Recirculation effects produced by a pair of heated jets impinging on a ground plane
Exhaust recirculation effects produced by two heated jets impinging on ground plane
Hall, G. R.↗
SEARCH · Search NASA
Results for “recirculation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Empirically determined wind and scale effects on hot gas recirculation characteristics of jet V/STOL aircraft
Empirically determined wind and scale effects on hot gas recirculation characteristics of jet V/STOL aircraft
Cosgrove, W. J.↗
Base recirculation flow prediction using a time-dependent finite-difference technique Final report
Numerical determination of three dimensional base recirculation gas flow from multiple clustered nozzles
Waldrop, W. R.↗
Scaling of VTOL recirculation effects
Scaling comparison of recirculation effects of VTOL YJ-85 lift engine pod with similar small-scale simulated engine pod
Hall, G. R.↗
Recirculation patterns in confined laminar jet mixing
Recirculation patterns in coaxial steady laminar mixing of homogeneous jets in confined tube, solving Navier-Stokes equations
Lavan, Z.↗
Recirculation of energetic particles in Jupiter's magnetosphere
A significant new finding from analysis of Pioneer 11 observations in the magnetosphere of Jupiter is that there is net streaming of both electrons E above 40 keV and E above 560 keV and protons in the range from .61 to 3.41 MeV away from the planet along high-latitude field lines. This result is compatible with the recent suggestion of Nishida that energetic particles undergo trans-L shell diffusion at low altitudes without significant change of energy. This provides a plausible explanation for the remarkable pitch angle distributions near the equator in the range of L values from 12 to 25; the presence of particles of about 1 MeV energy at the outer edge of the magnetosphere; and hence, via conventional inward diffusion processes, the presence of those having magnetic moments of several hundred MeV per gauss in the inner magnetosphere. The recirculation of energetic particles emerges as an important dynamical feature of the Jovian magnetosphere.-
Sentman, D. D.↗
Recirculating sprayer for fiber-filled paints
Recirculating paint sprayer applies spray of coarse filler in highly volatile solvent. Sprayer was developed for applying insulation material containing epxoy resin, glass fibers, and inert fillers suspended in chlorinated solvents. Sprayer resists abrasive action of fiberglass filler and chemical activity of solvent. Pump and position ensure more uniform pressure at spray gun without backpressure regulator, which tended to clog in old sprayer.
Major, R. K.↗
Numerical computations of swirling recirculating flow
Swirling, recirculating, nonreacting flows were computed using a 2D elliptic program consisting of three tasks. The computations in Task 1 and 2 were made using an independent analysis for the two coaxial swirling flows. The Task 2 computations were made using the measured profiles of the mixing region. In Task 3, a modified 2D elliptic program was employed to include the effects of interaction between the inner and outer streams.
Srinivasan, R.↗
Experimental investigation of reactive turbulent recirculating jet mixing in a dump
A ducted, subsonic, hydrogen air turbulent jet mixing flowfield was investigated, both with and without combustion. The geometric configuration was representative of a sudden expansion or dump combustor, with a central air jet surrounded by a low velocity hydrogen stream at an overall equivalence ratio of 0.12. The ratio of the duct to inner nozzle diameter was 2.5. Radial distributions of mean axial and radial velocity, axial and radial turbulent intensity, velocity cross correlation, gas composition, static temperature and total pressure, as well as axial distributions of wall static pressure, were obtained for axial stations from zero to six duct diameters from the combustor entrance. The data indicate that mixing is slower in the chemically reactive flow field than in the nonreactive flow field, and that the presence of combustion has a significant effect on the size and location of the recirculation zone within the mixing duct.
Smith, G. D.↗
A Computer Code for Swirling Turbulent Axisymmetric Recirculating Flows in Practical Isothermal Combustor Geometries
A primitive pressure-velocity variable finite difference computer code was developed to predict swirling recirculating inert turbulent flows in axisymmetric combustors in general, and for application to a specific idealized combustion chamber with sudden or gradual expansion. The technique involves a staggered grid system for axial and radial velocities, a line relaxation procedure for efficient solution of the equations, a two-equation k-epsilon turbulence model, a stairstep boundary representation of the expansion flow, and realistic accommodation of swirl effects. A user's manual, dealing with the computational problem, showing how the mathematical basis and computational scheme may be translated into a computer program is presented. A flow chart, FORTRAN IV listing, notes about various subroutines and a user's guide are supplied as an aid to prospective users of the code.
Lilley, D. G.↗
The turbulent recirculating flow field in a coreless induction furnace. A comparison of theoretical predictions with measurements
A mathematical representation for the electromagnetic force field and the fluid flow field in a coreless induction furnace is presented. The fluid flow field was represented by writing the axisymmetric turbulent Navier-Stokes equation, containing the electromagnetic body force term. The electromagnetic body force field was calculated by using a technique of mutual inductances. The kappa-epsilon model was employed for evaluating the turbulent viscosity and the resultant differential equations were solved numerically. Theoretically predicted velocity fields are in reasonably good agreement with the experimental measurements reported by Hunt and Moore; furthermore, the agreement regarding the turbulent intensities are essentially quantitative. These results indicate that the kappa-epsilon model provides a good engineering representation of the turbulent recirculating flows occurring in induction furnaces. At this stage it is not clear whether the discrepancies between measurements and the predictions, which were not very great in any case, are attributable either to the model or to the measurement techniques employed.
El-Kaddah, N.↗
Confined Turbulent Swirling Recirculating Flow Predictions
Turbulent swirling flow, the STARPIC computer code, turbulence modeling of turbulent flows, the k-xi turbulence model and extensions, turbulence parameters deduction from swirling confined flow measurements, extension of the k-xi to confined swirling recirculating flows, and general predictions for confined turbulent swirling flow are discussed.
Abujelala, M. T.↗
A multilevel-multigrid technique for recirculating flows
A solution algorithm has been developed for the prediction of recirculating flows. Brandt's multilevel acceleration technique is used with Leonard's QUICK differencing scheme and a modified pressure implicit operator splitting scheme. Intermediate calculations enable a tau error distribution to be used for the identification of regions for local grid refinement, i.e., multigrid. The algorithm was tested for the prediction of laminar flow in a shear-driven and a buoyancy-driven cavity.
Phillips, R. E.↗
Improved numerical methods for turbulent viscous recirculating flows
The hybrid-upwind finite difference schemes employed in generally available combustor codes possess excessive numerical diffusion errors which preclude accurate quantative calculations. The present study has as its primary objective the identification and assessment of an improved solution algorithm as well as discretization schemes applicable to analysis of turbulent viscous recirculating flows. The assessment is carried out primarily in two dimensional/axisymetric geometries with a view to identifying an appropriate technique to be incorporated in a three-dimensional code.
Turan, A.↗
Transport models of the turbulent velocity-temperature products for computations of recirculating flows
Performance tests of the third-order turbulence closure for predictions of separating and recirculating flows in backward-facing steps were studied. Computations of the momentum and temperature fields in the flow domain being considered entail the solution of time-averaged transport equations containing the second-order turbulent fluctuating products. The triple products, which are responsible for the diffusive transport of the second-order products, attain greater significance in separating and reattaching flows. The computations are compared with several algebraic models and with the experimental data. The prediction was improved considerably, particularly in the separated shear layer. Computations are further made for the temperature-velocity double products and triple products. Finally, several advantages were observed in the usage of the transport equations for the evaluation of the turbulence triple products; one of the most important features is that the transport model can always take the effects of convection and diffusion into account in strong convective shear flows such as reattaching separated layers while conventional algebraic models cannot account for these effects in the evaluation of turbulence variables.
Amano, R. S.↗
Experimental verification of a secondary recirculation zone in a labyrinth seal
The existence of a secondary recirculation zone inside the cavities of a labyrinth seal operating at a Reynolds number of 15,000 and a Taylor number of 10,300 has been experimentally verified. A three-dimensional laser Doppler anemometer system was used to measure the complete mean velocity and Reynolds stress tensor distributions in the first, third, fifth and seventh cavities of a seven cavity labyrinth seal which had a clearance of 1.27 mm.
Morrison, G. L.↗
Improved numerical methods for turbulent viscous recirculating flows
The objective of the present study is to improve both the accuracy and computational efficiency of existing numerical techniques used to predict viscous recirculating flows in combustors. A review of the status of the study is presented along with some illustrative results. The effort to improve the numerical techniques consists of the following technical tasks: (1) selection of numerical techniques to be evaluated; (2) two dimensional evaluation of selected techniques; and (3) three dimensional evaluation of technique(s) recommended in Task 2.
Vandoormaal, J. P.↗
AMTEC recirculating test cell component testing and operation
Alkali metal thermoelectric converter operation in a recirculating test cell (RTC), which requires a small electromagnetic pump (EM) and a high-temperature beta-double-prime alumina-solid-electrolyte (BASE)-to-metal seal, is discussed. The design of a pump and an active metal braze seal and the initial operation of a cell using these components are described. The pump delivered 0.25 cu cm/min against a 28-psia head. A braze seal system was selected after shear strength tests of Ta or Nb brazed to BASE by a variety of fillers including TiCuNi, TiNi, and TiNiCr. The TiCuNi filler was chosen for environment cell testing and showed no failure or observable degradation after short-term tests up to 1055 K. The pump and the Nb/TiCuNi/BASE seal were used in a test that demonstrated all the operational functions of the RTC for the first time. An increase in the radiation reduction factor at constant input power was observed, indicating that the condenser was being wet by sodium resulting in an increased reflectivity.
Underwood, M. L.↗