Search NASA⌕ Search

SEARCH · Search NASA

Results for “redox shuttle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

A system for conducting igneous petrology experiments under controlled redox conditions in reduced gravity

The Space Shuttle and the planned Space Station will permit experimentation under conditions of reduced gravitational acceleration offering experimental petrologists the opportunity to study crystal growth, element distribution, and phase chemistry. In particular the confounding effects of macro and micro scale buoyancy-induced convection and crystal settling or flotation can be greatly reduced over those observed in experiments in the terrestrial laboratory. Also, for experiments in which detailed replication of the environment is important, the access to reduced gravity will permit a more complete simulation of processes that may have occurred on asteroids or in free space. A technique that was developed to control, measure, and manipulate oxygen fugacities with small quantities of gas which are recirculated over the sample. This system could be adaptable to reduced gravity space experiments requiring redox control.

Williams, Richard J.↗
NASA NTRS1986

A system for conducting igneous petrology experiments under controlled redox conditions in reduced gravity

The Space Shuttle and the planned Space Station will permit experimentation under conditions of reduced gravitational acceleration offering experimental petrologists the opportunity to study crystal growth, element distribution, and phase chemistry. In particular the confounding effects of macro and micro scale buoyancy-induced convection and crystal settling or floatation can be greatly reduced over those observed in experiments in the terrestrial laboratory. Also, for experiments in which detailed replication of the environment is important, the access to reduced gravity will permit a more complete simulation of processes that may have occurred on asteroids or in free space. A technique that was developed to control, measure, and manipulate oxygen fugacites with small quantities of gas which are recirculated over the sample is described. This system should be adaptable to reduced gravity space experiments requiring redox control. Experiments done conventionally and those done using this technique yield identical results done in a 1-g field.

Williams, R. J.↗
DOE OSTI2023

Suppressing the Shuttle Effects with FeCo/SPAN Cathodes and High-Concentration Electrolytes for High-Performance Lithium–Sulfur Batteries

The shuttle effects and the sluggish redox kinetics are two of the main challenges in lithium–sulfur (Li–S) batteries, which significantly reduce the capacity of the batteries and restrict their commercialization. Herein, FeCo/sulfurized polyacrylonitrile (SPAN) is synthesized as a cathode material via the electrospinning technique and a further heat treatment. Synchrotron X-ray absorption spectroscopy confirmed the existence of Fe–S/Fe and Co–S bonds in FeCo/SPAN, which benefit the adsorptive and catalytic activities toward lithium polysulfides (LiPSs). Here, we further investigated the effect of electrolyte concentration in inhibiting the shuttle of LiPSs in Li–S batteries. Small-angle X-ray scattering (SAXS) reveals that more contact ion pairs are formed and fewer free solvent molecules exist with the increase of the electrolyte concentration, which can inhibit the dissolution and shuttle of LiPSs. Finally, the batteries assembled with high-concentration electrolytes (3 M LiTFSI in DOL/DME) exhibit a higher specific capacity retention compared to those assembled with low-concentration electrolytes. This work enriches the route to prepare Li–S batteries with the rational design of cathode materials and electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2020

A redox-active organic cation for safer metallic lithium-based batteries

Safety concerns have severely impeded the practical application of high-energy-density lithium-based batteries. Dendrite growth and overcharging can lead to particularly catastrophic thermal failure. Here we report an organic cation, trisaminocyclopropenium (TAC), as a bi-functional electrolyte additive to suppress dendrite growth and offer reversible overcharge protection for metallic lithium-based batteries. During the Li plating process, TAC cations with aliphatic chains can form a positively charged electrostatic shield around Li protrusions, repelling the approaching Li + and thereby attaining a more uniform plating. A two times longer cycle life of 300 h at 1 mA cm -2 is achieved in a Li|Li symmetric cell in comparison with the control. During the overcharging process, the redox-active TAC can repeatedly shuttle between two electrodes, maintaining the cell voltage within a safe value. A solid protection of 117 cycles (~1640 h) at 0.2 C with a 100% overcharge is achieved in a LiFePO 4 /Li 4 Ti 5 O 12 cell. This study sheds fresh light on the ability of organic cations to build safer batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

3D printing of architected sulfur cathodes with dual-site atomic catalysts for accelerated polysulfide kinetics and Li-ion transport in high areal-loading lithium–sulfur batteries

The practical deployment of lithium–sulfur batteries (LSBs) is hindered by fundamental limitations in conventional slurry-cast cathodes, including poor sulfur utilization, sluggish ion transport, and low areal capacity, particularly in thick electrodes required for high energy density. To address these challenges, we present direct ink writing (DIW) as an additive manufacturing strategy to fabricate advanced current-collector-free, 3D-printed sulfur cathodes (3DP S@CoNi-DSACs/NC) with hierarchically porous architectures that enhance lithium-ion diffusion, promote electrolyte penetration, and reduce interfacial resistance. The synergistic effects of Co/Ni dual-atom sites accelerate redox kinetics and mitigate polysulfide shuttling. As a result, the optimized 3DP cathode with a sulfur loading of 5.4 mg cm −2 demonstrated excellent rate capability, delivering a high reversible capacity of 1041.4 mAh g −1 at 1C with 85.5% capacity retention after 1000 cycles, significantly outperforming its cast counterpart. Remarkably, even at a higher sulfur loading of 8.1 mg cm −2 , the 3DP cathode maintains outstanding performance, achieving a discharge capacity of 1538.4 mAh g −1 and an areal capacity of 12.5 mAh cm −2 at 0.1C. This study not only demonstrates the functional integration of catalytically active materials into 3D printable sulfur cathode architectures but also offers a scalable and transformative platform for building high-performance LSBs beyond conventional electrode manufacturing methods.

3D electrode↗
DOE OSTI2020

Microbial electro-photosynthesis

Methods and apparatus for growing photosynthetic organisms lacking Photosystem II (PSII) function using externally supplied electrons shuttled into the organism using redox mediators to improve photosynthetic output and to produce and recover chemicals of interest. By removing PSII, all PAR photons are funneled toward Photosystem I, thereby significantly increasing the theoretical photon utilization efficiency for CO2 fixation, energy storage and the capacity to synthesize valuable chemicals. Additional genetic modification can be performed to insert or enhance specific metabolic pathways to generate products of commercial interest.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Mediated Electrochemical Probing: A Systems-Level Tool for Redox Biology

Biology uses well-known redox mechanisms for energy harvesting (e.g., respiration), biosynthesis, and immune defense (e.g., oxidative burst), and now we know biology uses redox for systems-level communication. Currently, we have limited abilities to “eavesdrop” on this redox modality, which can be contrasted with our abilities to observe and actuate biology through its more familiar ionic electrical modality. In this Perspective, we argue that the coupling of electrochemistry with diffusible mediators (electron shuttles) provides a unique opportunity to access the redox communication modality through its electrical features. Here, we highlight previous studies showing that mediated electrochemical probing (MEP) can “communicate” with biology to acquire information and even to actuate specific biological responses (i.e., targeted gene expression). We suggest that MEP may reveal an extent of redox-based communication that has remained underappreciated in nature and that MEP could provide new technological approaches for redox biology, bioelectronics, clinical care, and environmental sciences.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Lignin-enhanced reduction of structural Fe(III) in nontronite: Dual roles of lignin as electron shuttle and donor

Lignin is a major component of plant-derived soil organic matter (SOM) in soils and sediments. Fe-bearing clay minerals are widely distributed in these environments and often co-exist with lignin. While previous studies have reported the electron shuttling and donating roles of certain redox-active SOM in the dissimilatory reduction of structural Fe(III) in Fe-bearing clay minerals, the role of lignin in this process remains unknown. Here we studied this role by incubating an Fe-rich smectite (nontronite NAu-2) with two types of lignin (soluble and insoluble) in the absence and presence of an Fe(III)-reducing bacterium Shewanella putrefaciens CN32 under anaerobic condition. Labile carbon source (i.e., lactate) was added in some experiments as an extra electron donor. The results demonstrated that both soluble and insoluble lignins abiotically reduced structural Fe(III) in NAu-2. The reduction extent was proportional to lignin concentration. After abiotic reaction, lignin served as either electron shuttle or electron donor in the presence of CN32: (1) When lactate was present, lignin served as an electron shuttle to enhance the rate of Fe(III) reduction; (2) When lactate was absent, lignin served as an electron donor for Fe(III) reduction. Although the biotic Fe(III) reduction extents were similar in the presence of either soluble or insoluble lignin, the reduction rates with soluble lignin were always higher than those with insoluble lignin, likely owing to their different electron transfer mechanisms. After interaction with NAu-2 and/or CN32, soluble lignin structure largely remained intact, but with some decreases of humic/fulvic acid-like and protein-like compounds, aromatic functional groups (e.g., C-H, C=O, COOH), and aliphatic/aromatic compounds. An increase of semiquinone-like organic radicals was observed after lignin interaction with NAu-2. These chemical changes of lignin were likely coupled with reduction of structural Fe(III) in nontronite. The nontronite structure remained largely unchanged without much dissolution and mineral transformation. The findings of this study provide insights into the role of lignin in promoting mineral-microbe interactions and have significant implications for coupled Fe and C biogeochemical cycles in soils and sediments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Solvent Dynamics in Gel Polymer Electrolytes for Lithium–Sulfur Batteries

Li−sulfur (Li−S) batteries are promising as the next-generation energy storage technology but face challenges due to sluggish sulfur redox reaction (SRR) kinetics and a sulfur shuttling effect. While many studies have explored polycaprolactone (PCL)-based gel polymer electrolytes (GPEs) to address these issues, the influence of solvent properties, including dielectric constant (ϵ) and donor and acceptor numbers (DN and AN), remain unexplored despite their critical impact on performance and full-scale implementation. This study systematically compares three distinct electrolytes, dimethoxyethane (DME), dimethyl sulfoxide (DMSO), and tetraethylene glycol dimethyl ether (TEGDME)-paired with PCL, to correlate the varied solvent properties and their effects on the physical properties of the GPE, in terms of Li + transport and solvation, and polysulfide’s confinement. Among them, the DME-based GPE, with an intermediate DN, exhibited the lowest crystallinity (2.31%), highest ionic conductivity (7.49 mS/cm), and high Li + transference number (0.77). As a result, it achieved a specific capacity of 795 mAh/g sulfur and an average Coulombic efficiency of 97.5% after 120 cycles at C/5, outperforming its competitors. Operando Raman and UV−vis spectroscopy confirmed that PCL effectively confines long-chain polysulfides within its network, mitigating the shuttle effect and facilitating reversible polysulfide conversion. These findings demonstrate that GPEs with moderate DN values and balanced ϵ significantly enhance stability, extend cycle life, and improve rate performance for Li−S batteries. This work provides valuable insights into the design of advanced electrolyte systems for practical energy storage applications.

25 ENERGY STORAGE↗
DOE OSTI2021

Biogeochemical dynamics and microbial community development under sulfate- and iron-reducing conditions based on electron shuttle amendment

Iron reduction and sulfate reduction are two of the major biogeochemical processes that occur in anoxic sediments. Microbes that catalyze these reactions are therefore some of the most abundant organisms in the subsurface, and some of the most important. Due to the variety of mechanisms that microbes employ to derive energy from these reactions, including the use of soluble electron shuttles, the dynamics between iron- and sulfate-reducing populations under changing biogeochemical conditions still elude complete characterization. Here, we amended experimental bioreactors comprised of freshwater aquifer sediment with ferric iron, sulfate, acetate, and the model electron shuttle AQDS (9,10-anthraquinone-2,6-disulfonate) and monitored both the changing redox conditions as well as changes in the microbial community over time. The addition of the electron shuttle AQDS did increase the initial rate of Fe III reduction; however, it had little effect on the composition of the microbial community. Our results show that in both AQDS- and AQDS+ systems there was an initial dominance of organisms classified as Geobacter (a genus of dissimilatory Fe III -reducing bacteria), after which sequences classified as Desulfosporosinus (a genus of dissimilatory sulfate-reducing bacteria) came to dominate both experimental systems. Furthermore, most of the ferric iron reduction occurred under this later, ostensibly “sulfate-reducing” phase of the experiment. This calls into question the usefulness of classifying subsurface sediments by the dominant microbial process alone because of their interrelated biogeochemical consequences. To better inform models of microbially-catalyzed subsurface processes, such interactions must be more thoroughly understood under a broad range of conditions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Transition Metal Dichalcogenides as Effective Catalysts for High-Rate Lithium–Sulfur Batteries

In today’s renaissance of high energy density secondary batteries, lithium-sulfur (Li-S) batteries represent one of the most promising candidates for the next generation of renewable energy storage systems, due to sulfur’s high theoretical specific capacity of 1675 mAh g -1 and high earth abundance. However, despite decades of study, the issues associated with capacity fade via the polysulfide shuttle and sluggish kinetics remain. Through a rigorous and detailed electrochemical study of lithium polysulfides via rotating disk electrode voltammetry (RDE), we have investigated the kinetics of the redox reactions, and explored candidate catalysts to potentially overcome/mitigate the polysulfide shuttle effect. From these RDE studies, supported by comprehensive electronic-structure calculations of conversion-type surface reactions, we determined that WSe 2 can effectively catalyze the polysulfide redox reaction, though further studies are necessary to improve overall Li-S battery performance.

25 ENERGY STORAGE↗
DOE OSTI2023

Poly(vinylferrocene) as an Ionomer and Sulfur-Confining Additive for Lithium–Sulfur Batteries

Lithium-sulfur (Li-S) batteries are promising owing to their high energy density, environmental benignity, and low cost. Most of the commonly used binders in Li-S battery cathodes are inert and have no significant effect on the challenges of sulfur as a cathode material, such as the polysulfide shuttle effect, low ionic/electronic conductivity, and a sluggish redox reaction. In this work, we demonstrate the use of poly(vinylferrocene) (PvFc) as a binder additive that can effectively increase the ionic conductivity of the cathode and act as a sulfide confining agent. Electrochemical tests performed with PvFc as part of the binder mixture used to cast the cathodes demonstrate an increase in rate capability and cycle life when compared to the baseline samples. Ionic conductivity measurements and X-ray photoelectron spectroscopy suggest that the π-cation molecular interaction between the cyclopentadienyl rings from ferrocene and Li + act like an ion couple with ferrocene acting as a static, covalently bound acceptor of Li + ions that enhances their mobility through the cathode. This coupled with the affinity between the ferrocenyl cations and the Li salt anions, which provides more distribution of counterions for Li + movement and improves accessibility to the cathode S reservoir, make PvFc a promising ionomer for Li-S batteries. In addition, the π-cation bonds between cyclopentadienyl and lithium polysulfides produce a sulfide confining effect that mitigates capacity fade through polysulfide dissolution. Furthermore, this work demonstrates an expansion in the utility of PvFc as a component in Li-ion batteries, which so far is mostly limited to use as an active material in organometallic batteries.

25 ENERGY STORAGE↗
DOE OSTI2026

Mitigation of polysulfide shuttle effect in Li-S batteries through catalytic disproportionation reaction

Polysulfides are poorly retained within porous cathodes and readily diffuse into the electrolyte over time, leading to the well-known shuttle effect that undermines the reversibility of Li-S batteries. Here, in this study, we demonstrate that catalytic disproportionation of polysulfides provides an effective pathway to suppress this process by rapidly converting dissolved species into solid sulfur and sulfides, thereby preventing their migration into the electrolyte. Fundamentally, the sluggish kinetics of sulfur redox reactions are responsible for the accumulation and redistribution of soluble polysulfides in the bulk electrolyte. By accelerating these kinetics, catalyzed disproportionation not only confines sulfur within the conductive cathode matrix but also promotes the homogeneous precipitation of Li₂S₂/Li₂S, which enhances electrochemical reversibility and cycling stability. Using nitrogen-doped carbon (NC800) as a model catalyst, we reveal its ability to drive a pseudo-16-electron reduction pathway, leading to a single dominant Li₂S product and uniform deposition within the porous framework. In contrast, a non-catalytic carbon (KB) yields multiple polysulfide intermediates and heterogeneous deposition. The mechanistic insights provided here highlight the pivotal role of catalytic disproportionation in reshaping sulfur redox pathways and offer a rational strategy for mitigating polysulfide shuttling in practical Li-S pouch cells.

25 ENERGY STORAGE↗
DOE OSTI2023

Electrolytes with Solvating Inner Sheath Engineering for Practical Na–S Batteries

Sodium–sulfur (Na–S) batteries with durable Na-metal stability, shuttle-free cyclability, and long lifespan are promising to large-scale energy storages. However, meeting these stringent requirements poses huge challenges with the existing electrolytes. Herein, a localized saturated electrolyte (LSE) is proposed with 2-methyltetrahydrofuran (MeTHF) as an inner sheath solvent, which represents a new category of electrolyte for Na–S system. Unlike the traditional high concentration electrolytes, the LSE is realized with a low salt-to-solvent ratio and low diluent-to-solvent ratio, which pushes the limit of localized high concentration electrolyte (LHCE). The appropriate molecular structure and solvation ability of MeTHF regulate a saturated inner sheath, which features a reinforced coordination of Na + to anions, enlarged Na + -solvent distance, and weakened anion-diluent interaction. Such electrolyte configuration is found to be the key to build a sustainable interphase and a quasi-solid–solid sulfur redox process, making a dendrite-inhibited and shuttle-free Na–S battery possible. With this electrolyte, pouch cells with decent cycling performance under rather demanding conditions are demonstrated.

25 ENERGY STORAGE↗
DOE OSTI2022

Development of high-energy non-aqueous lithium-sulfur batteries via redox-active interlayer strategy

Abstract Lithium-sulfur batteries have theoretical specific energy higher than state-of-the-art lithium-ion batteries. However, from a practical perspective, these batteries exhibit poor cycle life and low energy content owing to the polysulfides shuttling during cycling. To tackle these issues, researchers proposed the use of redox-inactive protective layers between the sulfur-containing cathode and lithium metal anode. However, these interlayers provide additional weight to the cell, thus, decreasing the practical specific energy. Here, we report the development and testing of redox-active interlayers consisting of sulfur-impregnated polar ordered mesoporous silica. Differently from redox-inactive interlayers, these redox-active interlayers enable the electrochemical reactivation of the soluble polysulfides, protect the lithium metal electrode from detrimental reactions via silica-polysulfide polar-polar interactions and increase the cell capacity. Indeed, when tested in a non-aqueous Li-S coin cell configuration, the use of the interlayer enables an initial discharge capacity of about 8.5 mAh cm −2 (for a total sulfur mass loading of 10 mg cm −2 ) and a discharge capacity retention of about 64 % after 700 cycles at 335 mA g −1 and 25 °C.

25 ENERGY STORAGE↗
DOE OSTI2021

Direct Cathode Recycling of End-Of-Life Li-Ion Batteries Enabled by Redox Mediation

The ongoing surge of electric vehicle (EV) adoption forecasts an unprecedented amount of lithium-ion battery wastes in the near future. Since cathode materials have the highest economic and engineering values, it is essential to recycle and reuse the end-of-life (EOL) cathode materials. Here, we show that redox mediators can deliver lithium ions and electrons from a lithium source to the cathode, efficiently relithiate the EOL cathode materials, and make them ready for new battery production after a postheat treatment. We have found that some quinone-based redox mediators, especially 3,5-di-tert-butyl-o-benzoquinone (DTBQ), can shuttle the charges very fast between Li metal and EOL cathode. Reduction of DTBQ on lithium is evidenced by chemical changes of Li metal and DTBQ, and successful relithiation of the EOL cathode by the subsequent oxidation of DTBQ is verified by electrochemical and structural evaluations.

battery recycling↗