Search NASA⌕ Search

SEARCH · Search NASA

Results for “renewable biofuel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

pH adjustment increases biofuel production from inhibitory switchgrass hydrolysates

Biofuels derived from renewable and sustainable lignocellulosic biomass, such as switchgrass, offer a promising means to limit greenhouse gas emissions. However, switchgrass grown under drought conditions contains high levels of chemical compounds that inhibit microbial conversion to biofuels. Fermentation of drought switchgrass hydrolysates by engineered Saccharomyces cerevisiae and Zymomonas mobilis results in lower ethanol production than does fermentation of hydrolyzed switchgrass from a typical rainfall year. Here, it is demonstrated that this inhibitory effect can be alleviated by altering the pH of drought switchgrass hydrolysates produced by two different pretreatment methods: Ammonia Fiber Expansion (AFEX) and Soaking in Aqueous Ammonia (SAA). Fermentation rates and biofuel production by Saccharomyces cerevisiae and Zymomonas mobilis were higher at pH 5.8 than at pH 5.0 from all feedstock years and following both pretreatment methods. SAA pretreatment of drought switchgrass furthermore enabled increased fermentation rates and biofuel titers compared to AFEX pretreatment. A synthetic mimic of switchgrass hydrolysate was developed and identified relief from pH-dependent inhibition by lignocellulose-derived inhibitors as the cause of increased biofuel production above a pH of 5.0. These results demonstrate that SAA pretreatment and pH adjustment can significantly improve fermentation and biofuel production from inhibitory feedstocks by industrial microorganisms.

09 BIOMASS FUELS↗
DOE OSTI2021

Adoption of Biofuels for the Marine Shipping Industry: A Long-Term Price and Scalability Assessment

One of the biggest challenges in the 21st Century is transforming the transportation sector into a low carbon-based sustainable industry, including maritime shipping. Bioenergy has an essential role in the transition to move maritime shipping toward carbon neutrality. Biomass-derived fuels can undoubtedly play a crucial role in the future of marine propulsion that as renewable alternatives can offer potential synergistic benefits when blended with petroleum fuels. With inherently zero- or low-sulfur and renewable carbon sources, biofuels will help mitigate marine shipping sulfur emissions, improve overall emission profiles, and enable the decarbonization transition. As biofuel for marine propulsion is still at its nascent stage, knowledge gaps exist, including the life cycle environmental impacts, compatibility of biofuel blending with conventional marine fuels, scalability, and cost. This study assessed the biofuel availability and cost aspects for marine use and was supported by the U.S. Department of Transportation’s Maritime Administration (MARAD) Office of Environment to project the long-term price and annual biofuel production capacity potential for marine propulsion in the United States. The study will shed light on the prospect of biofuel adoption for the maritime shipping industry.

09 BIOMASS FUELS↗
NASA NTRS2009

Chemical Processing of Non-Crop Plants for Jet Fuel Blends Production

The use of Biofuels has been gaining in popularity over the past few years due to their ability to reduce the dependence on fossil fuels. Biofuels as a renewable energy source can be a viable option for sustaining long-term energy needs if they are managed efficiently. We describe our initial efforts to exploit algae, halophytes and other non-crop plants to produce synthetics for fuel blends that can potentially be used as fuels for aviation and non-aerospace applications. Our efforts have been dedicated to crafting efficient extraction and refining processes in order to extract constituents from the plant materials with the ultimate goal of determining the feasibility of producing biomass-based jet fuel from the refined extract. Two extraction methods have been developed based on communition processes, and liquid-solid extraction techniques. Refining procedures such as chlorophyll removal and transesterification of triglycerides have been performed. Gas chromatography in tandem with mass spectroscopy is currently being utilized in order to qualitatively determine the individual components of the refined extract. We also briefly discuss and compare alternative methods to extract fuel-blending agents from alternative biofuels sources.

Kulis, M. J.↗
DOE OSTI2022

Life Cycle Assessment of Bioethanol Production: A Case Study from Poplar Biomass Growth in the U.S. Pacific Northwest

Biomass appears to be one of the most prominent renewable resources for biofuels such as bioethanol, mainly due to its better environmental performance compared with fossil fuels. This study addresses a comprehensive environmental performance of bioethanol production, employing empirical data from hybrid poplar grown in the U.S. The study considers 1 MJ as a functional unit and employs a cradle-to-grave approach, which entails the feedstock and harvesting production of poplar, transport to a biorefinery, bioconversion of the biomass process, and fuel use. On average, bioconversion is the main contributor to environmental degradation in all the categories evaluated (77%). The second main contributor is either the feedstock and harvesting production of poplar (17%) or fuel use (6%), depending on the environmental category. Thus, focusing on only one category may induce a misinterpretation of the environmental performance of bioethanol production. Finally, environmental credits in the global warming potential (GWP) category were obtained from the carbon sequestered in the biomass during the growing period and from avoided fossil fuel emissions due to electricity production from a renewable source. This means that the net GWP of the life cycle of bioethanol from poplar biomass is slightly negative (–1.05 × 10 –3 kg CO 2 -eq·MJ –1 ).

09 BIOMASS FUELS↗
DOE OSTI2024

Insight into the autoproteolysis mechanism of the RsgI9 anti‐σ factor from Clostridium thermocellum

Abstract Clostridium thermocellum is a potential microbial platform to convert abundant plant biomass to biofuels and other renewable chemicals. It efficiently degrades lignocellulosic biomass using a surface displayed cellulosome, a megadalton sized multienzyme containing complex. The enzymatic composition and architecture of the cellulosome is controlled by several transmembrane biomass‐sensing RsgI‐type anti‐σ factors. Recent studies suggest that these factors transduce signals from the cell surface via a conserved RsgI extracellular (CRE) domain (also called a periplasmic domain) that undergoes autoproteolysis through an incompletely understood mechanism. Here we report the structure of the autoproteolyzed CRE domain from the C. thermocellum RsgI9 anti‐σ factor, revealing that the cleaved fragments forming this domain associate to form a stable α/β/α sandwich fold. Based on AlphaFold2 modeling, molecular dynamics simulations, and tandem mass spectrometry, we propose that a conserved Asn‐Pro bond in RsgI9 autoproteolyzes via a succinimide intermediate whose formation is promoted by a conserved hydrogen bond network holding the scissile peptide bond in a strained conformation. As other RsgI anti‐σ factors share sequence homology to RsgI9, they likely autoproteolyze through a similar mechanism.

Takayesu, Allen↗
DOE OSTI2023

Chemical-free production of multiple high-value bioproducts from metabolically engineered transgenic sugarcane ‘oilcane’ bagasse and their recovery using nanofiltration

Bioenergy crops have potential for being a sustainable and renewable feedstock for biofuels and various value- added bioproducts. The study utilizes recently developed transgenic sugarcane (‘oilcane’) bagasse for chemical- free coproduction of high-value bioproducts, i.e., furfurals, HMF, acetic acid, cellulosic sugars, and vegetative lipids. Hydrothermal pretreatment was optimized at 210°C for 5 min to coproduce 6.91%, 2.67%, 5.07%, 2.42% and 37.82% (w/w) furfurals, HMF, acetic acid, vegetative lipids, and cellulosic sugars, respectively from lignocellulosic biomass. Additionally, nanofiltration system in-series was successfully established to recover sugars, furfurals, HMF, and acetic acid from the pretreatment liquor. 1st nanofiltration with Duracid NF mem- brane rejected ~99% sugars. Concentrated sugars with significantly reduced inhibitory products were obtained in retentate for fermentation. 2nd nanofiltration with NF90 membrane used permeate of 1st nanofiltration as feed and rejected ~ 86% furfurals. Furthermore, the work demonstrates the feasibility of coproducing and recovering multiple biochemicals from lignocellulosic biomass.

09 BIOMASS FUELS↗
DOE OSTI2025

Structure-guided utilization of lignocellulose for catalysis, energy, and biomaterials

As a complex composite of cellulose, hemicellulose, and lignin, plant lignocellulose has long served as a major resource for biomass conversion, materials engineering, and bio-based product development. High-resolution structural insights enabled by solid-state nuclear magnetic resonance (ssNMR) now allow the mapping of polymer interfaces, identification of functional group accessibility, and tracking of molecular organization during processing, all of which are critical factors for optimizing catalytic strategies. These insights could drive transformative progress in lignocellulose-based applications, including selective depolymerization, improved pretreatment design, and efficient upcycling of lignin into resins, plastics, and biomedical materials. In industry-relevant contexts, such as biofuel generation and renewable material manufacturing, understanding the hydration dynamics, cross-linking patterns, and structural heterogeneity is also essential. The ability to visualize these features in native biomass presents a unique opportunity to develop new strategies for sustainability and performance. As the structural toolbox continues to expand, it is becoming a central enabler for innovations in renewable energy, green chemistry, and advanced bioproducts.

bioproduct↗
DOE OSTI2023

Growth-uncoupled propanediol production in a Thermoanaerobacterium thermosaccharolyticum strain engineered for high ethanol yield

Abstract Cocultures of engineered thermophilic bacteria can ferment lignocellulose without costly pretreatment or added enzymes, an ability that can be exploited for low cost biofuel production from renewable feedstocks. The hemicellulose-fermenting species Thermoanaerobacterium thermosaccharolyticum was engineered for high ethanol yield, but we found that the strains switched from growth-coupled production of ethanol to growth uncoupled production of acetate and 1,2-propanediol upon growth cessation, producing up to 6.7 g/L 1,2-propanediol from 60 g/L cellobiose. The unique capability of this species to make 1,2-propanediol from sugars was described decades ago, but the genes responsible were not identified. Here we deleted genes encoding methylglyoxal reductase, methylglyoxal synthase and glycerol dehydrogenase. Deletion of the latter two genes eliminated propanediol production. To understand how carbon flux is redirected in this species, we hypothesized that high ATP levels during growth cessation downregulate the activity of alcohol and aldehyde dehydrogenase activities. Measurements with cell free extracts show approximately twofold and tenfold inhibition of these activities by 10 mM ATP, supporting the hypothesized mechanism of metabolic redirection. This result may have implications for efforts to direct and maximize flux through alcohol dehydrogenase in other species.

09 BIOMASS FUELS↗
DOE OSTI2021

Strikingly high amount of tricin-lignin observed from vanilla (Vanilla planifolia) aerial roots

Lignin has attracted tremendous interest as a renewable resource for biofuels, biomaterials, and chemicals especially in the era of bio-based refineries. The structural studies of lignin play an essential role in both understanding the nature and biosynthesis of these polymers and optimizing their valorization values. In this study, we have investigated the structures of lignin from different tissues—aerial roots, nodes, internodes, and seeds, from vanilla (Vanilla planifolia) by using gel permeation chromatography (GPC), heteronuclear single-quantum coherence (HSQC) nuclear magnetic resonance (NMR), and 31P NMR. An unusual tricin-lignin was observed in the aerial roots of vanilla with an strikingly high level of tricin unit, whereas the lignin from the nodes and internodes displayed traditional S/G type lignin with only 4–10% tricin abundance. The aerial roots lignin is primarily composed of β-O-4' alkyl-aryl ether substructures (96% of linkages) in comparison to 65 and 73% in the nodes and internodes lignin, respectively. Additionally, thioacidolysis quantification results showed that lignin from aerial roots has 29.1 mg g -1 tricin, about 3- to 5-fold higher than the lignins isolated from nodes (10.1 mg g -1 ) and internodes (6.9 mg g -1 ). This communication of a particularly high level of tricin-lignin in vanilla plant has important impacts including: (1) the presence of the high amount of tricin as part of lignin from aerial roots could play a vital role for the valorization of lignin, even tricin itself, as a feedstock for value-added chemicals and commodities; and (2) it could open new ways to scientists to design and engineer the structure of tricin-lignin, or lignin in general, to confer plants with new or improved properties due to the plasticity of lignification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Toward sustainable production of value‐added bioenergy and industrial oils in oilseed and biomass feedstocks

Abstract Plant fatty acids are used for food, feed, fuel, and industrial materials. Structurally and chemically diverse fatty acids, referred to as unusual or specialized fatty acids, are found in the seed oils of diverse plant species. Many unusual fatty acids have potential use as alternative and renewable sources of biofuels and bio‐based industrial feedstocks due to their variant structures' physical or functional properties. Oils enriched in these fatty acids can increase the value of oilseed crops and provide co‐products that can be readily extracted from lignocellulosic materials in biomass crops. Here, we describe recent progress in strategies for enhancement of oil production and quality in oilseed crops and the extension of this knowledge for metabolic engineering of biomass crops. Successful implementation of these strategies, in part, through the use of emerging synthetic biology tools, will provide added product value for the economic sustainability of biomass crops as bioenergy feedstocks.

Park, Kiyoul↗
DOE OSTI2023

Systematic Analysis of Metabolic Bottlenecks in the Methylerythritol 4-Phosphate (MEP) Pathway of Zymomonas mobilis

Engineered microorganisms have the potential to convert renewable substrates into biofuels and valuable bioproducts, which offers an environmentally sustainable alternative to fossil-fuel-derived products. Isoprenoids are a diverse class of biologically derived compounds that have commercial applications as various commodity chemicals, including biofuels and biofuel precursor molecules.

isoprene↗
DOE OSTI2023

Data for Chemical-Free Production of Multiple High-Value Bioproducts from Metabolically Engineered Transgenic Sugarcane ‘Oilcane’ Bagasse and Their Recovery Using Nanofiltration

Bioenergy crops have potential for being a sustainable and renewable feedstock for biofuels and various value-added bioproducts. The study utilizes recently developed transgenic sugarcane (“oilcane”) bagasse for chemical-free coproduction of high-value bioproducts, i.e., furfurals, HMF, acetic acid, cellulosic sugars, and vegetative lipids. Hydrothermal pretreatment was optimized at 210 °C for 5 min to coproduce 6.91%, 2.67%, 5.07%, 2.42% and 37.82% (w/w) furfurals, HMF, acetic acid, vegetative lipids, and cellulosic sugars, respectively from lignocellulosic biomass. Additionally, nanofiltration system in-series was successfully established to recover sugars, furfurals, HMF, and acetic acid from the pretreatment liquor. 1st nanofiltration with Duracid NF membrane rejected ∼99% sugars. Concentrated sugars with significantly reduced inhibitory products were obtained in retentate for fermentation. 2nd nanofiltration with NF90 membrane used permeate of 1st nanofiltration as feed and rejected ∼ 86% furfurals. The work demonstrates the feasibility of coproducing and recovering multiple biochemicals from lignocellulosic biomass.

Biomass Analytics↗
DOE OSTI2025

Efficiency and emissions of NH3-diesel/bio-pilot dual-fuel combustion in a high-speed four-stroke engine

While dual-fuel ammonia engines are starting to be commercialized for the large low-speed 2-stroke marine engine market, there are still challenges with utilizing ammonia on 4-stroke engines used as auxiliary engines for ocean going vessels and within inland and coastal marine applications. The shorter timescales for high-speed engines pose a particular challenge for low-cetane, high ignition energy fuels like ammonia. In addition to achieving maximum ammonia substitution levels, N2O emissions are a key factor that needs to be understood. This paper reports the results of experiments using a single-cylinder 107mm bore Cummins B-series diesel engine modified for port-fuel injection of gaseous anhydrous ammonia with a direct injection of diesel fuel near-TDC to ignite the premixed ammonia. Combustion data as well as emissions data from an FTIR including NO, NO2, N2O, and unburned ammonia are presented for selected operating points with a focus on high-load operation at 1200rpm with high ammonia energy substitution (over 95% by fuel energy). Several air/fuel ratio conditions are included, sweeping from diesel-like airflow to stoichiometric conditions. The impact of biofuels (biodiesel and renewable diesel) as pilot fuels is also considered. Comparisons for emissions, greenhouse gas performance, and efficiency are made with a conventional diesel combustion baseline. The impact of fuel injection strategy on NOx, N2O, and NH3 emissions is quantified, and the dual-fuel ammonia results on this high-speed 4-stroke engine are expected to provide fundamental insights into further combustion development opportunities for the larger engines used across marine applications.

Kaul, Brian [ORNL] (ORCID:0000000184813620)↗
DOE OSTI2025

Near-infrared spectroscopy as a green analytical tool for sustainable biomass characterization for biofuels and bioproducts: An overview

Biomass, a widely used renewable energy source, requires characterization to optimize biofuel and bioproduct processes, customize feedstocks, and ensure economic and environmental sustainability. Conventional wet-chemistry methods for biomass analysis are slow, expensive, and require significant reagents and skilled personnel. In contrast, near-infrared (NIR) spectroscopy, a faster, cost-effective, and reagent-free green technology, enables non-destructive biomass analysis with minimal sample preparation. This study provides an overview of the fundamentals of NIR spectroscopy and explores its recent applications for analyzing various biomass properties important to the biofuel and bioproduct industry. The study also critically evaluates the challenges and opportunities of using NIR spectroscopy for biomass analysis. This review aims to guide future research for rapid and high throughput characterization of biomass in the biomass industry, supporting the United Nations’ sustainable development goal (SDG) 7: producing affordable and sustainable energy.

Biofuels↗
DOE OSTI2025

An overview of switchgrass phenotypes variability across diverse populations and their implications for conversion to fuels

There have been substantial changes to the human lifestyle over the past two centuries, which are reflected in the amount of fuel we consume to power our day-to-day needs. The way we use these resources has indeed manifested in an overdependence on non-renewable energy sources, such as coal and petroleum, for generating electricity and powering our transportation needs. There is a pressing need to explore alternative ways of fueling our current lifestyle without impacting the environment. Biofuels have long been touted as a sustainable solution for use as drop-in fuels in aviation and maritime applications. Still, they have yet to establish themselves as a competitive commercial alternative, necessitating further research and development. Lignocellulosic biomass is an underutilized resource that is widely accessible for the commercial processing of renewable biofuels. Bioenergy crops, such as switchgrass (Panicum virgatum L.), which can be cultivated on marginal lands with minimal competition for agricultural land, are an ideal and promising candidate for bulk-scale biofuel synthesis. Over the past 30 years, significant progress has been made in breeding and genetically modifying these grasses to enhance their drought resilience and subsequent yields. However, discrepancies in biomass composition can lead to irregular feedstocks for downstream operations, which in turn affect overall production targets for biofuels. Here, this review examines the variability in switchgrass (P. virgatum L.) biomass phenotypes across diverse populations and plant components, and their implications for biofuel conversion. The study highlights significant variations in biomass yield, composition, and cell wall chemistry both between switchgrass genotypes and within individual cultivars. Key findings include differences in cellulose, hemicellulose, and lignin content between leaves and stems, which affect biomass digestibility and ethanol yield. The review also discusses the impact of lignin chemistry, particularly the syringyl/guaicyl (S/G) ratio, on the efficiency of biomass saccharification. Furthermore, it explores how these variations respond differently to various pretreatment techniques, affecting overall biofuel production. We conclude that understanding and quantifying this variability is crucial for optimizing switchgrass as a feedstock for commercial biofuel production, thereby potentially addressing the pressing need for sustainable energy sources in sectors such as aviation.

Kousika, Rohit [Univ. of Tennessee, Knoxville, TN ↗
DOE OSTI2025

Adaptive Computing for Scale-Up Problems

Adaptive Computing is an application-agnostic outer loop framework to strategically deploy simulations and experiments to guide decision making for scale-up analysis. Resources are allocated over successive batches, which makes the allocation adaptive to some objective such as optimization or model training. The framework enables the characterization and management of uncertainties associated with predictive models of complex systems when scale-up questions lead to significant model extrapolation. A key advancement of this framework is its integration of multi-fidelity surrogate modeling, uncertainty management, and automated orchestration of various computing and experimentation resources into a single integrated software package. This enables efficient multi-fidelity modeling across multiple computing resources by incorporating real-world constraints such as relative queue times and throughput on individual machines into the multi-fidelity sampling decision. We discuss applications of this framework to problems in the renewable energy space, including biofuels production, material synthesis, perovskite crystal growth, and building electrical loads.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

The Future of Fuels: Meeting Global Decarbonization Goals

Petroleum has served as the source of the vast majority of our transportation fuel for well over a century. During the past few decades, biofuels—primarily ethanol, biodiesel, renewable diesel/jet, and renewable natural gas—have steadily increased in volume though still represent a small portion of the total fuel mix. While initially driven by energy security considerations, recent policies promoting increased biofuel use have been motivated by greenhouse gas reductions. Within the past couple years, significant interest has emerged in “e-fuels”—fuels produced from a carbon source (e.g., CO2) and electricity. If sourced from renewable electrons, e-fuels have the potential to provide significant GHG reductions, though questions of scale and economics remain. This talk will discuss recent research into advanced fuels properties and production routs, as well as issues and challenges that fuels must overcome to power ICEs in the mid 21st century.

47 OTHER INSTRUMENTATION↗