Search NASA⌕ Search

SEARCH · Search NASA

Results for “remote sensors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Support requirements for remote sensor systems on unmanned planetary missions, phase 3

The results of a study to determine the support requirements for remote sensor systems on unmanned planetary flyby and orbiter missions are presented. Sensors and experiment groupings for selected missions are also established. Computer programs were developed to relate measurement requirements to support requirements. Support requirements were determined for sensors capable of performing required measurements at various points along the trajectories of specific selected missions.

Source record↗
NASA NTRS2000

Continuous Water Vapor Profiles from Operational Ground-Based Active and Passive Remote Sensors

The Atmospheric Radiation Measurement program's Southern Great Plains Cloud and Radiation Testbed site central facility near Lamont, Oklahoma, offers unique operational water vapor profiling capabilities, including active and passive remote sensors as well as traditional in situ radiosonde measurements. Remote sensing technologies include an automated Raman lidar and an automated Atmospheric Emitted Radiance Interferometer (AERI), which are able to retrieve water vapor profiles operationally through the lower troposphere throughout the diurnal cycle. Comparisons of these two water vapor remote sensing methods to each other and to radiosondes over an 8-month period are presented and discussed, highlighting the accuracy and limitations of each method. Additionally, the AERI is able to retrieve profiles of temperature while the Raman lidar is able to retrieve aerosol extinction profiles operationally. These data, coupled with hourly wind profiles from a 915-MHz wind profiler, provide complete specification of the state of the atmosphere in noncloudy skies. Several case studies illustrate the utility of these high temporal resolution measurements in the characterization of mesoscale features within a 3-day time period in which passage of a dryline, warm air advection, and cold front occurred.

Turner, D. D.↗
NASA NTRS1978

Inversion of data from diffraction-limited multiwavelength remote sensors. I - Linear case

The remote sensing inverse problem is considered in which the sensor does not necessarily view the same area on the earth at each wavelength, and spatial correlations of the geophysical parameters may be present. Under the conditions of linearity and stationary statistics, the minimum mean-square error solution to the problem of inverting such data is a spatial filter of the Wiener-Kolmogorov class. The resulting remote-sensing system can be characterized by an impulse response matrix in ordinary space or by a transfer matrix in frequency space. A signal-to-noise matrix for the geophysical parameters to be sensed is also defined; this matrix depends on the postulated a priori statistics and on the characteristics of the remote-sensing instrument. The system transfer matrix and the signal-to-noise matrix are simultaneously diagonalizable. The optimum transfer matrix filters out of the estimate vector those eigenparameters for which eigenvalues of the signal-to-noise matrix are less than unity.

Rosenkranz, P. W.↗
NASA NTRSDate not supplied

Principal Component-Based Radiative Transfer Model (PCRTM) for Hyperspectral Remote Sensors for UV, VVIS, NIR, IR, and FIR Spectral Regions

Fast and accurate radiative transfer models are needed to efficiently process satellite hyperspectral remote sensors. We have developed a Principal Component-based radiative transfer model (PCRTM) which can simulate TOA radiance or reflectance spectra in the cloudy atmosphere for far IR, IR, NIR, VIS, and UV spectral regions quickly and accurately. Multi-scattering of multiple layers of clouds/aerosols is included in the model. Polarization components can also be calculated. The computation speed is 3 to 4 orders of magnitude faster than MODTRAN5, LBLRTM, and VLIDORT. The PCRTM calculated radiance spectra agree with reference RTM calculated radiance spectra very well (0.03 K in IR and 0.05% in solar). Comparisons of the PCRTM model calculations with observed AIRS, CrIS, IASI, NAST-I, and SCIAMACHY data will be presented. The solar-PCRTM has been developed for CLARREO PathFinder (CPF) and has been extensively used for CPF science algorithms. The PCRTM can also be used for many current and future NASA future missions such as EMIT, SBG, TEMPO, and PACE.

pcrtm↗
NASA NTRS1981

Interpolating for the location of remote sensor data

An interpolation algorithm is presented as a practical alternative to common interpolation and approximation methods when applied to the problem of determining the location of remote sensor data. This algorithm is based upon knowledge of the geometry of the problem and is shown to be inherently more accurate than common interpolation schemes which may be applied to all types of data. A practical location problem is used to demonstrate its accuracy and computational cost.

Puccinelli, E. F.↗
NASA NTRS2011

Multi-Sensor Remote Sensing of Forest Dynamics in Central Siberia

The forested regions of Siberia, Russia are vast and contain about a quarter of the world's forests that have not experienced harvesting. However, many Siberian forests are facing twin pressures of rapidly changing climate and increasing timber harvest activity. Monitoring the dynamics and mapping the structural parameters of the forest is important for understanding the causes and consequences of changes observed in these areas. Because of the inaccessibility and large extent of this forest, remote sensing data can play an important role for observing forest state and change. In Central Siberia, multi-sensor remote sensing data have been used to monitor forest disturbances and to map above-ground biomass from the Sayan Mountains in the south to the taiga-tundra boundaries in the north. Radar images from the Shuttle Imaging Radar-C (SIR-C)/XSAR mission were used for forest biomass estimation in the Sayan Mountains. Radar images from the Japanese Earth Resources Satellite-1 (JERS-1), European Remote Sensing Satellite-1 (ERS-1) and Canada's RADARSAT-1, and data from ETM+ on-board Landsat-7 were used to characterize forest disturbances from logging, fire, and insect damage in Boguchany and Priangare areas.

Ransom, K. J.↗
DOE OSTI2022

Model Evaluation by Measurements from Collocated Remote Sensors in Complex Terrain

Model improvement efforts involve an evaluation of changes in model skill in response to changes in model physics and parameterization. When using wind measurements from various remote sensors to determine model forecast accuracy, it is important to understand the effects of measurement-uncertainty differences among the sensors resulting from differences in the methods of measurement, the vertical and temporal resolution of the measurements, and the spatial variability of these differences. Here we quantify instrument measurement variability in 80-m wind speed during WFIP2 and its impact on the calculated errors and the change in error from one model version to another. Here the model versions tested involved updates in model physics from HRRRv1 to HRRRv4, and reductions in grid interval from 3 km to 750 m. Model errors were found to be 2–3 m s –1 . Differences in errors as determined by various instruments at each site amounted to about 10% of this value, or 0.2–0.3 m s –1 . Changes in model skill due to physics or grid-resolution updates also differed depending on the instrument used to determine the errors; most of the instrument-to-instrument differences were ~0.1 m s –1 , but some reached 0.3 m s –1 . All instruments at a given site mostly showed consistency in the sign of the change in error. In two examples, though, the sign changed, illustrating a consequence of differences in measurements: errors determined using one instrument may show improvement in model skill, whereas errors determined using another instrument may indicate degradation. This possibility underscores the importance of having accurate measurements to determine the model error.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1970

Interactive display/graphics systems for remote sensor data analysis

A color-television display system and interactive graphics equipment on-line to an IBM 360/44 computer are used to develop a variety of interactive displays which aid in analyzing remote sensor data. These interactive displays are used to: (1) analyze data from a multispectral scanner; (2) develop automatic pattern recognition systems based on multispectral scanner measurements; and (3) analyze data from non-imaging sensors such as the infrared radiometer and microwave scatterometer.

Eppler, W. G.↗
NASA NTRS1988

Optimal feedback control of a bioreactor with a remote sensor

Sensors used to monitor bioreactor conditions directly often perform poorly in the face of adverse nonphysiological conditions. One way to circumvent this is to use a remote sensor block. However, such a configuration usually causes a significant time lag between measurements and the actual state values. Here, the problem of implementing feedback control strategies for such systems, described by nonlinear equations, is addressed. The problem is posed as an optimal control problem with a linear quadratic performance index. The linear control law so obtained is used to implement feedback. A global linearization technique as well as an expansion using Taylor series is used to linearize the nonlinear system, and the feedback is subsequently implemented.

Niranjan, S. C.↗
NASA NTRS1971

Interactive display/graphics systems for remote sensor data analysis.

Using a color-television display system and interactive graphics equipment on-line to an IBM 360/44 computer, investigators at the Manned Spacecraft Center have developed a variety of interactive displays which aid in analyzing remote sensor data. This paper describes how such interactive displays are used to: (1) analyze data from a multispectral scanner, (2) develop automatic pattern recognition systems based on multispectral scanner measurements, and (3) analyze data from nonimaging sensors such as the infrared radiometer and microwave scatterometer.

Eppler, W. G.↗
DOE OSTI2021

Ground-based temperature and humidity profiling: combining active and passive remote sensors

Abstract. Thermodynamic profiles in the planetary boundary layer (PBL) are important observations for a range of atmospheric research and operational needs. These profiles can be retrieved from passively sensed spectral infrared (IR) or microwave (MW) radiance observations or can be more directly measured by active remote sensors such as water vapor differential absorption lidars (DIALs). This paper explores the synergy of combining ground-based IR, MW, and DIAL observations using an optimal-estimation retrieval framework, quantifying the reduction in the uncertainty in the retrieved profiles and the increase in information content as additional observations are added to IR-only and MW-only retrievals. This study uses ground-based observations collected during the Perdigão field campaign in central Portugal in 2017 and during the DIAL demonstration campaign at the Atmospheric Radiation Measurement Southern Great Plains site in 2017. The results show that the information content in both temperature and water vapor is higher for the IR instrument relative to the MW instrument (thereby resulting in smaller uncertainties) and that the combined IR + MW retrieval is very similar to the IR-only retrieval below 1.5 km. However, including the partial profile of water vapor observed by the DIAL increases the information content in the combined IR + DIAL and MW + DIAL water vapor retrievals substantially, with the exact impact vertically depending on the characteristics of the DIAL instrument itself. Furthermore, there is a slight increase in the information content in the retrieved temperature profile using the IR + DIAL relative to the IR-only; this was not observed in the MW + DIAL retrieval.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1976

Evaluation of satellites and remote sensors for atmospheric pollution measurements

An approach to the development of a prioritized list of scientific goals in atmospheric research is provided. The results of the analysis are used to estimate the contribution of various spacecraft/remote sensor combinations for each of several important constituents of the stratosphere. The evaluation of the combinations includes both single-instrument and multiple-instrument payloads. Attention was turned to the physical and chemical features of the atmosphere as well as the performance capability of a number of atmospheric remote sensors. In addition, various orbit considerations were reviewed along with detailed information on stratospheric aerosols and the impact of spacecraft environment on the operation of the sensors.

Carmichael, J.↗
NASA NTRS1975

Application of remote sensors in coastal zone observations

A review of processes taking place along coastlines and their biological consideration led to the determination of the elements which are required in the study of coastal structures and which are needed for better utilization of the resources from the oceans. The processes considered include waves, currents, and their influence on the erosion of coastal structures. Biological considerations include coastal fisheries, estuaries, and tidal marshes. Various remote sensors were analyzed for the information which they can provide and sites were proposed where a general ocean-observation plan could be tested.

Caillat, J. M.↗
NASA NTRS1976

The evolution of the clear air convective layer revealed by surface-based remote sensors

Results are reported for simultaneous observations of the growth and decay of the clear-air convective mixing layer near a coastline, which were made with an FM-CW radar, a high-power narrow-beam S-band radar, and an acoustic echo sounder. The main purpose of this study was to determine the relationship between the rise rate of the convective depth and the lapse rate of temperature, particularly in the morning hours. The results indicate that the three remote sensors can provide excellent mutually supporting data on the convective depth. It is found that this depth is well behaved during the day and that its rise rate varies roughly linearly with the inverse square root of the temperature lapse rate during the morning. The data suggest that some models concerning the rise rate require modification, since these models imply that the surface heat flux would have to be unreasonably large to produce the observed relationship.

Noonkester, V. R.↗
NASA NTRSDate not supplied

Deriving Essential Climate Variable Data from Multiple Satellite Remote Sensors Using a Consistent Fingerprinting Method

Hyperspectral observations from satellite-based sensors provide high information content for the Earth’s atmospheric and surface properties. Traditionally, long-term climate products are derived by performing spatial and temporal averaging of level-2 satellite products. It is a time-consuming process to generate level-2 data products since modern hyperspectral satellite sensors have millions of observations each day with thousands of spectral channels for each observation. Additionally, differences in level-2 retrieval algorithms can lead to errors in the climate products when fusing data from different satellite sensors. We have developed a radiometrically consistent spectral fingerprinting method, which overcomes the above-mentioned shortcomings, to derive climate change signals from multiple satellite sensors using spatiotemporally averaged level-1 data. We have applied this method to Atmospheric Infrared Sounder (AIRS) and Cross-track Infrared Sounder (CrIS) data and generated decade-long climate data records for atmospheric temperature, water vapor, cloud, trace gases, and surface skin temperature. A key component to this work is a set of observational-based radiative kernels produced from CrIS level-1 data using a single field of view (SFOV) optimal estimation retrieval algorithm. Only limited CrIS level-1 data (e.g., 1-2 years of data) are needed to the derive radiative kernels. Our Principal Component-based Radiative Model (PCRTM) enables us to perform SFOV retrievals under all sky conditions and provides radiative kernels (including those for clouds) needed by the spectral fingerprinting method. In this presentation, we will describe the basic methodology, the details of the algorithm, and results from NASA Aqua AIRS and Suomi-NPP CrIS data. The method can be applied to study future hyperspectral remote sensors such as CLARREO (Climate Absolute Radiance and Refractivity Observatory) Pathfinder (CPF), Tropospheric Emissions: Monitoring of Pollution (TEMPO), Surface Biology and Geology (SBG), Aerosol and Cloud, Convection and Precipitation (ACCP).

Xu Liu↗
NASA NTRSDate not supplied

Generating Essential Climate Variables from Multiple Satellite Hyperspectral Remote Sensors

Hyperspectral observations from satellite-based sensors provide high information content for the Earth’s atmospheric and surface properties. Traditionally, long-term climate products are derived by performing spatial and temporal averaging of level-2 satellite products. There are two shortcomings of this approach. First, it is a time-consuming process to generate level-2 data products since modern hyperspectral satellite sensors have millions of observations each day with thousands of spectral channels for each observation. Secondly, differences in level-2 retrieval algorithms can lead to errors in the fused multi-satellite data. We have developed a radiometrically consistent spectral fingerprinting method, which overcomes the above-mentioned shortcomings, to derive climate change signals from multiple satellite sensors using spatiotemporally averaged level-1 data. We have applied this method to data collected from Atmospheric Infrared Sounder (AIRS) on Aqua satellite and Cross-track Infrared Sounder (CrIS) on SNPP and NOAA20 and generated decade-long climate data records for atmospheric temperature, water vapor, cloud, trace gases, and surface skin temperature. A key component to this work is a set of observational-based radiative kernels produced from CrIS level-1 data using a single field of view (SFOV) optimal estimation retrieval algorithm. Only limited CrIS level-1 data (e.g., 1-2 years of data) are needed to the derive radiative kernels. Our Principal Component-based Radiative Model (PCRTM) enables us to perform SFOV retrievals under all sky conditions and provides radiative kernels (including those for clouds) needed by the spectral fingerprinting method. In this presentation, we will describe the basic methodology, the details of the algorithm, and results from NASA Aqua AIRS and Suomi-NPP CrIS data. The method can be applied to study future hyperspectral remote sensors such as CLARREO (Climate Absolute Radiance and Refractivity Observatory) Pathfinder (CPF), Tropospheric Emissions: Monitoring of Pollution (TEMPO), Surface Biology and Geology (SBG), Atmosphere Observing System (AOS).

Xu Liu↗
NASA NTRS1973

Basic forest cover mapping using digitized remote sensor data and automated data processing techniques

Remote sensing equipment and automatic data processing techniques were employed as aids in the institution of improved forest resource management methods. On the basis of automatically calculated statistics derived from manually selected training samples, the feature selection processor of LARSYS selected, upon consideration of various groups of the four available spectral regions, a series of channel combinations whose automatic classification performances (for six cover types, including both deciduous and coniferous forest) were tested, analyzed, and further compared with automatic classification results obtained from digitized color infrared photography.

Coggeshall, M. E.↗
NASA NTRS1994

BIOME: An Ecosystem Remote Sensor Based on Imaging Interferometry

Until recent times, optical remote sensing of ecosystem properties from space has been limited to broad band multispectral scanners such as Landsat and AVHRR. While these sensor data can be used to derive important information about ecosystem parameters, they are very limited for measuring key biogeochemical cycling parameters such as the chemical content of plant canopies. Such parameters, for example the lignin and nitrogen contents, are potentially amenable to measurements by very high spectral resolution instruments using a spectroscopic approach. Airborne sensors based on grating imaging spectrometers gave the first promise of such potential but the recent decision not to deploy the space version has left the community without many alternatives. In the past few years, advancements in high performance deep well digital sensor arrays coupled with a patented design for a two-beam interferometer has produced an entirely new design for acquiring imaging spectroscopic data at the signal to noise levels necessary for quantitatively estimating chemical composition (1000:1 at 2 microns). This design has been assembled as a laboratory instrument and the principles demonstrated for acquiring remote scenes. An airborne instrument is in production and spaceborne sensors being proposed. The instrument is extremely promising because of its low cost, lower power requirements, very low weight, simplicity (no moving parts), and high performance. For these reasons, we have called it the first instrument optimized for ecosystem studies as part of a Biological Imaging and Observation Mission to Earth (BIOME).

Peterson, David L.↗