventional membrane materials dry out and lose their ability to conduct protons, essential for the operation of the fuel cell. Increasing the operating temperature of PEM fuel cells from 80 to 120 C would significantly increase their power densities and enhance their durability by reducing the susceptibility of the electrode catalysts to carbon monoxide poisoning. Glenn's Polymers Branch has focused on developing new, low-cost membranes that can operate at these higher temperatures. A new series of organically modified siloxane (ORMOSIL) polymers were synthesized for use as membrane materials in a high-temperature PEM fuel cell. These polymers have an organic portion that can allow protons to transport through the polymer film and a cross-linked silica network that gives the polymers dimensional stability. These flexible xerogel polymer films are thermally stable, with decomposition onset as high as 380 C. Two types of proton-conducting ORMOSIL films have been produced: (1) NASA-A, which can coordinate many highly acid inorganic salts that facilitate proton conduction and (2) NASA-B, which has been produced and which incorporates strongly acidic (proton donating) functional groups into the polymer backbone. Both of these polymer films have demonstrated significantly higher proton conductivity than Nafion at elevated temperatures and low relative humidities. An added advantage is that these polymers are very inexpensive to produce because their starting materials are commodity chemicals that are commercially available in large volumes.

Kinder, James D.↗
DOE OSTI2023

Solid‐Adsorbed Polymer‐Electrolyte Interphases for Stabilizing Metal Anodes in Aqueous Zn and Non‐Aqueous Li Batteries

Abstract Polymers are known to adsorb spontaneously from liquid solutions in contact with high‐energy substrates to form configurationally complex, but robust phases that often exhibit higher durability than might be expected from the individual physical bonds formed with the substrate. Rational control of the physical, chemical, and transport properties of such interphases has emerged as a fundamental opportunity for scientific and technological advances in energy storage technology but requires in‐depth understanding of the conformation states and electrochemical effect of the adsorbed polymers. Here, we analyze the interfacial adsorption of oligomeric polyethylene glycol (PEG) chains of moderate sizes dissolved in protic and aprotic liquid electrolytes and find that there is an optimum polymer molecular weight of approximately 400 Da at which the highest columbic efficiency is achieved for both Zn and Li deposition. These findings point to a simple, versatile approach for extending the lifetime of batteries.

Jin, Shuo↗
DOE OSTI2023

Thermal Properties of Polymer Hole-Transport Layers Influence the Efficiency Roll-off and Stability of Perovskite Light-Emitting Diodes

While the performance of metal halide perovskite light-emitting diodes (PeLEDs) has rapidly improved in recent years, their stability remains a bottleneck to commercial realization. Here, we show that the thermal stability of polymer hole-transport layers (HTLs) used in PeLEDs represents an important factor influencing the external quantum efficiency (EQE) roll-off and device lifetime. We demonstrate a reduced EQE roll-off, a higher breakdown current density of approximately 6 A cm -2 , a maximum radiance of 760 W sr -1 m -2 , and a longer device lifetime for PeLEDs using polymer HTLs with high glass-transition temperatures. Furthermore, for devices driven by nanosecond electrical pulses, a record high radiance of 1.23 MW sr -1 m -2 and an EQE of approximately 1.92% at 14.6 kA cm -2 are achieved. Thermally stable polymer HTLs enable stable operation of PeLEDs that can sustain more than 11.7 million electrical pulses at 1 kA cm -2 before device failure.

14 SOLAR ENERGY↗
NASA NTRS1982

Durability of spacecraft materials

Research efforts are reviewed on the space durability of materials, including radiation effects on polymer matrix composites and films, dimensional stability of polymer matrix composites and tension-stabilized cables, and thermal control coatings. Research to date has concentrated on establishing a fundamental understanding of space environmental effects on current graphite-reinforced composites and polymer systems, and development of analytical models to explain observed changes in mechanical, physical, and optical properties. As a result of these research efforts, new experimental facilities have been developed to simulate the space environment and measure the observed property changes. Chemical and microstructural analyses have also been performed to establish damage mechanisms and the limits for accelerated testing. The implications of these results on material selection and system performance are discussed and additional research needs and opportunities in the area of tougher resin/matrix and metal/matrix composites are identified.

Darrel R. Tenney↗
DOE OSTI2022

Carbazole-Based Hole Transport Polymer for Methylammonium-Free Tin-Lead Perovskite Solar Cells with Enhanced Efficiency and Stability

As the most commonly used hole transport material (HTM) in tin-lead (Sn-Pb) perovskite solar cells (PSCs), poly(3,4-ethylenedioxythiophene) polystyrenesulfonate (PEDOT:PSS) limits the power conversion efficiency (PCE) and stability of the PSCs due to its acidic characteristics. Herein, an easily synthesized polymer HTM poly[(phenyl)imino[9-(2-ethylhexyl)carbazole]-2,7-diyl] (CzAn) with a shallow highest occupied molecular orbital (HOMO) level of -4.95 eV is used in a p-i-n structure, methylammonium-free, Sn-Pb PSC to replace PEDOT:PSS. Upon optimization using doping and surface engineering, high quality Sn-Pb PSCs could be successfully fabricated, boosting the PCE to 22.6% (stabilized PCE of 21.3%) compared with 21.2% for PEDOT:PSS. The perovskite films prepared on the modified CzAn HTM possess improved crystallinity, reduced trap-state density, and larger carrier mobility resulting in PSCs with greatly improved stability.

carrier mobility↗
DOE OSTI2025

Synthesis and Properties of Poly(vinyl chloride)- b -polyethylene Multiblock Copolymers through the Hydrodechlorination of PVC with Silylium Ions

Polymer compatibilizers stabilize the interface between two immiscible polymers to allow for a material that improves properties for additional use. Chlorinated polyethylene (CPE) is a common compatibilizer, yet there does not exist a synthetic pathway either from monomers or via the functionalization of polyethylene (PE) to yield a polymer that has a controlled chlorine amount and primary structure along the polymer chain. Herein, we report a series of novel block copolymers of poly(vinyl chloride) (PVC) and PE, synthesized through selective hydrodechlorination of PVC. Contrary to CPE, the full range of chlorination can be obtained and the block number can be altered. Interfacial adhesion studies reveal samples with competitive compatibilization of PVC/polyolefin elastomer blends (POE). In conclusion, this method shows that post-polymerization modification can be a strategic top-down synthesis to achieve high performance polymers.

Wood, Zachary A. [Univ. of Southern California, Lo↗
DOE OSTI2021

Origin of Proteolytic Stability of Peptide-Brush Polymers as Globular Proteomimetics

Peptide-brush polymers (PBPs), wherein every side-chain of the polymers is peptidic, represent a new class of proteomimetic with unusually high proteolytic resistance while maintaining bioactivity. Here, we sought to determine the origin of this behavior and to assess its generality via a combined theory and experimental approach. A series of PBPs with various polymer backbone structures were prepared and examined for their proteolytic stability and bioactivity. We discovered that an increase in the hydrophobicity of the polymer backbones is predictive of an elevation in proteolytic stability of the side-chain peptides. Computer simulations, together with small-angle X-ray scattering (SAXS) analysis, revealed globular morphologies for these polymers, in which pendant peptides condense around hydrophobic synthetic polymer backbones driven by the hydrophobic effect. As the hydrophobicity of the polymer backbones increases, the extent of solvent exposure of peptide cleavage sites decreases, reducing their accessibility to proteolytic enzymes. This study provides insight into the important factors driving PBP aqueous-phase structures to behave as globular, synthetic polymer-based proteomimetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Tuning Thermal Stability through Dopant Size in Chemically Doped DPP–Thiophene Polymers

Molecular doping of conjugated polymers (CPs) is a key strategy for improving the performance of organic electronics devices, particularly thermoelectrics. Doped donor–acceptor (D–A) conjugated polymers, characterized by a tunable energy gap between the Fermi level and the transport band, show great promise in achieving high electrical conductivity (σ) while preserving a favorable Seebeck coefficient (S). Despite the promising performance enhancement of chemically doped D–A polymers, their thermal stability remains largely underexplored, a crucial consideration for the long-term operation of organic thermoelectric devices. In this study, we investigated the dopant size-dependent thermal stability of a diketopyrrolopyrrole-thiophene (DPP-T) D–A copolymer, utilizing two p-dopants: 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F 4 TCNQ) and Mo(tfd-CO 2 Me) 3 . Temperature-dependent UV–vis–NIR spectroscopy revealed that DPP-T/F 4 TCNQ is more prone to dedoping under a high temperature thermal stress than DPP-T/Mo(tfd-CO 2 Me) 3 . Although the F 4 TCNQ doped polymer shows higher initial in-plane conductivity than its Mo(tfd-CO 2 Me) 3 counterpart, it undergoes a conductivity loss of more than an order of magnitude after annealing at 120 °C for 30 min. In contrast, the in-plane conductivity of DPP-T/Mo(tfd-CO 2 Me) 3 remains stable under the same thermal conditions. Thermogravimetric analysis ruled out dopant sublimation as a primary contributor to dedoping, leading us to attribute the conductivity loss in F 4 TCNQ-doped DPP-T to dopant phase separation and migration. This observation was further confirmed by X-ray scattering studies and nanoscale infrared microscopy and spectroscopy studies. This work could provide further insights into the thermal stability of doped conjugated polymers and suggests that incorporating bulkier dopants is an effective strategy to enhance the thermal robustness of doped DPP-type systems.

Conjugated polymers↗
NASA NTRS1990

Thermo-oxidative stability studies of PMR-15 polymer matrix composites reinforced with various fibers

An experimental study was conducted to measure the thermo-oxidative stability of PMR-15 polymer matrix composites reinforced with various fibers and to observe differences in the way they degrade in air. The fibers that were studied included graphite and the thermally stable Nicalon and Nextel ceramic fibers. Weight loss rates for the different composites were assessed as a function of mechanical properties, specimen geometry, fiber sizing, and interfacial bond strength. Differences were observed in rates of weight loss, matrix cracking, geometry dependency, and fiber-sizing effects. It was shown that Celion 6000 fiber-reinforced composites do not exhibit a straight-line Arrhenius relationship at temperatures above 316 C.

Bowles, Kenneth J.↗
DOE OSTI2021

MXene binder stabilizes pseudocapacitance of conducting polymers

Unlike conventional additives, the use of MXene as a binder improves the electrochemical performance of conducting polymers. The approach is extendable to a large family of poorly conducting organic materials for sustainable energy storage devices.

Boota, Muhammad↗
DOE OSTI2023

Polymer-Based Thermally Stable Chemiresistive Sensor for Real-Time Monitoring of NO 2 Gas Emission

Here, we present a thermally stable, mechanically compliant, and sensitive polymer-based NO 2 gas sensor design. Interconnected nanoscale morphology driven from spinodal decomposition between conjugated polymers tethered with polar side chains and thermally stable matrix polymers offers judicious design of NO 2 -sensitive and thermally tolerant thin films. The resulting chemiresitive sensors exhibit stable NO 2 sensing even at 170 °C over 6 h. Controlling the density of polar side chains along conjugated polymer backbone enables optimal design for coupling high NO 2 sensitivity, selectivity, and thermal stability of polymer sensors. Lastly, thermally stable films are used to implement chemiresistive sensors onto flexible and heat-resistant substrates and demonstrate a reliable gas sensing response even after 500 bending cycles at 170 °C. Such unprecedented sensor performance as well as environmental stability are promising for real-time monitoring of gas emission from vehicles and industrial chemical processes.

47 OTHER INSTRUMENTATION↗
NASA NTRS1988

Processable, high temperature polymers from 1,4,5,8-tetrahydro-1,4;5,8-diepoxyanthracene and bis-dienes

1,4,5,8-tetrahydro-1,4;5,8-diepoxyanthracene reacts with various anthracene end-capped polyimide oligomers to form Diels-Alder cycloaddition copolymers. The polymers are soluble in common organic solvents, and have molecular weights of approximately 21,000 to 32,000. These resins exhibit lower weight loss in air than in nitrogen. This is suggested to be due to dehydration (loss of water ranges from 2 to 5 percent) at temperatures of 390 to 400 C to give thermooxidatively stable pentiptycene units along the polymer backbone. Because of their high softening points and good thermooxidative stability, the polymers have potential as processable, matrix resins for high temperature composite applications.

Meador, Mary Ann B.↗