Search NASA⌕ Search

SEARCH · Search NASA

Results for “pseudorange”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Deriving a unique reference frame for GPS measurements

Two strategies for deriving a unique reference frame for GPS (Global Positioning System) measurements are discussed. The first strategy utilizes the precise relative positions which have been predetermined by VLBI (very long baseline interferometry) to fix the frame orientation and the absolute scaling, while the offset from the geocenter is determined from GPS measurements. Three different cases are presented under this strategy. The second strategy establishes a reference frame by holding only the longitudinal of one of the tracking sites fixed. The absolute scaling is determined by the adopted gravitational constant (GM) of the earth; and the latitude is inferred from the time signature of the earth's rotation in the GPS measurements. The coordinate system thus defined will be a geocentric earth fixed coordinate system. A covariance analysis shows that geometric positioning to an accuracy of a few centimeters can be achieved with just one day of precise GPS pseudorange and carrier phase data.

Malla, Rajendra P.↗

Carrier phase ambiguity resolution for the Global Positioning System applied to geodetic baselines up to 2000 km

A technique for resolving the ambiguities in the GPS carrier phase data (which are biased by an integer number of cycles) is described which can be applied to geodetic baselines up to 2000 km in length and can be used with dual-frequency P code receivers. The results of such application demonstrated that a factor of 3 improvement in baseline accuracy could be obtained, giving centimeter-level agreement with coordinates inferred by very-long-baseline interferometry in the western United States. It was found that a method using pseudorange data is more reliable than one using ionospheric constraints for baselines longer than 200 km. It is recommended that future GPS networks have a wide spectrum of baseline lengths (ranging from baselines shorter than 100 km to those longer than 1000 km) and that GPS receivers be used which can acquire dual-frequency P code data.

Blewitt, Geoffrey↗

Refinement of Earth's gravity field with Topex GPS measurements

The NASA Ocean Topography Experiment satellite TOPEX will carry a microwave altimeter accurate to a few centimeters for the measurement of ocean height. The capability can be fully exploited only if TOPEX altitude can be independently determined to 15 cm or better. This in turn requires an accurate gravity model. The gravity will be tuned with selected nine 10-day arcs of laser ranging, which will be the baseline tracking data type, collected in the first six months of TOPEX flight. TOPEX will also carry onboard an experimental Global Positioning System (GPS) flight receiver capable of simultaneously observing six GPS satellites above its horizon to demonstrate the capability of GPS carrier phase and P-code pseudorange for precise determination of the TOPEX orbit. It was found that subdecimeter orbit accuracy can be achieved with a mere two-hour arc of GPS tracking data, provided that simultaneous measurements are also made at six of more ground tracking sites. The precision GPS data from TOPEX are also valuable for refining the gravity model. An efficient technique is presented for gravity tuning using GPS measurements. Unlike conventional global gravity tuning, this technique solves for far fewer gravity parameters in each filter run. These gravity parameters yield local gravity anomalies which can later be combined with the solutions over other parts of the earth to generate a global gravity map. No supercomputing power will be needed for such combining. The approaches used in this study are described and preliminary results of a covariance analysis presented.

Wu, Sien-Chong↗

GPS inferred geocentric reference frame for satellite positioning and navigation

Accurate geocentric three-dimensional positioning is of great importance for various geodetic and oceanographic applications. While relative positioning accuracy of a few centimeters has become a reality using Very Long Baseline Interferometry (VLBI), the uncertainty in the offset of the adopted coordinate system origin from the geocenter is still believed to be of the order of one meter. Satellite Laser Ranging (SLR) is capable of determining this offset to better than 10 cm, though, because of the limited number of satellites, this requires a long arc of data. The Global Positioning System (GPS) measurements provide a powerful alternative for an accurate determination of this origin offset in relatively short period of time. Two strategies are discussed, the first utilizes the precise relative positions predetermined by VLBI, whereas the second establishes a reference frame by holding only one of the tracking sites longitude fixed. Covariance analysis studies indicate that geocentric positioning to an accuracy of a few centimeters can be achieved with just one day of precise GPS pseudorange and carrier phase data.

Malla, Rajendra P.↗

An automatic editing algorithm for GPS data

An algorithm has been developed to edit automatically Global Positioning System data such that outlier deletion, cycle slip identification, and correction are independent of clock instability, selective availability, receiver-satellite kinematics, and tropospheric conditions. This algorithm, called TurboEdit, operates on undifferenced, dual frequency carrier phase data, and requires the use of P code pseudorange data and a smoothly varying ionospheric electron content. TurboEdit was tested on the large data set from the CASA Uno experiment, which contained over 2500 cycle slips.Analyst intervention was required on 1 percent of the station-satellite passes, almost all of these problems being due to difficulties in extrapolating variations in the ionospheric delay. The algorithm is presently being adapted for real time data editing in the Rogue receiver for continuous monitoring applications.

Blewitt, Geoffrey↗

Improved effectiveness of GPS RAIM through ridge regression signal processing

A measurement processing method has been developed which markedly improves the GPS Receiver Autonomous Integrity Monitoring (RAIM) software-based algorithm system's effectiveness in detecting satellite signal failures. Detection is via the consistency of a redundant set of pseudorange measurements. When five satellites are in view, five different subsolutions can be calculated; the integrity alarm is triggered on the basis of subsolution comparisons. Because a poor distribution of the satellites also causes RAIM subsolution scattering, a methodology for selecting the covariance matrix is presented which incorporates ridge regression into a Kalman filter.

Kelly, Robert J.↗

Toward decimeter Topex orbit determination using GPS

Several practical aspects of precision GPS-based Topex orbit determination are investigated. Multipath signals contaminating Topex pseudorange data are greatly reduced by placing the GPS antenna on a conducting backplate consisting of concentric choke rings to attenuate signals coming in from the Topex horizon and below, and by elevating it on a boom to keep it well above all reflecting surfaces. A proper GPS antenna cutoff view angle is chosen so that a sufficient number of GPS satellites with good geometry are in view while reception of reflected signals is minimized. The geometrical strength of the tracking data is optimized by properly selecting GPS satellites to be observed so as to provide data with moderate continuity, low PDOP, and common visibility with ground tracking sites. The tracking performance is greatly enhanced when three complementary sites are added to the minimum ground tracking network consisting of the three NASA DSN sites.

Wu, Sien-Chong↗

Analysis of navigation performance for the Earth Observing System (EOS) using the TDRSS Onboard Navigation System (TONS)

Use of the Tracking and Data Relay Satellite System (TDRSS) Onboard Navigation System (TONS) was proposed as an alternative to the Global Positioning System (GPS) for supporting the Earth Observing System (EOS) mission. The results are presented of EOS navigation performance evaluation with respect to TONS based orbit, time, and frequency determination (OD/TD/FD). Two TONS modes are considered: one uses scheduled TDRSS forward link service to derive one way Doppler tracking data for OD/FD support (TONS-I); the other uses an unscheduled navigation beacon service (proposed for Advanced TDRSS) to obtain pseudorange and Doppler data for OD/TD/FD support (TONS-II). Key objectives of the analysis were to evaluate nominal performance and potential sensitivities, such as suboptimal tracking geometry, tracking contact scheduling, and modeling parameter selection. OD/TD/FD performance predictions are presented based on covariance and simulation analyses. EOS navigation scenarios and the contributions of principal error sources impacting performance are also described. The results indicate that a TONS mode can be configured to meet current and proposed EOS position accuracy requirements of 100 and 50 m, respectively.

Elrod, B.↗

Onboard configuration and operation of the TDRSS onboard navigation system (TONS)

This paper presents an overview of onboard navigation via TDRSS for both the EP/EUVE (Explorer Platform/Extreme Ultraviolet Explorer) experiment and for future users of TONS. System goals and objectives are discussed, and the operations concept for the three stages of TONS development is presented. A description is given of the first stage of the TONS development, the experiment implementation on EP, including the hardware characteristics, signal acquisition process, onboard data acquisition, and ground data processing in the flight emulation environment of the TONS Ground Support System (TGSS). Evaluation of the experiment implementation is presented and improvements described in terms of the second development stage, a full TONS I system, which uses Doppler data derived from scheduled forward-link S-band services to provide onboard orbit and frequency determination. A method for onboard time maintenance commensurate with TONS I is also presented. TONS II, the third stage, will use Doppler and pseudorange data derived from a continuous, nonscheduled forward-link S-band beacon service to provide onboard orbit, time, and frequency determination.

Gramling, Cheryl J.↗

Equivalent GPS measurements for efficient estimation process

Dual-frequency pseudorange and carrier phase data streams can be analytically combined into a single equivalent data stream, reducing the data volume and computing time in the filtering process for parameter estimation by a factor of 2 to 4. The resulting single data stream is that of carrier phase measurements with both data noise and bias uncertainty strictly defined. Based on these analytical formulas the equivalent GPS measurements can be formed by simple and efficient numerical calculations without any degradation in data strength. Formulation for the equivalent GPS measurements and their covariances are given in closed form; and a numerical simulation is performed to demonstrate the validity and effectiveness of the equivalent measurements.

Wu, S. C.↗

Error analysis of post-processed orbit determination for the Geosat Follow-On altimetric satellite using GPS tracking

A series of covariance analyses is presented for the Navy's Geosat Follow-On (GFO) altimetric satellite using selective availability/anti-spoof (SA/A-S) qualified (dual frequency) and non-SA/A-S qualified (single frequency) GPS receiver configurations. Data obtained indicate that a SA/A-S qualified GPS receiver is capable of meeting the 10 cm GFO post-processed radial orbit accuracy requirement when using reduced dynamic tracking. The non-SA/A-S qualified receiver is also capable of approaching this 10 cm radial uncertainty level if all systematic errors are removed from the C/A pseudorange and reduced dynamic tracking is used again.

Schreiner, William S.↗

An optimal GPS data processing technique

A formula is derived to optimally combine dual-frequency GPS (Global Positioning System) pseudorange and carrier phase data streams into a single equivalent data stream, reducing the data volume and computing time in the filtering process for parameter estimation by a factor of four. The resulting single data stream is that of carrier phase measurements with both data noise and bias uncertainty strictly defined. With this analytical formula the single stream of equivalent GPS measurements can be efficiently formed by simple numerical calculations without any degradation in data strength. The formulation for the optimally combined GPS data and their covariances are given in closed form. Carrier phase ambiguity resolution, when feasible, is improved due to the preservation of the full data strength with the optimal data combining process.

Wu, S. C.↗

An optimal GPS data processing technique for precise positioning

A mathematical formula to optimally combine dual-frequency GPS pseudorange and carrier phase (integrated Doppler) data streams into a single data stream is derived in closed form. The data combination reduces the data volume and computing time in the filtering process for parameter estimation by a factor of 4 while preserving the full data strength for precise positioning. The resulting single data stream is that of carrier phase measurements with both data noise and bias uncertainty strictly defined. With this mathematical formula the single stream of optimally combined GPS measurements can be efficiently formed by simple numerical calculations. Carrier phase ambiguity resolution, when feasible, is strengthened due to the preserved full data strength with the optimally combined data and the resulting longer wavelength for the ambiguity to be resolved.

Wu, Sien-Chong↗

TOPEX/POSEIDON operational orbit determination results using global positioning satellites

Results of operational orbit determination, performed as part of the TOPEX/POSEIDON (T/P) Global Positioning System (GPS) demonstration experiment, are presented in this article. Elements of this experiment include the GPS satellite constellation, the GPS demonstration receiver on board T/P, six ground GPS receivers, the GPS Data Handling Facility, and the GPS Data Processing Facility (GDPF). Carrier phase and P-code pseudorange measurements from up to 24 GPS satellites to the seven GPS receivers are processed simultaneously with the GDPF software MIRAGE to produce orbit solutions of T/P and the GPS satellites. Daily solutions yield subdecimeter radial accuracies compared to other GPS, LASER, and DORIS precision orbit solutions.

Guinn, J.↗

Evaluation of GPS position and attitude determination for automated rendezvous and docking missions

The use of the Global Positioning System for position and attitude determination is evaluated for an automated rendezvous and docking mission. The typical mission scenario involves the chaser docking with the target for resupply or repair purposes, and is divided into three sections. During the homing phase, the chaser utilizes coarse acquisition pseudorange data to approach the target; guidance laws for this stage are investigated. In the second phase, differential carrier phase positioning is utilized. The chaser must maintain a quasiconstant distance from the target, in order to resolve the initial integer ambiguities. Once the ambiguities are determined, the terminal phase is entered, and the rendezvous is completed with continuous carrier phase tracking. Attitude knowledge is maintained in all phases through the use of the carrier phase observable. A Kalman filter is utilized to estimate all states from the noisy measurement data. The effects of selective availability and cycle slips are also investigated.

Diprinzio, Marc D.↗

Differential GPS and system integration of the Low Visibility Landing and Surface Operations (LVLASO) demonstration

The LVLASO Flight Demonstration of ASTA concepts (FDAC) integrates NASA-Langley's electronic moving map display and Transport Systems Research Vehicle (TSRV) (a modified Boeing 737 aircraft); ARINC's VHF data link, GPS ground station, and automated controller workstation; and Norden's surface radar/airport movement safety system. Aircraft location is shown on the electronic map display in the cockpit. An approved taxi route as well as other aircraft and surface traffic are also displayed. An Ashtech Z12 Global Positioning System (GPS) receiver on the TSRV estimates the aircraft's position. In Differential mode (DSPS), the Ashtech receiver accepts differential C/A code pseudorange corrections from a GPS ground station. The GPS ground station provides corrections up to ten satellites. The corrections are transmitted on a VHF data link at a 1 Hz. rate using the RTCM-104 format. DGPS position estimates will be within 5 meters of actual aircraft position. DGPS position estimates are blended with position, velocity, acceleration, and heading data from the TSRV Air Data/Inertial Reference System (ADIRS). The ADIRS data is accurate in the short-term, but drifts over time. The DGPS data is used to keep the ADIRS position accurate. Ownship position, velocity, heading, and turn rate are sent at a 20 Hz. rate to the electronic map display. Airport traffic is detected by the airport surface radar system. Aircraft and vehicles such as fuel trucks and baggage carts are detected. The traffic's location, velocity, and heading are sent to the TSRV. To prevent traffic symbology from jumping each second when a location update arrives, velocity and heading are used to predict a new traffic location for each display update. Possible runway incursions and collisions can be shown on the electronic map. Integrating the different systems used in the FDAC requires attention to the underlying coordinate systems. The airport diagram displayed on the electronic map is obtained from published navigational charts. The charts reference the North American Datum of 1927 (NAD27) or a local state-plane coordinate system. GPS uses the World Geodetic Standard of 1984 (WGS84). Both NAD27 and WGS84 model the Earth as an ellipsoid, however, they use a different origin and different size ellipsoids. Latitudes and longitudes given in these systems can be converted to a Cartesian system with the origin at the Earth's center. The surface radar detects traffic in a locally-level, rho-theta coordiante system. The electronic airport diagram is stored using a flat XY coordinate system. The map origin is at the tower and is referenced as True North up. All ownship and other traffic positions must be converted to the electronic map's frame of reference for display.

Rankin, James M.↗

Early results from the TOPEX/POSEIDON GPS precise orbit determination demonstration

TOPEX/POSEIDON, a US/French oceanographic mission launched in August 1992, is the first earth satellite to carry a multi-channel, dual frequency Global Positioning System (GPS) receiver capable of making high precision P-code pseudorange and carrier phase measurements. The receiver was placed on TOPEX/POSEIDON as an experiment to demonstrate the potential of differential GPS tracking for subdecimeter orbit determination. In addition to the receiver, TOPEX/POSEIDON carries two flight-proven tracking systems to provide the operational precise orbit determination needed to meet the mission scientific requirements. These include a French-built one-way Doppler system known as DORIS (Doppler Orbitography and Radiopositioning Integrated by Satellite) and a circular ring of laser retroreflectors. Here we evaluate the quality of the GPS-determined orbits by examining post-fit residuals, orbit comparisons with DORIS, and orbit repeatability on overlapping data arcs. Overlapping data arcs with 6 hrs of common data out of a 30-hr arc have an average root-mean-square (RMS) altitude difference of 3.0 cm for 9 arcs. The average RMS altitude difference about the mean with a DORIS orbit was 5.7 cm.

Bertiger, Willy↗

DGPS ground station integrity monitoring

This paper summarizes the development of a unique Differential Global Positioning System (DGPS) ground station integrity monitor which can offer improved availability over conventional code-differential monitoring systems. This monitoring technique, called code/carrier integrity monitoring (CCIM), uses the highly stable integrated Doppler measurement to smooth the relatively noisy code-phase measurements. The pseudorange correction is therefore comprised of the integrated Doppler measurement plus the CCIM offset. The design and operational results of a DGPS ground station integrity monitor are reported. A robust integrity monitor is realized which is optimized for applications such as the Special Category I (SCAT-I) defined in the RTCA Minimum Aviation System Performance Standards.

Skidmore, Trent A.↗