Search NASA⌕ Search

SEARCH · Search NASA

Results for “repeater”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1961

Repeatability of the Over-All Errors of an Airplane Altimeter Installation in Landing-Approach Operations

Flight tests have been conducted to determine the repeatability of the over-all altimetry errors in the landing-approach condition of two sensitive altimeters (Air Force type C-12) installed in the cockpit of a transport airplane and of four precision altimeters (Air Force type MA-1) installed in a photo-observer. Data were obtained through a speed range of 62 to 100 knots during 42 landing-approach operations conducted on four different days. The results of the tests show that the repeatability errors of the two sensitive altimeters are +/- 35 feet and +/- 39 feet. These errors are of the same order as the maximum repeatability error measured in previous tests of eleven airplanes of the same type. For each of the four flights of the present tests the mean values of the data obtained with the two sensitive altimeters shifted by relatively large amounts, apparently because of the interaction of the stability and aftereffect- recovery characteristics of the instruments. For concurrent measurements of the over-all errors of the four precision altimeters, it is concluded that for comparable installations, the repeatability errors measured with these altimeters would be smaller than those measured with the sensitive altimeters.

Gracey, William↗
NASA NTRS2001

Repeat-Orbit Interferometric Precision Measurement of Mercury Obliquity

Repeat-orbit or time-delayed interferometry has been widely used for SAR (Synthetic Aperture Radar)-based observations of such terrestrial phenomena as flow of glaciers and post-seismic displacements from radar on Earth-orbiting satellites and spacecraft. Repeat-orbit interferometry has also obtained fringes while investigating the measurement of topography of the Moon from Arecibo radar observations. Because of the unique spin-orbit resonance of Mercury, the locus of the sub-radar point on Mercury crosses over itself many times per year. Moreover, the locus of the sub-radar track repeats these crossings from year to year over many years. Given the proper geometry, these subradar point crossings offer the opportunity for interplanetary repeat-orbit interferometry via Earth-based radar observations. The ephemerides of Mercury and Earth, and the orientation of the Earth, are all known to sufficiently high-precision with respect to 'inertial space' to enable this kind of interferometry. This capability would merely be a curiosity, since Earth-based radar lacks the signal-to-noise to measure planetary-scale topography, except that the technique can be used to measure Mercury's obliquity (and possibly the forced libration in longitude). Combining very accurate measurements of the obliquity and the forced libration in longitude with Mercury-orbiter-based measurements of the low-order and degree Mercury gravity field can place constraints on the size and state of Mercury's fluid core. Additional information is contained in the original extended abstract.

Slade, M. A.↗
NASA NTRS2004

Status of a UAV SAR Designed for Repeat Pass Interferometry for Deformation Measurements

Under the NASA ESTO sponsored Instrument Incubator Program we have designed a lightweight, reconfigurable polarimetric L-band SAR designed for repeat pass deformation measurements of rapidly deforming surfaces of geophysical interest such as volcanoes or earthquakes. This radar will be installed on an unmanned airborne vehicle (UAV) or a lightweight, high-altitude, and long endurance platform such as the Proteus. After a study of suitable available platforms we selected the Proteus for initial development and testing of the system. We want to control the repeat track capability of the aircraft to be within a 10 m tube to support the repeat deformation capability. We conducted tests with the Proteus using real-time GPS with sub-meter accuracy to see if pilots could fly the aircraft within the desired tube. Our results show that pilots are unable to fly the aircraft with the desired accuracy and therefore an augmented autopilot will be required to meet these objectives. Based on the Proteus flying altitude of 13.7 km (45,000 ft), we are designing a fully polarimetric L-band radar with 80 MHz bandwidth and 16 km range swath. This radar will have an active electronic beam steering antenna to achieve Doppler centroid stability that is necessary for repeat-pass interferometry (RPI). This paper will present are design criteria, current design and expected science applications.

radar↗
NASA NTRS2017

Detection and Use of Load and Gage Output Repeats of Wind Tunnel Strain-Gage Balance Data

Criteria are discussed that may be used for the detection of load and gage output repeats of wind tunnel strain-gage balance data. First, empirical thresholds are introduced that help determine if the loads or electrical outputs of a pair of balance calibration or check load data points match. A threshold of 0.01 percent of the load capacity is suggested for the identification of matching loads. Similarly, a threshold of 0.1 microV/V is recommended for the identification of matching electrical outputs. Two examples for the use of load and output repeats are discussed to illustrate benefits of the implementation of a repeat point detection algorithm in a balance data analysis software package. The first example uses the suggested load threshold to identify repeat data points that may be used to compute pure errors of the balance loads. This type of analysis may reveal hidden data quality issues that could potentially be avoided by making calibration process improvements. The second example uses the electrical output threshold for the identification of balance fouling. Data from the calibration of a six-component force balance is used to illustrate the calculation of the pure error of the balance loads.

strain-gage balance↗
DOE OSTI2021

Monomer-scale design of functional protein polymers using consensus repeat sequences

Protein-based polymers possess chemically defined sequences that can encode diverse properties and functions into a new class of biopolymeric materials. However, sequence variation that emerges from evolution can obscure the sequence–function relationships of naturally derived polymers. One strategy to clarify these relationships is to identify common sequences between proteins with similar functions. These conserved sequences often emerge from repeat proteins, and “consensus repeat sequences” provide a convenient platform for systematic investigations of biopolymer sequence–property relationships. In this review, we highlight recent approaches to engineer tunable polymeric materials using monomer-scale design of consensus repeat proteins. Here, we explore established and emerging protein-based materials with mechanical resilience, thermodynamic phase behavior, chemical responsiveness, biomolecular transport, and hierarchical structure. Overall, recent advances in the monomer-scale design of repetitive protein polymers present exciting fundamental and translational opportunities for polymer scientists and engineers.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Quantum repeaters based on concatenated bosonic and discrete-variable quantum codes

Abstract We propose an architecture of quantum-error-correction-based quantum repeaters that combines techniques used in discrete- and continuous-variable quantum information. Specifically, we propose to encode the transmitted qubits in a concatenated code consisting of two levels. On the first level we use a continuous-variable GKP code encoding the qubit in a single bosonic mode. On the second level we use a small discrete-variable code. Such an architecture has two important features. Firstly, errors on each of the two levels are corrected in repeaters of two different types. This enables for achieving performance needed in practical scenarios with a reduced cost with respect to an architecture for which all repeaters are the same. Secondly, the use of continuous-variable GKP code on the lower level generates additional analog information which enhances the error-correcting capabilities of the second-level code such that long-distance communication becomes possible with encodings consisting of only four or seven optical modes.

Physics↗
DOE OSTI2023

Hallucination of closed repeat proteins containing central pockets

In pseudocyclic proteins, such as TIM barrels, β barrels, and some helical transmembrane channels, a single subunit is repeated in a cyclic pattern, giving rise to a central cavity that can serve as a pocket for ligand binding or enzymatic activity. Inspired by these proteins, we devised a deep-learning-based approach to broadly exploring the space of closed repeat proteins starting from only a specification of the repeat number and length. Biophysical data for 38 structurally diverse pseudocyclic designs produced in Escherichia coli are consistent with the design models, and the three crystal structures we were able to obtain are very close to the designed structures. Docking studies suggest the diversity of folds and central pockets provide effective starting points for designing small-molecule binders and enzymes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Structure of native four-repeat satellite III sequence with non-canonical base interactions

Abstract Tandem-repetitive DNA (where two or more DNA bases are repeated numerous times) can adopt non-canonical secondary structures. Many of these structures are implicated in important biological processes. Human Satellite III (HSat3) is enriched for tandem repeats of the sequence ATGGA and is located in pericentromeric heterochromatin in many human chromosomes. Here, we investigate the secondary structure of the four-repeat HSat3 sequence 5′-ATGGA ATGGA ATGGA ATGGA-3′ using X-ray crystallography, NMR, and biophysical methods. Circular dichroism spectroscopy, thermal stability, native PAGE, and analytical ultracentrifugation indicate that this sequence folds into a monomolecular hairpin with non-canonical base pairing and B-DNA characteristics at concentrations below 0.9 mM. NMR studies at 0.05–0.5 mM indicate that the hairpin is likely folded-over into a compact structure with high dynamics. Crystallographic studies at 2.5 mM reveal an antiparallel self-complementary duplex with the same base pairing as in the hairpin, extended into an infinite polymer. The non-canonical base pairing includes a G–G intercalation sandwiched by sheared A–G base pairs, leading to a cross-strand four guanine stack, so called guanine zipper. The guanine zippers are spaced throughout the structure by A–T/T–A base pairs. Our findings lend further insight into recurring structural motifs associated with the HSat3 and their potential biological functions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Searching for gravitational waves with strongly lensed repeating fast radio bursts

We report that since their serendipitous discovery, fast radio bursts (FRBs) have garnered a great deal of attention from both observers and theorists. A new class of radio telescopes with wide fields of view have enabled a rapid accumulation of FRB observations, confirming that FRBs originate from cosmological distances. The high occurrence rate of FRBs and the development of new instruments to observe them create opportunities for FRBs to be utilized for a host of astrophysical and cosmological studies. We focus on the rare, and as yet undetected, subset of FRBs that undergo repeated bursts and are strongly gravitationally lensed by intervening structure. An extremely precise timing of burst arrival times is possible for strongly lensed repeating FRBs, and we show how this timing precision enables the search for long-wavelength gravitational waves, including those sourced by supermassive black hole binary systems. The timing of burst arrival for strongly lensed repeating FRBs is sensitive to gravitational-wave sources near the FRB host galaxy, which may lie at cosmological distances and would therefore be extremely challenging to detect by other means. Timing of strongly lensed FRBs can also be combined with pulsar timing array data to search for correlated time delays characteristic of gravitational waves passing through the Earth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Repeated gravitational wave bursts from cosmic strings

A characteristic observational signature of cosmic strings are short duration gravitational wave (GW) bursts. These have been searched for by the LIGO-Virgo-KAGRA (LVK) Collaboration and will be searched for with LISA. We point out that these burst signals are repeated, since cosmic string loops evolve quasiperiodically in time, and will always appear from essentially the same position in the sky. We estimate the number of GW repeaters for LVK and LISA and show that the string tension that can be probed scales as detector sensitivity to the sixth power, which raises hope for detection in future GW detectors. Furthermore, the observation of repeated GW bursts from the same cosmic string loop helps distinguish between the GW waveform parameters and the sky localization.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Modifying Network Guided Vehicle for Repeatable EcoCAR ACC Energy Testing

The newest iteration of the Department of Energy (DOE) Advanced Vehicle Technology Competitions is the EcoCAR Mobility Challenge. In this paper, ANL and HORIBA MIRA collaborate to propose and pilot a test method that enables controlled, repeatable track-based energy consumption testing of semi-autonomous features. The testing was performed at MIRA’s proving ground facility in Nuneaton, UK, using their Network Guided Vehicle (NGV) connectivity and automation test platform. The NGV served as a repeatable lead vehicle following prescribed drive traces around two different track circuits while the host vehicle under test, a Honda Civic with full speed range Adaptive Cruise Control, followed behind. Over the course of a two day test, multiple iterations of certification and custom EPA drive traces were performed on track, demonstrating the viability of a two vehicle energy test. Results were analyzed to assess NGV lead vehicle performance in following the prescribed cycle using SAE J2951 standard calculations in an effort to quantify how repeatably and accurately the lead vehicle followed the trace. Host vehicle energy consumption was assessed using both vehicle CAN bus monitoring and an on-board fuel flow meter.

ACC↗
NASA NTRS1972

An assessment of repeated loads on general aviation and transport aircraft.

An assessment is made of recent repeated loads data from short-haul jet transports and several general aviation airplanes. The jet transport data indicate that except for check flight maneuvers the load histories are essentially independent of operator and airplane type. General aviation data show a large amount of scatter in the repeated load history. The use and geographical location of operations may be the primary means of specifying the repeated loads environment.

Donely, P.↗
NASA NTRS1978

Performances of regenerative and non-regenerative satellite repeaters with MPSK signalling

Linear (translation), hard-limited, and demod/remod types of satellite repeaters are considered in this paper. Both uncoded and coded multiple phase shift keyed (MPSK) signals are assumed to be transmitted through these repeaters. Relative performances of these repeaters in the presence of uplink and downlink noises are then compared quantitatively. Probabilities of bit errors and the computational cutoff rates are computed for 2, 4, and 8 phases PSK signals, with uplink and downlink SNRs as parameters.

Woo, K. T.↗
NASA NTRS1992

More About Gravitational Bumps And Repeating Orbits

Improved algorithm reduces computation needed to estimate dynamics affecting trajectory of satellite in orbit around Earth with approximately repeating ground track. Underlying concepts presented in "Computing Gravitational Bumps From Repeating-Orbit Data", (NPO-17925). Satellite presumed to undergo same gravitational perturbation upon each near-repetition. Tracking data from multiple nearly repeating arcs collected into segments called "bins" and processed together to reduce effects of random errors, and thereby obtain more-accurate estimates of dynamical parameters. Bumps in gravitational field of Earth estimated with less computation.

Wu, Jiun-Tsong↗
NASA NTRS1993

Extending substructure based iterative solvers to multiple load and repeated analyses

Direct solvers currently dominate commercial finite element structural software, but do not scale well in the fine granularity regime targeted by emerging parallel processors. Substructure based iterative solvers--often called also domain decomposition algorithms--lend themselves better to parallel processing, but must overcome several obstacles before earning their place in general purpose structural analysis programs. One such obstacle is the solution of systems with many or repeated right hand sides. Such systems arise, for example, in multiple load static analyses and in implicit linear dynamics computations. Direct solvers are well-suited for these problems because after the system matrix has been factored, the multiple or repeated solutions can be obtained through relatively inexpensive forward and backward substitutions. On the other hand, iterative solvers in general are ill-suited for these problems because they often must restart from scratch for every different right hand side. In this paper, we present a methodology for extending the range of applications of domain decomposition methods to problems with multiple or repeated right hand sides. Basically, we formulate the overall problem as a series of minimization problems over K-orthogonal and supplementary subspaces, and tailor the preconditioned conjugate gradient algorithm to solve them efficiently. The resulting solution method is scalable, whereas direct factorization schemes and forward and backward substitution algorithms are not. We illustrate the proposed methodology with the solution of static and dynamic structural problems, and highlight its potential to outperform forward and backward substitutions on parallel computers. As an example, we show that for a linear structural dynamics problem with 11640 degrees of freedom, every time-step beyond time-step 15 is solved in a single iteration and consumes 1.0 second on a 32 processor iPSC-860 system; for the same problem and the same parallel processor, a pair of forward/backward substitutions at each step consumes 15.0 seconds.

Farhat, Charbel↗
NASA NTRS1994

Postburst nebular emission of soft gamma-ray repeaters

The soft gamma ray repeater SGR 1806-20 has been shown to be unambiguously associated with the central region of the radio nebula G10.0-0.3. The nebula surrounding SGR 1806-20 is probably a supernova remnant and has a nonthermal radio spectrum typical of a 'plerion,' circumstellar gas energized by a relativistic particle outflow from a central source. The association of soft gamma ray repeaters (SGRs) with supernova remnants is supported by the likely association of another repeater, SGR 0525-66, with the nebula N49 in the Large Magellanic Cloud. Gas nebulae surrounding SGRs provide ideal calorimeters to tap both the impulsive and steady state energy released from these bursting sources. We discuss in this Letter a simple model of high-energy emission produced by impulsive release of relativistic particles in nebulae surrounding SGRs following bursting episodes. This nebular X-ray and gamma ray emission can be detected and monitored by ROSAT, ASCA, and the Compton Gamma Ray Observatory.

Tavani, Marco↗
NASA NTRS1995

Photon-splitting limits to the hardness of emission in strongly magnetized soft gamma repeaters

Soft gamma repeaters are characterized by recurrent activity consisting of short-duration outbursts of high-energy emission that is typically of temperature less than 40 keV. One recent model of repeaters is that they originate in the environs of neutron stars with superstrong magnetic fields, perhaps greater than 10(exp 14) G. In such fields, the exotic process of magnetic photon splitting gamma yields gamma gamma acts very effectively to reprocess gamma-ray radiation down to hard X-ray energies. In this Letter, the action of photon splitting is considered in some detail, via the solution of photon kinetic equations, determining how it limits the hardness of emission in strongly magnetized repeaters, and thereby obtaining observational constraints to the field in SGR 1806-20.

Baring, Matthew G.↗
NASA NTRS1995

Repeating sources of classical gamma-ray bursts

From an analysis of the first catalog of the Burst and Transient Source Experiment (BATSE) experiment (Fishman et al. 1993, 1994a) on the Compton Gamma Ray Observatory (CGRO), we find an excessive number of pairs of gamma-ray bursts which are clustered in both a space and time . The angular separation between the two bursts in each pair is less than their positional uncertainties, and the interval between their occurrence times is within several days. Optimizing the signal, we find that the probability of observing such a clustered excess froma Poisson ensemble is approximately 2 x 10(exp -5). We suggest that these bursts arise from repeating sources. A detailed study of the most prolific source, GBS 0855-00, is presented in a separate paper (Wang & Lingenfelter 1993a, b). Unlike most of the 'soft' gamma-ray repeaters, these repeating bursts have relatively hard spectra, complex light curves, and widely varying durations, that are indistinguishable from classical gamma-ray bursts. Although the significance of the clustered excess was optimized a posteriori, because it depends on temporal and spatial bin sized that could not be defined a priori, we can use the optimizations from the first catalog to test subsequent BATSE data sets. Unfortunately, the failure of the on-board tape recorders during the second catalog period seriously reduced the number of accurately positioned bursts (Fishman et al. 1994b), so that we can neither confirm, nor refute, the predicted repitition in that sample, and we must await the results of the third catalog.

Wang, V. C.↗