Search NASA⌕ Search

SEARCH · Search NASA

Results for “rectifiers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Secondary Active Rectifier Control Scheme for a Wireless Power Transfer System with Double-Sided LCC Compensation Topology

This paper proposes a secondary control method using an active rectifier for a double-sided LCC tuned wireless power transfer system (WPT) to reduce the communication requirements of the system. As the active rectifier regulates the output power with a constant primary coil current, the secondary circulating time interval is adjusted while maintaining a unity power factor. First, circuit modelling and sensitivity analyses for the voltage gain, input impedance, coil current rating and power transfer are investigated with a design example of 20kW WPT. Subsequently, the control scheme is developed by considering the four operation modes with the phase difference as the control variable. To prove the effectiveness of the proposed control method, a simulation model is built, and the results demonstrate good dynamic performance with high accuracy for voltage regulation. Compared with the conventional secondary control, it improves the performance of the system along with a well-developed converter gain by maintaining the equivalent load resistive and reduced circulating time intervals, which further improves the system efficiency. The proposed system also eliminates the need for an additional de/de converter on the secondary side.

Zou, Shenli↗

Secondary-Side Active Rectifier Synchronization and Control in LCC-LC Compensated Inductive Power Transfer Systems

This paper proposes a communication-less synchronization and output power control strategy for LCC-LC compensated inductive power transfer systems with a secondaryside active rectifier. By replacing the passive rectifier with an active bridge, the proposed architecture eliminates the need for a separate secondary-side DC-DC converter and enables direct regulation of battery power. The key challenge in such a system is achieving robust synchronization of the secondary active bridge with the primary inverter without access to primary-side signals. To address this issue, the secondary-side variables are analyzed and the current through the secondary series inductor is identified as a load-independent synchronization variable with a fixed phase relationship to the primary excitation. A fixed-frequency second order generalized (SOGI)-based phase locked loop (PLL) is used to estimate the switching phase and frequency, and a phase-shift-based output power controller is developed using a phasor-transformer model of the active bridges. A modified control formulation is further introduced to remove phase-dependent loop-gain variation and simplify controller design. Simulation results validate the proposed method under both fixed and varying switching-frequency conditions, demonstrating successful frequency tracking from 82 kHz to 88 kHz and accurate output power regulation over a wide operating range. The proposed method offers a compact and effective solution for high-power IPT systems by enabling secondary-side synchronization and control without wireless communication or an additional DC-DC conversion stage.

Fernandes, Arnold Anthony [ORNL] (ORCID:0009000631↗

Noise rectifier based on the two-dimensional electron gas

The dc voltage observed at low temperatures in a 2D electron sample in the absence of noticeable external excitations [1] is accounted by the Schottky contact rectification of the noise generated in the measuring circuit. The rectified voltage is shown to depend on the asymmetry of the contact pair. The dependence of the rectified voltage on the noise amplitude first follows the trivial quadratic law, then exhibits a nearly linear behavior, and finally, levels off.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Non-equilibrium 1/f noise in rectifying nanopores

We report a single rectifying conically shaped nanopore system with ion current fluctuations whose 1/f noise characteristics observed at low frequencies are voltage dependent. Switching the voltage polarity allows one to switch between a system that produces equilibrium and nonequilibrium 1/f ion current fluctuations. The nonequilibrium fluctuations in the high-conductance state of the device are characterized by exponential dependence of the normalized power spectrum on voltage. The asymmetric 1/f noise is found characteristic for rectifying polymer nanopores and absent in pores with Ohmic current-voltage curves.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Noise Properties of Rectifying Nanopore

Ion currents through three types of rectifying nanoporous structures are studied and compared: conically shaped polymer nanopores, glass nanopipettes, and silicon nitride nanopores. Time signals of ion currents are analyzed by the power spectrum. We focus on the low-frequency range where the power spectrum magnitude scales with frequency, f, as 1/f. Glass nanopipettes and polymer nanopores exhibit nonequilibrium 1/f noise; thus, the normalized power spectrum depends on the voltage polarity and magnitude. In contrast, 1/f noise in rectifying silicon nitride nanopores is of equilibrium character. Various mechanisms underlying the voltage-dependent 1/f noise are explored and discussed, including intrinsic pore wall dynamics and formation of vortices and nonlinear flow patterns in the pore. Experimental data are supported by modeling of ion currents based on the coupled Poisson-Nernst-Planck and Navier-Stokes equations. We conclude that the voltage-dependent 1/f noise observed in polymer and glass asymmetric nanopores might result from high and asymmetric electric fields, inducing secondary effects in the pore, such as enhanced water dissociation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Systems and methods of delivering rectified voltage to a load

A solid state light source driver circuit that operates in either a buck convertor or a boost convertor configuration is provided. The driver circuit includes a controller, a boost switch circuit and a buck switch circuit, each coupled to the controller, and a feedback circuit, coupled to the light source. The feedback circuit provides feedback to the controller, representing a DC output of the driver circuit. The controller controls the boost switch circuit and the buck switch circuit in response to the feedback signal, to regulate current to the light source. The controller places the driver circuit in its boost converter configuration when the DC output is less than a rectified AC voltage coupled to the driver circuit at an input node. The controller places the driver circuit in its buck converter configuration when the DC output is greater than the rectified AC voltage at the input node.

Palmer, Fred↗

The role of ERK-1/2 in the N/OFQ-induced inhibition of delayed rectifier potassium currents

Nociceptin/orphanin FQ (N/OFQ) is an endogenous opioid-like heptadecapeptide involved in many neurocognitive functions, including learning and memory. Our previous report showed that N/OFQ inhibits the delayed rectifier potassium current (I{sub K}), and this effect is associated with protein kinase C (PKC) activation. Therefore, we wanted to determine if extracellular signal-regulated kinase-1/2 (ERK-1/2) signaling is regulated by N/OFQ and associated with the effect of N/OFQ on the I{sub K}. In the current study, we tested if N/OFQ and two PKC activators [phorbol 12,13-dibutyrate (PDBu) and ingenol 3,20-dibenzoate (IDB)] affected the phosphorylation level of ERK-1/2 and its nuclear substrate, ETS-like transcription factor-1 (Elk-1), using western blots. In addition, we tested if ERK-1/2 affected the N/OFQ-induced inhibition of the I{sub K} by using whole-cell patch-clamp recordings in acutely dissociated rat parietal cortical neurons. We found that N/OFQ, PDBu, and IDB increased the amount of phosphorylated ERK-1/2 and Elk-1; U0126, a specific inhibitor for ERK-1/2, attenuated the inhibitory effect of N/OFQ on the I{sub K}. These data suggest that the ERK-1/2 pathway, at least in part, mediates the inhibitory effect of N/OFQ on the I{sub K} in acutely dissociated rat cerebral parietal cortical neurons.

60 APPLIED LIFE SCIENCES↗

Inverse agonist-like action of cadmium on G-protein-gated inward-rectifier K{sup +} channels

Highlights: {yields} We examined allosteric control of K{sup +} channel gating. {yields} We identified a high-affinity site for Cd{sup 2+} to inhibit Kir3.2 activity. {yields} The 6-coordination geometry supports the binding. {yields} Cd{sup 2+} inhibits Kir3.2 by trapping the conformation in the closed state. -- Abstract: The gate at the pore-forming domain of potassium channels is allosterically controlled by a stimulus-sensing domain. Using Cd{sup 2+} as a probe, we examined the structural elements responsible for gating in an inward-rectifier K{sup +} channel (Kir3.2). One of four endogenous cysteines facing the cytoplasm contributes to a high-affinity site for inhibition by internal Cd{sup 2+}. Crystal structure of its cytoplasmic domain in complex with Cd{sup 2+} reveals that octahedral coordination geometry supports the high-affinity binding. This mode of action causes the tethering of the N-terminus to CD loop in the stimulus-sensing domain, suggesting that their conformational changes participate in gating and Cd{sup 2+} inhibits Kir3.2 by trapping the conformation in the closed state like 'inverse agonist'.

60 APPLIED LIFE SCIENCES↗

Understanding of self-terminating pulse generation using silicon controlled rectifier and RC load

Recently a silicon controlled rectifier (SCR)-based circuit that generates self-terminating voltage pulses was employed for the detection of light and ionizing radiation in pulse mode. The circuit consisted of a SCR connected in series with a RC load and DC bias. In this paper, we report the investigation of the physics underlying the pulsing mechanism of the SCR-based. It was found that during the switching of SCR, the voltage across the capacitor increased beyond that of the DC bias, thus generating a reverse current in the circuit, which helped to turn the SCR off. The pulsing was found to be sustainable only for a specific range of RC values depending on the SCR’s intrinsic turn-on/off times. The findings of this work will help to design optimum SCR based circuits for pulse mode detection of light and ionizing radiation without external amplification circuitry.

36 MATERIALS SCIENCE↗

Isothermal current–voltage characteristics of high-voltage 4H-SiC junction barrier Schottky rectifiers

The forward-pulse isothermal current–voltage characteristics of 4H-SiC junction barrier Schottky rectifiers (JBSs) with a nominal blocking voltage of 1700 V are measured in the temperature range from–80 to +90°C (193–363 K) up to current densities j of ~5600 A/cm{sup 2} at–80°C and 3000 A/cm{sup 2} at +90°C. In these measurements, the overheating of the structures relative to the ambient temperature, ΔT, did not exceed several degrees. At higher current densities, the effective injection of minority carriers (holes) into the base of the structures is observed, which is accompanied by the appearance of an S-type differential resistance. The pulsed isothermal current–voltage characteristics are also measured at a temperature of 77 K.

36 MATERIALS SCIENCE↗

A High Power Density Single-Phase PWM Rectifier with Active Ripple Energy Storage

It is well known that there exist second-order harmonic current and corresponding ripple voltage on dc bus for single phase PWM rectifiers. The low frequency harmonic current is normally filtered using a bulk capacitor in the bus which results in low power density. This paper proposed an active ripple energy storage method that can effectively reduce the energy storage capacitance. The feed-forward control method and design considerations are provided. Simulation and 15 kW experimental results are provided for verification purposes.

25 ENERGY STORAGE↗

Dynamic characterization and performance evaluation of a 10-kW power take-off with mechanical motion rectifier for wave energy conversion

The power take-off (PTO) is a key component for wave energy converters. In this paper, a compact PTO with mechanical motion rectification rated at 10 kW is designed and prototyped, and characterized. A piecewise nonlinear dynamic model is established to describe its unique dynamic property. A linear hydraulic actuator is adopted in lab testing to drive the prototype and the unknown parameters of the dynamic model are identified. Further verification shows that the model can predict the dynamic performance of the PTO well. The test results show that the mechanical motion rectifier-based PTO can achieve overall energy transfer efficiency as high as 65% in regular waves even when the generator is working below the rated electric load and speed. In the irregular wave test, the PTO achieved the overall energy transfer efficiency of 54%, and the peak-to-average ratio acquired during the test is 12.5.

16 TIDAL AND WAVE POWER↗

Computational design of intrinsic molecular rectifiers based on asymmetric functionalization of N -phenylbenzamide

Here, we report a systematic computational search of molecular frameworks for intrinsic rectification of electron transport. The screening of molecular rectifiers includes 52 molecules and conformers spanning over 9 series of structural motifs. N-Phenylbenzamide is found to be a promising framework with both suitable conductance and rectification properties. A targeted screening performed on 30 additional derivatives and conformers of N-phenylbenzamide yielded enhanced rectification based on asymmetric functionalization. We demonstrate that electron-donating substituent groups that maintain an asymmetric distribution of charge in the dominant transport channel (e.g., HOMO) enhance rectification by raising the channel closer to the Fermi level. These findings are particularly valuable for the design of molecular assemblies that could ensure directionality of electron transport in a wide range of applications, from molecular electronics to catalytic reactions.

36 MATERIALS SCIENCE↗

Rotation Driven by Rectified RF-sheath Potentials and Spatial Dispersion

Plasma rotation is of interest for improving confinement and stabilising plasma. Effects from fast particles with broad orbits can only partly explain the changes in the rotation profiles during ICRH. The effect on wave-particle interaction of a finite poloidal mode number is discussed and two new RF-mechanisms are proposed: Co-current torque caused by sputtering by rectified RF-sheath potentials and transport of momentum due to spatial dispersion. The latter effect affects the RF-current drive, in particular, in conjunction with mode conversion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Rectifying performance and negative differential behavior in graphite—chain—carbon nanotube junctions

In this paper, the (5, 5) capped carbon nanotubes (CNTs) in contact with different lengths of sp monoatomic chains grown on the surface of graphite substrate are fabricated and its electronic transport properties sandwiched between CNT and graphite electrodes are investigated. The first-principles calculations based on nonequilibrium Green's function in combination with density-functional theory show that their rectifying performance and negative differential resistance behavior are observed under very low biases and obviously are enhanced when the length increases. From our analysis, the charge transfer, transmission spectra, projected density of states and evolutions of molecular orbitals are responsible for these phenomena.

36 MATERIALS SCIENCE↗

Spin-filtering, giant magnetoresistance, rectifying and negative differential resistance effects in planar four-coordinate Fe complex with graphene nanoribbon electrodes

By using the nonequilibrium Green's function formalism combined with the density functional theory, we have investigated the spin-polarized transport properties of a planar four-coordinate Fe complex sandwiched between two zigzag-edge graphene nanoribbon (ZGNR) electrodes, where the ZGNRs are modulated by external magnetic field. The results show that the system can exhibit perfect dual spin-filtering and spin-rectifying effects at a wide bias range, giant magnetoresistance effect with large magnetoresistance ratio at small bias, and obvious negative differential resistance behavior. The mechanisms are proposed for these phenomena.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication of p-type ZnO nanofibers by electrospinning for field-effect and rectifying devices

Ce-doped p-type ZnO nanofibers were synthesized by electrospinning and followed calcinations. The surface morphology, elementary composition, and crystal structure of the nanofibers were investigated. The field effect curve confirms that the resultant Ce-doped ZnO nanofibers are p-type semiconductor. A p-n heterojunction device consisting of Ce-doped p-type ZnO nanofibers and n-type indium tin oxide (ITO) thin film was fabricated on a piece of quartz substrate. The current-voltage (I-V) characteristic of the p-n heterojunction device shows typical rectifying diode behavior. The turn-on voltage appears at about 7 V under the forward bias and the reverse current is impassable.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlation between the electron-phonon coupling and rectifying performance for poly(3-hexylthiophene)/n-type Si devices

A correlation between the electron-phonon coupling and rectifying performance is identified for poly(3-hexylthiophene) (P3HT)/n-type Si devices and an analysis using the temperature-dependent Hall-effect characteristics is presented. The carrier mobility in the P3HT film exhibits strong temperature dependence, indicating the dominance of tunneling. However, the incorporation of titanium oxide (TiO{sub 2}) nanoparticles into P3HT leads to the dominance of hopping. The results demonstrate that the incorporation of TiO{sub 2} nanoparticles into P3HT influences the electrical property of P3HT/n-type Si devices by the electron-phonon coupling modification and the increased spacing between molecules that serve to enhance the carrier mobility in P3HT.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗