SEARCH · Search NASA

Results for “radar activities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Development of a calibration workstation for SIR-C

The paper describes the status of a comprehensive synthetic aperture radar (SAR) software package developed specifically to aid the calibration of a multifrequency and multipolarization radar like the Shuttle Imaging Radar, SIR-C. The primary data types processed are engineering telemetry, point targets (corner reflectors and polarimetric active radar calibrators), distributed targets (clutter), tone-generators, and ground receivers. The parameters derived to aid the calibration of the production processor include measurements of relative radiometric channel to channel imbalance, absolute calibration constants, antenna pattern corrections, noise levels, polarimetric cross-talk, and geometric offsets. The software reports standard performance measurements such as resolution, peak and integrated sidelobes, radiometric response accuracy, and geometrical distortions such as scale errors, position bias and standard deviation, and image skew. Furthermore, the inclusion of software to allow updates of the shuttle-state vector (position and velocity) is considered.

Madsen, S. N.↗

NASA NTRS1995

Demonstration of solar echoes using the Air Force OTH-B radar

From the late 50s to early 70s, attempts were made by at least two different groups to obtain information on physical conditions in the corona by means of active radar soundings. While echoes from the Sun were unquestionably detected. difficulties in their interpretation led to inconclusive results. A major hindrance to these efforts was the limited understanding of the day-to-day structure of the corona then available (e.g., pioneering work in solar wind studies were just underway. and coronal holes had not yet been discovered). With the end of the Cold War, the very large over-the-horizon (OTH) radars operated by the Air Force have been opened up to basic science research through the end of the fiscal year. In light of advances made in coronal physics and in signal processing technology since these early experiments were undertaken. access to the state-of-the art OTH-B radar offers a rare opportunity to gauge anew the scientific potential for radar sounding of the Sun. In principle, it should be possible to obtain useful data on plasma densities and motions over a range of heights in the corona near 0.5R(solar mass) above the solar surface We report here the preliminary findings from a sequence of observations taken over the course of a solar rotation.

Pizzo, V. J.↗

DOE OSTI2023

Geolocation tracking for human identification and activity recognition using radar deep transfer learning

Abstract Human identification and activity recognition (HIAR) is crucial for many applications, such as surveillance, smart homes, and assisted living. As a sensing modality, radar has many unique characteristics including privacy protection, and contactless sensing. Single classification systems have shown to be accurate, but for long‐term solutions both human identification (ID) and human activity recognition (HAR) will need to be integrated in one system where it can be utilised simultaneously. In this article, a novel radar‐based human tracking system is presented where three classifiers are utilised to identify the subject and his/her behaviour. For any kind of motion, the system tracks the subject and detect the type of his/her motion. Based on the detected type of motion, the three classifiers are utilised for identification and activity recognition. The classifiers are built utilising deep transfer learning where three radar datasets are established to train and validate each of the deep networks. To recognise six activities and 10 human subjects, the three classifiers, namely, HAR, Gait ID, and Heart sound ID, achieve superior performance compared to the best reported results in literature with classification accuracies of 97.6%, 100%, and 41.8% respectively. Three successful examples are presented to demonstrate the introduced concept.

Alkasimi, Ahmad↗

NASA NTRS2019

SMAP science recovery efforts

The Soil Moisture Active Passive (SMAP) spacecraft launched in January 2015, with a mission to produce global soil moisture maps every 1.5 days using a combination of active (radar) and passive (radiometer) L-band measurements. In July 2015, after 2.5 months in operation, the radar failed and was not able to transmit. While the radiometer was still producing excellent science measurements, the need to recover key active-passive soil moisture requirements was paramount. To that end, the science team found that the European Space Agency (ESA) had recently launched a C-band SAR spacecraft called Sentinel-1A (launched April 2014) in a similar orbit, which was seen as a potential replacement to the “active” part of the SMAP measurements. An analysis was performed to see what the resulting spatial and temporal coverage could be. The promising results of that coupled with the ramp up in global coverage from Sentinel-1A and 1B (launched April 2016) allowed SMAP to create a new joint science data product that strives to meet the original mission objectives. The joint product is now part of the routine release of SMAP data to the science community as of June 2018.

Ballard, Christopher G.↗

NASA NTRS1989

Results of the 1988 NASA/JPL airborne SAR calibration campaign

During the spring of 1988, the NASA/JPL multifrequency, multipolarization SAR (synthetic aperture radar) flew in series of calibration experiments over the Goldstone dry lake bed. An array of calibration devices was deployed, including dihedral and trihedral corner reflectors, polarimetric active radar calibrators, passive receivers, and CW (continuous wave) tone generators. The aim of the campaign was to calibrate both amplitude and phase of the resulting SAR images, over long and short time scales. The results of the analysis of the calibration data collected in the spring of 1988 are presented. Trihedral corner reflector signatures and certain image background measures are used to externally calibrate relative amplitude and phase between polarizations at a given frequency, and to calibrate across frequencies. Assessments are made of the calibration accuracy as a function of image frame position for each frequency, and the stability of the radar calibration over long and short time-scales.

Freeman, A.↗

NASA NTRS1992

Evaluation of the TOPSAR performance by using passive and active calibrators

The preliminary analysis of the C-band cross-track interferometric data (XTI) acquired during the MAC Europe 1991 campaign over the Matera test site, in Southern Italy is presented. Twenty three passive calibrators (Corner Reflector, CR) and 3 active calibrators (Active Radar Calibrator, ARC) were deployed over an area characterized by homogeneous background. Contemporaneously to the flight, a ground truth data collection campaign was carried out. The research activity was focused on the development of motion compensation algorithms, in order to improve the height measurement accuracy of the TOPSAR system.

Alberti, G.↗

NASA NTRS2014

Soil Moisture Data Assimilation in the NASA Land Information System for Local Modeling Applications and Improved Situational Awareness

As part of the NASA Soil Moisture Active Passive (SMAP) Early Adopter (EA) program, the NASA Shortterm Prediction Research and Transition (SPoRT) Center has implemented a data assimilation (DA) routine into the NASA Land Information System (LIS) for soil moisture retrievals from the European Space Agency's Soil Moisture Ocean Salinity (SMOS) satellite. The SMAP EA program promotes application‐driven research to provide a fundamental understanding of how SMAP data products will be used to improve decision‐making at operational agencies. SPoRT has partnered with select NOAA/NWS Weather Forecast Offices (WFOs) that use output from a real‐time regional configuration of LIS, without soil moisture DA, to initialize local numerical weather prediction (NWP) models and enhance situational awareness. Improvements to local NWP with the current LIS have been demonstrated; however, a better representation of the land surface through assimilation of SMOS (and eventually SMAP) retrievals is expected to lead to further model improvement, particularly during warm‐season months. SPoRT will collaborate with select WFOs to assess the impact of soil moisture DA on operational forecast situations. Assimilation of the legacy SMOS instrument data provides an opportunity to develop expertise in preparation for using SMAP data products shortly after the scheduled launch on 5 November 2014. SMOS contains a passive L‐band radiometer that is used to retrieve surface soil moisture at 35‐km resolution with an accuracy of 0.04 cu cm cm (exp -3). SMAP will feature a comparable passive L‐band instrument in conjunction with a 3‐km resolution active radar component of slightly degraded accuracy. A combined radar‐radiometer product will offer unprecedented global coverage of soil moisture at high spatial resolution (9 km) for hydrometeorological applications, balancing the resolution and accuracy of the active and passive instruments, respectively. The LIS software framework manages land surface model (LSM) simulations and includes an Ensemble Kalman Filter for conducting land surface DA. SPoRT has added a module to read, quality‐control and bias‐correct swaths of Level II SMOS soil moisture retrievals prior to assimilation within LIS. The impact of SMOS DA is being tested using the Noah LSM. Experiments are being conducted to examine the impacts of SMOS soil moisture DA on the resulting LISNoah fields and subsequent NWP simulations using the Weather Research and Forecasting (WRF) model initialized with LIS‐Noah output. LIS‐Noah soil moisture will be validated against in situ observations from Texas A&M's North American Soil Moisture Database to reveal the impact and possible improvement in soil moisture trends through DA. WRF model NWP case studies will test the impacts of DA on the simulated near‐surface and boundary‐layer environments, and precipitation during both quiescent and disturbed weather scenarios. Emphasis will be placed on cases with large analysis increments, especially due to contributions from regional irrigation patterns that are not represented by precipitation input in the baseline LIS‐Noah run. This poster presentation will describe the soil moisture DA methodology and highlight LIS‐Noah and WRF simulation results with and without assimilation.

Case, Jonathan L.↗

NASA NTRS1991

A new system model for radar polarimeters

The validity of the 2 x 2 receive R and transmit T model for radar polarimeter systems, first proposed by Zebker et al. (1987), is questioned. The model is found to be invalid for many practical realizations of radar polarimeters, which can lead to significant errors in the calibration of polarimetric radar images. A more general model is put forward, which addresses the system defects which cause the 2 x 2 model to break down. By measuring one simple parameter from a polarimetric active radar calibration (PARC), it is possible to transform the scattering matrix measurements made by a radar polarimeter to a format compatible with a 2 x 2 R and T matrix model. Alternatively, the PARC can be used to verify the validity of the 2 x 2 model for any polarimetric radar system. Recommendations for the use of PARCs in polarimetric calibration and to measure the orientation angle of the horizontal (H) and vertical (V) coordinate system are also presented.

Freeman, Anthony↗

NASA NTRS1988

The use of a helicopter mounted ranging scatterometer for estimation of extinction and scattering properties of forest canopies-II: Experimental results for high-density aspen

An analytic expression is derived that describes the backscatter power from a semi-infinite plane parallel homogeneous canopy as a function of distance from an airborne radar. This model is fitted to observed data for a high-density aspen canopy by a modification of a technique developed by Tyapkin (1960). This inversion of the model provides unbiased estimates of the canopy extinction and backscattering parameters. An active radar calibrator located underneath the canopy provides an independent method of determining the volume extinction coefficient. The results reported indicate that the coefficients change throughout the year. A comparison of these coefficients with Eom and Funk's (1984) disk model, using measured canopy properties, shows that at C-band frequency, only a part of the scattering and absorption can be attributed to the canopy leaves.

Pitts, David E.↗

NASA NTRS2020

NISAR flight feed passive antenna measurements

NISAR (NASA ISRO SAR, National Aeronautics and Space Administration, Indian Space Research Organization, Synthetic Aperture Radar) is an Earth science project currently in its final development phase at NASA Jet Propulsion Laboratory (JPL) and at ISRO. Due for launch in 2022 it will assess how our planet changes over time by measuring differences in the Earth’s solid surface due to factors like climate change, movement and melting of glaciers, earthquakes, land-slides, deforestation, agriculture and others. The enabling instrument for this mission is a dual band radar (L-band and S-band) that feeds a 12m deployable mesh reflector. This paper describes the measurement campaign of the L-band flight feed in its passive configuration. Further measurements will be done using the antenna with the active radar components but they are not part of this paper.

Harrell, Jefferson A.↗

NASA NTRS2022

NISAR Flight Feed Passive Antenna Measurements

Harrell, Jefferson A.↗

NASA NTRS1988

Determination of the vertical pattern of the SIR-B antenna

Determination of the antenna pattern is important for a spaceborne Synthetic Aperture Radar such as Shuttle Imaging Radar-B (SIR-B). For SIR-B the antenna was so large that apart from one section, no complete pattern could be measured on the ground. Attempts were made to measure the pattern while the shuttle was in space by using ground receivers and active radar calibrators. The method used and described is a supplement to these measurements. The vertical pattern of an antenna can be extracted from radar signals returned from regions whose scattering coefficients versus incidence angle characteristics are suitably flat and uniform. The method used shows that the main vertical lobe of the SIR-B antenna is slightly wider than previously reported (6.9 deg at 3 dB points versus 6.2 deg used in radiometric corrections).

Moore, Richard K.↗

NASA NTRS1991

External calibration of polarimetric radars using point and distributed targets

Polarimetric calibration algorithms using combinations of point targets and reciprocal distributed targets are developed. From the reciprocity relations of distributed targets, and equivalent point target response is derived. Then the problem of polarimetric calibration using two point targets and one distributed target reduces to that using three point targets, which has been previously solved. For calibration using one point target and one reciprocal distributed target, two cases are analyzed with the point target being a trihedral reflector or a polarimetric active radar calibrator (PARC). For both cases, the general solutions of the system distortion matrices are written as a product of a particular solution and a matrix with one free parameter. For the trihedral-reflector case, this free parameter is determined by assuming azimuthal symmetry for the distributed target. For the PARC case, knowledge of one ratio of two covariance matrix elements of the distributed target is required to solve for the free parameter. Numerical results are simulated to demonstrate the usefulness of the developed algorithms.

Yueh, S. H.↗

NASA NTRS2016

Assessment of the SMAP Passive Soil Moisture Product

The National Aeronautics and Space Administration (NASA) Soil Moisture Active Passive (SMAP) satellite mission was launched on January 31, 2015. The observatory was developed to provide global mapping of high-resolution soil moisture and freeze-thaw state every two to three days using an L-band (active) radar and an L-band (passive) radiometer. After an irrecoverable hardware failure of the radar on July 7, 2015, the radiometer-only soil moisture product became the only operational Level 2 soil moisture product for SMAP. The product provides soil moisture estimates posted on a 36 kilometer Earth-fixed grid produced using brightness temperature observations from descending passes. Within months after the commissioning of the SMAP radiometer, the product was assessed to have attained preliminary (beta) science quality, and data were released to the public for evaluation in September 2015. The product is available from the NASA Distributed Active Archive Center at the National Snow and Ice Data Center. This paper provides a summary of the Level 2 Passive Soil Moisture Product (L2_SM_P) and its validation against in situ ground measurements collected from different data sources. Initial in situ comparisons conducted between March 31, 2015 and October 26, 2015, at a limited number of core validation sites (CVSs) and several hundred sparse network points, indicate that the V-pol Single Channel Algorithm (SCA-V) currently delivers the best performance among algorithms considered for L2_SM_P, based on several metrics. The accuracy of the soil moisture retrievals averaged over the CVSs was 0.038 cubic meter per cubic meter unbiased root-mean-square difference (ubRMSD), which approaches the SMAP mission requirement of 0.040 cubic meter per cubic meter.

passive↗

NASA NTRSDate not supplied

A Comprehensive Forward Model for Spaceborne Radar Instruments

We present the development and validation of a comprehensive forward model designed to enhance remote sensing capabilities of spaceborne radar instruments. To overcome limitations in existing models, we integrated a Discrete Dipole Approximation (DDA) cloud scattering database into our Radiative Transfer Model (RTM), focusing on microwave frequencies. By simulating the optical properties of non-spherical frozen hydrometeors, the DDA technique effectively reduced discrepancies between simulated and observed values, surpassing traditional Mie tables. The evaluation of DDA lookup tables involved comparisons with a collocated dataset comprising short-term forecasts and satellite microwave data, providing evidence of their superiority. Additionally, we address the challenges of assimilating active radar measurements, which offer vertically resolved insights into clouds and precipitation. We explored the assimilation of spaceborne radar measurements in Numerical Weather Prediction (NWP) models by integrating a forward radar model, along with its adjoint and tangent linear, into the data assimilation system. Evaluation using CloudSat measurements demonstrated promising agreement between simulations and observations, particularly when the input hydrometeor profiles aligned with the measured reflectivity profiles, showcasing the potential of the developed forward radar model. Moreover, we discuss other challenges in radar measurement assimilation within NWP models, including potential observation errors and biases.

Isaac Moradi↗

NASA NTRS1985

A preliminary report on the measurements of forest canopies with C-band radar scatterometer at NASA/NSTL

This paper presents preliminary results of C-band radar scatterometer measurements of forest canopies of southeastern forests in the vicinity of NASA/NSTL. The results are as follows: (1) the radar backscattering coefficients (BSC) of deciduous forests such as oak, maple, blackgum, and cypress are higher than those of coniferous forests such as slash pine plantation and natural pine; (2) at a large incidence angle, where polarization effect is significant, and by ranging measurement, the VV polarization BSC obtain peak value at the first few meters from the canopy top and decrease rather quickly, while the HH polarization BSC obtain peak value at longer distances from the canopy top and decrease rather slowly through the canopy; and (3) using the active radar calibrator for tree canopy attenuation measurement of a dense and a sparse live oak, it is found that the tree canopies with higher attenuations have higher BSC for all three polarizations, with VV polarization containing the largest differential (2.2 dB).

Wu, S. T.↗

NASA NTRS2018

An Initial Assessment of a SMAP Soil Moisture Disaggregation Scheme Using TIR Surface Evaporation Data over the Continental United States

The Soil Moisture Active Passive (SMAP) mission is dedicated toward global soil moisture mapping. Typically, an L-band microwave radiometer has spatial resolution on the order of 36-40 km, which is too coarse for many specific hydro-meteorological and agricultural applications. With the failure of the SMAP active radar within three months of becoming operational, an intermediate (9-km) and finer (3-km) scale soil moisture product solely from the SMAP mission is no longer possible. Therefore, the focus of this study is a disaggregation of the 36-km resolution SMAP passive-only surface soil moisture (SSM) using the Soil Evaporative Efficiency (SEE) approach to spatial scales of 3-km and 9-km. The SEE was computed using thermal-infrared (TIR) estimation of surface evaporation over Continental U.S. (CONUS). The disaggregation results were compared with the 3 months of SMAP-Active (SMAP-A) and Active/Passive (AP) products, while comparisons with SMAP-Enhanced (SMAP-E), SMAP-Passive (SMAP-P), as well as with more than 180 Soil Climate Analysis Network (SCAN) stations across CONUS were performed for a 19 month period. At the 9-km spatial scale, the TIR-Downscaled data correlated strongly with the SMAP-E SSM both spatially (r = 0.90) and temporally (r = 0.87). In comparison with SCAN observations, overall correlations of 0.49 and 0.47; bias of −0.022 and −0.019 and unbiased RMSD of 0.105 and 0.100 were found for SMAP-E and TIR-Downscaled SSM across the Continental U.S., respectively. At 3-km scale, TIR-Downscaled and SMAP-A had a mean temporal correlation of only 0.27. In terms of gain statistics, the highest percentage of SCAN sites with positive gains (>55%) was observed with the TIR-Downscaled SSM at 9-km. Overall, the TIR-based downscaled SSM showed strong correspondence with SMAP-E; compared to SCAN, and overall both SMAP-E and TIR-Downscaled performed similarly, however, gain statistics show that TIR-Downscaled SSM slightly outperformed SMAP-E.

Disaggregation↗

NASA NTRS1987

Modeling the interactions between the ocean and the environment for microwave radar sensing

An extensive set of X-band microwave backscatter measurements has been analyzed to determine its dependence on winds near the surface, atmospheric stability, and long-wave slopes. These radar measurements, made from a tower in the Gulf of Mexico, were performed in conjunction with an extensive set of simultaneous environmental measurements. The CW microwave system operated at an incidence angle of 45 deg, with antennas directed into winds and waves. Model functions for the radar cross section (RCS) and the modulation transfer function (MTF) are developed that depend on the geophysical variables, including wind stress. Statistical analysis shows that these models functions yield a significant smaller error when fit to the RCS data than a simple wind-speed function displays. A Taylor-series expansion of the returned power from a small area provides a unified function that demonstrates the complementary roles of wave slope and atmospheric fluctuations on both the RCS, the MTF, and the coherence. The issue of linearity of the MTF is addressed with this data set, yielding evidence that this is a valid assumption. These results have direct application to the remote sensing of the mean and fluctuating winds, and the wave spectrum with coherent and incoherent active radars.

Weissman, David E.↗