Search NASA⌕ Search

SEARCH · Search NASA

Results for “power conversion efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

ADEPT: Efficient Power Conversion

ADEPT Project: In today’s increasingly electrified world, power conversion—the process of converting electricity between different currents, voltage levels, and frequencies—forms a vital link between the electronic devices we use every day and the sources of power required to run them. The 14 projects that make up ARPA-E’s ADEPT Project, short for “Agile Delivery of Electrical Power Technology,” are paving the way for more energy efficient power conversion and advancing the basic building blocks of power conversion: circuits, transistors, inductors, transformers, and capacitors.

ADEPT↗

Doping and energy band modulation of nanoporous electrodes for enhancing power conversion efficiency of dye-sensitized solar cells

Highlights: • Cd and La are co-doped into TiO{sub 2} by sol-gel method. • La dopant modulates particle size to enhance dye adsorption. • Cd dopant causes decrease in band gap of TiO{sub 2} and creates trap sites. • Only small amount of Cd dopant required for the favorable decrease in band gap. • 24% of efficiency increment for 0.1 mol% Cd-La TiO{sub 2} compared to pure TiO{sub 2}. - Abstract: This work report, for the first time, the co-doping of mesoporous TiO{sub 2} with Cd{sup 2+} and La{sup 3+} cations for improved performance of dye-sensitized solar cells (DSSCs). Cd{sup 2+} ions modify the TiO{sub 2} lattice interstitially and lower the band gap enabling better electron injection. La{sup 3+} ions, having a larger ionic radius compared to that of Ti{sup 4+} ions, occupy interstitial sites and modulate particle size which increase surface area, hence the dye adsorption. The result demonstrates that DSSC employed with 0.1 mol% Cd-La co-doped TiO{sub 2} anode an increase in power conversion efficiency of 24% compared to DSSC with pure TiO{sub 2} anode. The doping concentration has to remain low as not to completely transform the morphology of TiO{sub 2} and to decrease the number of oxygen vacancies forming trap sites for recombination. The selection of ionic radius of dopants is significant as they can modify the TiO{sub 2} lattice either by substitution or interstitial of titanium ions.

36 MATERIALS SCIENCE↗

A Nonfullerene Semitransparent Tandem Organic Solar Cell with 10.5% Power Conversion Efficiency

Abstract Semitransparent organic solar cells have great potential for building integrated photovoltaics and power‐generating windows owing to their advantages of light weight, mechanical flexibility, and color tunability. However, the performance of previous semitransparent organic solar cells have been limited by their relatively weak optical absorptions. In this paper, an efficient nonfullerene semitransparent tandem organic solar cell that exhibits a broad absorption from 300 to 1000 nm is reported. The rear subcell is based on a narrow‐bandgap nonfullerene acceptor named IEICS‐4F that exhibits a strong crystallinity and high electron mobility. As a result, the IEICS‐4F‐based single‐junction opaque and semitransparent organic solar cells yield high efficiencies of 10.3% and 7.5%, respectively. To further enhance light harvesting of the single‐junction semitransparent organic solar cells while maintaining a decent transmittance, a semitransparent tandem organic solar cell is fabricated by incorporating a medium‐bandgap P3TEA:FTTB‐PDI 4 blend as the front subcell. A high efficiency of 10.5% is recorded with an average transmittance of 20%.

Chen, Shangshang↗

Tandem concentrator solar cells with 30 percent (AMO) power conversion efficiency

Very high efficiency concentrator solar panels are envisioned as economical and reliable electrical power subsystems for space based platforms of the future. GaAs concentrator cells with very high efficiencies and good sub-bandgap transmissions can be fabricated on standard wafers. GaSb booster cell development is progressing very well; performance characteristics are still improving dramatically. Consistent GaAs/GaSb stacked cell AMO efficiencies greater than 30 percent are expected.

Avery, J. E.↗

More Efficient Power Conversion for EVs: Gallium-Nitride Advanced Power Semiconductor and Packaging

Broad Funding Opportunity Announcement Project: Delphi is developing power converters that are smaller and more energy efficient, reliable, and cost-effective than current power converters. Power converters rely on power transistors which act like a very precisely controlled on-off switch, controlling the electrical energy flowing through an electrical circuit. Most power transistors today use silicon (Si) semiconductors. However, Delphi is using semiconductors made with a thin layer of gallium-nitride (GaN) applied on top of the more conventional Si material. The GaN layer increases the energy efficiency of the power transistor and also enables the transistor to operate at much higher temperatures, voltages, and power-density levels compared to its Si counterpart. Delphi is packaging these high-performance GaN semiconductors with advanced electrical connections and a cooling system that extracts waste heat from both sides of the device to further increase the device’s efficiency and allow more electrical current to flow through it. When combined with other electronic components on a circuit board, Delphi’s GaN power transistor package will help improve the overall performance and cost-effectiveness of HEVs and EVs.

ARPA-E↗

A wide-bandgap polymer based on the alkylphenyl-substituted benzo[1,2- b :4,5- b ′]dithiophene unit with high power conversion efficiency of over 11%

A novel wide bandgap polymer PTZP with E optg of 2.01 eV was designed and synthesized. PSCs based on PTZP exhibited high PCE of 11.8%. PCEs of over 10% were obtained with an active layer thickness of 200 nm or an area of 0.81 cm 2 . PTZP was shown to be a promising conjugated polymer for the fabrication of efficient large area PSCs.

Guo, Xia↗

Concept Design for a High Temperature Helium Brayton Cycle with Interstage Heating and Cooling

The primary metric for the viability of these next generation nuclear power plants will be the cost of generated electricity. One important component in achieving these objectives is the development of power conversion technologies that maximize the electrical power output of these advanced reactors for a given thermal power. More efficient power conversion systems can directly reduce the cost of nuclear generated electricity and therefore advanced power conversion cycle research is an important area of investigation for the Generation IV Program. Brayton cycles using inert or other gas working fluids, have the potential to take advantage of the higher outlet temperature range of Generation IV systems and allow substantial increases in nuclear power conversion efficiency, and potentially reductions in power conversion system capital costs compared to the steam Rankine cycle used in current light water reactors. For the Very High Temperature Reactor (VHTR), Helium Brayton cycles which can operate in the 900 to 950 C range have been the focus of power conversion research. Previous Generation IV studies examined several options for He Brayton cycles that could increase efficiency with acceptable capital cost implications. At these high outlet temperatures, Interstage Heating and Cooling (IHC) was shown to provide significant efficiency improvement (a few to 12%) but required increased system complexity and therefore had potential for increased costs. These scoping studies identified the potential for increased efficiency, but a more detailed analysis of the turbomachinery and heat exchanger sizes and costs was needed to determine whether this approach could be cost effective. The purpose of this study is to examine the turbomachinery and heat exchanger implications of interstage heating and cooling configurations. In general, this analysis illustrates that these engineering considerations introduce new constraints to the design of IHC systems that may require different power conversion configurations to take advantage of the possible efficiency improvement. Very high efficiency gains can be achieved with the IHC approach, but this can require large low pressure turbomachinery or heat exchanger components, whose cost may mitigate the efficiency gain. One stage of interstage cooling is almost always cost effective, but careful optimization of system characteristics is needed for more complex configurations. This report summarizes the primary factors that must be considered in evaluating this approach to more efficient cycles, and the results of the engineering analysis performed to explore these options for Generation IV high temperature reactors.

30 DIRECT ENERGY CONVERSION↗