Direct measurement of the quantum counting efficiency of RCA C31000E/F photomultipliers at 6328 A
Quantum counting efficiency of commercial photomultiplier at 0328 A by direct measurements, including signal and background dependence
Lakes, R. S.↗
SEARCH · Search NASA
Results for “quantum efficiency”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Efficiency droop contributors in InGaN green light emitting diodes
Here, efficiency droop contributors (i.e., inherent Auger–Meitner recombination, polarization-induced effects, thermal effects, and light extraction) in InGaN green light emitting diodes (LEDs) are decoupled and quantified. First, a modified ABC model is developed, and external quantum efficiency measurements are taken under constant and pulsed currents ( EQE Constant and EQE Pulsed , respectively). The LED internal quantum efficiency with and without thermal effects ( IQE$^{ABC}_{Constant}$ and IQE$^{ABC}_{Pulsed}$, respectively) is extracted using the modified model. Then, using Raman spectroscopy, the LED junction temperature is extracted. Finally, using the optical-electrical model (OEM), the polarization- and temperature-independent LED internal quantum efficiency ( IQE OEM ) is calculated from the modified ABC model and the extracted junction temperature. By comparing external ( EQE Constant ) and the three internal quantum efficiencies ( IQE$^{ABC}_{Constant}$, IQE$^{ABC}_{Pulsed}$, and IQE OEM ), the impacts of inherent Auger–Meitner recombination, polarization-induced effects, thermal effects, and light extraction on the efficiency droop are decoupled and quantified. It is found that inherent Auger–Meitner recombination-induced droop is approximately 49% of the total efficiency droop in commercial green LEDs, while polarization-induced effects contribute about 35%, and thermal droop accounts for nearly 16%. Lastly, these findings suggest, to quash the green gap, it is critical to search for materials and device designs with low inherent Auger–Meitner coefficients and polarization fields, respectively.
42 ENGINEERING↗
Recent Developments in DFTB+, a Software Package for Efficient Atomistic Quantum Mechanical Simulations
DFTB+ is a flexible, open-source software package developed by its community, designed for fast and efficient atomistic quantum mechanical simulations. It employs various methods that approximate density functional theory (DFT), such as density functional-based tight binding (DFTB) and the extended tight binding (xTB) approach allowing simulations of large systems over extended time scales with reasonable accuracy, while being significantly faster than traditional ab initio methods. In recent years, several new extensions of the DFTB method have been developed and implemented in the DFTB+ program package in order to improve the accuracy and generality of the available simulation results. In this paper, we review those enhancements, show several use case examples and discuss the strengths and limitations of its features.
36 MATERIALS SCIENCE↗
Tree tensor network hierarchical equations of motion based on time-dependent variational principle for efficient open quantum dynamics in structured thermal environments
In this work, we introduce an efficient method, TTN-HEOM, for exactly calculating the open quantum dynamics for driven quantum systems interacting with highly structured bosonic baths by combining the tree tensor network (TTN) decomposition scheme with the bexcitonic generalization of the numerically exact hierarchical equations of motion (HEOM). The method yields a series of quantum master equations for all core tensors in the TTN that efficiently and accurately capture the open quantum dynamics for non-Markovian environments to all orders in the system–bath interaction. These master equations are constructed based on the time-dependent Dirac–Frenkel variational principle, which isolates the optimal dynamics for the core tensors given the TTN ansatz. The dynamics converges to the HEOM when increasing the rank of the core tensors, a limit in which the TTN ansatz becomes exact. We introduce TENSO, tensor equations for non-Markovian structured open systems, as a general-purpose Python code to propagate the TTN-HEOM dynamics. We implement three general propagators for the coupled master equations: two fixed-rank methods that require a constant memory footprint during the dynamics and one adaptive-rank method with a variable memory footprint controlled by the target level of computational error. We exemplify the utility of these methods by simulating a two-level system coupled to a structured bath containing one Drude–Lorentz component and eight Brownian oscillators, which is beyond what can presently be computed using the standard HEOM. Our results show that the TTN-HEOM is capable of simulating both dephasing and relaxation dynamics of driven quantum systems interacting with structured baths, even those of chemical complexity, with an affordable computational cost.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Efficient single-photon emission via quantum-confined charge funneling to quantum dots
Quantum light sources, particularly single-photon emitters (SPEs), are critical for quantum communications and computing. Among them, III-V semiconductor quantum dots (QDs) have demonstrated superior SPE metrics, including near-unity brightness, high photon purity, and indistinguishability, making them especially suitable for quantum applications. However, their overall quantum efficiency—determined by a product of the internal, excitation, and outcoupling efficiencies—remains limited, primarily due to low (typically below 0.1%) excitation efficiency. To mitigate the low efficiency under non-resonant pumping, here we realize liquid droplet etched GaAs QDs in a microscale 3D AlGaAs charge-carrier funnel. The funnel channels charge carriers to the QD and enhances the overall emission efficiency by over one order of magnitude while preserving the SPE behavior. We reveal that a modified energy landscape around the QD leads to the excitation efficiency improvement. These energy landscape-modified QDs can be operated with optical excitation up to 10 μm away, raising the promise of efficient electrically driven QD SPEs for quantum information systems.
Park, Sanghyeok [Sandia National Laboratories (SNL↗
Dynamic in vivo monitoring of granum structural changes of Ctenanthe setosa (Roscoe) Eichler during drought stress and subsequent recovery
Investigating the effects of drought stress and subsequent recovery on the structure and function of chloroplasts is essential to understanding how plants adapt to environmental stressors. We investigated Ctenanthe setosa (Roscoe) Eichler, an ornamental plant that can tolerate prolonged drought periods (40 and 49 days of water withdrawal). Conventional biochemical, biophysical, physiological and (ultra)structural methods combined for the first time in a higher plant with in vivo small-angle neutron scattering (SANS) were used to characterize the alterations induced by drought stress and subsequent recovery. Upon drought stress, no significant changes occurred in the chloroplast ultrastructure, chlorophyll content, 77K fluorescence emission spectra and maximal quantum efficiency of PSII (Qy dark), but the actual quantum efficiency of PSII (Qy light) decreased, the amounts of PSI-LHCII complexes and PSII monomers declined, and that of PSII supercomplexes increased. Thickness of the leaf and of the adaxial hypodermis, chloroplast length and granum repeat distance (RD) values decreased upon drought stress, as shown by light microscopy and SANS, respectively. Because of the very slight (nm-range) changes in RD values, the large biological variability (significant differences in RD values among the leaves and studied leaf regions) and the invasive sampling required for this method, transmission electron microscopy (TEM) hardly showed significant differences. On the other side, in situ SANS analyses provided a unique insight in vivo into the fast structural recovery of the granum structure of drought-stressed leaves, which happened already 18 h after re-watering, while functional and biochemical recovery took place on a longer time scale.
59 BASIC BIOLOGICAL SCIENCES↗
Efficient bidirectional quantum frequency conversion between telecom and visible bands using adaptively phase-matched III-V nanophotonic waveguides
Quantum frequency conversion (QFC) is essential for interfacing quantum systems operating at different wavelengths and for realizing scalable quantum networks. Despite extensive progress, achieving QFC with simultaneous high efficiency, low pump power, minimal noise, broad bandwidth, and pump-wavelength flexibility remains challenging. Here, we demonstrate efficient, low-noise, and bidirectional QFC between the telecom (1550-nm) and visible (780-nm) bands using unpoled indium gallium phosphide (InGaP) χ (2) nanophotonic waveguides, eliminating the need for a long-wavelength pump. Leveraging the large nonlinear susceptibility of InGaP together with adaptive phase-matching control, we obtain 27% (55%) internal efficiency in a 6-mm (2.5-mm)-long waveguide with a low pump power of 20 mW (50 mW) and a noise flux spectral density of 10 −4 counts per second per hertz at signal–pump detuning of 20 nm. These results mark a significant advance in integrated nonlinear photonics for high-performance QFC, facilitating the development of versatile and scalable quantum networks.
Hu, Jierui [Univ. of Illinois at Urbana-Champaign,↗
Photoemission from cesium-oxide-activated InGaAsP.
Zinc-doped InGaAsP quaternary III-V material of the proper composition range shows superior photoemission properties to either InGaAs or InAsP ternary material. The minority-carrier diffusion length in the quaternary material is at least as long as that in InAsP and much longer than observed in InGaAs. The barrier height at the InGaAsP-Cs2O interface is lowered by cooling, giving increased electron escape probability and new highs in quantum efficiency over a wide wavelength range. For example, a 1.06-micron quantum efficiency of 7.5%/incident photon was observed at -90 C.
James, L. W.↗
Ultraviolet response of InGaAsP photocathodes
Three type VPM 164 photomultiplier tubes with III-IV compound InGaAsP reflective photocathodes were developed for use in ground-based and space-borne astronomical detectors. Although the achieved response of about 0.02% quantum efficiency at 1.083 microns fell short of the goal of 1% quantum efficiency, the broadband characteristics are still considerably better than those of the S-1 photocathode.
Feibelman, W. A.↗
Infrared heterodyne spectroscopy for astronomical purposes
Heterodyne infrared astronomy was carried out using CO2 lasers and some solid state tunable lasers. The best available detectors are mercury cadmium telluride photodiodes. Their quantum efficiencies reach values near 0.5 and in an overall system an effective quantum efficiency, taking into account optical losses and amplifier noise, of about 0.25 was demonstrated. Initial uses of 10 micron heterodyne spectroscopy were for the study of planetary molecular spectra.
Townes, C. H.↗
photoemission
The code is a python package that implements a one-step model to estimate quantum efficiency of photoemission from solid state surfaces. The analytical formulation is based on the approach proposed in Phys Rev B 95, 075439 (2017). This code extends that formalism from a model Hamiltonian to the calculation of quantum efficiency from the electronic states derived from solid-state quantum mechanical calculations obtained using the VASP code.
Batista, Enrique↗
Grain engineering for efficient near-infrared perovskite light-emitting diodes
Metal halide perovskites show promise for next-generation light-emitting diodes, particularly in the near-infrared range, where they outperform organic and quantum-dot counterparts. However, they still fall short of costly III-V semiconductor devices, which achieve external quantum efficiencies above 30% with high brightness. Among several factors, controlling grain growth and nanoscale morphology is crucial for further enhancing device performance. This study presents a grain engineering methodology that combines solvent engineering and heterostructure construction to improve light outcoupling efficiency and defect passivation. Solvent engineering enables precise control over grain size and distribution, increasing light outcoupling to ~40%. Constructing 2D/3D heterostructures with a conjugated cation reduces defect densities and accelerates radiative recombination. The resulting near-infrared perovskite light-emitting diodes achieve a peak external quantum efficiency of 31.4% and demonstrate a maximum brightness of 929 W sr -1 m -2 . These findings indicate that perovskite light-emitting diodes have potential as cost-effective, high-performance near-infrared light sources for practical applications.
42 ENGINEERING↗
Development of a (Hg, Cd)Te photodiode detector, Phase 2
High speed sensitive (Hg,Cd)Te photodiode detectors operating in the 77 to 90 K temperature range have been developed for the 10.6 micron spectral region. P-N junctions formed by impurity (gold) diffusion in p-type (Hg, Cd) Te have been investigated. It is shown that the bandwidth and quantum efficiency of a diode are a constant for a fixed ratio of mobility/lifetime ratio of minority carriers. The minority carrier mobility and lifetime uniquely determine the bandwidth and quantum efficiency and indicate the shallow n on p (Hg,Cd) Te diodes are preferable as high performance, high frequency devices.
Source record↗
Plasmon-enhanced ultralow-threshold solid-state triplet fusion upconversion
Triplet fusion upconversion has potential applications in solar cells, photoredox catalysis, additive manufacturing and bioimaging. However, solid-state upconversion systems have struggled to measure up to their solution-phase counterparts, often requiring enormous optical power densities to operate at the maximum efficiency. Here we substantially improve the performance of upconversion films through excitation with surface plasmons that propagate along a planar silver-film interface, leading to an absorption enhancement that reduces the intensity threshold I th by a factor of 19 and enhances the external quantum efficiency by a factor of 17. From this, we achieve I th values as low as 3.4 mW cm −2 and an external quantum efficiency up to 0.094%. To demonstrate real-world viability, we couple the upconversion film to plasmons generated by the near-field of excitons in an organic light-emitting diode. As a result, this scheme is then used to fabricate a white-emitting organic light-emitting diode where blue emission sources from plasmon-excited upconversion, achieving a high colour rendering index of 86.2 and setting precedent for blue emission in the absence of high-energy polarons or triplets.
36 MATERIALS SCIENCE↗
Measurement of the QE Map
113 MHz SRF gun utilized CsK 2 Sb and Na 2 KSb cathodes, which were irradiated with a pulsed green laser with a wavelength of 0.53 microns. The drive laser generated 78 kHz pulses with an acousto-optic modulator selecting the desired number of pulses reaching the cathode. The operator can select the aperture size, defining the laser spot diameter on the cathode, and the power level, which is controlled by a rotating polarizer. The laser power reaching the cathode can be measured with a meter based on a photodiode. The quantum efficiency (QE) of a photocathode serves as a primary indicator of its state. Small QE renders the cathode unusable when the desired bunch charge cannot be achieved. Strong variations in the quantum efficiency on the cathode surface might lead to the growth of the beam emittance due to the space charge effects. We have created a routine to measure the distribution of the QE on the cathode. The operator selects the aperture size, the central spot location, and the scan ranges for both planes. The scan starts from the central spots and proceeds along a spiral-like trajectory, making N rounds. The number of rounds can be chosen, and the total number of measured points is (2N+1) 2 . The laser spot movement is shown in Fig. 1.
43 PARTICLE ACCELERATORS↗
Evaluation of the absolute single-photon detection efficiency of HRPPD
Pixelated High Rate Picosecond Photon Detectors (HRPPDs) by Incom Inc. are promising photosensors for use in Ring Imaging CHerenkov (RICH) detectors, where a high gain, sub-mm position resolution and sub-100ps timing resolution are required in a single photon mode. Quantum Efficiency (QE) has been measured for the first batch of EIC HRPPDs both by Incom and EIC research groups at Jefferson Lab and Brookhaven Lab, with peak values at ∼365 nm typically exceeding 30%. Furthermore, in this study, we present a first direct measurement of Photon Detection Efficiency being equal to (17.1 ± 0.1 [stat] ± 0.3 [sys])% at 398.6 nm, for a pixel near the center of HRPPD, in a photoelectron pulse counting mode using a picosecond diode laser. HRPPD QE at the same spot and at the same wavelength was evaluated to be (24.4 ± 0.1 [stat] ± 0.3 [sys])%, leading to a Collection Efficiency estimate of (70.3 ± 1.6)%, which is consistent with the expectations.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Origin of reduced efficiency in GaN-based micro-LEDs studied by scanning near-field optical microscopy
The quantum efficiency of micro-light emitting diodes (micro-LEDs) is lower than that of large area LEDs. This efficiency reduction is typically attributed to the nonradiative Shockley–Read–Hall recombination at the surface defects and current leakage through the sidewall region without a clear distinction between these effects. In this work, we attempt to find out which of these phenomena is most critical for the reduced efficiency of micro-LEDs. This has been done by mapping electroluminescence (EL) and photoluminescence (PL) and measuring PL dynamics in blue GaN micro-LEDs fabricated by dry etching. It has been found that in the as-etched device, the EL intensity is much lower than in devices with KOH etching and atomic layer deposition of SiO 2 . This effect is especially pronounced close to the sidewalls. On the other hand, PL decay times are similar in as-etched and passivated devices, both in their center and at the sidewalls. This allows concluding that the main mechanism of the reduced efficiency of micro-LEDs fabricated by dry etching is the current leakage in the sidewall region and not the nonradiative recombination. The KOH etching has been found to be the most efficient means to eliminate the current leakage.
36 MATERIALS SCIENCE↗
Photosynthetic responses to light levels in drought-tolerant novel peanut (Arachis hypogaea L) genotypes
Abstract Drought is a significant abiotic stressor that reduces peanut production because it alters photosynthetic activity and impacts crop growth. Therefore, developing drought-tolerant peanut genotypes capable of maintaining higher photosynthetic rates (A) under stress is crucial. This study assessed changes in photosynthetic and chlorophyll fluorescence responses to light (photosynthetic photon flux density, PPFD) in newly bred drought-tolerant peanut genotypes. Ten genotypes [NM-3, NM-5, NM-6, NM-23, NM-69, NM-70, NM-74, NM-77, V-C, and C-76–16] were evaluated under full irrigation (FC 100 ) and deficit irrigation (FC 50 ) in a split-plot design with four replications in a greenhouse. Under high PPFD levels, genotype NM-5 with deficit irrigation exhibited significantly higherA, stomatal conductance (gs), quantum efficiency of photosystem II (ΦPSII), and electron transport rate (ETR) by 40–59%, 135–525%, 31–212%, and 31–102%, respectively, than check varieties (V-C and C-76–16) and other genotypes. The NM-74 and NM-77 genotypes also performed well under deficit irrigations but with slightly lowerA,gs, ΦPSII, and ETR. Genotypes NM-5, NM-23, NM-74, and NM-77 exhibited significantly higher quantum efficiency of photosystem II (Fv’/Fm’) and photochemical quenching (qP) with higher light intensities in the daily cycle under deficit irrigation. The decline in ETR at the same PPFD levels in NM-3, NM 69, NM-70, and C-76–16 indicated photoinhibition or saturation of the photosynthetic apparatus compared to other genotypes. Concurrently, FC 100 irrigation level minimizes photoinhibition, enhancingA,gs, ΦPSII, and ETR in the genotypes than FC 50 . Therefore, we conclude that NM-5, NM-74, and NM-77 genotypes can perform better under water deficit environments. As such, chlorophyll fluorescence parameters Fv’/Fm’ and qP can be considered for selective breeding to enhance photosynthetic efficiencies.
Science & Technology - Other Topics↗