Search NASA⌕ Search

SEARCH · Search NASA

Results for “process influence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

The Influence of Process Conditions on the Chemical Composition of Pine Wood Catalytic Pyrolysis Oils

Pine wood samples were used as model feedstock to study the properties of catalytic fast pyrolysis oils. The influence of two commercial zeolite catalysts (BASF and SudChem) and pretreatment of the pine wood with sodium hydroxide on pyrolysis products were investigated. The pyrolysis oils were first fractionated using column chromatography and characterized using GC-MS. Long chain aliphatic hydrocarbons, levoglucosan, aldehydes and ketones, guaiacols/syringols, and benzenediols were the major compounds identified in the pyrolysis oils. The catalytic pyrolysis increased the polycyclic hydrocarbons fraction. Significant decreases in phthalate derivatives using SudChem and long chain aliphatics using BASF catalyst were observed. Significant amounts of aromatic heterocyclic hydrocarbons and benzene derivatives were formed, respectively, using BASF and SudChem catalysts. Guaiacyl/syringyl and benzenediols derivatives were partly suppressed by the zeolite catalysts, while the sodium hydroxide treatment enriched phenolic derivatives. Zeolite catalyst and sodium hydroxide were employed together; they showed different results for each catalyst.

Pereira, J.↗

Stress influenced trapping processes in Si based multi-quantum well structures and heavy ions implanted Si

Multi-quantum well structures and Si wafers implanted with heavy iodine and bismuth ions are studied in order to evaluate the influence of stress on the parameters of trapping centers. The experimental method of thermostimullatedcurrents without applied bias is used, and the trapping centers are filled by illumination. By modeling the discharge curves, we found in multilayered structures the parameters of both 'normal' traps and 'stress-induced' ones, the last having a Gaussian-shaped temperature dependence of the cross section. The stress field due to the presence of stopped heavy ions implanted into Si was modeled by a permanent electric field. The increase of the strain from the neighborhood of I ions to the neighborhood of Bi ions produces the broadening of some energy levels and also a temperature dependence of the cross sections for all levels.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Influence of process parameters on properties of reactively sputtered tungsten nitride thin films

Tungsten nitride (WN{sub x}) thin films were produced by reactive dc magnetron sputtering of tungsten in an Ar-N{sub 2} gas mixture. The influence of the deposition power on the properties of tungsten nitride has been analyzed and compared with that induced by nitrogen content variation in the sputtering gas. A combined analysis of structural, electrical and optical properties on thin WN{sub x} films obtained at different deposition conditions has been performed. It was found that at an N{sub 2} content of 14% a single phase structure of W{sub 2}N films was formed with the highest crystalline content. This sputtering gas composition was subsequently used for fabricating films at different deposition powers. Optical analysis showed that increasing the deposition power created tungsten nitride films with a more metallic character, which is confirmed with resistivity measurements. At low sputtering powers the resulting films were crystalline whereas, with an increase of power, an amorphous phase was also present. The incorporation of an excess of nitrogen atoms resulted in an expansion of the W{sub 2}N lattice and this effect was more pronounced at low deposition powers. Infrared analysis revealed that in WN{sub x} films deposited at low power, chemisorbed N{sub 2} molecules did not behave as ligands whereas at high deposition power they clearly appeared as ligands around metallic tungsten. In this study, the influence of the most meaningful deposition parameters on the phase transformation reaction path was established and deposition conditions suitable for producing thermally stable and highly crystalline W{sub 2}N films were found.

36 MATERIALS SCIENCE↗

Influence of Process Parameters on the Morphology of Spray‐Dried BaCl 2 Powders

Spray‐drying is an effective method for producing powder aggregates with controlled size and morphology. Here, we report on a systematic study aimed at determining how spray‐drying parameters such as nozzle temperature, gas flow, salt concentration and solution feed rate, influence the characteristics of BaCl 2 granules prepared from aqueous solutions. We correlate the granule characteristics to these conditions through the use of processing maps and modeling. It is found that well‐dispersed, high density and spherical aggregates, which are favorable for subsequent powder compaction and sintering, can be obtained within a limited range of processing conditions.

Shoulders, W. Taylor↗

Comprehensive, Quantitative Risk Assessment of CO 2 Geologic Sequestration (Final Technical Report)

A Quantitative Failure Modes and Effects Analysis (QFMEA) was developed to conduct comprehensive, quantitative risk assessments on CO 2 capture, transportation, and sequestration or use in deep saline aquifers, enhanced oil recovery operations, or enhanced coal bed methane operations. The model identifies and characterizes potential risks; identifies the likely failure modes, causes, effects and methods of detection; lists possible risk prevention and risk mitigation steps; estimates potential damage recovery costs, mitigation costs and costs savings resulting from mitigation; and ranks (prioritizes) risks according to the probability of failure, the severity of failure, the difficulty of early failure detection and the potential for fatalities. The QFMEA model generates the necessary information needed for effective project risk management. Diverse project information can be integrated into a concise, common format that allows comprehensive, quantitative analysis, by a cross-functional team of experts, to determine: What can possibly go wrong? How much will damage recovery cost? How can it be prevented or mitigated? What is the cost savings or benefit of prevention or mitigation? Which risks should be given highest priority for resolution? The QFMEA model can be tailored to specific projects and is applicable to new projects as well as mature projects. The model can be revised and updated as new information comes available. It accepts input from multiple sources, such as literature searches, site characterization, field data, computer simulations, analogues, process influence diagrams, probability density functions, financial analysis models, cost factors, and heuristic best practices manuals, and converts the information into a standardized format in an Excel spreadsheet. Process influence diagrams, geologic models, financial models, cost factors and an insurance schedule were developed to support the QFMEA model. Comprehensive, quantitative risk assessments were conducted on three (3) sites using the QFMEA model: (1) SACROC Northern Platform CO 2 -EOR Site in the Permian Basin, Scurry County, TX, (2) Pump Canyon CO 2 -ECBM Site in the San Juan Basin, San Juan County, NM, and (3) Farnsworth Unit CO 2 -EOR Site in the Anadarko Basin, Ochiltree County, TX. The sites were sufficiently different from each other to test the robustness of the QFMEA model.

54 ENVIRONMENTAL SCIENCES↗

Influence of Processing Techniques on the Surface Microstructure of V{sub 85}Ni{sub 15} Membrane Alloy

Vanadium-based alloys with a BCC structure are considered to be an alternative to palladium alloys for hydrogen purification. Since the performance of membranes is influenced by not only their bulk characteristics but also their surface condition, we have investigated the effect of different surface preparation techniques (abrasive grinding and polishing, electrolytic polishing, and ion etching) on the surface microstructure of V{sub 85}Ni{sub 15} membrane alloy using X-ray photoelectron spectroscopy. After electrolytic polishing and ion etching, we observed an increase in the percentages of vanadium and nickel metals in the surface layer of the alloy in comparison with its state after abrasive polishing. Such changes are expected to be favorable for an increase in the rate of hydrogen dissociation and recombination on the surface of the membrane material, eventually improving hydrogen transport efficiency.

36 MATERIALS SCIENCE↗

Bioprocessing Separations Consortium Three-Year Overview: Technical Advances, Process Economics Influence, and State of the Science

The Bioprocessing Separations Consortium solves separations challenges that are unique to bioprocessing. To do this, the Consortium uses two methods: applying existing technologies to new challenges and developing new technologies that may address these unique challenges better than today’s commercial technologies. In its research and development, the Consortium leverages its three core capabilities: materials development and evaluation, process development, and analysis and computation. In its first three years, from 2016 to 2019, the Consortium addressed four critical challenges in biochemical and thermochemical processing. First, the Consortium targeted the fractionation of lignin to enable valorization of this portion of biomass that offers diverse, complex, and valuable building blocks and products. Second, Consortium researchers developed technologies to enable process intensification, which can reduce equipment needs, energy consumption, and waste generation, thereby cutting bioprocessing capital costs and rendering processes more efficient. Third, the Consortium sought to recover carbon from dilute aqueous streams that are common to bioprocessing; recovering dilute carbon can improve process efficiency and economics. Finally, Consortium researchers designed and developed new materials and catalysts to reduce targeted foulants and poisons in bioprocessing streams that can limit the lifetime of downstream catalysts or fermenting microorganisms. Table 1 lists the technologies that were examined and places them in the context of the Consortium’s capabilities, types of bioprocesses, and critical challenges in bioprocessing separations. Overall, across these projects, we have developed separations technologies for 10 bioprocesses, addressed 9 target compounds in bioprocessing, developed 10 materials, and evaluated 4 processes for cost and sustainability.

09 BIOMASS FUELS↗

Bioprocessing Separations Consortium Three-Year Overview: Technical Advances Process Economics Influence, and State of the Science

The Bioprocessing Separations Consortium solves separations challenges that are unique to bioprocessing. To do this, the Consortium uses two methods: applying existing technologies to new challenges and developing new technologies that may address these unique challenges better than today’s commercial technologies. In its research and development, the Consortium leverages its three core capabilities: materials development and evaluation, process development, and analysis and computation. In its first three years, from 2016 to 2019, the Consortium addressed four critical challenges in biochemical and thermochemical processing. First, the Consortium targeted the fractionation of lignin to enable valorization of this portion of biomass that offers diverse, complex, and valuable building blocks and products. Second, Consortium researchers developed technologies to enable process intensification, which can reduce equipment needs, energy consumption, and waste generation, thereby cutting bioprocessing capital costs and rendering processes more efficient. Third, the Consortium sought to recover carbon from dilute aqueous streams that are common to bioprocessing; recovering dilute carbon can improve process efficiency and economics. Finally, Consortium researchers designed and developed new materials and catalysts to reduce targeted foulants and poisons in bioprocessing streams that can limit the lifetime of downstream catalysts or fermenting microorganisms. Table 1 lists the technologies that were examined and places them in the context of the Consortium’s capabilities, types of bioprocesses, and critical challenges in bioprocessing separations. Overall, across these projects, we have developed separations technologies for 10 bioprocesses, addressed 9 target compounds in bioprocessing, developed 10 materials, and evaluated 4 processes for cost and sustainability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bioprocessing Separations Consortium: Three-Year Overview - Technical Advances, Process Economics Influence, and State of the Science

The Bioprocessing Separations Consortium solves separations challenges that are unique to bioprocessing. To do this, the Consortium uses two methods: applying existing technologies to new challenges and developing new technologies that may address these unique challenges better than today’s commercial technologies. In its research and development, the Consortium leverages its three core capabilities: materials development and evaluation, process development, and analysis and computation. In its first three years, from 2016 to 2019, the Consortium addressed four critical challenges in biochemical and thermochemical processing. First, the Consortium targeted the fractionation of lignin to enable valorization of this portion of biomass that offers diverse, complex, and valuable building blocks and products. Second, Consortium researchers developed technologies to enable process intensification, which can reduce equipment needs, energy consumption, and waste generation, thereby cutting bioprocessing capital costs and rendering processes more efficient. Third, the Consortium sought to recover carbon from dilute aqueous streams that are common to bioprocessing; recovering dilute carbon can improve process efficiency and economics. Finally, Consortium researchers designed and developed new materials and catalysts to reduce targeted foulants and poisons in bioprocessing streams that can limit the lifetime of downstream catalysts or fermenting microorganisms. Table 1 lists the technologies that were examined and places them in the context of the Consortium’s capabilities, types of bioprocesses, and critical challenges in bioprocessing separations. Overall, across these projects, we have developed separations technologies for 10 bioprocesses, addressed 9 target compounds in bioprocessing, developed 10 materials, and evaluated 4 processes for cost and sustainability.

09 BIOMASS FUELS↗

Assessing the influence of processing parameters and external loading on the nanoporous structure and morphology of nanoporous gold toward catalytic applications

Nanoporous gold structure gains several unique physical and chemical properties from its nanoscale foam structure composed of ligaments and connected pores. The high specific surface area and interconnected pores make its structure ideal for gas catalysis. Catalytic activity arises in part from the high number density of surface steps and kinks at points of high curvature in the nanoporous structure. However, the structure also makes the material macroscopically brittle and unreliable for many applications due to poor mechanical stability. The ligament diameter, which regulates both desirable chemical properties and mechanical instability, can be tuned to over three orders of magnitude, but few morphology features can be adjusted independently of this. In this report we fabricate nanoporous gold with an average ligament diameter of around 10 nm while varying synthesis parameters and quantify the resulting morphology in order to evaluate the effect of processing on the resulting nanoscale foam structure. In situ tensile experiments are performed to observe how both individual ligaments and the foam structure's features change during deformation in real-time. We found two new morphology features that are independently controllable through synthesis parameters and are likely to influence mechanical stability while preserving or enhancing catalytic activity. The curvature of the ligaments can be increased by stirring the electrolyte during dealloying and the width of the ligament diameter size distribution can be adjusted by controlling the coarsening rate. In situ mechanical tests show that grain boundaries can influence crack propagation and that ligaments removed from the crack tip experience both elastic and plastic stress.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Seven good practices for the environmental licensing of coastal interventions: Lessons from the Italian, Cuban, Spanish and Colombian regulatory frameworks and insights on coastal processes

Highlights: • Environmental licensing procedures (ELP) line up by projects instead of environments. • The ELP of four countries was compared according to the generic EIA stages. • The study relies upon the revision of EIA legislation and technical guidelines. • Seven EIA good practices were extracted from the ELP analysis of the four countries. • A changing approach is proposed for the EPL performance on coastal interventions. - Abstract: Environmental licensing is the regulatory procedure that enforces the environmental impact assessment (EIA) of human activities inside a given country. Despite worldwide acceptance of EIA as a valid tool, its application in coastal environments is still too diverse and limited regarding the specificity of the natural processes influencing the shore. This paper compares the Environmental Licensing Procedure (ELP) of four countries, focusing on the activities that could affect the coastal geomorphology. The acquisition and validation of information were done through interviews with EIA representatives in each country, who signalized the official documents of environmental licensing and coastal management to be considered in the documentary review. The results present those differences and similarities among ELP stages in each country, based on the principles of the International Association of Impact Assessment and the national documents analyzed. In sum, 59 interventions associated with human uses and activities in the coastal zone were compared according to the prescriptive character of the environmental licensing in Italy, Spain, Cuba and Colombia. The natural processes influencing coastal geomorphology were also analyzed within the technical criteria included in the official guidelines for the EIA, finding a generalized weakness in processes associated with geochemical courses on coastal environments. By way of discussion, seven good practices are illustrated, according to their pertinence to the impact assessment of the coastal zone: 1) The integration of screening and scoping; 2) Evaluation focusing on the environment rather than the intervention; 3) Binding the coastal zone delimitation; 4) Institutional articulation; 5) Accreditation of environmental consultancies; 6) Official guidelines by types of environment; 7) The integration of environmental geographic information. Finally, general conclusions to assist EIA practitioners operating in the four countries and recommendations to lead further research are provided, introducing a novel process-oriented approach for ELP.

54 ENVIRONMENTAL SCIENCES↗

Turbulent Processes that Influence Boundary-Layer Cloud Structure (Final Technical Report)

Many models of the atmosphere simulate vertical profiles of observable fields, such as temperature, moisture, and vertical velocity. To assess the realism of such model output, it is important to evaluate the modeled profiles against observations. However, many extant evaluations consist of comparing time averaged profiles from the model and the observations. Such time averages can smooth out unrealistic features that appear in instantaneous profiles. In this way, the time averages may obscure certain model errors from detection. For instance, many models misrepresent turbulent processes, leading to profiles that are too smoothed out or too noisy. E.g., if a model has coarse vertical resolution and overly strong diffusion, then the model may be unable to produce observed sharp peaks. On the other hand, a model may have artificial approximations that produce spurious jumps in the vertical. Much can be learned by browsing through instantaneous snapshots of model output. But the volume of output produced by a global model is far too great to rely purely on visual inspection. In addition, we need a way to statistically characterize the profiles, so that anomalies can be detected more conveniently.

54 ENVIRONMENTAL SCIENCES↗

Initialized Earth system prediction from subseasonal to decadal timescales

Initialized Earth system predictions are made by starting a numerical prediction model in a state as consistent as possible to observations, and running it forward in time for up to ten years. Skillful predictions at time slices from subseasonal to seasonal (S2S), seasonal to interannual (S2I) and seasonal to decadal (S2D) offer information useful for various stakeholders, from agriculture to water resource management, and human and infrastructure safety. In this Review, we examine the processes influencing predictability, and discuss estimates of skill across S2S, S2I and S2D timescales. There are encouraging signs that skillful predictions can be made: at S2S timescales, there has been some skill in predicting the Madden-Julian Oscillation and North Atlantic Oscillation; at S2I in predicting the El Niño-Southern Oscillation; and at S2D, in predicting variability in North Atlantic sea surface temperatures. However, challenges remain, and future work must prioritise reducing model error, more effectively communicating forecasts to users, and increasing process and mechanistic understanding that could increase predictive skill and, in turn, confidence. As numerical models progress towards Earth system models, initialized predictions are expanding to include prediction of sea-ice, air pollution, terrestrial and ocean biochemistry which can bring clear benefit to society and various stakeholders.

climate prediction↗

Control of Ionomer Distribution and Porosity in Roll-to-Roll Coated Fuel Cell Catalyst Layers

As fuel cells transition from the laboratory to industrial production for vehicles and other applications there is a need to understand how manufacturing processes impact the properties and, ultimately, the performance of materials. Roll-to-roll coating enables processing at meters per second speeds with physics that can be quite different from common laboratory coating methods. In this work, we have focused on the coating of catalyst layers for proton exchange membrane fuel cells. Commonly, laboratory samples are prepared using spray coating or hand painting, which effectively coat many thin layers to achieve the desired catalyst layer thickness. This creates catalyst layers with uniform distributions of materials throughout the thickness of the full catalyst layer. In contrast, roll-to-roll methods, like slot die and gravure, coat the catalyst layer as a single wet film. As the film dries, ink constituents are able to segregate, leading to a heterogeneous distribution of materials through the thickness of the layer. It is also known that solvent and drying rate can affect the morphology of the catalyst layer. Thus, there is a need to understand how ink formulation and the drying process influence the distribution of materials and catalyst layer morphology. Here, we have explored the influence of solvent and drying rate on morphology of roll-to-roll coated catalyst layers. We show the development of the Kelvin probe method as a rapid screening technique for qualitative analysis of ionomer distribution. We also utilize nano X-ray computed tomography to visualize electrode structure and to quantify particle-size and pore-size distributions, thickness-dependent ionomer distribution, tortuosity, and effective transport properties. We find that solvent has a strong influence on ionomer distribution, with less of an effect on porosity. Conversely, drying temperature has a strong influence on porosity, but less influence on ionomer distribution. Finally, we utilize in situ fuel cell performance testing and other advanced diagnostics to quantify the impact of catalyst layer properties on fuel cell performance and demonstrate that roll-to-roll coating is capable of coating high performance catalyst layers in multi-meter lengths. have focused on the coating of catalyst layers for proton exchange membrane fuel cells. Commonly, laboratory samples are prepared using spray coating or hand painting, which effectively coat many thin layers to achieve the desired catalyst layer thickness. This creates catalyst layers with uniform distributions of materials throughout the thickness of the full catalyst layer. In contrast, roll-to-roll methods, like slot die and gravure, coat the catalyst layer as a single wet film. As the film dries, ink constituents are able to segregate, leading to a heterogeneous distribution of materials through the thickness of the layer. It is also known that solvent and drying rate can affect the morphology of the catalyst layer. Thus, there is a need to understand how ink formulation and the drying process influence the distribution of materials and catalyst layer morphology. Here, we have explored the influence of solvent and drying rate on morphology of roll-to-roll coated catalyst layers. We show the development of the Kelvin probe method as a rapid screening technique for qualitative analysis of ionomer distribution. We also utilize nano X-ray computed tomography to visualize electrode structure and to quantify particle-size and pore-size distributions, thickness-dependent ionomer distribution, tortuosity, and effective transport properties. We find that solvent has a strong influence on ionomer distribution, with less of an effect on porosity. Conversely, drying temperature has a strong influence on porosity, but less influence on ionomer distribution. Finally, we utilize in situ fuel cell performance testing and other advanced diagnostics to quantify the impact of catalyst layer properties on fuel cell performance and demonstrate that roll-to-roll coating is capable of coating high performance catalyst layers in multi-meter lengths.

30 DIRECT ENERGY CONVERSION↗

Observing the Growth of Metal-Organic Frameworks by In-Situ Liquid Cell Transmission Electron Microscopy

Liquid Cell Transmission Electron Microscopy (LCTEM) can provide direct observations of solution phase nanoscale materials, and holds great promise as a tool for monitoring dynamic self assembly processes. Control over particle behavior within the liquid cell, and under electron beam irradiation, is of paramount importance for this technique to contribute to our understanding of chemistry and materials science at the nanoscale. However, this type of control has not been demonstrated for complex, organic macromolecular materials, which form the basis for all biological systems, all of polymer science, and encompass important classes of advanced porous materials. Here we show that by controlling the liquid cell surface chemistry and electron beam effects, the dynamics and self-assembly of metal-organic frameworks (MOFs) can be observed. Our results demonstrate that hybrid organic/inorganic beam sensitive materials can be analyzed with LCTEM and at least in the case of Zif-8 dynamics, the results correlate with observations from bulk growth or other standard synthetic conditions. We anticipate that direct, nanoscale imaging by LCTEM of MOF nucleation and growth mechanisms, may provide insight into controlled MOF crystal morphology, domain composition, and processes influencing defect formation.

Environmental Molecular Sciences Laboratory↗

A Numerical Study of Factors Affecting Fracture-Fluid Cleanup and Produced Gas/Water in Marcellus Shale: Part II

Horizontal wells combined with successful multi-stage hydraulic fracture treatments are currently the most established method for effectively stimulating and enabling economic development of gas bearing organic-rich shale formations. Fracture cleanup in the Stimulated Reservoir Volume (SRV) is critical to stimulation effectiveness and long-term well performance. However, fluid cleanup is often hampered by formation damage, and post-fracture well performance frequently falls below expectations. A systematic study of the factors that hinder fracture fluid cleanup in shale formations can help optimize fracture treatments and better quantify long term volumes of produced water and gas. Fracture fluid cleanup is a complex process influenced by multi-phase flow through porous media (relative permeability hysteresis, capillary pressure etc.), reservoir rock and fluid properties, fracture fluid properties, proppant placement, fracture treatment parameters, and subsequent flowback and field operations. Changing SRV and fracture conductivity as production progresses further adds to the complexity of this problem. Numerical simulation is the best, and most practical approach to investigate such a complicated blend of mechanisms, parameters, their interactions, and subsequent impact on fracture fluid cleanup and well deliverability. In this paper, a 3-dimensional, 2-phase, dual-porosity model was used to investigate the impact of multiphase flow, proppant crushing, proppant diagenesis, shut-in time, reservoir rock compaction, gas slippage, and gas desorption on fracture fluid cleanup, and well performance in Marcellus shale. The research findings have shed light on the factors that substantially constrains efficient fracture fluid cleanup in gas shales, and provided guidelines for improved fracture treatment designs and water management.

58 GEOSCIENCES↗

Influences of Processing and Fatigue Cycling on Residual Stresses in a NiCrY-Coated Powder Metallurgy Disk Superalloy

Oxidation and corrosion can attack superalloy disk surfaces exposed to increasing operating temperatures in some turbine engine environments. Any potential protective coatings must also be resistant to harmful fatigue cracking during service. The objective of this study was to investigate how residual stresses evolve in one such coating. Fatigue specimens of a powder metallurgy-processed disk superalloy were coated with a NiCrY coating, shot peened, and then subjected to fatigue in air at room and high temperatures. The effects of this processing and fatigue cycling on axial residual stresses and other aspects of the coating were assessed. While shot peening did induce beneficial compressive residual stresses in the coating and substrate, these stresses relaxed in the coating with subsequent heating. Several cast alloys having compositions near the coating were subjected to thermal expansion and tensile stress relaxation tests to help explain this response of residual stresses in the coating. For the coated fatigue specimens, this response contributed to earlier cracking of the coating than for the uncoated surface during long intervals of cycling at 760 °C. Yet, substantial compressive residual stresses still remained in the substrate adjacent to the coating, which were sufficient to suppress fatigue cracking there. The coating continued to protect the substrate from hot corrosion pitting, even after fatigue cracks initiated in the coating.

36 MATERIALS SCIENCE↗