SEARCH · Search NASA

Results for “regional specialization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Nighttime mesospheric returns associated with a large scale flare event

Magnetic storms associated with large flares can give D region ionization. Special measurements are made at night to evaluate the nature of mesospheric returns obtained under storm conditions. Five periods of time are tabulated varying in length from 20 min to 60 min at which scattered power is observed above the noise level. The three values of k(p) corresponding to the five periods are also given, as is the mean power over noise observed. The scattered powers from 78 to 81 km are comparable with those observed during the day, indicating that a similar ionization density is present. The peak power levels are approximately the same in both cases; but whereas the night data come from an essentially zero background, the day data arise from a substantial level of background scatter. This implies that the periods indicated are the only times at which any substantial particle precipitation is taking place; and that the consequent ionization is confined to the height region shown.

Bowhill, S. A.↗

DOE OSTI2023

Characterization of promoter elements of isoprene‐responsive genes and the ability of isoprene to bind START domain transcription factors

Abstract Isoprene has recently been proposed to be a signaling molecule that can enhance tolerance of both biotic and abiotic stress. Not all plants make isoprene, but all plants tested to date respond to isoprene. We hypothesized that isoprene interacts with existing signaling pathways rather than requiring novel mechanisms for its effect on plants. We analyzed the cis‐regulatory elements (CREs) in promoters of isoprene‐responsive genes and the corresponding transcription factors binding these promoter elements to obtain clues about the transcription factors and other proteins involved in isoprene signaling. Promoter regions of isoprene‐responsive genes were characterized using the Arabidopsis cis‐regulatory element database. CREs bind ARR1, Dof, DPBF, bHLH112, GATA factors, GT‐1, MYB, and WRKY transcription factors, and light‐responsive elements were overrepresented in promoters of isoprene‐responsive genes; CBF‐, HSF‐, WUS‐binding motifs were underrepresented. Transcription factors corresponding to CREs overrepresented in promoters of isoprene‐responsive genes were mainly those important for stress responses: drought‐, salt/osmotic‐, oxidative‐, herbivory/wounding and pathogen‐stress. More than half of the isoprene‐responsive genes contained at least one binding site for TFs of the class IV (homeodomain leucine zipper) HD‐ZIP family, such as GL2, ATML1, PDF2, HDG11, ATHB17. While the HD‐zipper‐loop‐zipper (ZLZ) domain binds to the L1 box of the promoter region, a special domain called the steroidogenic acute regulatory protein‐related lipid transfer, or START domain, can bind ligands such as fatty acids (e.g., linolenic and linoleic acid). We tested whether isoprene might bind in such a START domain. Molecular simulations and modeling to test interactions between isoprene and a class IV HD‐ZIP family START‐domain‐containing protein were carried out. Without membrane penetration by the HDG11 START domain, isoprene within the lipid bilayer was inaccessible to this domain, preventing protein interactions with membrane bound isoprene. The cross‐talk between isoprene‐mediated signaling and other growth regulator and stress signaling pathways, in terms of common CREs and transcription factors could enhance the stability of the isoprene emission trait when it evolves in a plant but so far it has not been possible to say what how isoprene is sensed to initiate signaling responses.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2024

Challenges and Solutions for Fast Neutron Irradiation of Bulk Material Specimens

Reactor developers continue to recognize opportunities for further enhancing fast spectrum reactor designs with advanced core materials, but all the material test reactors currently available to the United States are thermal spectrum designs. Fortunately, the Advanced Test Reactor and High Flux Isotope Reactor are versatile high flux facilities where spectral modification strategies can be used to reduce undesirable thermal neutron capture transmutation damage and augment fast flux delivered to specimens. New opportunities to leverage high flux regions and specially designed fast flux boosting experiment configurations can be used to achieve meaningful fast fluences on large specimens in ATR. New optimization potentials can be employed to achieve even higher fluences, albeit for smaller specimens, using thermal neutron filters in HFIR test positions. These capabilities, while not true fast reactors, can provide highly relevant environments for researchers needing to study the effects of fast neutron damage in bulk material specimens.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2024

Agent-based simulations of shared automated vehicle operations: reflecting travel-party size, season and day-of-week demand variations

Here, this paper explores the effects of day of week and season of year demand variations for shared rides, along with realistic travel party sizes, on shared autonomous vehicle (SAV) services across the Austin, Texas region. Using the agent-based POLARIS program, synthetic person-trips that reflect travel-party size (from one to four persons) and demand variations over days and months, as evident in the National Household Travel Survey data were simulated in each scenario over a 24 h travel day. Results show that realistic party sizes can bring considerable changes to SAV fleet performance, including up to 8.5% higher service rates (number of requests accepted within 15 min), 5 min shorter journey times (wait time + travel time), 28% higher vehicle occupancies on weekends, and roughly 4% lower empty fleet VMT. Weekend travel is most impacted by season of year, with weekday travel patterns looking more uniform (thanks to work and school trips). Various performance metrics for the Austin network, like total and empty VMT, change by up to 30% when considering realistic variations in party size and time of year. This paper underscores the value of recognizing day-to-day and month-to-month variations in travel demand, and the importance of agent-based model equations to reflect travel-party size. Such realism can help quantify SAV seat occupancies more accurately, highlighting the importance of shared mobility. However, it also creates demand and supply issues for operators that now need more information on party size to manage dynamic ride-sharing, or those that may wish to shift their fleet vehicles to other regions for special events to protect profits while offering reasonable wait times to customers throughout the year.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

BEACON—automated aberration correction for scanning transmission electron microscopy using Bayesian optimization

Aberration correction is an important aspect of modern high-resolution scanning transmission electron microscopy. Most methods of aligning aberration correctors require specialized sample regions and are unsuitable for fine-tuning aberrations without interrupting on-going experiments. Here, we present an automated method of correcting first- and second-order aberrations called BEACON, which uses Bayesian optimization of the normalized image variance to efficiently determine the optimal corrector settings. We demonstrate its use on gold nanoparticles and a hafnium dioxide thin film showing its versatility in nano- and atomic-scale experiments. BEACON can correct all first- and second-order aberrations simultaneously to achieve an initial alignment and first- and second-order aberrations independently for fine alignment. Ptychographic reconstructions are used to demonstrate an improvement in probe shape and a reduction in the target aberration.

techniques and instrumentation↗

DOE OSTI2023

MJL-1 is a nuclear envelope protein required for homologous chromosome pairing and regulation of synapsis during meiosis in C. elegans

Interactions between chromosomes and LINC (linker of nucleoskeleton and cytoskeleton) complexes in the nuclear envelope (NE) promote homolog pairing and synapsis during meiosis. By tethering chromosomes to cytoskeletal motors, these connections lead to processive chromosome movements along the NE. This activity is usually mediated by telomeres, but in the nematode Caenorhabditis elegans, special chromosome regions called “pairing centers” (PCs) have acquired this meiotic function. Here, we identify a previously uncharacterized meiosis-specific NE protein, MJL-1 (MAJIN-Like-1), that is essential for interactions between PCs and LINC complexes in C. elegans. Mutations in MJL-1 eliminate active chromosome movements during meiosis, resulting in nonhomologous synapsis and impaired homolog pairing. Fission yeast and mice also require NE proteins to connect chromosomes to LINC complexes. Extensive similarities in the molecular architecture of meiotic chromosome-NE attachments across eukaryotes suggest a common origin and/or functions of this architecture during meiosis.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS1971

Useful new technology

An information booklet on the Technology Utilization program is presented. Industrial benefits, how to obtain technological data, special publications, Regional Dissemination Centers, multidisciplinary application teams, interagency activities, and patents and licenses are described briefly.

Source record↗

NASA NTRS1980

Boundary-fitted coordinate systems for arbitrary computational regions

The method of Smith and Wiegel was used to generate meshes for mixer lobes and subsonic inlets that are compatible with flow analysis codes requiring a boundary fitted coordinate system. Successful application of this mesh generator required development of procedures to distribute the mesh points along the boundaries, to regulate the dependence of the connecting function to the local boundary slope, to concentrate the mesh into regions of special interest, and to modify the mesh grid so that it possessed a smooth progression of cell metrics and cell volumes in all directions. The method of Smith and Wiegel when coupled with the extensions mentioned above has proven to be easy to use and control for the inlet and mixer lobe geometries investigated.

Kowalski, E. J.↗

NASA NTRS1981

Real-time test of MOCS algorithm during Superflux 1980

A remote sensing experiment was conducted in which success depended upon the real-time use of an algorithm, generated from MOCS (multichannel ocean color sensor) data onboard the NASA P-3 aircraft, to direct the NOAA ship Kelez to oceanic stations where vitally needed sea truth could be collected. Remote data sets collected on two consecutive days of the mission were consistent with the sea truth for low concentrations of chlorophyll a. Two oceanic regions of special interest were located. The algorithm and the collected data are described.

Grew, G. W.↗

NASA NTRS1983

Computation of viscous flows over airfoils, including separation, with a coupling approach

Viscous incompressible flows over single or multiple airfoils, with or without separation, were computed using an inviscid flow calculation, with modified boundary conditions, and by a method providing calculation and coupling for boundary layers and wakes, within conditions of strong viscous interaction. The inviscid flow is calculated with a method of singularities, the numerics of which were improved by using both source and vortex distributions over profiles, associated with regularity conditions for the fictitious flows inside of the airfoils. The viscous calculation estimates the difference between viscous flow and inviscid interacting flow, with a direct or inverse integral method, laminar or turbulent, with or without reverse flow. The numerical method for coupling determines iteratively the boundary conditions for the inviscid flow. For attached viscous layers regions, an underrelaxation is locally calculated to insure stability. For separated or separating regions, a special semi-inverse algorithm is used. Comparisons with experiments are presented.

Leballeur, J. C.↗

NASA NTRS1985

Statistical analysis and use of VAS radiance data

Researchers goals are to describe the information content of Vertical Atmospheric Sounder (VAS) radiance data, especially the 6.7 micrometers water vapor channel, to better interpret the atmosphere's water vapor structure from 6.7 micrometers imagery, and to investigate new analysis and forecasting techniques utilizing retrieved VAS soundings. Researchers made major progress toward these goals during FY-85. They are investigating 6.7 micrometer imagery on 6 to 7 March 1982, a day when special mesoscale ground truth data were collected during the 1982 atmospheric variability experiment/vertical amospheric sounder (AVE/VAS) field experiment. A dark (dry) image streak having mesoscale details was located over the special data region, and it provides the major focus of the case study. Mesoscale radiosonde-derived humidity data are found to verify fine scale features of the image that are not evident from the standard National Weather Service network. Thus, VAS imagery is a reliable detector of mesoscale moisture structure during this case. To investigate causes for the image streak, researchers are calculating water vapor budgets. Subsidence is found to be a factor in the current case as well; however, patterns of descent are not related to the jet streak according to traditional conceptual models. Thus, it appears that more research into jet stream dynamics is needed in order to better interpret 6.7 micrometer imagery.

Fuelberg, H. E.↗

NASA NTRS1988

An access alternative for mobile satellite networks

Conceptually, this paper discusses strategies of digital satellite communication networks for a very large number of low density traffic stations. These stations can be either aeronautical, land mobile, or maritime. The techniques can be applied to international, domestic, regional, and special purpose satellite networks. The applications can be commercial, scientific, military, emergency, navigational or educational. The key strategy is the use of a non-orthogonal access method, which tolerates overlapping signals. With n being either time or frequency partitions, and with a single overlapping signal allowed, a low cost mobile satellite system can be designed with n squared (n squared + n + 1) number of terminals.

Wu, W. W.↗

NASA NTRS1989

The worldwide ionospheric data base

The worldwide ionospheric data base is scattered over the entire globe. Different data sets are held at different institutions in the U.S., U.S.S.R., Australia, Europe, and Asia. The World Data Centers on the different continents archive and distribute part of the huge data base; the scope and cross section of the individual data holdings depend on the regional and special interest of the center. An attempt is made to pull together all the strings that point toward different ionospheric data holdings. Requesters are provided with the information about what is available and where to get it. An attempt is also made to evaluate the reliability and compatibility of the different data sets based on the consensus in the ionospheric research community. The status and accuracy of the standard ionospheric models are also discussed because they may facilitate first order assessment of ionospheric effects. This is a first step toward an ionospheric data directory within the framework of NSSDC's master directory.

Bilitza, Dieter↗

NASA NTRS1990

Flow computations for the Space Shuttle in ascent mode using thin-layer Navier-Stokes equations

The application of CFD techniques to the Space Shuttle ascent environment was aggressively undertaken in the wake of the Challenger accident in order to secure a major new source of aerodynamic information for both the nominal and mission-abort conditions, using Cray 2 and Cray YMP supercomputers. Due to the integrated vehicle's complexity, the 'chimera' composite grid approach, in which an overset body-conforming grid is used to represent each geometric component as well as special flow regions, was employed for the discretization process. Calculation results exhibit general agreement in both flow structure and surface pressure with the available wind tunnel and flight-test results.

Martin, F. W., Jr.↗

NASA NTRS1991

Vertical solidification of dendritic binary alloys

Three numerical techniques are employed to analyze the influence of thermosolutal convection on defect formation in directionally solidified (DS) alloys. The finite-element models are based on the Boussinesq approximation and include the plane-front model and two plane-front models incorporating special dendritic regions. In the second model the dendritic region has a time-independent volume fraction of liquid, and in the last model the dendritic region evolves as local conditions dictate. The finite-element models permit the description of nonlinear thermosolutal convection by treating the dendritic regions as porous media with variable porosities. The models are applied to lead-tin alloys including DS alloys, and severe segregation phenomena such as freckles and channels are found to develop in the DS alloys. The present calculations and the permeability functions selected are shown to predict behavior in the dendritic regions that qualitatively matches that observed experimentally.

Heinrich, J. C.↗

NASA NTRS1992

Solar prediction analysis

Solar Activity prediction is essential to definition of orbital design and operational environments for space flight. This task provides the necessary research to better understand solar predictions being generated by the solar community and to develop improved solar prediction models. The contractor shall provide the necessary manpower and facilities to perform the following tasks: (1) review, evaluate, and assess the time evolution of the solar cycle to provide probable limits of solar cycle behavior near maximum end during the decline of solar cycle 22, and the forecasts being provided by the solar community and the techniques being used to generate these forecasts; and (2) develop and refine prediction techniques for short-term solar behavior flare prediction within solar active regions, with special emphasis on the correlation of magnetic shear with flare occurrence.

Smith, Jesse B.↗

NASA NTRS1995

A theoretical analysis of steady-state photocurrents in simple silicon diodes

A theoretical analysis solves for the steady-state photocurrents produced by a given photo-generation rate function with negligible recombination in simple silicon diodes, consisting of a uniformly doped quasi-neutral region (called 'substrate' below) adjacent to a p-n junction depletion region (DR). Special attention is given to conditions that produce 'funneling' (a term used by the single-eventeffects community) under steady-state conditions. Funneling occurs when carriers are generated so fast that the DR becomes flooded and partially or completely collapses. Some or nearly all of the applied voltage, plus built-in potential normally across the DR, is now across the substrate. This substrate voltage drop affects substrate currents. The steady-state problem can provide some qualitative insights into the more difficult transient problem. First, it was found that funneling can be induced from a distance, i.e., from carriers generated at locations outside of the DR. Secondly, it was found that the substrate can divide into two subregions, with one controlling substrate resistance and the other characterized by ambipolar diffusion. Finally, funneling was found to be more difficult to induce in the p(sup +)/n diode than in the n(sup +)/p diode. The carrier density exceeding the doping density in the substrate and at the DR boundary is not a sufficient condition to collapse a DR.

Edmonds, L.↗

NASA NTRS1999

Data Structure and Parallel Decomposition Considerations on a Fibonacci Grid

The Fibonacci grid, proposed by Swinbank and Purser (see companion abstract), provides attractive properties for global numerical atmospheric prediction by offering an optimally homogeneous, geometrically regular, and approximately isotropic discretization, with only the polar regions requiring special numerical treatment. It is a mathematical idealization, applied to the sphere, of the multi-spiral patterns often found in botanical structures, such as in pine cones and sunflower heads. Computationally, it is natural to organize the domain, into zones, in each of which the same pair, or triple, of "Fibonacci spirals" dominate. But the further subdivision of such zones into "tiles" of a shape and size suitable for distribution to the processors of a massively parallel computer requires very careful consideration if the subsequent spatial computations along the respective spirals, especially those computations (such as compact differencing schemes) that involve recursion, can be implemented in an efficient "load-balanced "manner without requiring excessive amounts of inter-processor communications. In this paper we show how certain "number theoretic" properties of the Fibonacci sequence (whose numbers prescribe the multiplicity of successive spirals) may be exploited in the decomposition of grid zones into tidy arrangements of triangular grid tiles, each tile possessing one side approximately parallel to the constant-latitude zone boundary. We also describe how the spatially recursive processes may be decomposed across such a tiling, and the directionality of the recursions reversed on alternate grid lines, to ensure a very high degree of load balancing throughout the execution of the computations required for one time step of a global model.

Michalakes, John↗